Info OpenATV 7.6-beta (de)

[Papi2000]

Ton det Box auf 100% stellen, und Wunschlautstärke am TV einstellen.

[ncc1701]

kann man den auto reboot nach update/install deaktivieren ?

[DelthaBuegel]

Die Box fragt doch, ob Du neu starten willst?

[ncc1701]

Nein, auf der octagon sf8008 ab 7.6beta (clean install) nicht mehr
da gibt es nur noch einen automatischen reboot

[DelthaBuegel]

Das die Box, nach clean-Install und evtl Rückspielen der Einstellungen, neu startet, ist doch vollkommen normal und auch so gewollt.
Nach online Update, wirst Du gefragt.
Beispiel SF 4008:

[ncc1701]

Wie hier schon von mir geschrieben...

Nein, bei mir ab 7.6beta nicht mehr

Dachte ja erst, ist ein neues Feature
Aber scheint ja nicht so zu sein

Sollen sich die Dev's mal anschauen...

[Papi2000]

dann beschreibe lieber erstmal ganz genau, was du meinst, und wie du vorgehst, damit das jemand Schritt für Schritt nachvollziehen kann.
Du schreibst was von auto reboot nach update/install.
Was für ein Update?
Was für ein install?
Das ist etwas dünn.
Wie geflasht?
In welchen Slot?
Aus welchem laufenden Image - oder per USB?
Waren andere Datenträger noch an der Box? Denn dann muß ein USB-Flash kein Clean-Flash bleiben, weil wegen der Steuerdateien in /media/hdd/images/config eine entspreched hnterlegte Restore-Aktion ausgeführt wird . . .

[ncc1701]

-Was für ein Update?-
blau -> Software aktualisieren

-Was für ein install?-
Plugins installieren vom Feed oder auch bei IPK installer (lokale Erweiterungen installieren)

-Wie geflasht?-
blau -> flashe online/lokal -> 7.6Beta
Saubere Installation

-In welchen Slot?-
1

-Aus welchem laufenden Image - oder per USB?-
aus einem laufenden 7.51

-Waren andere Datenträger noch an der Box?-
Ja, die externe HDD

[Taurus G.]

Hi,
Nach letzte vier updates nicht möglich vom Receiver streamen,oder OpenWebif benutzen.
Wird das Receiver von standby aufgerufen,starten mit. Warum ???. Dann stürzt ab, bluescreen.!!
Letzte gute update wahr 22.05.2025 !Alles ist Ordnung wahren,
wie das ich vorher haben gemeldet.
Danke,MfG
Crash-Logs:

Code: Alles auswählen

[OpenATV Enigma2 crash log

crashdate=Do Mai 29 11:51:18 2025
compiledate=May 28 2025
skin=MetrixHD/skin.MySkin.xml
sourcedate=2025-05-28
branch=master
rev=34306+96f435a
component=enigma2, signal

model=vuuno4kse
machinebuild=vuuno4kse
imageversion=7.6-beta
imagebuild=20250528

kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m

nimsockets:
NIM Socket 0:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 0
NIM Socket 1:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 1
NIM Socket 2:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 2
NIM Socket 3:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 3
NIM Socket 4:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 4
NIM Socket 5:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 5
NIM Socket 6:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 6
NIM Socket 7:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 7



11:50:14.8039 [Enigma] Python path is '/usr/lib/enigma2/python'.
11:50:14.8041 [Enigma] DVB API version 5, DVB API version minor 12.
11:50:14.8041 [Enigma] Enigma debug level 3.
11:50:14.8041 [Enigma] sourcedate 2025-05-28 / master 34306+96f435a.
11:50:29.9115 [eDVBPESReader] Created. Opening demux
11:50:29.9117 [eDVBPESReader] Created. Opening demux
11:51:18.0843 PC: 001ec668
11:51:18.0844 Fault Address: 00000000
11:51:18.0844 Error Code:: 519
11:51:18.0845 Backtrace:
11:51:18.0846 /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x87D60]
11:51:18.0848 /lib/libc.so.6(__default_rt_sa_restorer) [0xB5D6B070]
11:51:18.0851 /usr/bin/enigma2(n/a) [0x1EC668]
11:51:18.0851 -------FATAL SIGNAL


dmesg

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 4.1.20-1.9 (openATV@www.opena.tv) (gcc version 15.1.0 (GCC) ) #1 SMP Fri May 2 18:50:40 UTC 2025
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine model: UNO4KSE
<6>[    0.000000] moving dtb from 0x0000000007628000 to 0x00000000009c7cd0
<6>[    0.000000] bmem: Reserved 641 MiB at 0x0000000015e00000
<6>[    0.000000] bmem: Reserved 641 MiB at 0x0000000097e00000
<6>[    0.000000] cma: Reserved 16 MiB at 0x0000000096c00000
<4>[    0.000000] Forcing write-allocate cache policy for SMP
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 516096
<7>[    0.000000]   DMA zone: 684 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 87552 pages, LIFO batch:15
<7>[    0.000000]   HighMem zone: 428544 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 12 pages/cpu @d45ac000 s17164 r8192 d23796 u49152
<7>[    0.000000] pcpu-alloc: s17164 r8192 d23796 u49152 alloc=12*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515412
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 707272K/2064384K available (6953K kernel code, 326K rwdata, 2156K rodata, 320K init, 215K bss, 1340728K reserved, 16384K cma-reserved, 383972K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xd5800000 - 0xff000000   ( 664 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd5600000   ( 342 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc08edbec   (9111 kB)
<5>[    0.000000]       .init : 0xc08ee000 - 0xc093e000   ( 320 kB)
<5>[    0.000000]       .data : 0xc093e000 - 0xc098fbf8   ( 327 kB)
<5>[    0.000000]        .bss : 0xc0992000 - 0xc09c7cd0   ( 216 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5802000, parent irq: 93)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5808000, parent irq: 64)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580aa00, parent irq: 65)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580c640, parent irq: 95)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580e200, parent irq: 58)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd5810380, parent IRQ(s): 3)
<6>[    0.000000] MCP: Enabling write pairing
<6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[    0.000010] Switching to timer-based delay loop, resolution 37ns
<6>[    0.000335] Console: colour dummy device 80x30
<6>[    0.000352] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000361] pid_max: default: 32768 minimum: 301
<6>[    0.000450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000456] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000881] CPU: Testing write buffer coherency: ok
<6>[    0.001089] CPU0: update cpu_capacity 1024
<6>[    0.001095] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001289] Setting up static identity map for 0x8480 - 0x84d8
<6>[    0.003832] CPU1: update cpu_capacity 1024
<6>[    0.003836] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.003893] Brought up 2 CPUs
<6>[    0.003904] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[    0.003908] CPU: All CPU(s) started in SVC mode.
<6>[    0.004253] devtmpfs: initialized
<6>[    0.013311] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.013527] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.014762] NET: Registered protocol family 16
<6>[    0.016136] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[    0.023209] cpuidle: using governor ladder
<6>[    0.032215] cpuidle: using governor menu
<6>[    0.038972] No ATAGs?
<6>[    0.039004] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.039011] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.039206] Broadcom Brahma-B15 readahead cache at: 0xd5b14478
<6>[    0.054759] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
<6>[    0.054965] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
<5>[    0.055447] SCSI subsystem initialized
<7>[    0.056632] libata version 3.00 loaded.
<6>[    0.056851] usbcore: registered new interface driver usbfs
<6>[    0.056894] usbcore: registered new interface driver hub
<6>[    0.056935] usbcore: registered new device driver usb
<6>[    0.057003] Linux video capture interface: v2.00
<6>[    0.057076] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.057081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.057099] PTP clock support registered
<6>[    0.057579] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.058563] Switched to clocksource arch_sys_counter
<5>[    0.058742] FS-Cache: Loaded
<4>[    0.064195] thermal thermal_zone0: failed to read out thermal zone (-22)
<6>[    0.064300] NET: Registered protocol family 2
<6>[    0.064682] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.064707] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.064745] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.064783] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.064796] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.064902] NET: Registered protocol family 1
<6>[    0.065069] RPC: Registered named UNIX socket transport module.
<6>[    0.065073] RPC: Registered udp transport module.
<6>[    0.065076] RPC: Registered tcp transport module.
<6>[    0.065079] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.065092] PCI: CLS 0 bytes, default 64
<4>[    0.065350] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>[    0.065377] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[    0.066258] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[    0.067213] NFS: Registering the id_resolver key type
<5>[    0.067239] Key type id_resolver registered
<5>[    0.067243] Key type id_legacy registered
<6>[    0.067255] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.067262] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<5>[    0.067401] FS-Cache: Netfs 'cifs' registered for caching
<5>[    0.067447] Key type cifs.spnego registered
<6>[    0.067590] fuse init (API version 7.23)
<6>[    0.068489] bounce: pool size: 64 pages
<6>[    0.068525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    0.068538] io scheduler noop registered
<6>[    0.068545] io scheduler deadline registered
<6>[    0.068580] io scheduler cfq registered (default)
<6>[    0.068850] brcm-gisb-arb f0400000.gisb-arb: registered mem: d5b3c000, irqs: 261, 262
<6>[    0.069598] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
<6>[    0.069979] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<4>[    0.070025] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
<6>[    0.170162] brcm-pci f0460000.pcie: link down
<6>[    0.170209] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
<4>[    0.170244] brcm-pci f0490000.pcie: no identity map; PCI drivers may fail
<6>[    0.270376] brcm-pci f0490000.pcie: link down
<6>[    0.271696] brcmstb_memc f1102000.memc-ddr: registered
<6>[    0.271736] brcmstb_memc f1182000.memc-ddr: registered
<6>[    0.271917] brcm-waketimer f0417580.waketimer: registered, with irq 263
<6>[    0.272124] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.273218] console [ttyS0] disabled
<6>[    0.273245] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>[    1.022377] console [ttyS0] enabled
<6>[    1.026252] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
<6>[    1.035563] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
<6>[    1.047863] loop: module loaded
<6>[    1.051843] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 0
<6>[    1.058397] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 1
<6>[    1.064964] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
<4>[    1.072373] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
<6>[    1.078415] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[    1.096582] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[    1.105565] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
<6>[    1.115238] scsi host0: brcm-ahci
<6>[    1.118804] scsi host1: brcm-ahci
<6>[    1.122278] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<6>[    1.130212] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>[    1.138148] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[    1.145290] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
<3>[    1.150929] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
<4>[    1.156965] brcmstb_qspi: probe of f03e3400.spi failed with error -22
<6>[    1.163443] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
<4>[    1.169607] m25p80 spi32766.0: found mx25l3255e, expected m25p80
<6>[    1.175632] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
<5>[    1.180887] 5 ofpart partitions found on MTD device spi32766.0
<5>[    1.186730] Creating 5 MTD partitions on "spi32766.0":
<5>[    1.191883] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[    1.197814] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[    1.203845] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[    1.209785] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[    1.215868] 0x000000000000-0x000000400000 : "flash0"
<6>[    1.221876] libphy: Fixed MDIO Bus: probed
<6>[    1.226397] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<4>[    1.232287] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
<6>[    1.251564] libphy: bcmgenet MII bus: probed
<6>[    1.276376] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[    1.282227] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
<6>[    1.288360] xhci-brcm: xHCI BRCM driver
<6>[    1.307061] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.312845] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>[    1.320965] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
<6>[    1.329872] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>[    1.336511] hub 1-0:1.0: USB hub found
<3>[    1.340296] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.347577] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[    1.353344] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>[    1.361238] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    1.369696] hub 2-0:1.0: USB hub found
<6>[    1.373478] hub 2-0:1.0: 2 ports detected
<6>[    1.377871] ehci-brcm: EHCI BRCM driver
<6>[    1.381835] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>[    1.387618] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>[    1.405617] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>[    1.412579] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    1.417575] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.417986] hub 3-0:1.0: USB hub found
<6>[    1.418008] hub 3-0:1.0: 1 port detected
<6>[    1.418263] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>[    1.418369] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>[    1.428492] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>[    1.433567] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[    1.434009] hub 4-0:1.0: USB hub found
<6>[    1.434050] hub 4-0:1.0: 1 port detected
<6>[    1.434367] ohci-brcm: OHCI BRCM driver
<6>[    1.434466] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>[    1.434604] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>[    1.434693] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>[    1.489123] hub 5-0:1.0: USB hub found
<6>[    1.489161] hub 5-0:1.0: 1 port detected
<6>[    1.489413] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>[    1.489520] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>[    1.489640] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<6>[    1.519064] ata1.00: ATA-8: WDC WD3200BEKT-60F3T1, 12.01A12, max UDMA/100
<6>[    1.525871] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>[    1.534490] ata1.00: configured for UDMA/100
<5>[    1.539001] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-6 1A12 PQ: 0 ANSI: 5
<6>[    1.539120] hub 6-0:1.0: USB hub found
<6>[    1.539158] hub 6-0:1.0: 1 port detected
<6>[    1.539490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.539504] ehci-pci: EHCI PCI platform driver
<6>[    1.539577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.539587] ohci-pci: OHCI PCI platform driver
<6>[    1.539726] usbcore: registered new interface driver usb-storage
<6>[    1.539920] mousedev: PS/2 mouse device common for all mice
<6>[    1.540397] i2c /dev entries driver
<6>[    1.541083] IR NEC protocol handler initialized
<6>[    1.541087] IR RC5(x/sz) protocol handler initialized
<6>[    1.541090] IR RC6 protocol handler initialized
<6>[    1.541093] IR JVC protocol handler initialized
<6>[    1.541096] IR Sony protocol handler initialized
<6>[    1.541099] IR SANYO protocol handler initialized
<6>[    1.541101] IR Sharp protocol handler initialized
<6>[    1.541104] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.541108] IR XMP protocol handler initialized
<6>[    1.541673] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[    1.542247] brcmstb-cpufreq f03e257c.cpu_clk_div: registered
<6>[    1.542438] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.542439] sdhci: Copyright(c) Pierre Ossman
<6>[    1.542442] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.543786] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
<6>[    1.543789] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
<6>[    1.574569] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.574727] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    1.574952] usbcore: registered new interface driver usbhid
<6>[    1.574954] usbhid: USB HID core driver
<6>[    1.577584] Initializing XFRM netlink socket
<6>[    1.601128] NET: Registered protocol family 10
<6>[    1.605720] NET: Registered protocol family 17
<6>[    1.605739] NET: Registered protocol family 15
<5>[    1.605892] Key type dns_resolver registered
<5>[    1.605943] Registering SWP/SWPB emulation handler
<6>[    1.613235] ALSA device list:
<6>[    1.613238]   No soundcards found.
<6>[    1.673205] mmc0: MAN_BKOPS_EN bit is not set
<6>[    1.679481] mmc0: new high speed MMC card at address 0001
<6>[    1.679810] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB 
<6>[    1.679877] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
<6>[    1.679936] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
<6>[    1.679996] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
<6>[    1.682511]  mmcblk0: p1 p2 p3 p4
<5>[    1.767620] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
<5>[    1.767702] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.780892] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.785704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.785750] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.897576] ata2: SATA link down (SStatus 0 SControl 300)
<6>[    4.401924]  sda: sda1 < sda5 >
<5>[    4.405787] sd 0:0:0:0: [sda] Attached SCSI disk
<4>[    4.410876] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<4>[    4.424790] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
<6>[    4.437230] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
<6>[    4.446149] VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>[    4.455806] devtmpfs: mounted
<6>[    4.458941] Freeing unused kernel memory: 320K (c08ee000 - c093e000)
<5>[    5.185553] random: nonblocking pool is initialized
<4>[    5.314810] UDF-fs: warning (device sda5): udf_fill_super: No partition found (2)
<6>[    5.607748] SGI XFS with security attributes, realtime, no debug enabled
<6>[    5.648611] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
<30>[    5.974951] udevd[969]: starting version 3.2.14
<30>[    5.998279] udevd[970]: starting eudev-3.2.14
<6>[    7.422600] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[    7.432189] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[    7.439484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    9.435672] bcmgenet f0b00000.ethernet eth0: Link is Down
<6>[   12.130430] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   12.138648] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[   15.417247] procmk_init
<4>[   15.425499] bcm_event: module license 'Proprietary' taints kernel.
<4>[   15.431706] Disabling lock debugging due to kernel taint
<6>[   15.639686] nexus.ko: virtual irq: enabled (273)
<6>[   15.644361] nexus.ko: shared gpio banks: enabled
<6>[   18.702795] DVB: registering new adapter (_vuplus_uno4kse_)
<4>[   18.989236] bcm7252s: hotplug_callback(): 
<4>[   18.989236] Hotplug - status.connected 1:0:1
<4>[   18.996360] bcm7252s: hotplug_callback(): 
<4>[   18.996360] Hotplug - connecting HDMI to display 0xe
<6>[   19.199567] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<27>[   19.233633] udevd[973]: rename '/dev/dvb/adapter7/.tmp-c212:22' '/dev/dvb/adapter7/' failed: Not a directory
<4>[   19.256589] [MPVR]: >> misc_pvr_init
<4>[   19.262519] [VID]: 6bcm7335_video_init
<4>[   19.300647] [AUD]: 6bcm7335_audio_init
<4>[   19.304714] [AUD]: >> bcm_audio_capture_init
<4>[   19.311595] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d2824c00 state=d0641000  config=bf874d08
<6>[   19.334725] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.342300] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4232800 state=d0750800  config=bf874d10
<6>[   19.361457] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.369677] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d4232000 state=d062b000  config=bf874d18
<6>[   19.390888] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.399277] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d423e800 state=d062e800  config=bf874d20
<6>[   19.419018] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.426608] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d423e000 state=d0750000  config=bf874d28
<6>[   19.445747] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.453320] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d32e7800 state=d0758800  config=bf874d30
<6>[   19.472799] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.481652] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d32e7000 state=d0758000  config=bf874d38
<6>[   19.501021] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.508647] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1   handle=d32e1800 state=d0759800  config=bf874d40
<6>[   19.527776] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[   19.535350] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
<4>[   19.557434] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[   19.565067] BKNI_Malloc(linuxkernel) top users:
<4>[   19.565067]     blocks,   bytes, filename:line
<4>[   19.574047]       1105,  237740, BSEAV/lib/utils/balloc.c:31
<6>[   19.606822] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[   19.618950] [LCD]: registered
<6>[   20.225605] [CI]: registered ci0
<6>[   20.234156] [CI]: CI interface initialised
<6>[   20.234156] 
<6>[   20.246616] [DFP]: registered dbox fp
<6>[   20.253083] [SC]: registered sci0
<4>[   21.702570] system_time_set wakeup mode get 
<4>[   21.766571] system_time_set wakeup mode get 0xc4
<4>[   22.044476] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   22.049526] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   22.053915] [VID]: VIDEO_PLAY 1  2 0
<4>[   22.062798] [VID]: VIDEO_CONTINUE 1  1 
<4>[   22.066679] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[   22.343141] [VID]: VIDEO_STOP 0  1
<4>[   22.347471] [VID]: VIDEO_SELECT_SOURCE 0  0
<6>[   24.124634] Bluetooth: Core ver 2.20
<6>[   24.128325] NET: Registered protocol family 31
<6>[   24.132805] Bluetooth: HCI device and connection manager initialized
<6>[   24.139233] Bluetooth: HCI socket layer initialized
<6>[   24.144528] Bluetooth: L2CAP socket layer initialized
<6>[   24.149781] Bluetooth: SCO socket layer initialized
<4>[   25.571189] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[   25.575389] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[   25.579792] [VID]: VIDEO_PLAY 1  2 0
<4>[   25.589161] [VID]: VIDEO_CONTINUE 1  1 
<4>[   25.593038] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[   25.869867] [VID]: VIDEO_STOP 0  1
<4>[   25.877052] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[   28.985905] UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>[   29.048761] UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>[   29.076322] UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<4>[   29.145940] UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<4>[   29.187265] UDF-fs: warning (device mtdblock2): udf_fill_super: No partition found (2)
<4>[   29.198233] isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=32, block=64
<4>[   29.244178] isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=32, block=64
<4>[   29.252666] UDF-fs: warning (device mtdblock2): udf_fill_super: No partition found (2)
<4>[   32.243708] [AUD]: HDMI Max Audio PCM Channels=8
<4>[   37.605296] [AUD]: AUDIO_SET_MUTE 0 
<4>[   37.609978] [AUD]: AUDIO_SET_MIXER -811204984 
<4>[   37.614447] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   37.619545] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[   37.626454] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   37.643652] [AUD]: AUDIO_SET_MIXER -811204984 
<4>[   37.648148] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   37.653229] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   37.660477] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   38.669087] [AUD]: AUDIO_SET_MIXER -811204984 
<4>[   38.673578] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[   38.678684] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   38.685969] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[   39.520458] FE tune
<4>[   39.896045] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[   39.900539] [AUD]: AUDIO_SET_BYPASS_MODE 0 
<4>[   39.904760] [AUD]: AC3 downmix 1  state : 1
<4>[   39.909745] [AUD]: HDMI Max Audio PCM Channels=8
<4>[   39.914431] [AUD]: AUDIO_PAUSE 0 
<4>[   39.917960] [AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[   39.927464] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[   39.931707] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
<4>[   39.938624] [VID]: VIDEO_GET_SIZE aspect: 1 3
<4>[   39.943101] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[   39.947306] [VID]: VIDEO_FREEZE -1097359636  0
<4>[   39.951802] [VID]: VIDEO_PLAY -1097359636  5 2
<4>[   39.963179] [VID]: VIDEO_SLOWMOTION 0    1
<4>[   39.967344] [VID]: VIDEO_FAST_FORWARD 0    1 0
<4>[   39.971936] [VID]: VIDEO_CONTINUE 0  1 
<4>[   39.975838] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcfa77f00
<4>[   39.980821] [AUD]: Mute : 0
<4>[   39.984384] [AUD]: AUDIO_CHANNEL_SELECT 0 
<4>[   79.200993] [VID]: VIDEO_STOP 1  1
<4>[   79.204475] [AUD]: AUDIO_STOP 14130896 
<4>[   79.213017] [AUD]: AUDIO_CONTINUE 0 0 aph=0x0
<4>[   79.217407] [AUD]: AUDIO_CONTINUE aph=0 0 0

/code]
[code][OpenATV Enigma2 crash log

crashdate=Do Mai 29 11:53:11 2025
compiledate=May 28 2025
skin=MetrixHD/skin.MySkin.xml
sourcedate=2025-05-28
branch=master
rev=34306+96f435a
component=enigma2, signal

model=vuuno4kse
machinebuild=vuuno4kse
imageversion=7.6-beta
imagebuild=20250528

kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m

nimsockets:
NIM Socket 0:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 0
NIM Socket 1:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 1
NIM Socket 2:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 2
NIM Socket 3:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 3
NIM Socket 4:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 4
NIM Socket 5:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 5
NIM Socket 6:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 6
NIM Socket 7:
	Type: DVB-S2X
	Name: Vuplus DVB-S NIM(45308X FBC)
	Frontend_Device: 7



11:51:31.0131 [Enigma] Python path is '/usr/lib/enigma2/python'.
11:51:31.0154 [Enigma] DVB API version 5, DVB API version minor 12.
11:51:31.0154 [Enigma] Enigma debug level 3.
11:51:31.0155 [Enigma] sourcedate 2025-05-28 / master 34306+96f435a.
11:51:41.6444 [eDVBPESReader] Created. Opening demux
11:51:41.6445 [eDVBPESReader] Created. Opening demux
11:53:11.1430 PC: 0020ecc8
11:53:11.1430 Fault Address: 00000000
11:53:11.1431 Error Code:: 519
11:53:11.1431 Backtrace:
11:53:11.1433 /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x87D60]
11:53:11.1434 /lib/libc.so.6(__default_rt_sa_restorer) [0xB5D69070]
11:53:11.1436 /usr/bin/enigma2(n/a) [0x20ECC8]
11:53:11.1436 -------FATAL SIGNAL


dmesg

<4>[   98.459598] [AUD]: HDMI Max Audio PCM Channels=8
<4>[  100.790383] [VID]: VIDEO_SET_STREAMTYPE 0 
<4>[  100.794579] [VID]: VIDEO_SELECT_SOURCE 1  0
<4>[  100.798884] [VID]: VIDEO_PLAY 1  2 0
<4>[  100.807890] [VID]: VIDEO_CONTINUE 1  1 
<4>[  100.811781] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[  101.088869] [VID]: VIDEO_STOP 0  1
<4>[  101.093340] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  103.333581] UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>[  103.397177] UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>[  103.424485] UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<4>[  103.493630] UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<4>[  103.535105] UDF-fs: warning (device mtdblock2): udf_fill_super: No partition found (2)
<4>[  103.546219] isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=32, block=64
<4>[  103.592234] isofs_fill_super: bread failed, dev=mtdblock2, iso_blknum=32, block=64
<4>[  103.600236] UDF-fs: warning (device mtdblock2): udf_fill_super: No partition found (2)
<4>[  105.631392] [AUD]: HDMI Max Audio PCM Channels=8
<4>[  105.737211] [AUD]: HDMI Max Audio PCM Channels=8
<4>[  109.683606] [AUD]: AUDIO_SET_MUTE 0 
<4>[  109.688287] [AUD]: AUDIO_SET_MIXER -802201976 
<4>[  109.692753] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[  109.697821] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  109.704810] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  109.719900] [AUD]: AUDIO_SET_MIXER -802201976 
<4>[  109.724374] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[  109.729450] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  109.736432] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  110.719717] [AUD]: AUDIO_SET_MIXER -802201976 
<4>[  110.724196] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[  110.729276] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  110.736261] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[  111.470622] FE tune
<4>[  111.629229] [AUD]: AUDIO_SELECT_SOURCE 0 
<4>[  111.633330] [AUD]: AUDIO_SET_BYPASS_MODE 0 
<4>[  111.637539] [AUD]: AC3 downmix 1  state : 1
<4>[  111.642429] [AUD]: HDMI Max Audio PCM Channels=8
<4>[  111.647135] [AUD]: AUDIO_PAUSE 0 
<4>[  111.650470] [AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[  111.659633] [VID]: VIDEO_SELECT_SOURCE 0  0
<4>[  111.663865] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
<4>[  111.670771] [VID]: VIDEO_GET_SIZE aspect: 1 3
<4>[  111.675169] [VID]: VIDEO_SET_STREAMTYPE 1 
<4>[  111.679352] [VID]: VIDEO_FREEZE -1096433948  0
<4>[  111.683863] [VID]: VIDEO_PLAY -1096433948  5 2
<4>[  111.695062] [VID]: VIDEO_SLOWMOTION 0    1
<4>[  111.699221] [VID]: VIDEO_FAST_FORWARD 0    1 0
<4>[  111.703866] [VID]: VIDEO_CONTINUE 0  1 
<4>[  111.707805] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcf85e980
<4>[  111.712791] [AUD]: Mute : 0
<4>[  111.716326] [AUD]: AUDIO_CHANNEL_SELECT 0 
<4>[  134.959015] FE tune
<4>[  151.055032] FE tune
<4>[  153.314507] FE tune
<4>[  155.475517] FE tune
<4>[  158.077524] FE tune
<4>[  160.241446] FE tune
<4>[  162.836813] FE tune
<4>[  165.006660] FE tune
<4>[  167.599323] FE tune
<4>[  169.761358] FE tune
<4>[  171.925326] FE tune
<4>[  174.512254] FE tune
<4>[  176.674324] FE tune
<4>[  179.277199] FE tune
<4>[  181.470371] FE tune
<4>[  183.628277] FE tune
<4>[  185.790578] FE tune
<4>[  185.806391] FE tune

/code]

[Taurus G.]

Hi,Dev
Wann wird wieder möglich von receiver Streamen ?
nach fünften neuer update noch Nicht möglich.
Bitte fixen.!
Danke.

[Papi2000]

Weiterhin Crash?
Auch nach clean Flash?
Welcher Sender?

[pethep]

Zum x-ten Mal:
sauberer flash in Slot 1 aus dem Slot 3 mit 7.6 alpha.
Netzwerk, LAN geht sofort.(will kein W-Lan)
Beide Tuner konfiguriert und Senderliste per DreamboxEdit aufgespielt.
USB Platte wird automatisch richtig "eingehängt" Einhängepunkt media/hdd
Cihelper instalier und für SKY und NC+ konfiguriert, Alles läuft
Boxpiretes Cam Manager (Für HD+) instaliiert, und geht.
Bei den beschriebenen Schritten die GUI öfters neu gestartet alles OK
Dann:
Herunterfahren Box hängt.....nur Schalter hilft
Neustart Box hängt... nur Schalter
Multiboot Box hängt.... nur Schalter
Nach dem Kaltstart (Schalter) kein Netzwerk, kein Einhängepunkt für die USB Platte,
Habe jetzt Platte manuel eingehängt um Log auf Platte zu schrelben. jetzt fährt die Box runter????
Neustart: kein Netzwerk kein Einhängepunkt für Platte, kein log....
Neustart zum Slot 3 Box hängt.... Schalter hilft.
Neustart aus Slot 3 alles OK aber au der Platte kein Log.
Neustar zum Slot 1 aus dem Multiboot , kein Netzwerk(LAN) kein Einhängepunkt für die Platte.
Netzwerk neu gestartet (Nach mehreren Versuchen) Meldung in Filezila:
Verbinde mit 192.168.178.41:21...
Status: Verbindung hergestellt, warte auf Willkommensnachricht...
Antwort: 500 OOPS: vsftpd: not found: directory given in 'secure_chroot_dir':/var/run/vsftpd/empty
Fehler: Kritischer Fehler: Herstellen der Verbindung zum Server fehlgeschlagen

Ftp mit Puty geht nich
Was kann ich tun um wenigstens das Log zu bekommen.

Die Version 7.6 Alpha im Slot 3 funzt prima ...

[Papi2000]

Dann lasse den CAMManager weg. Denn danach treten deine Probleme auf. Die sind doch aber nicht Thema hier im Form.
Und die Festplatte immer schön fest einhängen.

[pethep]

Hallo Papi2000,
Der Cammanager ist auch in der Alpha Version drin und da geht alles. Also sollte hier auch gehen.
Habe nun einpaar Logs über die Alpha auf die Unterverzeichnisse des Mooltiboot der Beta gefunden, kann sich jemand dies anschauen??

20250531-162301-enigma2-debug.log

(1.04 MiB) 7-mal heruntergeladen

20250531-161308-enigma2-debug.log

(443.89 KiB) Noch nie heruntergeladen

20250531-155657-enigma2-debug.log

(342.54 KiB) 5-mal heruntergeladen

20250531-155256-enigma2-debug.log

(259.46 KiB) 1-mal heruntergeladen

20250531-134554-enigma2-debug.log

(90.04 KiB) 2-mal heruntergeladen

[ncc1701]

im Grafischen EPG funktioniert die Zeithistorie nicht.
Obwohl auf 60min. eingestellt, werden keine vergangenen Sendungen angezeigt.

[pethep]

Dann lasse den CAMManager weg. Denn danach treten deine Probleme auf. Die sind doch aber nicht Thema hier im Form.
Und die Festplatte immer schön fest einhängen.

Hallo Papi2000,
Deine Vemutung war richtig, Der CamManager war der Schuldige.
Habe nochmal Versuche unternommen und sobald ich den CAM Manager per Putty instalierte ging der Rest in die Hose.
Jetz muß ich einen neuen Weg für meine HD+ Karte finden
Danke

[ncc1701]

Das Problem das die Octagon sf8008 bei update/install selbstständig rebootet (#42) ist nun behoben.
Sehr gut

[ncc1701]

Seit update von heute funktioniert HDMI CEC nicht mehr mit meinem Philips TV
TV in standby versetzten
TV aus standby aufwachen
funzelt nicht (mehr)

[Papi2000]

HDMI im stromlosen Zustand der Box schon kurzfristig getrennt, um 100% RESET plus neuen Resync zu erzwingen? Das kann bei manchen Datei Tauschvorgängen notwenig sein, und lässt sich nicht vermeiden.