Ergebnis 1 bis 1 von 1
-
23.04.2015, 09:23 #1
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +VU+ Zero Image Flash mit USB Stick (english Version included)
Anleitung zum Neuflash / Aktualisieren oder Backup einspielen des Image einer Vu+ Zero / Vu+ Zero WE mittels USB-Stick
(see english Version below)
Wichtig: Bitte das Image-Archiv auf dem USB-Stick entpacken, dann werden auch die Verzeichnisse richtig erstellt.
- Bei Neuflash: Image am PC herunterladen und abspeichern (USB Variante)
- USB Stick mit dem Dateisystem FAT, bzw. FAT32 formatieren
- Datei auf dem USB-Stick entpacken (z.B. mit WinRAR, WinZIP, 7ZIP, usw)
- Die Verzeichnisse /vuplus/zero sind auf dem Stick erstellt worden.
- 5 Dateien befinden sich in diesem Verzeichnis /vuplus/zero auf dem Stick!
- Bei Backup einspielen (Schritt 1 bis 5 entfällt): Zuvor erstelltes Backup auf den USB Stick kopieren.
- Vu+ STB ausschalten (in den Deepstandby oder Netzschalter)
- Alle USB Geräte von der Box entfernen
- USB Stick anstecken
- Vu+ STB einschalten
- Die weiße LED pulsiert während des Flashvorgangs
- Warten bis die weiße LED in der Frontblende blinkt
- Vu+ STB ausschalten
- USB Stick entfernen
- STB einschalten
Falls der Flash der BOX nicht funktioniert, könnte das auch am USB Stick oder an der Ordnerstruktur liegen. Je kleiner der USB Stick (2 GB) desto besser, in FAT32 formatieren.
English Version:
How to Flash / to Update or Flash a Backup Image to a Vu+ Zero / Vu+ Zero WE with a USB-Stick
Important: Please unzip the image-archive directly to the USB-Stick, the reason is that the directories are created correctly.
- If you do a new Flash: Download the Image to your local PC hard-drive (USB Version)
- Format the USB Stick with the filesystem FAT or better with FAT32
- Unzip the file directly to the USB-Stick (use: WinRAR, WinZIP, 7ZIP, etc.)
- The Folders /vuplus/zero have been added to the USB-Stick.
- 5 files are in the folder /vuplus/zero
- If you do a Backup Flash (Step 1 to 5 is unnecessary): Copy the previously created backup to the USB-Stick.
- Power off the Vu+ STB (Deepstandby or Powerswitch)
- Remove all USB Devices from the Box.
- Plug-in the USB-Stick.
- Power on the Vu+ STB.
- The white LED pulsates during the Flash process.
- Wait until the white LED starts blinking.
- Power off the Vu+ STB.
- Remove the USB-Stick.
- Power on the Vu+ STB.
If the flash of the BOX doesn't work, this could also be the reason of the size of the USB-Stick or the folder structure. The smaller the USB stick (2 GB) the better, in FAT32 formated.
Geändert von laptan (13.07.2017 um 10:18 Uhr)
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
Danke - 40 Thanks
-
Advertising
Lesezeichen