Thanks Thanks:  0
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 11
  1. #1
    Anfänger
    Registriert seit
    14.05.2014
    Beiträge
    10
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten

    Box hängt sich ständig auf wenn...

    Moin,

    hoffe hier kann man mir helfen?

    Habe bis gestern OpenPli genutzt, bin die Nacht über auf OpenATV umgestiegen.
    Habe gehoft ein wichtiges Problem dadrch zu beheben, aber pustekuchen...leider :-(

    sehr häufig wenn ich den Mediaplayer oder EMC öffnen möchte, erscheint oben der Ladekreis und nix geht mehr.
    Leider ist es bei eiden Images der Fall...dann hilft hier nur hinten den Hauptschalter zu betätigen.
    Das kann ja keine dauerhafte Lösung sein oder?

    Hat jemand eine Idee was hier los sein könnte?

    •   Alt Advertising

       

  2. #2
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Wenn du den Dauerspinner (DS), so nennen wir den "Ladekreis", hast dann bitte var/log/messages posten, vielleicht sieht man da das Problem.



  3. #3
    Anfänger
    Registriert seit
    14.05.2014
    Beiträge
    10
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Code:
    Jan  1 01:00:24 et9x00 syslog.info syslogd started: BusyBox v1.21.1
    Jan  1 01:00:24 et9x00 user.notice kernel: klogd started: BusyBox v1.21.1 (2014-02-24 06:31:56 CET)
    Jan  1 01:00:24 et9x00 user.warn kernel: Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
    Jan  1 01:00:24 et9x00 user.info kernel: SMP: CPU1 is running
    Jan  1 01:00:24 et9x00 user.info kernel: Brought up 2 CPUs
    Jan  1 01:00:24 et9x00 user.info kernel: devtmpfs: initialized
    Jan  1 01:00:24 et9x00 user.info kernel: NET: Registered protocol family 16
    Jan  1 01:00:24 et9x00 user.info kernel: USB0: power enable is active low; overcurrent is active low
    Jan  1 01:00:24 et9x00 user.info kernel: PCI2.3->SDRAM window: 512 MB
    Jan  1 01:00:24 et9x00 user.info kernel: bio: create slab <bio-0> at 0
    Jan  1 01:00:24 et9x00 user.notice kernel: SCSI subsystem initialized
    Jan  1 01:00:24 et9x00 user.debug kernel: libata version 3.00 loaded.
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver usbfs
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver hub
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new device driver usb
    Jan  1 01:00:24 et9x00 user.info kernel: Linux video capture interface: v2.00
    Jan  1 01:00:24 et9x00 user.info kernel: Advanced Linux Sound Architecture Driver Initialized.
    Jan  1 01:00:24 et9x00 user.info kernel: PCI host bridge to bus 0000:00
    Jan  1 01:00:24 et9x00 user.info kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
    Jan  1 01:00:24 et9x00 user.info kernel: pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
    Jan  1 01:00:24 et9x00 user.info kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    Jan  1 01:00:24 et9x00 user.debug kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
    Jan  1 01:00:24 et9x00 user.info kernel: PCI host bridge to bus 0000:01
    Jan  1 01:00:24 et9x00 user.info kernel: pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
    Jan  1 01:00:24 et9x00 user.info kernel: pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
    Jan  1 01:00:24 et9x00 user.info kernel: pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
    Jan  1 01:00:24 et9x00 user.debug kernel: pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
    Jan  1 01:00:24 et9x00 user.info kernel: PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
    Jan  1 01:00:24 et9x00 user.debug kernel: pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
    Jan  1 01:00:24 et9x00 user.debug kernel: pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
    Jan  1 01:00:24 et9x00 user.debug kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
    Jan  1 01:00:24 et9x00 user.info kernel: pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
    Jan  1 01:00:24 et9x00 user.info kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: Core ver 2.16
    Jan  1 01:00:24 et9x00 user.info kernel: NET: Registered protocol family 31
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: HCI device and connection manager initialized
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: HCI socket layer initialized
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: L2CAP socket layer initialized
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: SCO socket layer initialized
    Jan  1 01:00:24 et9x00 user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jan  1 01:00:24 et9x00 user.info kernel: Switching to clocksource upg
    Jan  1 01:00:24 et9x00 user.notice kernel: FS-Cache: Loaded
    Jan  1 01:00:24 et9x00 user.info kernel: NET: Registered protocol family 2
    Jan  1 01:00:24 et9x00 user.info kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    Jan  1 01:00:24 et9x00 user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    Jan  1 01:00:24 et9x00 user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
    Jan  1 01:00:24 et9x00 user.info kernel: TCP: reno registered
    Jan  1 01:00:24 et9x00 user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
    Jan  1 01:00:24 et9x00 user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    Jan  1 01:00:24 et9x00 user.info kernel: NET: Registered protocol family 1
    Jan  1 01:00:24 et9x00 user.info kernel: RPC: Registered named UNIX socket transport module.
    Jan  1 01:00:24 et9x00 user.info kernel: RPC: Registered udp transport module.
    Jan  1 01:00:24 et9x00 user.info kernel: RPC: Registered tcp transport module.
    Jan  1 01:00:24 et9x00 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan  1 01:00:24 et9x00 user.debug kernel: PCI: CLS 0 bytes, default 64
    Jan  1 01:00:24 et9x00 user.notice kernel: NFS: Registering the id_resolver key type
    Jan  1 01:00:24 et9x00 user.notice kernel: Key type id_resolver registered
    Jan  1 01:00:24 et9x00 user.notice kernel: Key type id_legacy registered
    Jan  1 01:00:24 et9x00 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Jan  1 01:00:24 et9x00 user.info kernel: fuse init (API version 7.20)
    Jan  1 01:00:24 et9x00 user.info kernel: msgmni has been set to 567
    Jan  1 01:00:24 et9x00 user.info kernel: io scheduler noop registered
    Jan  1 01:00:24 et9x00 user.info kernel: io scheduler cfq registered (default)
    Jan  1 01:00:24 et9x00 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan  1 01:00:24 et9x00 user.info kernel: serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
    Jan  1 01:00:24 et9x00 user.info kernel: console [ttyS0] enabled
    Jan  1 01:00:24 et9x00 user.info kernel: serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
    Jan  1 01:00:24 et9x00 user.info kernel: serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
    Jan  1 01:00:24 et9x00 user.info kernel: loop: module loaded
    Jan  1 01:00:24 et9x00 user.debug kernel: sata_brcmstb 0000:01:00.0: version 4.0
    Jan  1 01:00:24 et9x00 user.debug kernel: __clk_enable: sata [1]
    Jan  1 01:00:24 et9x00 user.warn kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
    Jan  1 01:00:24 et9x00 user.debug kernel: sata_brcmstb 0000:01:00.0: setting latency timer to 64
    Jan  1 01:00:24 et9x00 user.info kernel: scsi0 : sata_brcmstb
    Jan  1 01:00:24 et9x00 user.info kernel: scsi1 : sata_brcmstb
    Jan  1 01:00:24 et9x00 user.info kernel: ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
    Jan  1 01:00:24 et9x00 user.info kernel: ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
    Jan  1 01:00:24 et9x00 user.info kernel: Broadcom STB NAND controller (BrcmNand Controller)
    Jan  1 01:00:24 et9x00 user.info kernel: bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    Jan  1 01:00:24 et9x00 user.info kernel: bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:16:b4:05:92:98)
    Jan  1 01:00:24 et9x00 user.info kernel: bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver zd1201
    Jan  1 01:00:24 et9x00 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan  1 01:00:24 et9x00 user.debug kernel: __clk_enable: usb [1]
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:24 et9x00 user.info kernel: hub 1-0:1.0: USB hub found
    Jan  1 01:00:24 et9x00 user.info kernel: hub 1-0:1.0: 2 ports detected
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
    Jan  1 01:00:24 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:24 et9x00 user.info kernel: hub 2-0:1.0: USB hub found
    Jan  1 01:00:24 et9x00 user.info kernel: hub 2-0:1.0: 2 ports detected
    Jan  1 01:00:24 et9x00 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan  1 01:00:24 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    Jan  1 01:00:24 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    Jan  1 01:00:24 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
    Jan  1 01:00:24 et9x00 user.info kernel: hub 3-0:1.0: USB hub found
    Jan  1 01:00:24 et9x00 user.info kernel: hub 3-0:1.0: 2 ports detected
    Jan  1 01:00:24 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    Jan  1 01:00:24 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
    Jan  1 01:00:24 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
    Jan  1 01:00:24 et9x00 user.info kernel: hub 4-0:1.0: USB hub found
    Jan  1 01:00:24 et9x00 user.info kernel: hub 4-0:1.0: 2 ports detected
    Jan  1 01:00:24 et9x00 user.info kernel: Initializing USB Mass Storage driver...
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver usb-storage
    Jan  1 01:00:24 et9x00 user.info kernel: USB Mass Storage support registered.
    Jan  1 01:00:24 et9x00 user.info kernel: mousedev: PS/2 mouse device common for all mice
    Jan  1 01:00:24 et9x00 user.info kernel: i2c /dev entries driver
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver btusb
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver usbhid
    Jan  1 01:00:24 et9x00 user.info kernel: usbhid: USB HID core driver
    Jan  1 01:00:24 et9x00 user.info kernel: TCP: cubic registered
    Jan  1 01:00:24 et9x00 user.info kernel: NET: Registered protocol family 17
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Jan  1 01:00:24 et9x00 user.info kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan  1 01:00:24 et9x00 user.info kernel: Bluetooth: HIDP socket layer initialized
    Jan  1 01:00:24 et9x00 user.info kernel: ata1.00: ATA-8: SAMSUNG HM400JI, 2AC101C4, max UDMA/133
    Jan  1 01:00:24 et9x00 user.notice kernel: Key type dns_resolver registered
    Jan  1 01:00:24 et9x00 user.info kernel: EBI CS1: setting up NAND flash (primary)
    Jan  1 01:00:24 et9x00 user.info kernel: mtd->oobsize=0, mtd->eccOobSize=0
    Jan  1 01:00:24 et9x00 user.warn kernel: NAND_CS_NAND_XOR=00000000
    Jan  1 01:00:24 et9x00 user.warn kernel: B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1
    Jan  1 01:00:24 et9x00 user.warn kernel: brcmnand_read_id: CS1: dev_id=ecda1095
    Jan  1 01:00:24 et9x00 user.warn kernel: After: NandSelect=50000200, nandConfig=16152300
    Jan  1 01:00:24 et9x00 user.warn kernel: Block size=00020000, erase shift=17
    Jan  1 01:00:24 et9x00 user.info kernel: NAND Config: Reg=16152300, chipSize=256 MB, blockSize=128K, erase_shift=11
    Jan  1 01:00:24 et9x00 user.info kernel: busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    Jan  1 01:00:24 et9x00 user.warn kernel: timing1 not adjusted: 5363444f
    Jan  1 01:00:24 et9x00 user.warn kernel: timing2 not adjusted: 00000fc6
    Jan  1 01:00:24 et9x00 user.warn kernel: eccLevel=15, 1Ksector=0, oob=16
    Jan  1 01:00:24 et9x00 user.warn kernel: nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
    Jan  1 01:00:24 et9x00 user.warn kernel: <--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
    Jan  1 01:00:24 et9x00 user.info kernel: BrcmNAND mfg ec da Samsung K9F2G08U0A 256MB on CS1
    Jan  1 01:00:24 et9x00 user.info kernel: Found NAND on CS1: ACC=d7ff1010, cfg=16152300, flashId=ecda1095, tim1=5363444f, tim2=00000fc6
    Jan  1 01:00:24 et9x00 user.info kernel: BrcmNAND version = 0x0302 256MB @00000000
    Jan  1 01:00:24 et9x00 user.warn kernel: B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1
    Jan  1 01:00:24 et9x00 user.warn kernel: brcmnand_read_id: CS1: dev_id=ecda1095
    Jan  1 01:00:24 et9x00 user.warn kernel: After: NandSelect=50000200, nandConfig=16152300
    Jan  1 01:00:24 et9x00 user.warn kernel: Found NAND flash on Chip Select 1, chipSize=256MB, usable size=256MB, base=0
    Jan  1 01:00:24 et9x00 user.warn kernel: brcmnand_scan: B4 nand_select = 50000200
    Jan  1 01:00:24 et9x00 user.warn kernel: brcmnand_scan: After nand_select = 50000200
    Jan  1 01:00:24 et9x00 user.info kernel: page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17
    Jan  1 01:00:24 et9x00 user.info kernel: Brcm NAND controller version = 3.2 NAND flash size 256MB @10000000
    Jan  1 01:00:24 et9x00 user.warn kernel: ECC layout=brcmnand_oob_bch4_4k
    Jan  1 01:00:24 et9x00 user.info kernel: brcmnand_scan:  mtd->oobsize=64
    Jan  1 01:00:24 et9x00 user.info kernel: brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    Jan  1 01:00:24 et9x00 user.info kernel: brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    Jan  1 01:00:24 et9x00 user.warn kernel: -->brcmnand_default_bbt
    Jan  1 01:00:24 et9x00 user.warn kernel: brcmnand_default_bbt: bbt_td = bbt_main_descr
    Jan  1 01:00:24 et9x00 user.debug kernel: Bad block table Bbt0 found at page 0001ffc0, version 0x01 for chip on CS1
    Jan  1 01:00:24 et9x00 user.debug kernel: Bad block table 1tbB found at page 0001ff80, version 0x01 for chip on CS1
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x01080000
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x03f40000
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x05ee0000
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x07020000
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x07080000
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x092e0000
    Jan  1 01:00:24 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x0d640000
    Jan  1 01:00:24 et9x00 user.warn kernel: Adjust partition complete size from entire device to ff00000 to avoid overlap with BBT reserved space
    Jan  1 01:00:24 et9x00 user.warn kernel: Adjust partition rootfs size from entire device to f900000 to avoid overlap with BBT reserved space
    Jan  1 01:00:24 et9x00 user.notice kernel: Creating 3 MTD partitions on "brcmnand.0":
    Jan  1 01:00:24 et9x00 user.notice kernel: 0x000000000000-0x00000ff00000 : "complete"
    Jan  1 01:00:24 et9x00 user.info kernel: usb 2-1: new high-speed USB device number 2 using ehci-brcm
    Jan  1 01:00:24 et9x00 user.info kernel: ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32)
    Jan  1 01:00:24 et9x00 user.notice kernel: 0x000000000000-0x000000600000 : "kernel"
    Jan  1 01:00:24 et9x00 user.notice kernel: 0x000000600000-0x00000ff00000 : "rootfs"
    Jan  1 01:00:24 et9x00 user.info kernel: PM: CP0 COUNT/COMPARE frequency depends on divisor
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: attaching mtd2 to ubi0
    Jan  1 01:00:24 et9x00 user.info kernel: ata1.00: configured for UDMA/133
    Jan  1 01:00:24 et9x00 user.notice kernel: scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM400JI  2AC1 PQ: 0 ANSI: 5
    Jan  1 01:00:24 et9x00 user.notice kernel: sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
    Jan  1 01:00:24 et9x00 user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
    Jan  1 01:00:24 et9x00 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan  1 01:00:24 et9x00 user.info kernel: hub 2-1:1.0: USB hub found
    Jan  1 01:00:24 et9x00 user.info kernel: hub 2-1:1.0: 4 ports detected
    Jan  1 01:00:24 et9x00 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan  1 01:00:24 et9x00 user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan  1 01:00:24 et9x00 user.info kernel: usb 2-1.2: new full-speed USB device number 3 using ehci-brcm
    Jan  1 01:00:24 et9x00 user.info kernel: ata2: SATA link down (SStatus 4 SControl 300)
    Jan  1 01:00:24 et9x00 user.info kernel:  sda: sda1
    Jan  1 01:00:24 et9x00 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: scanning is finished
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: attached mtd2 (name "rootfs", size 249 MiB) to ubi0
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: good PEBs: 1985, bad PEBs: 7, corrupted PEBs: 0
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1277471309
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 1985, PEBs reserved for bad PEB handling: 33
    Jan  1 01:00:24 et9x00 user.info kernel: ALSA device list:
    Jan  1 01:00:24 et9x00 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 50
    Jan  1 01:00:24 et9x00 user.info kernel:   No soundcards found.
    Jan  1 01:00:24 et9x00 user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 51
    Jan  1 01:00:24 et9x00 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
    Jan  1 01:00:24 et9x00 user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    Jan  1 01:00:24 et9x00 user.notice kernel: UBIFS: FS size: 245952512 bytes (234 MiB, 1937 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    Jan  1 01:00:24 et9x00 user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
    Jan  1 01:00:24 et9x00 user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7512757F-9C25-4D9B-8525-5A1DA4D814BF, small LPT model
    Jan  1 01:00:24 et9x00 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:10.
    Jan  1 01:00:24 et9x00 user.info kernel: devtmpfs: mounted
    Jan  1 01:00:24 et9x00 user.info kernel: Freeing unused kernel memory: 300k freed
    Jan  1 01:00:24 et9x00 user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jan  1 01:00:24 et9x00 user.info kernel: usbcore: registered new interface driver tpm
    Jan  1 01:00:24 et9x00 user.warn kernel: dvb: module_layout: kernel tainted.
    Jan  1 01:00:24 et9x00 user.warn kernel: Disabling lock debugging due to kernel taint
    Jan  1 01:00:24 et9x00 user.info kernel: input: dreambox remote control (native) as /devices/virtual/input/input0
    Jan  1 01:00:24 et9x00 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    Jan  1 01:00:24 et9x00 user.info kernel: DVB: registering new adapter (dvb0)
    Jan  1 01:00:24 et9x00 user.info kernel: platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
    Jan  1 01:00:24 et9x00 user.info kernel: platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
    Jan  1 01:00:24 et9x00 user.info kernel: input: front panel as /devices/virtual/input/input2
    Jan  1 01:00:24 et9x00 user.info kernel: NET: Registered protocol family 10
    Jan  1 01:00:24 et9x00 user.warn kernel: svc: failed to register lockdv1 RPC service (errno 124).
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Found user 'avahi' (UID 998) and group 'avahi' (GID 998).
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Successfully dropped root privileges.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: avahi-daemon 0.6.31 starting up.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Successfully called chroot().
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Successfully dropped remaining capabilities.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Loading service file /services/sftp-ssh.service.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Loading service file /services/ssh.service.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.2.104.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: New relevant interface eth0.IPv4 for mDNS.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Network interface enumeration completed.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Registering new address record for fe80::216:b4ff:fe05:9298 on eth0.*.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Registering new address record for 192.168.2.104 on eth0.IPv4.
    Jan  1 01:00:24 et9x00 daemon.info avahi-daemon[491]: Registering HINFO record with values 'MIPS'/'LINUX'.
    Jan  1 01:00:25 et9x00 daemon.info avahi-daemon[491]: Server startup complete. Host name is et9x00.local. Local service cookie is 2580056912.
    Jan  1 01:00:26 et9x00 daemon.info avahi-daemon[491]: Service "et9x00" (/services/ssh.service) successfully established.
    Jan  1 01:00:26 et9x00 daemon.info avahi-daemon[491]: Service "et9x00" (/services/sftp-ssh.service) successfully established.
    May 14 10:15:56 et9x00 daemon.notice ntpdate[397]: step time server 78.46.197.35 offset 1400055327.906201 sec
    May 14 10:16:29 et9x00 cron.err crond[454]: time disparity of 23334256 minutes detected

    reicht das so?
    Geändert von Thomas4711 (15.05.2014 um 19:56 Uhr)

  4. #4
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Du mußt das zu dem Zeitpunkt schicken wenn du den DS hast und dann am besten alles.



  5. #5
    Anfänger
    Registriert seit
    14.05.2014
    Beiträge
    10
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    habe wieder nen spinner...

    Code:
    Jan  1 01:00:27 et9x00 syslog.info syslogd started: BusyBox v1.21.1
    Jan  1 01:00:27 et9x00 user.notice kernel: klogd started: BusyBox v1.21.1 (2014-02-24 06:31:56 CET)
    Jan  1 01:00:27 et9x00 user.info kernel: Brought up 2 CPUs
    Jan  1 01:00:27 et9x00 user.info kernel: devtmpfs: initialized
    Jan  1 01:00:27 et9x00 user.info kernel: NET: Registered protocol family 16
    Jan  1 01:00:27 et9x00 user.info kernel: USB0: power enable is active low; overcurrent is active low
    Jan  1 01:00:27 et9x00 user.info kernel: PCI2.3->SDRAM window: 512 MB
    Jan  1 01:00:27 et9x00 user.info kernel: bio: create slab <bio-0> at 0
    Jan  1 01:00:27 et9x00 user.notice kernel: SCSI subsystem initialized
    Jan  1 01:00:27 et9x00 user.debug kernel: libata version 3.00 loaded.
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver usbfs
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver hub
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new device driver usb
    Jan  1 01:00:27 et9x00 user.info kernel: Linux video capture interface: v2.00
    Jan  1 01:00:27 et9x00 user.info kernel: Advanced Linux Sound Architecture Driver Initialized.
    Jan  1 01:00:27 et9x00 user.info kernel: PCI host bridge to bus 0000:00
    Jan  1 01:00:27 et9x00 user.info kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
    Jan  1 01:00:27 et9x00 user.info kernel: pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
    Jan  1 01:00:27 et9x00 user.info kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    Jan  1 01:00:27 et9x00 user.debug kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
    Jan  1 01:00:27 et9x00 user.info kernel: PCI host bridge to bus 0000:01
    Jan  1 01:00:27 et9x00 user.info kernel: pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
    Jan  1 01:00:27 et9x00 user.info kernel: pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
    Jan  1 01:00:27 et9x00 user.info kernel: pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
    Jan  1 01:00:27 et9x00 user.debug kernel: pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
    Jan  1 01:00:27 et9x00 user.info kernel: PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
    Jan  1 01:00:27 et9x00 user.debug kernel: pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
    Jan  1 01:00:27 et9x00 user.debug kernel: pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
    Jan  1 01:00:27 et9x00 user.debug kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
    Jan  1 01:00:27 et9x00 user.info kernel: pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
    Jan  1 01:00:27 et9x00 user.info kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: Core ver 2.16
    Jan  1 01:00:27 et9x00 user.info kernel: NET: Registered protocol family 31
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: HCI device and connection manager initialized
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: HCI socket layer initialized
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: L2CAP socket layer initialized
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: SCO socket layer initialized
    Jan  1 01:00:27 et9x00 user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jan  1 01:00:27 et9x00 user.info kernel: Switching to clocksource upg
    Jan  1 01:00:27 et9x00 user.notice kernel: FS-Cache: Loaded
    Jan  1 01:00:27 et9x00 user.info kernel: NET: Registered protocol family 2
    Jan  1 01:00:27 et9x00 user.info kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    Jan  1 01:00:27 et9x00 user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    Jan  1 01:00:27 et9x00 user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
    Jan  1 01:00:27 et9x00 user.info kernel: TCP: reno registered
    Jan  1 01:00:27 et9x00 user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
    Jan  1 01:00:27 et9x00 user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    Jan  1 01:00:27 et9x00 user.info kernel: NET: Registered protocol family 1
    Jan  1 01:00:27 et9x00 user.info kernel: RPC: Registered named UNIX socket transport module.
    Jan  1 01:00:27 et9x00 user.info kernel: RPC: Registered udp transport module.
    Jan  1 01:00:27 et9x00 user.info kernel: RPC: Registered tcp transport module.
    Jan  1 01:00:27 et9x00 user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan  1 01:00:27 et9x00 user.debug kernel: PCI: CLS 0 bytes, default 64
    Jan  1 01:00:27 et9x00 user.notice kernel: NFS: Registering the id_resolver key type
    Jan  1 01:00:27 et9x00 user.notice kernel: Key type id_resolver registered
    Jan  1 01:00:27 et9x00 user.notice kernel: Key type id_legacy registered
    Jan  1 01:00:27 et9x00 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Jan  1 01:00:27 et9x00 user.info kernel: fuse init (API version 7.20)
    Jan  1 01:00:27 et9x00 user.info kernel: msgmni has been set to 567
    Jan  1 01:00:27 et9x00 user.info kernel: io scheduler noop registered
    Jan  1 01:00:27 et9x00 user.info kernel: io scheduler cfq registered (default)
    Jan  1 01:00:27 et9x00 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan  1 01:00:27 et9x00 user.info kernel: serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
    Jan  1 01:00:27 et9x00 user.info kernel: console [ttyS0] enabled
    Jan  1 01:00:27 et9x00 user.info kernel: serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
    Jan  1 01:00:27 et9x00 user.info kernel: serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
    Jan  1 01:00:27 et9x00 user.info kernel: loop: module loaded
    Jan  1 01:00:27 et9x00 user.debug kernel: sata_brcmstb 0000:01:00.0: version 4.0
    Jan  1 01:00:27 et9x00 user.debug kernel: __clk_enable: sata [1]
    Jan  1 01:00:27 et9x00 user.warn kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
    Jan  1 01:00:27 et9x00 user.debug kernel: sata_brcmstb 0000:01:00.0: setting latency timer to 64
    Jan  1 01:00:27 et9x00 user.info kernel: scsi0 : sata_brcmstb
    Jan  1 01:00:27 et9x00 user.info kernel: scsi1 : sata_brcmstb
    Jan  1 01:00:27 et9x00 user.info kernel: ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
    Jan  1 01:00:27 et9x00 user.info kernel: ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
    Jan  1 01:00:27 et9x00 user.info kernel: Broadcom STB NAND controller (BrcmNand Controller)
    Jan  1 01:00:27 et9x00 user.info kernel: bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    Jan  1 01:00:27 et9x00 user.info kernel: bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:16:b4:05:92:98)
    Jan  1 01:00:27 et9x00 user.info kernel: bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver zd1201
    Jan  1 01:00:27 et9x00 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan  1 01:00:27 et9x00 user.debug kernel: __clk_enable: usb [1]
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:27 et9x00 user.info kernel: hub 1-0:1.0: USB hub found
    Jan  1 01:00:27 et9x00 user.info kernel: hub 1-0:1.0: 2 ports detected
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
    Jan  1 01:00:27 et9x00 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:27 et9x00 user.info kernel: hub 2-0:1.0: USB hub found
    Jan  1 01:00:27 et9x00 user.info kernel: hub 2-0:1.0: 2 ports detected
    Jan  1 01:00:27 et9x00 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan  1 01:00:27 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    Jan  1 01:00:27 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    Jan  1 01:00:27 et9x00 user.info kernel: ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
    Jan  1 01:00:27 et9x00 user.info kernel: hub 3-0:1.0: USB hub found
    Jan  1 01:00:27 et9x00 user.info kernel: hub 3-0:1.0: 2 ports detected
    Jan  1 01:00:27 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    Jan  1 01:00:27 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
    Jan  1 01:00:27 et9x00 user.info kernel: ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
    Jan  1 01:00:27 et9x00 user.info kernel: hub 4-0:1.0: USB hub found
    Jan  1 01:00:27 et9x00 user.info kernel: hub 4-0:1.0: 2 ports detected
    Jan  1 01:00:27 et9x00 user.info kernel: Initializing USB Mass Storage driver...
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver usb-storage
    Jan  1 01:00:27 et9x00 user.info kernel: USB Mass Storage support registered.
    Jan  1 01:00:27 et9x00 user.info kernel: mousedev: PS/2 mouse device common for all mice
    Jan  1 01:00:27 et9x00 user.info kernel: i2c /dev entries driver
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver btusb
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver usbhid
    Jan  1 01:00:27 et9x00 user.info kernel: usbhid: USB HID core driver
    Jan  1 01:00:27 et9x00 user.info kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan  1 01:00:27 et9x00 user.info kernel: TCP: cubic registered
    Jan  1 01:00:27 et9x00 user.info kernel: NET: Registered protocol family 17
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Jan  1 01:00:27 et9x00 user.info kernel: Bluetooth: HIDP socket layer initialized
    Jan  1 01:00:27 et9x00 user.notice kernel: Key type dns_resolver registered
    Jan  1 01:00:27 et9x00 user.info kernel: EBI CS1: setting up NAND flash (primary)
    Jan  1 01:00:27 et9x00 user.info kernel: ata1.00: ATA-8: SAMSUNG HM400JI, 2AC101C4, max UDMA/133
    Jan  1 01:00:27 et9x00 user.info kernel: mtd->oobsize=0, mtd->eccOobSize=0
    Jan  1 01:00:27 et9x00 user.warn kernel: NAND_CS_NAND_XOR=00000000
    Jan  1 01:00:27 et9x00 user.warn kernel: B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1
    Jan  1 01:00:27 et9x00 user.warn kernel: brcmnand_read_id: CS1: dev_id=ecda1095
    Jan  1 01:00:27 et9x00 user.warn kernel: After: NandSelect=50000200, nandConfig=16152300
    Jan  1 01:00:27 et9x00 user.warn kernel: Block size=00020000, erase shift=17
    Jan  1 01:00:27 et9x00 user.info kernel: NAND Config: Reg=16152300, chipSize=256 MB, blockSize=128K, erase_shift=11
    Jan  1 01:00:27 et9x00 user.info kernel: busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    Jan  1 01:00:27 et9x00 user.warn kernel: timing1 not adjusted: 5363444f
    Jan  1 01:00:27 et9x00 user.warn kernel: timing2 not adjusted: 00000fc6
    Jan  1 01:00:27 et9x00 user.warn kernel: eccLevel=15, 1Ksector=0, oob=16
    Jan  1 01:00:27 et9x00 user.warn kernel: nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
    Jan  1 01:00:27 et9x00 user.warn kernel: <--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
    Jan  1 01:00:27 et9x00 user.info kernel: BrcmNAND mfg ec da Samsung K9F2G08U0A 256MB on CS1
    Jan  1 01:00:27 et9x00 user.info kernel: Found NAND on CS1: ACC=d7ff1010, cfg=16152300, flashId=ecda1095, tim1=5363444f, tim2=00000fc6
    Jan  1 01:00:27 et9x00 user.info kernel: BrcmNAND version = 0x0302 256MB @00000000
    Jan  1 01:00:27 et9x00 user.warn kernel: B4: NandSelect=50000200, nandConfig=16152300, chipSelect=1
    Jan  1 01:00:27 et9x00 user.warn kernel: brcmnand_read_id: CS1: dev_id=ecda1095
    Jan  1 01:00:27 et9x00 user.warn kernel: After: NandSelect=50000200, nandConfig=16152300
    Jan  1 01:00:27 et9x00 user.warn kernel: Found NAND flash on Chip Select 1, chipSize=256MB, usable size=256MB, base=0
    Jan  1 01:00:27 et9x00 user.warn kernel: brcmnand_scan: B4 nand_select = 50000200
    Jan  1 01:00:27 et9x00 user.warn kernel: brcmnand_scan: After nand_select = 50000200
    Jan  1 01:00:27 et9x00 user.info kernel: page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17
    Jan  1 01:00:27 et9x00 user.info kernel: Brcm NAND controller version = 3.2 NAND flash size 256MB @10000000
    Jan  1 01:00:27 et9x00 user.warn kernel: ECC layout=brcmnand_oob_bch4_4k
    Jan  1 01:00:27 et9x00 user.info kernel: brcmnand_scan:  mtd->oobsize=64
    Jan  1 01:00:27 et9x00 user.info kernel: brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    Jan  1 01:00:27 et9x00 user.info kernel: brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    Jan  1 01:00:27 et9x00 user.warn kernel: -->brcmnand_default_bbt
    Jan  1 01:00:27 et9x00 user.warn kernel: brcmnand_default_bbt: bbt_td = bbt_main_descr
    Jan  1 01:00:27 et9x00 user.debug kernel: Bad block table Bbt0 found at page 0001ffc0, version 0x01 for chip on CS1
    Jan  1 01:00:27 et9x00 user.debug kernel: Bad block table 1tbB found at page 0001ff80, version 0x01 for chip on CS1
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x01080000
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x03f40000
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x05ee0000
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x07020000
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x07080000
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x092e0000
    Jan  1 01:00:27 et9x00 user.debug kernel: nand_read_bbt: Bad block at 0x0d640000
    Jan  1 01:00:27 et9x00 user.warn kernel: Adjust partition complete size from entire device to ff00000 to avoid overlap with BBT reserved space
    Jan  1 01:00:27 et9x00 user.warn kernel: Adjust partition rootfs size from entire device to f900000 to avoid overlap with BBT reserved space
    Jan  1 01:00:27 et9x00 user.notice kernel: Creating 3 MTD partitions on "brcmnand.0":
    Jan  1 01:00:27 et9x00 user.notice kernel: 0x000000000000-0x00000ff00000 : "complete"
    Jan  1 01:00:27 et9x00 user.info kernel: usb 2-1: new high-speed USB device number 2 using ehci-brcm
    Jan  1 01:00:27 et9x00 user.info kernel: ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32)
    Jan  1 01:00:27 et9x00 user.notice kernel: 0x000000000000-0x000000600000 : "kernel"
    Jan  1 01:00:27 et9x00 user.notice kernel: 0x000000600000-0x00000ff00000 : "rootfs"
    Jan  1 01:00:27 et9x00 user.info kernel: PM: CP0 COUNT/COMPARE frequency depends on divisor
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: attaching mtd2 to ubi0
    Jan  1 01:00:27 et9x00 user.info kernel: ata1.00: configured for UDMA/133
    Jan  1 01:00:27 et9x00 user.notice kernel: scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM400JI  2AC1 PQ: 0 ANSI: 5
    Jan  1 01:00:27 et9x00 user.notice kernel: sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
    Jan  1 01:00:27 et9x00 user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
    Jan  1 01:00:27 et9x00 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan  1 01:00:27 et9x00 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan  1 01:00:27 et9x00 user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan  1 01:00:27 et9x00 user.info kernel: hub 2-1:1.0: USB hub found
    Jan  1 01:00:27 et9x00 user.info kernel: hub 2-1:1.0: 4 ports detected
    Jan  1 01:00:27 et9x00 user.info kernel:  sda: sda1
    Jan  1 01:00:27 et9x00 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan  1 01:00:27 et9x00 user.info kernel: usb 2-1.2: new full-speed USB device number 3 using ehci-brcm
    Jan  1 01:00:27 et9x00 user.info kernel: ata2: SATA link down (SStatus 4 SControl 300)
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: scanning is finished
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: attached mtd2 (name "rootfs", size 249 MiB) to ubi0
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: good PEBs: 1985, bad PEBs: 7, corrupted PEBs: 0
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1277471309
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 1985, PEBs reserved for bad PEB handling: 33
    Jan  1 01:00:27 et9x00 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 50
    Jan  1 01:00:27 et9x00 user.info kernel: ALSA device list:
    Jan  1 01:00:27 et9x00 user.info kernel:   No soundcards found.
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 51
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: recovery needed
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: recovery completed
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: FS size: 245952512 bytes (234 MiB, 1937 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
    Jan  1 01:00:27 et9x00 user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7512757F-9C25-4D9B-8525-5A1DA4D814BF, small LPT model
    Jan  1 01:00:27 et9x00 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:10.
    Jan  1 01:00:27 et9x00 user.info kernel: devtmpfs: mounted
    Jan  1 01:00:27 et9x00 user.info kernel: Freeing unused kernel memory: 300k freed
    Jan  1 01:00:27 et9x00 user.info kernel: EXT4-fs (sda1): recovery complete
    Jan  1 01:00:27 et9x00 user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jan  1 01:00:27 et9x00 user.info kernel: usbcore: registered new interface driver tpm
    Jan  1 01:00:27 et9x00 user.warn kernel: dvb: module_layout: kernel tainted.
    Jan  1 01:00:27 et9x00 user.warn kernel: Disabling lock debugging due to kernel taint
    Jan  1 01:00:27 et9x00 user.info kernel: input: dreambox remote control (native) as /devices/virtual/input/input0
    Jan  1 01:00:27 et9x00 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    Jan  1 01:00:27 et9x00 user.info kernel: DVB: registering new adapter (dvb0)
    Jan  1 01:00:27 et9x00 user.info kernel: platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
    Jan  1 01:00:27 et9x00 user.info kernel: platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
    Jan  1 01:00:27 et9x00 user.info kernel: input: front panel as /devices/virtual/input/input2
    Jan  1 01:00:27 et9x00 user.info kernel: NET: Registered protocol family 10
    Jan  1 01:00:27 et9x00 user.warn kernel: svc: failed to register lockdv1 RPC service (errno 124).
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Found user 'avahi' (UID 998) and group 'avahi' (GID 998).
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Successfully dropped root privileges.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: avahi-daemon 0.6.31 starting up.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Successfully called chroot().
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Successfully dropped remaining capabilities.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Loading service file /services/sftp-ssh.service.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Loading service file /services/ssh.service.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.2.104.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: New relevant interface eth0.IPv4 for mDNS.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Network interface enumeration completed.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Registering new address record for fe80::216:b4ff:fe05:9298 on eth0.*.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Registering new address record for 192.168.2.104 on eth0.IPv4.
    Jan  1 01:00:27 et9x00 daemon.info avahi-daemon[491]: Registering HINFO record with values 'MIPS'/'LINUX'.
    Jan  1 01:00:28 et9x00 daemon.info avahi-daemon[491]: Server startup complete. Host name is et9x00.local. Local service cookie is 3102072984.
    Jan  1 01:00:29 et9x00 daemon.info avahi-daemon[491]: Service "et9x00" (/services/ssh.service) successfully established.
    Jan  1 01:00:29 et9x00 daemon.info avahi-daemon[491]: Service "et9x00" (/services/sftp-ssh.service) successfully established.
    May 14 19:40:28 et9x00 daemon.notice ntpdate[397]: step time server 144.76.3.18 offset 1400089196.112116 sec
    May 14 19:40:58 et9x00 cron.err crond[454]: time disparity of 23334820 minutes detected
    Geändert von Thomas4711 (15.05.2014 um 19:54 Uhr) Grund: in CODE gesetzt

  6. #6
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Hast du bei den Zeiteinstellungen was geändert?



  7. #7
    Anfänger
    Registriert seit
    14.05.2014
    Beiträge
    10
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    nein die habe ich nicht angefasst. lt. Box ist es auch gerade noch 19,49 hier hat sie sich aufgehangen.
    Jetzt 20.06 hat mich die Box wieder ran gelassen. :-)
    Geändert von T--rex (15.05.2014 um 20:07 Uhr)

  8. #8
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Ich tippe mal aufs netzwerk, ist aber geraten.



  9. #9
    DEVIL
    Gast
    Die Zeit stimmt nicht May 14 ..... oder ist das LOG von gestern?
    Schalte von NTP auf Transponder Zeit
    Geändert von DEVIL (15.05.2014 um 20:20 Uhr)

  10. #10
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Ich geb mal direkt weiter was ein Dev dazu meint.

    fstab mount kann hängen wenn nas down is
    dann bootet box nicht durch
    netzmount in fstab is ned ideal - hatte ich auch schon




Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 21:54 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com