Ergebnis 41 bis 50 von 59
-
13.05.2014, 20:56 #41
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
ThemenstarterCode:+ (1) Background File Eraser+ (5) Tuxtxt + (8) graphics acceleration manager + (9) GFBDC 10800k video mem - double buffering available! 3600kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) + (9) gLCDDC couldn't open LCD - load lcd.ko! lcd buffer 0x785e40 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... PYTHONPATH: /usr/lib/enigma2/python [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "dreambox remote control (native)" is a remotecontrol Input device "dreambox advanced remote control (native)" is a remotecontrol Input device "front panel" is a remotecontrol Found 3 input devices. + (22) Hdmi CEC driver eHdmiCEC: detected physical address change: 1000 --> 3000 eHdmiCEC: send message 84 30 00 03 + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (36) Stream server + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) loaded 239 channels/transponders and 4152 services scanning for frontends.. opening frontend 0 close frontend 0 found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3 Use valid Linux Time :) (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png found 6 spinner! setIoPrio best-effort level 3 ok main thread is non-idle! display spinner! [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author! defaulting to standard display skin... skin_display.xml Reading satellites.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: diseqc_a_b_c_d sec config completed [NimManager] slot name=BCM7346 (internal) [NimManager] multiType = True [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl' [Time By]: Transponder [EPGC] time updated.. but cache file not set yet.. dont start epg!! [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...executing main OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) Unknown device type: front panel [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) Activating language Deutsch [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: letterbox [VideoMode] setting scaler_sharpness to: 0000000D [VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz [EPGC Load] Poller disabled. [EPGC Save] Poller disabled. [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat' [EPGC] time updated.. start EPG Mainloop [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat couldn't open /proc/stb/misc/12V_output Setting OSD position: 0 720 0 576 Setting OSD alpha: 255 Setting 3D mode: auto Setting 3D depth: 50 [EPGC Save] Poller disabled. [EPGC Load] Poller disabled. FIXME: request for unknown slot FIXME: request for unknown slot FIXME: request for unknown slot FIXME: request for unknown slot Module 'mechanize' loaded Twisted Agent in use (12, 0, 0) Module 'ast' loaded Module 'mechanize' loaded
Geändert von mrbozkurt (13.05.2014 um 21:01 Uhr)
-
Advertising
-
13.05.2014, 21:20 #42
- Registriert seit
- 05.04.2013
- Beiträge
- 481
- Thanks (gegeben)
- 1409
- Thanks (bekommen)
- 3257
- Total Downloaded
- 295,50 MB
- Total Downloaded
- 295,50 MB
Box 1:AX HD51Module 'mechanize' loadedDu kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]
-
13.05.2014, 21:28 #43
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
Themenstarterdas verstehe ich ja nicht, habe es für ein paar std am laufen gehabt dann fing es wider an so lange ich mediaportal schaue geht es wenn ich auf einen sender gehe macht der einen neustart
was bedeutet das
SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
-
13.05.2014, 21:32 #44
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
ThemenstarterCode:+ (1) Background File Eraser+ (5) Tuxtxt + (8) graphics acceleration manager + (9) GFBDC 10800k video mem - double buffering available! 3600kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) + (9) gLCDDC couldn't open LCD - load lcd.ko! lcd buffer 0x785e40 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... PYTHONPATH: /usr/lib/enigma2/python [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "dreambox remote control (native)" is a remotecontrol Input device "dreambox advanced remote control (native)" is a remotecontrol Input device "front panel" is a remotecontrol Found 3 input devices. + (22) Hdmi CEC driver eHdmiCEC: detected physical address change: 1000 --> 3000 eHdmiCEC: send message 84 30 00 03 + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (36) Stream server + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) loaded 239 channels/transponders and 4152 services scanning for frontends.. opening frontend 0 close frontend 0 found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3 Use valid Linux Time :) (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png found 6 spinner! setIoPrio best-effort level 3 ok main thread is non-idle! display spinner! [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author! defaulting to standard display skin... skin_display.xml Reading satellites.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: diseqc_a_b_c_d sec config completed [NimManager] slot name=BCM7346 (internal) [NimManager] multiType = True [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl' [Time By]: Transponder [EPGC] time updated.. but cache file not set yet.. dont start epg!!
-
13.05.2014, 21:39 #45
- Registriert seit
- 05.04.2013
- Beiträge
- 481
- Thanks (gegeben)
- 1409
- Thanks (bekommen)
- 3257
- Total Downloaded
- 295,50 MB
- Total Downloaded
- 295,50 MB
Box 1:AX HD51SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]
-
13.05.2014, 21:44 #46
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
Themenstarterich lade gerade das von heute mal drauf und lasse mall es wie es ist ohne was zu instalieren es kann ja nicht sein das bei einer neue box die ich vor 4 tagen gekauft habe sio was ist
-
13.05.2014, 23:05 #47
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
Themenstarterhabe jetzt mal eine zeit lang getestet, nur freetv keine hd sender gehen alle.
Gehe ich auf den sender eines HD egal ob freetv oder verschlüsselt der macht soffort den reboot.
woran kann sowas liegen
-
17.05.2014, 06:56 #48
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
Themenstarterich konnte es nicht lassen da ich es am montag erst zuruck schicken kann, habe ich mal das orginale img drauf gemacht 8 xtrend-2.et4x20120915085257_usb ).
nun was soll ich sagen nach 3 std immer noch am laufen nur kann ich hier ja keine erweiterungen instaliernen .
Und deswegen mal wider das neue von heute OpenATV img drauf keine 5 minuten zappen und wider ein reboot.
also es kann ja nicht seien das ich der einzige bin mit dem fehler ( was aber so ist weil kein anderer das problem hat.
-
17.05.2014, 06:57 #49
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
Themenstarterhabe mal das open atv 3.0 letzte drauf gemacht auch das gleiche
-
17.05.2014, 07:01 #50
- Registriert seit
- 28.06.2013
- Beiträge
- 107
- Thanks (gegeben)
- 7
- Thanks (bekommen)
- 2
- Total Downloaded
- 222,19 MB
- Total Downloaded
- 222,19 MB
Themenstarterhier ist der log
hoffe es findet diesmal einer was
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.05.17 06:56:44 =~=~=~=~=~=~=~=~=~=~=~=
Welcome to openATV for et4x00
openatv 3.0 et4x00
et4x00 login: rp oot
root@et4x00:~# xtrend-2.et4x20120915085257_usb init 2
root@et4x00:~# enigma2
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
couldn't open LCD - load lcd.ko!
lcd buffer 0x7eb778 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Input device "front panel" is a remotecontrol
Found 3 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 3000
eHdmiCEC: send message 84 30 00 03
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 112 channels/transponders and 1718 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3
Use valid Linux Time (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
found 6 spinner!
executing main
setIoPrio best-effort level 3 ok
[Harddisk] enumerating block devices...
[Harddisk] enumerating network mounts...
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[NimManager] slot name=BCM7346 (internal)
[NimManager] multiType = True
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
[Time By]: Transponder
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
Unknown device type: front panel
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language Deutsch
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] /etc/enigma2/epg.dat not found, try /epg.dat
couldn't open /proc/stb/misc/12V_output
Setting OSD position: 0 720 0 576
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
[Ipkg] Added to OPKG destinations: /
[Info-Panel] machinebrand: Xtrend
[Info-Panel] machinename: ET4000
[Info-Panel] oem name: xtrend
[Info-Panel] boxtype: et4000
Plugin Extensions/WebInterface failed to load: No module named plugin
[AutoTimer] Auto Poll Enabled
starting hotplug handler
[NAVIGATION] wasTimerWakeup = False
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
EMC: +++ EMC V3.7.4beta20131015 startup
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Sa 17 Mai 2014 06:58:27 CEST
warning, skin is missing element key_yellow in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_blue in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_green in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_red in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
[Skin] Attribute not implemented: valign value: bottom
[SCREENNAME] RdsInfoDisplaySummary
warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'>
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
warning, skin is missing element key_blue in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_red in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_green in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_yellow in <class 'Screens.InfoBar.InfoBar'>
[SCREENNAME] RdsInfoDisplay
[SCREENNAME] InfoBarSummary
[SCREENNAME] InfoBar
setValue 50
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
lastshutdown=False (True = last shutdown was OK)
NOK shutdown action=normal
bootup action=normal
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
[LogManager] probing folders
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
[CAMSTARTER] No Cam to Start, Exit
EMC: Setting EPG language: de_DE
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
EMC: Next trashcan cleanup in 1082 minutes
child has terminated
pipes closed
0.0.0.0
192.168
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
EMC: [EMCMS] trashcan cleanup: no trashcan...
1 6 1
KEY: 6 5
warning, skin is missing element servicename in <class 'Screens.InfoBarGenerics.NumberZap'>
[SCREENNAME] ['NumberZap_summary', 'SimpleSummary']
[SCREENNAME] NumberZap
0 6 1
KEY: 6 5
1 160 1
KEY: 352 OK
action -> SetupActions ok
[SCREENNAME] InfoBarSummary
playing 1:0:1:2EE3:441:1:C00000:0:0:0:
[SCREENNAME] InfoBar
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
RemovePopup, id = ZapError
allocate channel.. 0441:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12187500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1587 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:2EE3:441:1:C00000:0:0:0:
allocate demux
0 160 1
KEY: 352 OK
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3(?)
[SEC] sleep 100ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x239a7b8 running
[eEPGCache] channel 0x239a7b8 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00a3), and 1 audio stream(s) (0068), and the pcr pid is 00a3, and the text pid is 0069
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=163, apid=104
DMX_SET_PES_FILTER(0xa3) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x68) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa3) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x69) - ttx - ok
DEMUX_START - ttx - ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 69
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
TuxTxt running thread...(069)
disable teletext subtitles
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[eDVBCAService] new service 1:0:1:2EE3:441:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2EE3:441:1:C00000:0:0:0:
RemovePopup, id = ZapError
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[SEC] set dynamic current limiting
PATready
use pmtpid 002c for service_id 2ee3
sdt update done!
eventNewProgramInfo 0 0
have 1 video stream(s) (00a3), and 2 audio stream(s) (0068, 006a), and the pcr pid is 00a3, and the text pid is 0069
decoder state: play, vpid=163, apid=104
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[eDVBCIInterfaces] gotPMT
[Dish] tuning failed
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
[SCREENNAME] Volume
setValue 45
AITready
0 72 1
KEY: 114
not enough diskspace for timeshift! (less than 1GB)
[EPGC] start caching events(1400302734)
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
[SCREENNAME] Volume
setValue 40
0 72 1
KEY: 114
not enough diskspace for timeshift! (less than 1GB)
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
[SCREENNAME] Volume
setValue 35
0 72 1
KEY: 114
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
[SCREENNAME] Volume
setValue 30
0 72 1
KEY: 114
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
[SCREENNAME] Volume
setValue 25
0 72 1
KEY: 114
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
[SCREENNAME] Volume
setValue 20
0 72 1
KEY: 114
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
[SCREENNAME] Volume
setValue 15
0 72 1
KEY: 114
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 10 10 (raw)
Setvolume: 57 57 (-1db)
[SCREENNAME] Volume
setValue 10
0 72 1
KEY: 114
1 72 1
KEY: 114
action -> GlobalActions volumeDown
Setvolume: 5 5 (raw)
Setvolume: 60 60 (-1db)
[SCREENNAME] Volume
setValue 5
0 72 1
KEY: 114
1 8b 1
KEY: 139 MENU
action -> InfobarMenuActions mainMenu
[SCREENNAME]
Lesezeichen