Thanks Thanks:  0
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 18
  1. #1
    Mitglied
    Registriert seit
    16.08.2014
    Beiträge
    66
    Total Downloaded
    55,62 MB
    Total Downloaded
    55,62 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue Quad Plus
     
     
    Box 2:
    VU+ Ultimo 4k
     
     

    Mount, Programmwechsel Problem

    Hallo!

    1. Wenn ich das Programm wechsle kommt der Spinner und bleibt da, besonders wenn man auf einen Sender des SAT1 Pakets schaltet. Kommt immer wieder nach ein paar mal umschalten. es hilft dann nur noch trennen vom Netzt.
    2. Wenn die interne Festplatte und den USB Stick mounten will dann crasht er (war schon immer so). Wenn ich unmount drücke, sagt er das das Laufwerk verwendet wird (beide). Hab mal neu geflasht ohne Einstellungen zu übernehmen aber beim mounten crasht es immer wieder.
    Angehängte Dateien Angehängte Dateien

    •   Alt Advertising

       

  2. #2
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.420
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    wegen spinner sat eins kann ich so direkt nichts erkennen

    wenn der spinner kommt bitte einmal per telnet auf die box

    dmsg eingeben ob das ein crash war

    wegen hdd muss ich schauen muss erstmal bei mir eine hdd einbauen und das nachstellen


    openATV we are open Source

    Boykott GPL violator

  3. #3
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    10.871
    Total Downloaded
    592,97 MB
    Total Downloaded
    592,97 MB
    ReceiverDankeAktivitäten
    Box 1:
    GigaBlue Q-SSC / Q+-SSC / weitere
     
     
    Box 2:
    DM900uhd-SS / Vu+Duo
     
     
    Box 3:
    Sogno 800HD Revo Triple 8800HD-SS
     
     
    Box 4:
    E4HD FormF3 AX Triplex VIP2-CC
     
     
    Box 5:
    diverse andere . . .
     
     
    Lasse mal mden Stick weg, und mounte zuerst die Platte. Zuvor vielleicht die /etc/fstab (WinSCP) kontrollieren, ob da noch Müll von vorhergehenden Mountversuchen drin ist.
    Grüßle
    Ralf
    ------------------------------------------------------------------------------------------------------------------------
    Gigablue Quad 4K-multi,Quad+-SSC,Quad-SSC, andere Gigas, Astra 19.2E, UniCable & KabelBW, oATV/ OpenMips
    (weitere: DM900uhd,Vu+Duo,Technisat,Edision),PC-DVB-S/C/T,PCH-A110,Xtreamer,BDP5200
    UE32C5700,UE65HU7590,LG42R51
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  4. #4
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.420
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    bitte testen hab gesehen mount manager zeigt noch die internen mmc flash blöcke an das sollte nicht sein ich hab die nun auf der blacklist


    kopiere mal das file nach: /usr/lib/enigma2/python/Plugins/Extensions/Infopanel

    und teste noch mal ob es an den mmc lag
    Angehängte Dateien Angehängte Dateien


    openATV we are open Source

    Boykott GPL violator

  5. #5
    Mitglied
    Registriert seit
    16.08.2014
    Beiträge
    66
    Themenstarter
    Total Downloaded
    55,62 MB
    Total Downloaded
    55,62 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue Quad Plus
     
     
    Box 2:
    VU+ Ultimo 4k
     
     
    Hab das File "MountManager" dort hin kopiert und jetzt crasht nix mehr beim mounten, auch die internen flash Blöcke sind nicht mehr zu sehen.

    Der Receiver hängt jetzt wieder beim umschalten. Der Spinner dreht und die Statusleiste ist eingeblendet. Die Uhrzeit oben rechts steht seit 10 Minuten Bild läuft weiter. Ich hab bei putty dmsg eingegeben, dann kommt -sh: dmsg: command not found

  6. #6
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    10.871
    Total Downloaded
    592,97 MB
    Total Downloaded
    592,97 MB
    ReceiverDankeAktivitäten
    Box 1:
    GigaBlue Q-SSC / Q+-SSC / weitere
     
     
    Box 2:
    DM900uhd-SS / Vu+Duo
     
     
    Box 3:
    Sogno 800HD Revo Triple 8800HD-SS
     
     
    Box 4:
    E4HD FormF3 AX Triplex VIP2-CC
     
     
    Box 5:
    diverse andere . . .
     
     
    Der Befehl heißt dmesg.
    Du kannst aber auch das Debuglog per Menü einschalten
    http://www.opena.tv/howtos/52-log-fi...html#post33949
    und hier anhängen.
    Grüßle
    Ralf
    ------------------------------------------------------------------------------------------------------------------------
    Gigablue Quad 4K-multi,Quad+-SSC,Quad-SSC, andere Gigas, Astra 19.2E, UniCable & KabelBW, oATV/ OpenMips
    (weitere: DM900uhd,Vu+Duo,Technisat,Edision),PC-DVB-S/C/T,PCH-A110,Xtreamer,BDP5200
    UE32C5700,UE65HU7590,LG42R51
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  7. #7
    Mitglied
    Registriert seit
    16.08.2014
    Beiträge
    66
    Themenstarter
    Total Downloaded
    55,62 MB
    Total Downloaded
    55,62 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue Quad Plus
     
     
    Box 2:
    VU+ Ultimo 4k
     
     
    Code:
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Linux version 3.14.28-1.8 (oe1@BUILD1) (gcc version 4.9.2 (GCC) )                                                                                                                                                              #1 SMP Tue Nov 10 01:18:29 CET 2015
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97366SFF_bad_MoCA
    [    0.000000] moving dtb from 0x000000000761c000 to 0x00000000008aad74
    [    0.000000] cma: Reserved 504 MiB at 0x0000000010000000
    [    0.000000] cma: Reserved 260 MiB at 0x000000002f800000
    [    0.000000] cma: Reserved 1024 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000] free_area_init_node: node 0, pgdat c086b080, node_mem_map cd6f600                                                                                                                                                             0
    [    0.000000]   Normal zone: 1520 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 194560 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 4624 pages used for memmap
    [    0.000000]   HighMem zone: 329728 pages, LIFO batch:31
    [    0.000000] MCP: Write pairing already disabled
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cd6c3000 s8768 r8192 d15808 u32768
    [    0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                                                                                                                                             es: 522768
    [    0.000000] Kernel command ****: root=/dev/mmcblk0p4 rootwait rw rootflags=da                                                                                                                                                             ta=journal debug coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800                                                                                                                                                             000 brcm_cma=1024M@0x80000000
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 218420K/2097152K available (6127K kernel code, 361K rwdat                                                                                                                                                             a, 1912K rodata, 248K init, 185K bss, 31436K reserved, 1847296K cma-reserved, 0K                                                                                                                                                              highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc07e21dc   (8041 kB)
    [    0.000000]       .init : 0xc07e3000 - 0xc0821240   ( 249 kB)
    [    0.000000]       .data : 0xc0822000 - 0xc087c740   ( 362 kB)
    [    0.000000]        .bss : 0xc087c748 - 0xc08aad74   ( 186 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq:                                                                                                                                                              95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc441000, parent irq:                                                                                                                                                              74)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq:                                                                                                                                                              97)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq:                                                                                                                                                              57)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 25451                                                                                                                                                             65795328ns
    [    0.000010] Switching to timer-based delay loop
    [    0.000249] Calibrating delay loop (skipped), value calculated using timer fr                                                                                                                                                             equency.. 54.00 BogoMIPS (lpj=270000)
    [    0.000257] pid_max: default: 32768 minimum: 301
    [    0.000357] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000363] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.006096] CPU: Testing write buffer coherency: ok
    [    0.006311] CPU0: update cpu_power 1024
    [    0.006318] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006373] Setting up static identity map for 0x5d5bc8 - 0x5d5c20
    [    0.009512] CPU1: Booted secondary processor
    [    0.009537] CPU1: update cpu_power 1024
    [    0.009540] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.009627] Brought up 2 CPUs
    [    0.009638] SMP: Total of 2 processors activated.
    [    0.009643] CPU: All CPU(s) started in SVC mode.
    [    0.010093] devtmpfs: initialized
    [    0.013860] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0                                                                                                                                                              rev 0
    [    0.042856] regulator-dummy: no parameters
    [    0.043048] NET: Registered protocol family 16
    [    0.045597] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.045798] cpuidle: using governor ladder
    [    0.045804] cpuidle: using governor menu
    [    0.047001] irq: no irq domain found for /rdb/interrupt-controller@f040a580 !
    [    0.047095] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
    [    0.048987] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040452f] regist                                                                                                                                                             ered
    [    0.049094] syscon f0442400.syscon: regmap [mem 0xf0442400-0xf04427ff] regist                                                                                                                                                             ered
    [    0.049196] syscon f0462000.syscon: regmap [mem 0xf0462000-0xf04620ff] regist                                                                                                                                                             ered
    [    0.049290] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf0404157] regist                                                                                                                                                             ered
    [    0.049384] syscon f0404158.syscon: regmap [mem 0xf0404158-0xf040418f] regist                                                                                                                                                             ered
    [    0.049486] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070f] regist                                                                                                                                                             ered
    [    0.049581] syscon f0410710.syscon: regmap [mem 0xf0410710-0xf0410717] regist                                                                                                                                                             ered
    [    0.049696] syscon f0501004.syscon: regmap [mem 0xf0501004-0xf0501403] regist                                                                                                                                                             ered
    [    0.049789] syscon f0901004.syscon: regmap [mem 0xf0901004-0xf0901403] regist                                                                                                                                                             ered
    [    0.049876] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] regist                                                                                                                                                             ered
    [    0.049972] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] regist                                                                                                                                                             ered
    [    0.050092] syscon f0440154.syscon: regmap [mem 0xf0440154-0xf0440157] regist                                                                                                                                                             ered
    [    0.050179] syscon f0440354.syscon: regmap [mem 0xf0440354-0xf0440357] regist                                                                                                                                                             ered
    [    0.050270] syscon f0440400.syscon: regmap [mem 0xf0440400-0xf0440403] regist                                                                                                                                                             ered
    [    0.050661] No ATAGs?
    [    0.050679] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint                                                                                                                                                              registers.
    [    0.050684] hw-breakpoint: maximum watchpoint size is 8 bytes.
    [    0.151113] brcm-pci f0470000.pcie: link down
    [    0.155961] bio: create slab <bio-0> at 0
    [    0.156451] SCSI subsystem initialized
    [    0.156554] libata version 3.00 loaded.
    [    0.156706] usbcore: registered new interface driver usbfs
    [    0.156742] usbcore: registered new interface driver hub
    [    0.156808] usbcore: registered new device driver usb
    [    0.156854] Linux video capture interface: v2.00
    [    0.156903] pps_core: LinuxPPS API ver. 1 registered
    [    0.156907] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                                                                                                                             tti <giometti@linux.it>
    [    0.156922] PTP clock support registered
    [    0.157189] Advanced Linux Sound Architecture Driver Initialized.
    [    0.157515] Bluetooth: Core ver 2.18
    [    0.157543] NET: Registered protocol family 31
    [    0.157548] Bluetooth: HCI device and connection manager initialized
    [    0.157559] Bluetooth: HCI socket layer initialized
    [    0.157567] Bluetooth: L2CAP socket layer initialized
    [    0.157591] Bluetooth: SCO socket layer initialized
    [    0.157876] cfg80211: Calling CRDA to update world regulatory domain
    [    0.158072] Switched to clocksource arch_sys_counter
    [    0.158266] FS-Cache: Loaded
    [    0.159173] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.159259] NET: Registered protocol family 2
    [    0.159719] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.159768] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.159851] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.159933] TCP: reno registered
    [    0.159942] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.159965] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.160113] NET: Registered protocol family 1
    [    0.160320] RPC: Registered named UNIX socket transport module.
    [    0.160326] RPC: Registered udp transport module.
    [    0.160329] RPC: Registered tcp transport module.
    [    0.160333] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.160341] PCI: CLS 0 bytes, default 64
    [    0.160626] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counte                                                                                                                                                             rs available
    [    0.161258] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.170596] bounce pool size: 64 pages
    [    0.171229] NFS: Registering the id_resolver key type
    [    0.171269] Key type id_resolver registered
    [    0.171274] Key type id_legacy registered
    [    0.171285] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.171290] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    0.171624] fuse init (API version 7.22)
    [    0.171744] msgmni has been set to 1466
    [    0.172576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                                                                                             52)
    [    0.172584] io scheduler noop registered
    [    0.172589] io scheduler deadline registered
    [    0.172606] io scheduler cfq registered (default)
    [    0.172884] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs:                                                                                                                                                              259, 260
    [    0.173181] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
    [    0.173794] brcm-cma brcm-cma.0: Added CMA device @ PA=0x10000000 LEN=0x1f800                                                                                                                                                             000
    [    0.191007] brcm-cma brcm-cma.0: Pre-allocated 0x1f800000 bytes @ 0x10000000
    [    0.191681] brcm-cma brcm-cma.1: Added CMA device @ PA=0x2f800000 LEN=0x10400                                                                                                                                                             000
    [    0.201020] brcm-cma brcm-cma.1: Pre-allocated 0x10400000 bytes @ 0x2f800000
    [    0.201705] brcm-cma brcm-cma.2: Added CMA device @ PA=0x80000000 LEN=0x40000                                                                                                                                                             000
    [    0.235798] brcm-cma brcm-cma.2: Pre-allocated 0x40000000 bytes @ 0x80000000
    [    0.236144] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.237239] f040b000.serial: ttyS0 at MMIO 0xf040b000 (irq = 108, base_baud =                                                                                                                                                              5062500) is a 16550A
    [    1.119809] console [ttyS0] enabled
    [    1.123665] f040b040.serial: ttyS1 at MMIO 0xf040b040 (irq = 109, base_baud =                                                                                                                                                              5062500) is a 16550A
    [    1.132896] f040b080.serial: ttyS2 at MMIO 0xf040b080 (irq = 110, base_baud =                                                                                                                                                              5062500) is a 16550A
    [    1.144308] loop: module loaded
    [    1.147845] ahci strict-ahci.0: can't get clock
    [    1.152521] ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
    [    1.178097] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 im                                                                                                                                                             pl platform mode
    [    1.186636] ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part
    [    1.196030] scsi0 : ahci_platform
    [    1.199645] scsi1 : ahci_platform
    [    1.203108] ata1: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x1                                                                                                                                                             00 irq 72
    [    1.211047] ata2: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x1                                                                                                                                                             80 irq 72
    [    1.219895] spi_brcmstb f0443400.spi: 1-lane output, 3-byte address
    [    1.226238] spi_brcmstb f0443400.spi: master is unqueued, this is deprecated
    [    1.233637] m25p80 spi32766.0: found mx25l3255e, expected m25p80
    [    1.239666] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
    [    1.244920] 5 ofpart partitions found on MTD device spi32766.0
    [    1.250767] Creating 5 MTD partitions on "spi32766.0":
    [    1.255915] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    1.261835] 0x000000200000-0x000000210000 : "flash0.macadr"
    [    1.267858] 0x000000210000-0x000000220000 : "flash0.nvram"
    [    1.273801] 0x000000220000-0x000000230000 : "flash0.devtree"
    [    1.279940] 0x000000000000-0x000000400000 : "flash0"
    [    1.285713] libphy: Fixed MDIO Bus: probed
    [    1.290411] bcmgenet f0b60000.ethernet: GENET 4.3 EPHY: 0x1002
    [    1.298089] libphy: bcmgenet MII bus: probed
    [    1.320394] bcmgenet f0b60000.ethernet: configuring instance for internal PHY
    [    1.328198] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.334038] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [    1.458586] xhci-brcm: xHCI BRCM driver
    [    1.462560] xhci-brcm f0481000.xhci: xHCI Host Controller
    [    1.468101] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus num                                                                                                                                                             ber 1
    [    1.475994] xhci-brcm f0481000.xhci: irq 116, io mem 0xf0481000
    [    1.482413] hub 1-0:1.0: USB hub found
    [    1.486189] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    1.493474] xhci-brcm f0481000.xhci: xHCI Host Controller
    [    1.498989] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus num                                                                                                                                                             ber 2
    [    1.506963] hub 2-0:1.0: USB hub found
    [    1.510746] hub 2-0:1.0: 2 ports detected
    [    1.515004] ehci-brcm: EHCI BRCM driver
    [    1.519022] ehci-brcm f0480300.ehci: EHCI Host Controller
    [    1.524528] ehci-brcm f0480300.ehci: new USB bus registered, assigned bus num                                                                                                                                                             ber 3
    [    1.542260] ehci-brcm f0480300.ehci: irq 112, io mem 0xf0480300
    [    1.568080] ehci-brcm f0480300.ehci: USB 2.0 started, EHCI 1.00
    [    1.574409] hub 3-0:1.0: USB hub found
    [    1.578197] hub 3-0:1.0: 1 port detected
    [    1.582333] ehci-brcm f0480500.ehci: EHCI Host Controller
    [    1.587847] ehci-brcm f0480500.ehci: new USB bus registered, assigned bus num                                                                                                                                                             ber 4
    [    1.605558] ehci-brcm f0480500.ehci: irq 113, io mem 0xf0480500
    [    1.628149] ehci-brcm f0480500.ehci: USB 2.0 started, EHCI 1.00
    [    1.634476] hub 4-0:1.0: USB hub found
    [    1.638263] hub 4-0:1.0: 1 port detected
    [    1.642407] ehci-brcm f0490300.ehci: EHCI Host Controller
    [    1.647911] ehci-brcm f0490300.ehci: new USB bus registered, assigned bus num                                                                                                                                                             ber 5
    [    1.665619] ehci-brcm f0490300.ehci: irq 118, io mem 0xf0490300
    [    1.688077] ehci-brcm f0490300.ehci: USB 2.0 started, EHCI 1.00
    [    1.694396] hub 5-0:1.0: USB hub found
    [    1.699212] hub 5-0:1.0: 1 port detected
    [    1.703357] ehci-brcm f0490500.ehci: EHCI Host Controller
    [    1.708879] ehci-brcm f0490500.ehci: new USB bus registered, assigned bus num                                                                                                                                                             ber 6
    [    1.726572] ehci-brcm f0490500.ehci: irq 119, io mem 0xf0490500
    [    1.748078] ehci-brcm f0490500.ehci: USB 2.0 started, EHCI 1.00
    [    1.754412] hub 6-0:1.0: USB hub found
    [    1.758512] hub 6-0:1.0: 1 port detected
    [    1.762634] ohci-brcm: OHCI BRCM driver
    [    1.766631] ohci-brcm f0480400.ohci: BRCM OHCI controller
    [    1.772164] ohci-brcm f0480400.ohci: new USB bus registered, assigned bus num                                                                                                                                                             ber 7
    [    1.779791] ohci-brcm f0480400.ohci: irq 114, io mem 0xf0480400
    [    1.788088] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.794894] ata1.00: ATA-9: WDC WD10JUCT-63CYNY0, 01.01A01, max UDMA/133
    [    1.801620] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [    1.809021] ata1.00: configured for UDMA/133
    [    1.813587] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JUCT-63C 01.0 PQ                                                                                                                                                             : 0 ANSI: 5
    [    1.822170] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/93                                                                                                                                                             1 GiB)
    [    1.829849] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.829907] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.840568] sd 0:0:0:0: [sda] Write Protect is off
    [    1.845367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.850492] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
    [    1.852626] hub 7-0:1.0: USB hub found
    [    1.852648] hub 7-0:1.0: 1 port detected
    [    1.852934] ohci-brcm f0480600.ohci: BRCM OHCI controller
    [    1.853058] ohci-brcm f0480600.ohci: new USB bus registered, assigned bus num                                                                                                                                                             ber 8
    [    1.853114] ohci-brcm f0480600.ohci: irq 115, io mem 0xf0480600
    [    1.912528] hub 8-0:1.0: USB hub found
    [    1.916303] hub 8-0:1.0: 1 port detected
    [    1.920507] ohci-brcm f0490400.ohci: BRCM OHCI controller
    [    1.926020] ohci-brcm f0490400.ohci: new USB bus registered, assigned bus num                                                                                                                                                             ber 9
    [    1.933684] ohci-brcm f0490400.ohci: irq 120, io mem 0xf0490400
    [    1.942759]  sda: sda1
    [    1.945765] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.002494] hub 9-0:1.0: USB hub found
    [    2.006267] hub 9-0:1.0: 1 port detected
    [    2.010236] usb 2-1: new SuperSpeed USB device number 2 using xhci-brcm
    [    2.010510] ohci-brcm f0490600.ohci: BRCM OHCI controller
    [    2.010628] ohci-brcm f0490600.ohci: new USB bus registered, assigned bus num                                                                                                                                                             ber 10
    [    2.010686] ohci-brcm f0490600.ohci: irq 121, io mem 0xf0490600
    [    2.048391] usb 2-1: Parent hub missing LPM exit latency info.  Power managem                                                                                                                                                             ent will be impacted.
    [    2.072495] hub 10-0:1.0: USB hub found
    [    2.076354] hub 10-0:1.0: 1 port detected
    [    2.080579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.087122] ehci-pci: EHCI PCI platform driver
    [    2.091630] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.097823] ohci-pci: OHCI PCI platform driver
    [    2.102452] usb-storage 2-1:1.0: USB Mass Storage device detected
    [    2.108813] scsi2 : usb-storage 2-1:1.0
    [    2.112848] usbcore: registered new interface driver usb-storage
    [    2.118995] mousedev: PS/2 mouse device common for all mice
    [    2.124803] i2c /dev entries driver
    [    2.128611] IR NEC protocol handler initialized
    [    2.133148] IR RC5(x) protocol handler initialized
    [    2.137943] IR RC6 protocol handler initialized
    [    2.142502] IR JVC protocol handler initialized
    [    2.147039] IR Sony protocol handler initialized
    [    2.151668] IR RC5 (streamzap) protocol handler initialized
    [    2.157245] IR SANYO protocol handler initialized
    [    2.161959] IR MCE Keyboard/mouse protocol handler initialized
    [    2.167862] usbcore: registered new interface driver btusb
    [    2.173432] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    2.179214] sdhci: Secure Digital Host Controller Interface driver
    [    2.185400] sdhci: Copyright(c) Pierre Ossman
    [    2.189772] sdhci-pltfm: SDHCI platform and OF driver helper
    [    2.196554] mmc0: no vqmmc regulator found
    [    2.198111] usb 5-1: new high-speed USB device number 2 using ehci-brcm
    [    2.207310] mmc0: no vmmc regulator found
    [    2.218090] ata2: SATA link down (SStatus 0 SControl 300)
    [    2.248080] mmc0: SDHCI controller on f0440000.sdhci [f0440000.sdhci] using A                                                                                                                                                             DMA
    [    2.256550] mmc1: no vqmmc regulator found
    [    2.260663] mmc1: no vmmc regulator found
    [    2.308077] mmc1: SDHCI controller on f0440200.sdhci [f0440200.sdhci] using A                                                                                                                                                             DMA
    [    2.315615] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.321192] usbcore: registered new interface driver usbhid
    [    2.326771] usbhid: USB HID core driver
    [    2.332775] TCP: cubic registered
    [    2.336098] NET: Registered protocol family 17
    [    2.340718] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    2.346648] Bluetooth: HIDP socket layer initialized
    [    2.351712] Key type dns_resolver registered
    [    2.356101] Registering SWP/SWPB emulation handler
    [    2.363229] regulator-dummy: disabling
    [    2.376907] ALSA device list:
    [    2.381930]   No soundcards found.
    [    2.387607] Waiting for root device /dev/mmcblk0p4...
    [    2.641723] mmc1: BKOPS_EN bit is not set
    [    2.651971] mmc1: new high speed MMC card at address 0001
    [    2.657652] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
    [    2.662300] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    2.668330] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    2.677441]  mmcblk0: p1 p2 p3 p4
    [    2.681929]  mmcblk0boot1: unknown partition table
    [    2.687356]  mmcblk0boot0: unknown partition table
    [    2.719346] EXT4-fs: Warning: mounting with data=journal disables delayed all                                                                                                                                                             ocation and O_DIRECT support!
    [    2.734840] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode                                                                                                                                                             . Opts: data=journal
    [    2.743765] VFS: Mounted root (ext4 filesystem) on device 179:4.
    [    2.753588] devtmpfs: mounted
    [    2.756845] Freeing unused kernel memory: 248K (c07e3000 - c0821000)
    [    3.108973] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ                                                                                                                                                             : 0 ANSI: 6
    [    3.118368] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    3.124409] sd 2:0:0:0: [sdb] 244383744 512-byte logical blocks: (125 GB/116                                                                                                                                                              GiB)
    [    3.132925] sd 2:0:0:0: [sdb] Write Protect is off
    [    3.137755] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [    3.143216] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doe                                                                                                                                                             sn't support DPO or FUA
    [    3.179267] random: nonblocking pool is initialized
    [    3.184242]  sdb: sdb1
    [    3.189630] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    3.518282] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:                                                                                                                                                              (null)
    [    3.542747] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:                                                                                                                                                              (null)
    [    4.287321] SGI XFS with security attributes, realtime, large block/inode num                                                                                                                                                             bers, no debug enabled
    [    4.588107] usb 5-1: reset high-speed USB device number 2 using ehci-brcm
    [    4.747711] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 d                                                                                                                                                             etected
    [    4.783584] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
    [    4.791689] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [    4.816966] usbcore: registered new interface driver rt2800usb
    [    4.864319] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
    [    5.970262] procmk_init
    [    5.976102] bcm_event: module license 'Proprietary' taints kernel.
    [    5.982334] Disabling lock debugging due to kernel taint
    [    6.525674] alloc_contig_range: [8949b, 9949b) PFNs busy
    [    9.338711] DVB: registering new adapter (_vuplus_solo4k_)
    [    9.848818] bcm7376: hotplug_callback():
    [    9.848818] Hotplug - status.connected 1:0:1
    [    9.855822] bcm7376: hotplug_callback():
    [    9.855822] Hotplug - connecting HDMI to display 0xe
    [   10.158116] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    [   10.258213] [MPVR]: >> misc_pvr_init
    [   10.264568] [VID]: 6bcm7335_video_init
    [   10.408473] [AUD]: 6bcm7335_audio_init
    [   10.428184] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=cc8b8                                                                                                                                                             000 state=c9235000  config=bf876874
    [   10.438447] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.446393] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=ccf7a                                                                                                                                                             000 state=c8cfd800  config=bf87687c
    [   10.456641] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.466165] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=cccef                                                                                                                                                             c00 state=c8cfd000  config=bf876884
    [   10.476434] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.486303] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=ccf7a                                                                                                                                                             400 state=ccaa8800  config=bf87688c
    [   10.496573] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.505837] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=cccb9                                                                                                                                                             400 state=ccaa8000  config=bf876894
    [   10.516120] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.524098] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=cccb9                                                                                                                                                             c00 state=c9227800  config=bf87689c
    [   10.534345] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.548309] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=ccdd6                                                                                                                                                             400 state=c9227000  config=bf8768a4
    [   10.558541] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.566399] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=ccdd6                                                                                                                                                             c00 state=c8c3d800  config=bf8768ac
    [   10.576624] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                                                                                                                                             ...
    [   10.584686] bcm7376: bcm7335_frontend_init(): vtuner1 : 9
    [   10.768700] input: dreambox advanced remote control (native) as /devices/virt                                                                                                                                                             ual/input/input0
    [   10.800308] [LCD]: registered
    [   10.804694]
    [   10.804694]  000 I2C Device : c9a1f200>>Reset>>I2CDeviceInitialize
    [   11.358395] [CI]: registered ci0
    [   11.398719] [CI]: CI interface initialised
    [   11.398719]
    [   11.458439] [DFP]: registered dbox fp
    [   11.478944] [SC]: registered sci0
    [   11.484299] [SC]: registered sci1
    [   13.128101] system_time_set wakeup mode get
    [   13.188118] system_time_set wakeup mode get 0xc3
    [   13.446825] i2c-core: Attempt to register an adapter with no name!
    [   13.453105] i2c-core: Attempt to register an adapter with no name!
    [   13.724935] [VID]: VIDEO_SET_STREAMTYPE 0
    [   13.730438] [VID]: VIDEO_SELECT_SOURCE 1  0
    [   13.734921] [VID]: VIDEO_PLAY 1  2 0
    [   13.744219] [VID]: VIDEO_CONTINUE 1  1
    [   13.748634] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
    [   13.948230] f0b60000.etherne:01: Broadcom BCM7366 PHY revision: 0x10, patch:                                                                                                                                                              2
    [   14.005487] NET: Registered protocol family 10
    [   14.011830] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.025190] [VID]: VIDEO_STOP 0  1
    [   14.029615] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   15.948286] libphy: f0b60000.etherne:01 - Link is Down
    [   16.833947] [VID]: VIDEO_SET_STREAMTYPE 0
    [   16.839320] [VID]: VIDEO_SELECT_SOURCE 1  0
    [   16.843879] [VID]: VIDEO_PLAY 1  2 0
    [   16.852979] [VID]: VIDEO_CONTINUE 1  1
    [   16.857033] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
    [   17.133114] [VID]: VIDEO_STOP 0  1
    [   17.137567] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   17.444612] libphy: f0b60000.etherne:01 - Link is Up - 1000/Full
    [   17.451037] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   24.350677] [AUD]: HDMI Max Audio PCM Channels=8
    [   31.299117] [AUD]: AUDIO_SET_MUTE 0
    [   31.318432] [AUD]: AUDIO_SET_MIXER -928539000
    [   31.323007] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    [   31.328112] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
    [   31.334870] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [   33.275305] [AUD]: AUDIO_SET_MIXER -928539000
    [   33.279811] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    [   33.284868] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [   33.291857] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [   35.870136] FE tune
    [   35.977688] [AUD]: AUDIO_SELECT_SOURCE 0
    [   35.982358] [AUD]: AUDIO_SET_BYPASS_MODE 0
    [   35.986588] [AUD]: AC3 downmix 1  state : 1
    [   35.991080] [AUD]: AUDIO_PAUSE 2584516
    [   35.994965] [AUD]: AUDIO_PLAY 2584516 decoder start : 0
    [   36.007212] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   36.011759] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
    [   36.017693] [VID]: VIDEO_GET_SIZE aspect: 1 0
    [   36.022149] [VID]: VIDEO_SET_STREAMTYPE 1
    [   36.026587] [VID]: VIDEO_FREEZE 2584516  0
    [   36.030798] [VID]: VIDEO_PLAY 2584516  5 2
    [   36.042626] [VID]: VIDEO_SLOWMOTION 0    1
    [   36.049217] [VID]: VIDEO_FAST_FORWARD 0    1
    [   36.054719] [VID]: VIDEO_CONTINUE 2584516  1
    [   36.060658] [AUD]: AUDIO_CONTINUE 2584516 1 aph=0xc8a3ba00
    [   36.067170] [AUD]: Mute : 0
    [   36.072152] [AUD]: AUDIO_CHANNEL_SELECT 0
    [   85.586591] [VID]: VIDEO_STOP 1  1
    [   85.590768] [AUD]: AUDIO_STOP 2584516
    [   85.618745] [AUD]: AUDIO_CONTINUE 2584516 0 aph=0x0
    [   85.623729] [AUD]: AUDIO_CONTINUE aph=0 0 0
    [   85.962339] FE tune
    [   86.064898] [AUD]: AUDIO_SELECT_SOURCE 0
    [   86.069964] [AUD]: AUDIO_SET_BYPASS_MODE 0
    [   86.074355] [AUD]: AC3 downmix 1  state : 1
    [   86.078632] [AUD]: AUDIO_PAUSE 2584516
    [   86.082526] [AUD]: AUDIO_PLAY 2584516 decoder start : 0
    [   86.092122] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   86.096409] [VID]: VIDEO_SET_STREAMTYPE 1
    [   86.100808] [VID]: VIDEO_FREEZE 2584516  0
    [   86.104936] [VID]: VIDEO_PLAY 2584516  5 2
    [   86.116662] [VID]: VIDEO_SLOWMOTION 0    1
    [   86.121811] [VID]: VIDEO_FAST_FORWARD 0    1
    [   86.127358] [VID]: VIDEO_CONTINUE 2584516  1
    [   86.133139] [AUD]: AUDIO_CONTINUE 2584516 1 aph=0xc8a3b200
    [   86.139936] [AUD]: Mute : 0
    [   86.150901] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
    [   86.157981] [VID]: VIDEO_GET_SIZE aspect: 1 0
    [   87.447960] [VID]: VIDEO_STOP 1  1
    [   87.451869] [AUD]: AUDIO_STOP 2584516
    [   87.479934] [AUD]: AUDIO_CONTINUE 2584516 0 aph=0x0
    [   87.484822] [AUD]: AUDIO_CONTINUE aph=0 0 0
    [   87.817135] FE tune
    [   87.943718] [AUD]: AUDIO_SELECT_SOURCE 0
    [   87.948832] [AUD]: AUDIO_SET_BYPASS_MODE 0
    [   87.953436] [AUD]: AC3 downmix 1  state : 1
    [   87.957795] [AUD]: AUDIO_PAUSE 2584516
    [   87.961869] [AUD]: AUDIO_PLAY 2584516 decoder start : 0
    [   87.971477] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   87.975903] [VID]: VIDEO_SET_STREAMTYPE 1
    [   87.980285] [VID]: VIDEO_FREEZE 2584516  0
    [   87.984414] [VID]: VIDEO_PLAY 2584516  5 2
    [   87.996165] [VID]: VIDEO_SLOWMOTION 0    1
    [   88.001400] [VID]: VIDEO_FAST_FORWARD 0    1
    [   88.007023] [VID]: VIDEO_CONTINUE 2584516  1
    [   88.013005] [AUD]: AUDIO_CONTINUE 2584516 1 aph=0xc8a3b680
    [   88.020549] [AUD]: Mute : 0
    [   88.039744] Unable to handle kernel paging request at virtual address b58f600                                                                                                                                                             0
    [   88.047004] pgd = c89f1900
    [   88.049765] [b58f6000] *pgd=08a06003, *pmd=08a18003, *pte=00000000
    [   88.056043] Internal error: Oops: a07 [#1] SMP ARM
    [   88.060842] Modules linked in: ipv6 brcmfb(O) dvb_bcm7376(PO) dvb_base(PO) bc                                                                                                                                                             m_event(PO) procmk(O) rt2800usb rt2800lib rt2x00usb rt2x00lib mac80211 xfs libcr                                                                                                                                                             c32c
    [   88.075481] CPU: 1 PID: 837 Comm: enigma2 Tainted: P           O 3.14.28-1.8                                                                                                                                                              #1
    [   88.082809] task: c8a2a4c0 ti: c8a78000 task.ti: c8a78000
    [   88.088236] PC is at string.isra.7+0x8c/0xdc
    [   88.092517] LR is at string.isra.7+0x30/0xdc
    [   88.096798] pc : [<c028112c>]    lr : [<c02810d0>]    psr: 200f0013
    [   88.096798] sp : c8a79e08  ip : b58f6001  fp : c086c7fa
    [   88.108288] r10: 4a709fff  r9 : ffffffff  r8 : 00000000
    [   88.113518] r7 : bf8662e1  r6 : ffffffff  r5 : b58f6001  r4 : fffffffe
    [   88.120052] r3 : 00000030  r2 : bf8662e1  r1 : bf8662df  r0 : 00000001
    [   88.126589] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
    [   88.133732] Control: 30c5387d  Table: 089f1900  DAC: 55555555
    [   88.139485] Process enigma2 (pid: 837, stack limit = 0xc8a78238)
    [   88.145500] Stack: (0xc8a79e08 to 0xc8a7a000)
    [   88.149862] 9e00:                   b58f6000 bf8584d4 bf8584d6 00000002 c8a79                                                                                                                                                             e7c c028247c
    [   88.158049] 9e20: ffffffff ffffffff ffffffff ffffffff 00000101 b58f6000 ff0a0                                                                                                                                                             004 ffffffff
    [   88.166235] 9e40: 00000000 c0282c84 00000400 bf8662e0 b58f6000 c000f1e4 c8a78                                                                                                                                                             000 00000000
    [   88.174422] 9e60: bea08294 c0282ca8 bf144bbc c8a79e78 bf81454c bf8584d4 bf866                                                                                                                                                             2e0 bf8662e1
    [   88.182609] 9e80: 00000001 00000000 00000000 00000500 000002d0 00000000 00000                                                                                                                                                             000 00000000
    [   88.190795] 9ea0: 00000000 00000001 00000001 00000000 00000000 ffff0001 fffff                                                                                                                                                             fff 0000ffff
    [   88.198982] 9ec0: 00000000 00000002 00000001 00000000 00000000 00000003 00000                                                                                                                                                             000 00001a80
    [   88.207168] 9ee0: 00500000 00000000 00009000 00000000 00000000 00000000 00000                                                                                                                                                             000 00000000
    [   88.215354] 9f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000                                                                                                                                                             000 00000000
    [   88.223541] 9f20: 00000101 00000000 0358fdb1 00000000 c082a754 00000001 00000                                                                                                                                                             000 00000000
    [   88.231727] 9f40: ccc6be80 c011a548 c8a79f88 b58f6000 c8a79f88 ccc4a980 b58f6                                                                                                                                                             000 c00cd678
    [   88.239913] 9f60: 00000022 00000000 bea08294 ccc4a980 ccc4a983 00000400 b58f6                                                                                                                                                             000 c000f1e4
    [   88.248100] 9f80: c8a78000 c00cdd10 00000000 00000000 00000001 0287d578 00000                                                                                                                                                             006 ffffffff
    [   88.256286] 9fa0: 00000003 c000f060 0287d578 00000006 0000003f b58f6000 00000                                                                                                                                                             400 00000000
    [   88.264472] 9fc0: 0287d578 00000006 ffffffff 00000003 00000000 891948f4 00000                                                                                                                                                             006 bea08294
    [   88.272658] 9fe0: 00000000 bea08218 00000000 b62cb448 800f0010 0000003f 102c7                                                                                                                                                             4e2 8b423a1a
    [   88.280856] [<c028112c>] (string.isra.7) from [<c028247c>] (vsnprintf+0x1a0/0                                                                                                                                                             x460)
    [   88.288439] [<c028247c>] (vsnprintf) from [<c0282ca8>] (sprintf+0x24/0x34)
    [   88.295350] [<c0282ca8>] (sprintf) from [<bf81454c>] (proc_read_vmpeg_yres+0x                                                                                                                                                             108/0x114 [dvb_bcm7376])
    [   88.304609] [<bf81454c>] (proc_read_vmpeg_yres [dvb_bcm7376]) from [<c011a548                                                                                                                                                             >] (proc_reg_read+0x58/0x80)
    [   88.314193] [<c011a548>] (proc_reg_read) from [<c00cd678>] (vfs_read+0x94/0x1                                                                                                                                                             3c)
    [   88.321602] [<c00cd678>] (vfs_read) from [<c00cdd10>] (SyS_read+0x44/0x9c)
    [   88.328491] [<c00cdd10>] (SyS_read) from [<c000f060>] (ret_fast_syscall+0x0/0                                                                                                                                                             x30)
    [   88.335985] Code: e1560005 e2855001 e2877001 85573001 (85453001)
    [   88.342151] ---[ end trace 680410faa89a66af ]---
    root@SatWZ:~#
    Geändert von Papi2000 (21.11.2015 um 23:22 Uhr) Grund: in Code gesetzt - das ist aber kein Dateianhang...

  8. #8
    Mitglied
    Registriert seit
    16.08.2014
    Beiträge
    66
    Themenstarter
    Total Downloaded
    55,62 MB
    Total Downloaded
    55,62 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue Quad Plus
     
     
    Box 2:
    VU+ Ultimo 4k
     
     
    Hängt wieder anscheinend vom Programmplatz unabhängig. Log hat er angelegt nachdem ich ihn mit putty neugestartet habe.
    Angehängte Dateien Angehängte Dateien

  9. #9
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    10.871
    Total Downloaded
    592,97 MB
    Total Downloaded
    592,97 MB
    ReceiverDankeAktivitäten
    Box 1:
    GigaBlue Q-SSC / Q+-SSC / weitere
     
     
    Box 2:
    DM900uhd-SS / Vu+Duo
     
     
    Box 3:
    Sogno 800HD Revo Triple 8800HD-SS
     
     
    Box 4:
    E4HD FormF3 AX Triplex VIP2-CC
     
     
    Box 5:
    diverse andere . . .
     
     
    Ja. Oben sieht man auch schon den Crash beim Umschalten. Muß Cap was dazu sagen.
    Grüßle
    Ralf
    ------------------------------------------------------------------------------------------------------------------------
    Gigablue Quad 4K-multi,Quad+-SSC,Quad-SSC, andere Gigas, Astra 19.2E, UniCable & KabelBW, oATV/ OpenMips
    (weitere: DM900uhd,Vu+Duo,Technisat,Edision),PC-DVB-S/C/T,PCH-A110,Xtreamer,BDP5200
    UE32C5700,UE65HU7590,LG42R51
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  10. #10
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.420
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    Das ist ein Treiber Bug der würde schon reportet an vu , da müssen wir auf vu warten das sie das fixen.

    Ich hab den auch schon 2 mal gehabt , wurde mit dem letzten Treiber Update von vu schlimmer davor hatte ich das noch nicht,

    also kein Image Problem.


    Zum Mount Problem klasse das ist auch mit dem Update heute schon imm Image !.


    openATV we are open Source

    Boykott GPL violator


Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 23:26 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com