Ergebnis 1 bis 10 von 12
-
02.08.2020, 08:54 #1
- Registriert seit
- 26.03.2016
- Ort
- Sachsen Anhalt
- Beiträge
- 65
- Thanks (gegeben)
- 26
- Thanks (bekommen)
- 3
- Total Downloaded
- 27,90 MB
- Total Downloaded
- 27,90 MB
Box 1:vu duo2Box 2:Dream OneBox 3:vu ultimo 4kBox 4:vu+solo4kVu+ turbo se an VU Solo4k mit oATV6.4
Vielleicht kann mir jemand weiter helfen. Meine Tochter ist nach Leipzig gezogen und möchte ihre Solo4k weiter nutzen. Jetzt hat sie sich den Kabel usb Stick geholt ( vu+ turbo se) leider wird er nicht erkannt. Kann mir jemand sagen oder einen link geben welchen Treiber ich nach installieren muss.
Es ist ein aktuelles open atv 6.4 oben.
Danke im vorraus
Gruß
-
Advertising
-
02.08.2020, 09:32 #2
-
02.08.2020, 09:47 #3
- Registriert seit
- 26.03.2016
- Ort
- Sachsen Anhalt
- Beiträge
- 65
- Thanks (gegeben)
- 26
- Thanks (bekommen)
- 3
- Total Downloaded
- 27,90 MB
- Total Downloaded
- 27,90 MB
ThemenstarterBox 1:vu duo2Box 2:Dream OneBox 3:vu ultimo 4kBox 4:vu+solo4kIch hab den orinal usb stick von vu +
VU+ Turbo SE Combo DVB-C/T2 Hybrid USB TUNER | VU+ | HDTV-Receiver (Sat) | Digitale Sat-Receiver, Anlagen und Zubehor - hm-sat-shop.de
-
02.08.2020, 10:18 #4
- Registriert seit
- 20.04.2013
- Beiträge
- 24.948
- Thanks (gegeben)
- 4700
- Thanks (bekommen)
- 9133
- Total Downloaded
- 596,61 MB
- Total Downloaded
- 596,61 MB
Box 1:GB Q4K-SC / UE4K-SC / UE4K-CBox 2:GigaBlue Q-SSC / Q+-SSCBox 3:DM900uhd-SS / Vu+DuoBox 4:ZGemma H7/H9 SF8008Box 5:diverse andere . . .Ich finde in der GB UE 4K diese DVB-USB Driver:
Code:... opkg list |grep enigma2-plugin-drivers-dvb-usb- ... enigma2-plugin-drivers-dvb-usb-a867 - 1.0-r0 - USB DVB driver for Afatech 867 chipset enigma2-plugin-drivers-dvb-usb-af9015 - 1.0-r0 - USB DVB driver for Afatech 9015 chipset enigma2-plugin-drivers-dvb-usb-af9035 - 1.0-r0 - USB DVB driver for Afatech 9035 chipset enigma2-plugin-drivers-dvb-usb-as102 - 1.0-r0 - USB DVB driver for AS102 chipset enigma2-plugin-drivers-dvb-usb-dib0700 - 1.0-r1 - USB DVB driver for dib0700 chipset enigma2-plugin-drivers-dvb-usb-dtt200u - 1.0-r0 - USB DVB driver for dtt200u chipsets enigma2-plugin-drivers-dvb-usb-dvbsky-classic - 2.0-r0 - USB DVB driver for DVB-SKY Family enigma2-plugin-drivers-dvb-usb-dw2102 - 1.0-r0 - USB DVB driver for DW210x/DW310x chipset enigma2-plugin-drivers-dvb-usb-em28xx - 1.0-r0 - USB DVB driver for EM28xx chipset enigma2-plugin-drivers-dvb-usb-it913x - 1.0-r0 - USB DVB driver for it913x chipsets enigma2-plugin-drivers-dvb-usb-mn8847x - 1.0-r0 - USB DVB driver for Panasonic mn88472/3 chipsets enigma2-plugin-drivers-dvb-usb-opticombo - 2.0-r0 - OPTI-Combo DVB-T2/C USB Stick enigma2-plugin-drivers-dvb-usb-pctv452e - 1.0-r0 - USB DVB driver for pctv452e chipsets enigma2-plugin-drivers-dvb-usb-rtl2832 - 1.0-r0 - USB DVB driver for Realtek RTL2832 chipset enigma2-plugin-drivers-dvb-usb-siano - 1.0-r0 - USB DVB driver for Siano chipset enigma2-plugin-drivers-dvb-usb-tbs - 1.1-r0 - enigma2-plugin-drivers-dvb-usb-tbs version 1.1-r0 enigma2-plugin-drivers-dvb-usb-tbs5520 - 1.0-r0 - enigma2-plugin-drivers-dvb-usb-tbs5520 version 1.0-r0
Da würde ich den OPTI-Combo probieren.
Aber nur aus dem Bauch, da ich weder den Stick, noch eine passende VU habe.Grüßle
Ralf
---------------------------------------------
Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
Astra 19.2E UniCable & KabelBW, oATV/teamBlue
(u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----
-
02.08.2020, 17:45 #5
- Registriert seit
- 26.03.2016
- Ort
- Sachsen Anhalt
- Beiträge
- 65
- Thanks (gegeben)
- 26
- Thanks (bekommen)
- 3
- Total Downloaded
- 27,90 MB
- Total Downloaded
- 27,90 MB
ThemenstarterBox 1:vu duo2Box 2:Dream OneBox 3:vu ultimo 4kBox 4:vu+solo4kLeider habe ich da mit kein Erfolg gehabt, ist nur schade das nicht einmal eine Beschreibung bei lag was man noch benötigt bzw. anwendet.
Werde mal dann eine Anfrage bei Hm sat machen , ansonsten geht das Teil zurück.
Gruß
-
02.08.2020, 18:01 #6
- Registriert seit
- 06.04.2013
- Beiträge
- 509
- Thanks (gegeben)
- 68
- Thanks (bekommen)
- 39
- Total Downloaded
- 114,59 MB
- Total Downloaded
- 114,59 MB
Box 1:VU UNOVersuche DVB-SKY sollte gleich sein nur weiss .........
-
02.08.2020, 18:58 #7
- Registriert seit
- 26.03.2016
- Ort
- Sachsen Anhalt
- Beiträge
- 65
- Thanks (gegeben)
- 26
- Thanks (bekommen)
- 3
- Total Downloaded
- 27,90 MB
- Total Downloaded
- 27,90 MB
ThemenstarterBox 1:vu duo2Box 2:Dream OneBox 3:vu ultimo 4kBox 4:vu+solo4kHabe es nun am laufen bekommen , Stick wird erkannt. Der Fehler lag bei mir ,hätte ein kompletten Neustart machen sollen und nicht nur gui.
Nun muss ich das nächste Wochenende nur noch ein ein Suchlauf machen und dann sollte alles funktionieren.
Danke noch mal für die Hilfe.
Gruß
-
Danke - 1 ThanksOld bedankten sich
-
07.04.2021, 14:21 #8
- Registriert seit
- 27.01.2014
- Beiträge
- 93
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 18
- Total Downloaded
- 1,31 MB
- Total Downloaded
- 1,31 MB
I also have a problem with Solo4K + Turbo tuner in openatv6.4. I will install drivre without any problems, but as soon as I reboot and I'm stuck there in the usb Turbo tuner, it just doesn't start Solo4K at all. I disconnect the Turbo and Solo4K starts without any problems. in openatv 6.3 I have no problem with Turbo tuner. I tried to install Openatv6.4 several times, but it never started again. is there a problem with openatv-6.4 and Turbo tuner? well thank you....
-
06.11.2021, 13:10 #9
- Registriert seit
- 06.05.2014
- Ort
- NRW
- Beiträge
- 211
- Thanks (gegeben)
- 153
- Thanks (bekommen)
- 80
- Total Downloaded
- 282,05 MB
- Total Downloaded
- 282,05 MB
Box 1:AX HD 60 OPENATV 7.3Box 2:AX HD 60 OPENATV 7.3Box 3:VU+ Solo SE OPENATV 7.0Box 4:Opticum AXOdin OPENATV 7.0Hallo ,
ich habe einen VU+ Turbo SE Combo USB Stick, er wird unter openatv 7.0 neueste Version erkannt ( 6.4 und 6.5 habe ich auch probiert wird erkannt ,aber ohne Erfolg beim Suchlauf) und ich kann auch einen Sendersuchlauf machen. Ich habe folgende Treiber probiert.
dvd-usb-opticombo und dvd-usb-dvbsky-classic. beide installieren den Stick und bei beiden ist Suchlauf möglich, aber ohne Erfolg.
Irgendwas fehlt noch habe ich das Gefühl, kann mir jemand helfen.
Danke
Sid
-
06.11.2021, 13:16 #10
- Registriert seit
- 06.05.2014
- Ort
- NRW
- Beiträge
- 211
- Thanks (gegeben)
- 153
- Thanks (bekommen)
- 80
- Total Downloaded
- 282,05 MB
- Total Downloaded
- 282,05 MB
Box 1:AX HD 60 OPENATV 7.3Box 2:AX HD 60 OPENATV 7.3Box 3:VU+ Solo SE OPENATV 7.0Box 4:Opticum AXOdin OPENATV 7.0Code:ax60-1 login: root Password: root@ax60-1:~# cd /lib/firmware root@ax60-1:/lib/firmware# ls -la drwxr-xr-x 4 root root 4096 Nov 6 14:06 . drwxr-xr-x 8 root root 4096 Nov 2 13:20 .. -rw-r--r-- 1 root root 13576 Sep 30 08:13 carl9170-1.fw -rw-r--r-- 1 root root 2728 Sep 30 07:59 dvb-demod-si2168-02.fw -rw-r--r-- 1 root root 28656 Sep 30 07:59 dvb-demod-si2168-a20-01.fw -rw-r--r-- 1 root root 18888 Sep 30 07:59 dvb-demod-si2168-a30-01.fw -rw-r--r-- 1 root root 15827 Sep 30 07:59 dvb-demod-si2168-b40-01.fw -rw-r--r-- 1 root root 204 Sep 30 07:59 dvb-demod-si2168-d60-01.fw -rw-r--r-- 1 root root 8192 Sep 30 08:04 dvb-fe-ds3000.fw -rwxr-xr-x 1 root root 8192 Sep 30 08:01 dvb-fe-ds300x.fw -rwxr-xr-x 1 root root 8192 Sep 30 08:01 dvb-fe-ds3103.fw -rw-r--r-- 1 root root 1666 Sep 30 07:59 dvb-tuner-si2141-a10-01.fw -rw-r--r-- 1 root root 5015 Sep 30 07:59 dvb-tuner-si2158-a20-01.fw -rw-r--r-- 1 root root 8192 Sep 30 08:09 dvb-usb-s660.fw -rw-r--r-- 1 root root 72992 Sep 30 08:14 htc_7010.fw -rw-r--r-- 1 root root 51272 Sep 30 08:14 htc_9271.fw -rw-r--r-- 1 root root 8192 Sep 30 08:04 rt2870.bin -rw-r--r-- 1 root root 2048 Sep 30 08:13 rt73.bin drwxr-xr-x 2 root root 4096 Nov 2 13:18 rtlwifi drwxr-xr-x 2 root root 4096 Nov 2 13:18 zd1211 root@ax60-1:/lib/firmware# lsusb Bus 001 Device 002: ID 14cd:6600 Bus 002 Device 002: ID 04a3:0101 Bus 003 Device 002: ID 05e3:0610 Bus 004 Device 002: ID 05e3:0626 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0002 Bus 004 Device 001: ID 1d6b:0003 Bus 003 Device 003: ID 04e8:2036 Bus 003 Device 004: ID 0572:0320 Bus 004 Device 003: ID 174c:55aa root@ax60-1:/lib/firmware# dmesg Booting Linux on physical CPU 0x0 Linux version 4.4.35 (oe-user@oe-host) (gcc version 11.2.0 (GCC) ) #1 SMP Sun Sep 19 01:3 2:49 UTC 2021 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache initmrd: found no initmrd. Machine model: Hisilicon cma: Reserved 48 MiB at 0x36400000 cma: Reserved 4 MiB at 0x3a400000 Memory policy: Data cache writealloc -------------Fixed IO Mapping---------- Virt, Phys, Size 0xF9000000, 0xF8000000, 0x02000000 -------------------------------------- On node 0 totalpages: 239872 free_area_init_node: node 0, pgdat c0bb2180, node_mem_map dfca1000 Normal zone: 1032 pages used for memmap Normal zone: 0 pages reserved Normal zone: 132096 pages, LIFO batch:31 HighMem zone: 107776 pages, LIFO batch:31 PERCPU: Embedded 13 pages/cpu @dfc5d000 s22604 r8192 d22452 u53248 pcpu-alloc: s22604 r8192 d22452 u53248 alloc=13*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 238840 Kernel command line: root=/dev/mmcblk0p23 rootsubdir=linuxrootfs1 rootfstype=ext4 kernel= /dev/mmcblk0p19 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M( recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay) ,20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(dvb),256M(cache),5 0M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(lin uxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,48M vmalloc=500M log_buf_len individual max cpu contribution: 4096 bytes log_buf_len total cpu_extra contributions: 12288 bytes log_buf_len min size: 16384 bytes log_buf_len: 32768 bytes early log buf free: 14180(86%) PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 875172K/959488K available (7938K kernel code, 688K rwdata, 2224K rodata, 556K ini t, 522K bss, 31068K reserved, 53248K cma-reserved, 367596K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0400000 ( 516 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc07c8b5c (7939 kB) .init : 0xc0a8f000 - 0xc0b1a000 ( 556 kB) .data : 0xc0b1a000 - 0xc0bc63ec ( 689 kB) .bss : 0xc0bc8000 - 0xc0c4a910 ( 523 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:352 clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 n s sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Console: colour dummy device 80x30 Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok ftrace: allocating 26372 entries in 78 pages CPU0: update cpu_capacity 1024 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x8280 - 0x82d8 CPU: hi3798mv200 CPU1: powerup CPU1: update cpu_capacity 1024 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: powerup CPU2: update cpu_capacity 1024 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: powerup CPU3: update cpu_capacity 1024 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Brought up 4 CPUs SMP: Total of 4 processors activated (12681.21 BogoMIPS). CPU: All CPU(s) started in SVC mode. CPU3: update max cpu_capacity 1024 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 000 ns PCIe read alloc area phyaddr 08 size 00000000 PCIe write alloc area phyaddr 08 size 00000000 NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations CPU3: update max cpu_capacity 1024 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. Serial: AMBA PL011 UART driver f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2 console [ttyAMA0] enabled f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2 f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2 pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered hisilicon-pcie: probe of f0001000.pcie failed with error -1 hisi_iommu_ptable_addr:phy 0x1e800000 size:0x400000 hisi_iommu_err_rdaddr :phy 0x1f6df600 size:0x200 hisi_iommu_err_wraddr :phy 0x1f6df800 size:0x200 in hisi_iommu_domain_init start in hisi_iommu_domain_init end vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022 ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000 spi_master spi0: will run message pump with realtime priority usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource hisp804 FS-Cache: Loaded NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 NetWinder Floating Point Emulator V0.97 (double precision) hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available futex hash table entries: 1024 (order: 4, 65536 bytes) VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). FS-Cache: Netfs 'cifs' registered for caching jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) yaffs: yaffs built Installing. bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered hiahci-phy: registered new sata phy driver brd: module loaded loop: module loaded ahci: probe of f9900000.hiahci failed with error -1 hifmc100: registerd new interface driver hifmc100. hifmc100: Found flash memory controller hifmc100. hifmc100: no found spi-nor device. hifmc100: no found nand device. hifmc100: no found spi-nand device. FEPHY:addr=2, la_am=0xe, ldo_am=0x3, r_tuning=0x13 libphy: himii: probed hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa v330 /soc/ethernet@f9840000/ethernet_phy@0 has invalid PHY address=255 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform f9890000.ehci: EHCI Host Controller ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1 ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000 ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform f9880000.ohci: Generic Platform OHCI controller ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2 ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xhci-hcd f98a0000.xhci: xHCI Host Controller xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3 xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00030010 xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected xhci-hcd f98a0000.xhci: xHCI Host Controller xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4 usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver xpad i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized sp805-wdt f8a2c000.watchdog: registration successful registered new interface driver himciV2.0_4.4.35_20170401 usb 1-1: new high-speed USB device number 2 using ehci-platform usb 3-1: new high-speed USB device number 2 using xhci-hcd usb-storage 1-1:1.0: USB Mass Storage device detected usb-storage 1-1:1.0: Quirks match for vid 14cd pid 6600: 20 usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd scsi host0: usb-storage 1-1:1.0 mmc0: MAN_BKOPS_EN bit is not set scan edges:2 p2f:7 f2p:1 mix set temp-phase 4 hub 4-1:1.0: USB hub found hub 4-1:1.0: 4 ports detected scan elemnts: startp:16 endp:2 Tuning SampleClock. mix set phase:[04/07] ele:[09/18] mmc0: new HS400 MMC card at address 0001 mmcblk0: mmc0:0001 8GTF4R 7.28 GiB mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(bootoptions) p5(deviceinfo) p6(basepa ram) p7(pqparam) p8(logo) p9(fastplay) p10(kernel) p11(trustedcore) p12(misc) p13(system) p14(vendor) p15(dvb) p16(cache) p17(private) p18(securestore) p19(linuxkernel1) p20(linu xkernel2) p21(linuxkernel3) p22(linuxkernel4) p23(userdata) hub 3-1:1.0: USB hub found hub 3-1:1.0: 4 ports detected f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected! usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd usb 4-1.1: USB controller f98a0000.xhci does not support streams, which are required by t he UAS driver. usb 4-1.1: Please try an other USB controller if you wish to use UAS. usb 4-1.1: USB controller f98a0000.xhci does not support streams, which are required by t he UAS driver. usb 4-1.1: Please try an other USB controller if you wish to use UAS. usb-storage 4-1.1:1.0: USB Mass Storage device detected usb-storage 4-1.1:1.0: Quirks match for vid 174c pid 55aa: 400000 scsi host1: usb-storage 4-1.1:1.0 usb 2-2: new full-speed USB device number 2 using ohci-platform usb 3-1.3: new full-speed USB device number 3 using xhci-hcd f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected! usb 3-1.3: not running at top speed; connect to a high speed hub usb 3-1.3: ep 0x83 - rounding interval to 512 microframes, ep desc says 768 microframes usbcore: registered new interface driver usbhid usbhid: USB HID core driver ashmem: initialized usbcore: registered new interface driver snd-usb-audio oprofile: using timer interrupt. Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 10 NET: Registered protocol family 17 Key type dns_resolver registered Registering SWP/SWPB emulation handler ALSA device list: No soundcards found. Warning: unable to open an initial console. Freeing unused kernel memory: 556K (c0a8f000 - c0b1a000) This architecture does not have kernel memory protection. EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null) usb 3-1.4: new high-speed USB device number 4 using xhci-hcd FAT-fs (mmcblk0p4): Volume was not properly unmounted. Some data may be corrupt. Please r un fsck. scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PW03 PQ: 0 ANSI: 0 sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 random: nonblocking pool is initialized scsi 1:0:0:0: Direct-Access HGST HTS 541010A9E680 0 PQ: 0 ANSI: 6 sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) sd 1:0:0:0: [sda] 4096-byte physical blocks sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usbcore: registered new interface driver tpm sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok input: front panel as /devices/virtual/input/input0 input: dreambox advanced remote control (native) as /devices/virtual/input/input1 input: rc mouse emulation as /devices/virtual/input/input2 DVB: registering new adapter (dvb0) platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)... Mali: Mali device driver loaded tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints ker nel. Disabling lock debugging due to kernel taint Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE]. Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm Running on kernel 4.4.35 #1 SMP Sun Sep 19 01:32:49 UTC 2021 armv7l WARNING: Running kernel does not match configured kernel headers the driver was built wit h! The driver needs to be rebuilt with the correct kernel headers! SGI XFS with ACLs, security attributes, realtime, no debug enabled model=hd60 displaymodel=HD60 brand=gfutures displaybrand=AX 4KBOX platform=N/A imgversion=7.0 imgrevision=20211102 imglanguage=N/A developername=openatv feedsurl=http://feeds2.mynonpublic.com/7.0/hd60 distro=openatv oe=OE-Alliance 5.0 kernel=4.4.35 python=3.9 mediaservice=N/A multilib=False architecture=cortexa15hf-neon-vfpv4 socfamily=hisi3798mv200 blindscanbinary=N/A rctype=16 rcname=ax51 rcidnum=2 smallflash=False middleflash=False imagedir=hd60 imagefs= hdfastboot8gb mtdbootfs=mmcblk0p4 mtdrootfs=mmcblk0p20 mtdkernel=mmcblk0p19 rootfile=rootfs.tar.bz2 kernelfile=uImage mkubifs= ubinize= forcemode=N/A compiledate=20211102 fpu=hard displaytype=7segment transcoding=False multitranscoding=True hdmi=True yuv=False rca=False avjack=True scart=False dvi=False svideo=False hdmihdin=False hdmifhdin=False wol=False wwol=False ci=False vfdsymbol=False fhdskin=True dboxlcd=N/A imageversion=7.0 imagebuild=20211102 imagedevbuild=001 imagetype=release EXT4-fs (mmcblk0p23): re-mounted. Opts: data=ordered usb 3-1.4: dvb_usb_v2: found a 'DVBSky T330' in warm state usb 3-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demu xer DVB: registering new adapter (DVBSky T330) usb 3-1.4: dvb_usb_v2: MAC address: 00:cc:10:a5:33:0c i2c i2c-3: Added multiplexed i2c bus 4 si2168 3-0064: Silicon Labs Si2168 successfully attached si2157 4-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached usb 3-1.4: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... Registered IR keymap rc-dvbsky input: DVBSky T330 as /devices/platform/soc/f98a0000.xhci/usb3/3-1/3-1.4/rc/rc0/input3 rc0: DVBSky T330 as /devices/platform/soc/f98a0000.xhci/usb3/3-1/3-1.4/rc/rc0 usb 3-1.4: dvb_usb_v2: schedule remote query interval to 300 msecs usb 3-1.4: dvb_usb_v2: 'DVBSky T330' successfully initialized and connected usbcore: registered new interface driver dvb_usb_dvbsky IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready si2168 3-0064: found a 'Silicon Labs Si2168-B40' si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 3-0064: firmware version: 4.0.25 si2157 4-0060: found a 'Silicon Labs Si2157-A30' si2157 4-0060: firmware version: 3.0.5 platform dvb0.0: DVB: registering adapter 0 frontend 1 (vtuner)... root@ax60-1:/lib/firmware#
Lesezeichen