Thanks Thanks:  0
Seite 2 von 2 ErsteErste 12
Ergebnis 11 bis 15 von 15
  1. #11
    Anfänger
    Registriert seit
    19.07.2013
    Beiträge
    15
    Themenstarter
    Total Downloaded
    13,82 MB
    Total Downloaded
    13,82 MB
    ReceiverDankeAktivitäten
    Habe stick abgezogen selber Fehler wie vorher mit Stick in der Vu startet sie ganz normal unglaublich .
    Kann die Loge Files auch mal Posen wenn gewünscht .

    •   Alt Advertising

       

  2. #12
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    poste mal die ausgabe von dmesg



  3. #13
    Anfänger
    Registriert seit
    19.07.2013
    Beiträge
    15
    Themenstarter
    Total Downloaded
    13,82 MB
    Total Downloaded
    13,82 MB
    ReceiverDankeAktivitäten
    Code:
    RAM (from CFE)
    bootconsole [early0] enabled
    CPU revision is: 00025a11 (Brcm4380)
    FPU revision is: 00130001
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
     memory: 30000000 @ 20000000 (usable)
    bmem: adding 57 MB LINUX region at 6 MB (0x03939000@0x006c7000)
    bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
    bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
    bmem: adding 512 MB LINUX region at 768 MB (0x20000000@0x30000000)
    Zone PFN ranges:
      Normal   0x00000000 -> 0x00050000
    Movable zone start PFN for each node
    Early memory PFN ranges
        0: 0x00000000 -> 0x00010000
        0: 0x00020000 -> 0x00050000
    On node 0 totalpages: 262144
    free_area_init_node: node 0, pgdat 80668700, node_mem_map 81000000
      Normal zone: 2560 pages used for memmap
      Normal zone: 0 pages reserved
      Normal zone: 259584 pages, LIFO batch:31
    PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768
    pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096
    pcpu-alloc: [0] 0 [0] 1 
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259584
    Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (orLinux version 3.3.8-2.0 (oa2@builder) (gcc version 4.8.2 (GCC) ) #1 SMP Wed Feb 26 07:42:38 CET 2014
    Fetching vars from bootloader... found 16 vars.
    Options: moca=0 sata=1 pcie=0 usb=1
    Using 1024 MB + 0 MBder: 6, 262144 bytes)
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    Memory: 571756k/1048576k available (5365k kernel code, 476820k reserved, 1262k data, 188k init, 0k highmem)
    Hierarchical RCU implementation.
    NR_IRQS:160
    Measuring MIPS counter frequency...
    Detected MIPS clock frequency: 1305 MHz (163.135 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    bcm40nm_pm_moca_disable 00
    SMP: Booting CPU1...
    CPU revision is: 00025a11 (Brcm4380)
    FPU revision is: 00130001
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    SMP: CPU1 is running
    Brought up 2 CPUs
    devtmpfs: initialized
    NET: Registered protocol family 16
    USB0: power enable is active high; overcurrent is active low
    USB1: power enable is active high; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Advanced Linux Sound Architecture Driver Version 1.0.24.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switching to clocksource wktmr
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.18)
    msgmni has been set to 1116
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
    console [ttyS0] enabled, bootconsole disabled
    serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A
    loop: module loaded
    __clk_enable: sata [1]
    bcm40nm_pm_sata_enable 00
    ahci: SSS flag set, parallel bus scan disabled
    ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    ahci strict-ahci.0: flags: ncq sntf stag clo slum part 
    scsi0 : ahci_platform
    scsi1 : ahci_platform
    ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
    ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
    brcmstb_nand: NAND controller driver is loaded
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm40nm_pm_genet_enable 00
    Found PHY at Address 3
    Config GPHY through MDIO
    __clk_disable: enet [0]
    bcm40nm_pm_genet_disable 00
    __clk_disable: network [0]
    __clk_enable: network [1]
    __clk_enable: moca_genet [1]
    bcm40nm_pm_genet1_enable 00
    __clk_enable: moca [1]
    bcm40nm_pm_moca_enable 00
    ata1: SATA link down (SStatus 0 SControl 300)
    No PHY detected, not registering interface:1
    ata2: SATA link down (SStatus 0 SControl 300)
    __clk_disable: moca [0]
    bcm40nm_pm_moca_disable 00
    __clk_disable: moca_genet [0]
    bcm40nm_pm_genet1_disable 00
    __clk_disable: network [0]
    bcmgenet: probe of bcmgenet.1 failed with error -5
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    __clk_enable: usb [1]
    bcm40nm_pm_usb_enable 00
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    lirc_dev: IR Remote Control driver registered, major 254 
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR SANYO protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    IR LIRC bridge handler initialized
    usbcore: registered new interface driver btusb
    Bluetooth: Generic Bluetooth SDIO driver ver 0.1
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    ALSA device list:
      No soundcards found.
    TCP cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS0: setting up NAND flash (primary)
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
    brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: bad block at 0x0000037c0000
    nand_read_bbt: bad block at 0x000003de0000
    nand_read_bbt: bad block at 0x000004b00000
    nand_read_bbt: bad block at 0x000006020000
    nand_read_bbt: bad block at 0x000007340000
    Creating 4 MTD partitions on "brcmnand.0":
    0x000001f00000-0x000010000000 : "rootfs"
    0x000001f00000-0x000010000000 : "rootfs(redundant)"
    0x000000200000-0x000000900000 : "kernel"
    0x000000900000-0x000000a00000 : "mac"
    UBI: attaching mtd0 to ubi0
    UBI: physical eraseblock size:   131072 bytes (128 KiB)
    UBI: logical eraseblock size:    126976 bytes
    UBI: smallest flash I/O unit:    2048
    UBI: VID header offset:          2048 (aligned 2048)
    UBI: data offset:                4096
    usb 1-1: new high-speed USB device number 2 using ehci-brcm
    scsi2 : usb-storage 1-1:1.0
    UBI: max. sequence number:       3922
    UBI: attached mtd0 to ubi0
    UBI: MTD device name:            "rootfs"
    UBI: MTD device size:            225 MiB
    UBI: number of good PEBs:        1791
    UBI: number of bad PEBs:         9
    UBI: number of corrupted PEBs:   0
    UBI: max. allowed volumes:       128
    UBI: wear-leveling threshold:    4096
    UBI: number of internal volumes: 1
    UBI: number of user volumes:     1
    UBI: available PEBs:             0
    UBI: total number of reserved PEBs: 1791
    UBI: number of PEBs reserved for bad PEB handling: 17
    UBI: max/mean erase counter: 83/20
    UBI: image sequence number:  853495029
    UBI: background thread "ubi_bgt0d" started, PID 45
    UBIFS: parse sync
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: file system size:   223350784 bytes (218116 KiB, 213 MiB, 1759 LEBs)
    UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    UBIFS: media format:       w4/r0 (latest is w4/r0)
    UBIFS: default compressor: lzo
    UBIFS: reserved for root:  0 bytes (0 KiB)
    VFS: Mounted root (ubifs filesystem) on device 0:14.
    devtmpfs: mounted
    Freeing unused kernel memory: 188k freed
    scsi 2:0:0:0: Direct-Access     General  USB Flash Disk   1.0  PQ: 0 ANSI: 2
    sd 2:0:0:0: [sda] 31299584 512-byte logical blocks: (16.0 GB/14.9 GiB)
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sda] No Caching mode page present
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] No Caching mode page present
    sd 2:0:0:0: [sda] Assuming drive cache: write through
     sda: sda1
    sd 2:0:0:0: [sda] No Caching mode page present
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] Attached SCSI removable disk
    CIFS VFS: Error connecting to socket. Aborting operation
    CIFS VFS: Error connecting to socket. Aborting operation
    CIFS VFS: cifs_mount failed w/return code = -128
    procmk_init
    dvb_bcm7356: module license 'Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    DVB: registering new adapter (vusolo2)
    bcm7356: hotplug_callback(): 
    Hotplug - status.connected 1:0
    bcm7356: hotplug_callback(): 
    Hotplug - connecting HDMI to display 0xe
    [GP]:brcm_pwm_init
    brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    [MPVR]: >> misc_pvr_init
    [VID]: <6>bcm7335_video_init
    [AUD]: <6>bcm7335_audio_init
    DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
    DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
    input: dreambox advanced remote control (native) as /devices/virtual/input/input0
    [LCD]: registered
    0:0
    [CI]: registered ci0
    [DFP]: registered dbox fp
    [DFP]: Scart 9597 is found 4
    [SC]: registered sci0
    BKNI_P_GetTrackAllocEntry_resize: resizing from 4096->8192
    BKNI_Malloc(linuxkernel) top users:
        blocks,   bytes, filename:line
           960,  204528, ../BSEAV/lib/utils/balloc.c:35
           550,   22000, ../magnum/basemodules/mem/bmem_system.c:286
           380,   45600, magnum/commonutils/mrc/7346/bmrc_monitor.c:940
    [SC]: registered sci1
    system_time_set wakeup mode get 
    system_time_set wakeup mode get 0xc4
    fpga update driver loaded
    [VID]: VIDEO_SET_STREAMTYPE 0 
    [VID]: VIDEO_SELECT_SOURCE 1  
    [VID]: VIDEO_PLAY 1  2 0
    [VID]: VIDEO_CONTINUE 1  1 
    [VID]: VIDEO_CLEAR_BUFFER 1  1 0
    [VID]: VIDEO_STOP 0  1
    [VID]: VIDEO_SELECT_SOURCE 0
    Geändert von Thomas4711 (21.05.2014 um 14:08 Uhr) Grund: in CODE gesetzt

  4. #14
    Senior Mitglied Avatar von diddi
    Registriert seit
    12.06.2013
    Ort
    Thüringen
    Beiträge
    2.268
    Total Downloaded
    232,32 MB
    Total Downloaded
    232,32 MB
    ReceiverDankeAktivitäten
    Box 1:
    Mutant HD51 Ultra HD 4K Twin ATV 6.1
     
     
    Box 2:
    1x VU+solo2 2xDVB-S ATV 6.1
     
     
    Box 3:
    1x VU+solo2 2xDVB-S2 ATV 6.1
     
     
    Box 4:
    Mutant HD51 Ultra HD 4K Twin ATV 6.1
     
     
    Box 5:
    Mutant HD51 Ultra HD 4K Twin ATV 6.1
     
     
    Wichtig ist externe Speicher vorher abziehen und dann Flashen. Blackhole hatte ich auch ne weile drauf ,ist auch nicht schlecht. Mit HDMI CEC hatte ich nie Probleme ,nur richtig
    aktivieren.

  5. #15
    Anfänger
    Registriert seit
    19.07.2013
    Beiträge
    15
    Themenstarter
    Total Downloaded
    13,82 MB
    Total Downloaded
    13,82 MB
    ReceiverDankeAktivitäten
    Flashen habe ich gemacht so wie du es beschreibst vor ca 4 Wochen , aber das teil bootet im Moment nur mit Stick im Usb Stecker an der box .
    Hdmi cec an meinen Philips TV da komme ich mit drücken von Subtitle an de Philips FB ins Menü der Vu mit Image Open atv und mit Vti halt nicht was soll ich da einstellen .????
    Geändert von dzeva (21.05.2014 um 16:23 Uhr)


Seite 2 von 2 ErsteErste 12

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 17:56 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com