Fehler/Bugs GigaBlue UHD Quad 4K Pro

Nachricht
Autor
satfee
Senior member
Senior member
Beiträge: 1488
Registriert: 06 Mai 2013 12:28
Hat gedankt: 259 Mal
Hat Dank erhalten: 57 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#141

Beitrag von satfee »

alexon hat geschrieben:Ich will einfach nur das die Box ohne USB Stick bootet. Sobald ich den Stick ziehe und reboote, bleibt die Box beim Startlogo hängen.
Flashe mal online , ohne USB Stick.
GigaBlue UE 4k Metrix Skin
28° - 23.5° - 19° - 13° - 9° - 4.8° - 0.8°W - 4°W
Benutzeravatar
Papi2000
Super Moderator
Super Moderator
Beiträge: 26445
Registriert: 20 Apr 2013 20:09
Receiver 1: Viele GigaBlues
Receiver 2: DM und ZGemma
Receiver 3: bissl VU
Hat gedankt: 4529 Mal
Hat Dank erhalten: 8526 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#142

Beitrag von Papi2000 »

Ich habe die Box nicht.
Hast du das aktuelle Image etwa auf den Stick als Flasherweiterung installiert?
Du solltest eigentlich nach meinem Hinweis oben den Stick in dem Screen unmounten, speichern, und neu starten.
Grüßle
Ralf
--------------------------------------------
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----




Bild
alexon
Member
Member
Beiträge: 30
Registriert: 15 Apr 2013 15:22
Hat Dank erhalten: 5 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#143

Beitrag von alexon »

Papi2000 hat geschrieben: 05 Feb 2025 18:23 Ich habe die Box nicht.
Hast du das aktuelle Image etwa auf den Stick als Flasherweiterung installiert?
Du solltest eigentlich nach meinem Hinweis oben den Stick in dem Screen unmounten, speichern, und neu starten.
Nein keine Flasherweiterung. Habe ich probiert, entmountet und USB Stick gezogen. Neustart und es bleibt beim Startlogo hängen… und jetzt das seltsame, während es beim Startlogo hängt (gute 10min gewartet) stecke ich ein USB Stick ein (egal welchen USB Stick, auch wenn dieser komplett leer ist) und zack wird der Bootvorgang fortgeführt, ohne das ich die Box komplett ausschalten muss. So als ob die Box auf den Stick wartet.
satfee
Senior member
Senior member
Beiträge: 1488
Registriert: 06 Mai 2013 12:28
Hat gedankt: 259 Mal
Hat Dank erhalten: 57 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#144

Beitrag von satfee »

Welche Dateien sind denn nach dem Bootvorgang am Stick? Läuft die Box dann ohne Stick weiter? Sieht so aus, als wenn das Image irgendwas auf USB schreiben will
GigaBlue UE 4k Metrix Skin
28° - 23.5° - 19° - 13° - 9° - 4.8° - 0.8°W - 4°W
alexon
Member
Member
Beiträge: 30
Registriert: 15 Apr 2013 15:22
Hat Dank erhalten: 5 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#145

Beitrag von alexon »

Hab Bootlog erstellt und die Stelle markiert wo der Bootvorgang abbricht und wartet... und ja kann den Stick dann direkt wieder abziehen und die Box läuft weiter.

Code: Alles auswählen

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2025.02.05 20:43:06 =~=~=~=~=~=~=~=~=~=~=~=
CPU 01
BCM74390012
PRID07252112
v1.23
RR:00000003
BFW
seclib-1.10
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 10002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 302b2500
MEMSYS-ALT
SHMOO 02010000 BLD:11138 HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000397(919)
 temperature=0000d502(54530)
 PV=00000350(848)
 MV=00000390(912)
AVS FW rev=30323478 [0.2.4.x]
OK
DDR0: !@ ffe0e780 <= ffe0d880 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0d880 MEMSYS-1 @ f1180000 OK
Sdram Scramble OTP = 0x00000001 
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 2025252b
BFW load mode OTP = 0x0000000f 
bfw_hash_locked = 0x00000000 
BFW key3 OK, BFW load OK
BFW v4.1.5
INFO v00000001
COPY CODE... DONE
MICH: disable success
SSBL
SEC: jtag debug status: 000000af
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  0705e0d8
_ebss  0705ea58
_end   0705ea78
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 0705e0d8 to 0705ea58 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/    
  ,'/___, BOLT v1.23 2431 LOCAL BUILD
.'__  ,'  (2024-08-05 14:21:06 build-server@build-server)
   /,'    Copyright (C) 2024 Broadcom
  /'      

Board: gbquad4kpro
SYS_CTRL: product=72521, family=7439b2, strap=000000b2, 
otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000) 
otp @ 0xf0404034 = 0x00000021: moca2_disable(0x00000001) rfm_disable(0x00000020) 
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 23 possible causes)
CS0: SFDP SPI, 4MB, 64kB blocks, 64kB erase block, 256B pages
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 2
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 @ 1200MHz
SPLASH: starting
Loaded BMP: W=720 H=576
SPLASH: audio not present
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.921V, T=+56.478C, PV=0.848V, MV=0.912V, FW=30323478 [0.2.4.x]
LCD: ILI9327
USB otp=00000040
AUTOBOOT [waitusb -t=3 -d='USB Disk' && batch usbdisk0:sysinit.txt]

usb: resetting device on bus 1 hub 1 port 1

USB: New high speed device connected to bus 1 hub 1 port 1

usb: resetting device on bus 1 hub 2 port 2

USB: New high speed device connected to bus 1 hub 2 port 2
usb: no driver found for a69c:8d80
USB device matching <USB Disk> not found!
USB device matching <USB Disk> not found!
SPLASH: starting
Loaded BMP: W=720 H=576
SPLASH: audio not present
*** STARTUP_1: File found
.
.
Loader:raw Filesys:fat Dev:emmcflash0.boot File:STARTUP_1 Options:(null)
Loading: .
 229 bytes read
Reading 5041392 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7624000)

32 bit direct boot...
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.20-1.9 (openATV@www.opena.tv) (gcc version 14.2.0 (GCC) ) #1 SMP Mon Dec 30 12:31:19 UTC 2024
[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: gbquad4kpro
[    0.000000] moving dtb from 0x0000000007624000 to 0x0000000000a0fc58
[    0.000000] bmem: Reserved 529 MiB at 0x000000001eb00000
[    0.000000] bmem: Reserved 608 MiB at 0x000000009a000000
[    0.000000] cma: Reserved 16 MiB at 0x0000000098c00000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 12 pages/cpu @dd1ab000 s17164 r8192 d23796 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523324
[    0.000000] Kernel command line: root=/dev/mmcblk0p13 rootsubdir=linuxrootfs1 kernel=/dev/mmcblk0p4 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 889016K/2097152K available (7115K kernel code, 349K rwdata, 2248K rodata, 328K init, 215K bss, 1191752K reserved, 16384K cma-reserved, 422904K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff000000   ( 520 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde300000   ( 483 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc092d36c   (9365 kB)
[    0.000000]       .init : 0xc092e000 - 0xc0980000   ( 328 kB)
[    0.000000]       .data : 0xc0980000 - 0xc09d74b8   ( 350 kB)
[    0.000000]        .bss : 0xc09da000 - 0xc0a0fc58   ( 216 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde802000, parent irq: 93)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde808000, parent irq: 64)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80aa00, parent irq: 65)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80c640, parent irq: 95)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80e200, parent irq: 58)
[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xde810380, parent IRQ(s): 3)
[    0.000000] MCP: Enabling write pairing
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[    0.000011] Switching to timer-based delay loop, resolution 37ns
[    0.000339] Console: colour dummy device 80x30
[    0.000358] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000366] pid_max: default: 32768 minimum: 301
[    0.000455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000896] CPU: Testing write buffer coherency: ok
[    0.001106] CPU0: update cpu_capacity 1024
[    0.001112] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001306] Setting up static identity map for 0x8480 - 0x84d8
[    0.004214] CPU1: update cpu_capacity 1024
[    0.004218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004265] Brought up 2 CPUs
[    0.004276] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[    0.004280] CPU: All CPU(s) started in SVC mode.
[    0.004609] devtmpfs: initialized
[    0.013789] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[    0.014019] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.015388] NET: Registered protocol family 16
[    0.015994] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.022156] cpuidle: using governor ladder
[    0.031163] cpuidle: using governor menu
[    0.038160] No ATAGs?
[    0.038189] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.038196] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.038413] Broadcom Brahma-B15 readahead cache at: 0xde954478
[    0.054775] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
[    0.054989] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
[    0.055376] SCSI subsystem initialized
[    0.056157] usbcore: registered new interface driver usbfs
[    0.056200] usbcore: registered new interface driver hub
[    0.056237] usbcore: registered new device driver usb
[    0.056307] Linux video capture interface: v2.00
[    0.056382] pps_core: LinuxPPS API ver. 1 registered
[    0.056386] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.056406] PTP clock support registered
[    0.056819] Advanced Linux Sound Architecture Driver Initialized.
[    0.057189] Bluetooth: Core ver 2.20
[    0.057225] NET: Registered protocol family 31
[    0.057229] Bluetooth: HCI device and connection manager initialized
[    0.057242] Bluetooth: HCI socket layer initialized
[    0.057249] Bluetooth: L2CAP socket layer initialized
[    0.057271] Bluetooth: SCO socket layer initialized
[    0.057812] Switched to clocksource arch_sys_counter
[    0.058007] FS-Cache: Loaded
[    0.064677] thermal thermal_zone0: failed to read out thermal zone (-22)
[    0.064825] NET: Registered protocol family 2
[    0.065209] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.065232] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.065270] TCP: Hash tables configured (established 4096 bind 4096)
[    0.065308] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.065319] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.065420] NET: Registered protocol family 1
[    0.065689] RPC: Registered named UNIX socket transport module.
[    0.065694] RPC: Registered udp transport module.
[    0.065697] RPC: Registered tcp transport module.
[    0.065700] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.066579] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[    0.066609] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.067385] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.068730] NFS: Registering the id_resolver key type
[    0.068753] Key type id_resolver registered
[    0.068757] Key type id_legacy registered
[    0.068795] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.068804] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.068964] FS-Cache: Netfs 'cifs' registered for caching
[    0.069009] Key type cifs.spnego registered
[    0.069137] fuse init (API version 7.23)
[    0.070089] bounce: pool size: 64 pages
[    0.070125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.070135] io scheduler noop registered
[    0.070141] io scheduler deadline registered
[    0.070153] io scheduler cfq registered (default)
[    0.070380] brcm-gisb-arb f0400000.gisb-arb: registered mem: de97c000, irqs: 261, 262
[    0.071220] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
[    0.071595] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
[    0.171784] brcm-pci f0460000.pcie: link down
[    0.171834] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
[    0.272005] brcm-pci f0490000.pcie: link down
[    0.273319] brcmstb_memc f1102000.memc-ddr: registered
[    0.273358] brcmstb_memc f1182000.memc-ddr: registered
[    0.273542] brcm-waketimer f0417580.waketimer: registered, with irq 263
[    0.273749] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.274899] console [ttyS0] disabled
[    0.274929] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
[    1.045757] console [ttyS0] enabled
[    1.049610] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
[    1.058918] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
[    1.071230] loop: module loaded
[    1.075273] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
[    1.082689] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
[    1.088731] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[    1.106797] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.115784] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
[    1.125308] scsi host0: brcm-ahci
[    1.128886] scsi host1: brcm-ahci
[    1.132368] ata1: FORCE: PHY spd limit set to 3.0Gbps
[    1.137433] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
[    1.145362] ata2: FORCE: PHY spd limit set to 3.0Gbps
[    1.150424] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
[    1.158359] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[    1.165475] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
[    1.171118] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
[    1.177154] brcmstb_qspi: probe of f03e3400.spi failed with error -22
[    1.183629] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
[    1.189762] m25p80 spi32766.0: found p25q32h, expected m25p80
[    1.195535] m25p80 spi32766.0: p25q32h (2048 Kbytes)
[    1.200546] 5 ofpart partitions found on MTD device spi32766.0
[    1.206401] Creating 5 MTD partitions on "spi32766.0":
[    1.211558] 0x000000000000-0x000000100000 : "flash0.bolt"
[    1.217511] 0x000000100000-0x000000110000 : "flash0.macadr"
[    1.223544] 0x000000110000-0x000000120000 : "flash0.nvram"
[    1.229488] 0x000000120000-0x000000130000 : "flash0.devtree"
[    1.235597] 0x000000000000-0x000000400000 : "flash0"
[    1.240580] mtd: partition "flash0" extends beyond the end of device "spi32766.0" -- size truncated to 0x200000
[    1.251720] libphy: Fixed MDIO Bus: probed
[    1.256247] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[    1.262142] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
[    1.281790] libphy: bcmgenet MII bus: probed
[    1.306598] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.312450] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.318588] xhci-brcm: xHCI BRCM driver
[    1.337280] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[    1.343069] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[    1.351136] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
[    1.360042] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
[    1.366675] hub 1-0:1.0: USB hub found
[    1.370462] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.377731] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[    1.383493] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[    1.391391] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.399859] hub 2-0:1.0: USB hub found
[    1.403640] hub 2-0:1.0: 2 ports detected
[    1.408033] ehci-brcm: EHCI BRCM driver
[    1.411990] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[    1.417763] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[    1.430789] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[    1.435737] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
[    1.440793] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.441219] hub 3-0:1.0: USB hub found
[    1.441241] hub 3-0:1.0: 1 port detected
[    1.441488] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[    1.441590] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[    1.451697] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
[    1.457784] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.458219] hub 4-0:1.0: USB hub found
[    1.458255] hub 4-0:1.0: 1 port detected
[    1.458583] ohci-brcm: OHCI BRCM driver
[    1.458671] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[    1.458819] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
[    1.458888] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
[    1.513277] hub 5-0:1.0: USB hub found
[    1.513315] hub 5-0:1.0: 1 port detected
[    1.513568] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[    1.513674] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[    1.513765] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
[    1.542229] ata1.00: ATA-10: SanDisk SSD PLUS 1000GB, UH4504RL, max UDMA/133
[    1.549298] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.561439] ata1.00: configured for UDMA/133
[    1.563228] hub 6-0:1.0: USB hub found
[    1.563267] hub 6-0:1.0: 1 port detected
[    1.563587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.563606] ehci-pci: EHCI PCI platform driver
[    1.563659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.563668] ohci-pci: OHCI PCI platform driver
[    1.563816] usbcore: registered new interface driver usb-storage
[    1.564008] mousedev: PS/2 mouse device common for all mice
[    1.564382] i2c /dev entries driver
[    1.564976] IR NEC protocol handler initialized
[    1.564980] IR RC5(x/sz) protocol handler initialized
[    1.564984] IR RC6 protocol handler initialized
[    1.564988] IR JVC protocol handler initialized
[    1.564991] IR Sony protocol handler initialized
[    1.564994] IR SANYO protocol handler initialized
[    1.564997] IR Sharp protocol handler initialized
[    1.565001] IR MCE Keyboard/mouse protocol handler initialized
[    1.565005] IR XMP protocol handler initialized
[    1.565747] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    1.565906] usbcore: registered new interface driver btusb
[    1.566398] brcmstb-cpufreq f03e257c.cpu-clk-div: registered
[    1.566609] sdhci: Secure Digital Host Controller Interface driver
[    1.566610] sdhci: Copyright(c) Pierre Ossman
[    1.566615] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.567957] sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
[    1.567960] sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
[    1.598786] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
[    1.600959] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
[    1.600962] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
[    1.630788] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[    1.630955] hidraw: raw HID events driver (C) Jiri Kosina
[    1.631334] usbcore: registered new interface driver usbhid
[    1.631336] usbhid: USB HID core driver
[    1.631862] Initializing XFRM netlink socket
[    1.640223] NET: Registered protocol family 10
[    1.644988] NET: Registered protocol family 17
[    1.645008] NET: Registered protocol family 15
[    1.645160] Key type dns_resolver registered
[    1.645217] Registering SWP/SWPB emulation handler
[    1.651260] ALSA device list:
[    1.651262]   No soundcards found.
[    1.718095] usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm
[    1.758790] usb 4-1: new high-speed USB device number 2 using ehci-brcm
[    1.771683] hub 2-2:1.0: USB hub found
[    1.773619] hub 2-2:1.0: 4 ports detected
[    1.819487] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD PLUS 04RL PQ: 0 ANSI: 5
[    1.829160] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.836948] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.837087] sd 0:0:0:0: [sda] Write Protect is off
[    1.837138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.842331]  sda: sda1
[    1.842970] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.848800] mmc1: MAN_BKOPS_EN bit is not set
[    1.873285] mmc1: new high speed MMC card at address 0001
[    1.878920] mmcblk0: mmc1:0001 8GME4R 7.28 GiB 
[    1.883552] mmcblk0boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
[    1.889562] mmcblk0boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
[    1.898439] hub 4-1:1.0: USB hub found
[    1.902476] hub 4-1:1.0: 4 ports detected
[    1.906570]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
[    1.979794] ata2: SATA link down (SStatus 0 SControl 320)
[    1.986953] Freeing unused kernel memory: 328K (c092e000 - c0980000)
[    2.213793] usb 4-1.2: new high-speed USB device number 3 using ehci-brcm
[    2.233036] EXT4-fs (mmcblk0p13): recovery complete
[    2.238448] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)

INIT: version 3.04 booting
Starting fake hwclock: loading system time.
Wed Feb  5 18:47:27 UTC 2025
[    2.539600] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.847372] EXT4-fs (sda1): recovery complete
[    2.851777] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.882359] Adding 8188k swap on /dev/mmcblk0p10.  Priority:-1 extents:1 across:8188k SS
[    2.949125] [aicwf_usb_probe] DEBUG_ENABLE off 
[    2.953690] [aicwf_usb_probe] FACTORY_ENABLE off 
[    2.959015] chip_id=f307, chip_mcu_id = 0
[    2.964185] addr_adid 0x201940, addr_patch 0x1e0000
[    3.059813] usbcore: registered new interface driver aic_load_fw
[    3.098256] usbcore: registered new interface driver aic8800_fdrv
[    3.162485] SGI XFS with security attributes, realtime, no debug enabled
[    3.194987] EXT4-fs (mmcblk0p13): re-mounted. Opts: data=ordered
[    3.245766] usb 4-1.2: USB disconnect, device number 3
[    3.251201] aicwf_bus_deinitgrep: /sys/devices/platform/Fixed: No such file or directory
grep: MDIO: No such file or directory
grep: bus.0/modalias: No such file or directory
Starting udev

[    3.627911] udevd[982]: starting version 3.2.14
[    3.633709] random: udevd urandom read with 88 bits of entropy available
[    3.704964] udevd[999]: starting eudev-3.2.14
[    3.754064] q_sz/max:  0 /  8 - next tkn: 482
[    3.758471] q_sz/max:  0 /  8 - next tkn: 482
[    3.780561] exit aicwf_bus_deinit
[    3.979847] usb 4-1.2: new high-speed USB device number 4 using ehci-brcm
[    4.099075] [aicwf_usb_probe] DEBUG_ENABLE off 
[    4.103681] [aicwf_usb_probe] FACTORY_ENABLE off 
[    4.108459] aic_load_fw: probe of 4-1.2:1.0 failed with error -1
[    4.190389] [aicwf_usb_probe] DEBUG_ENABLE off 
[    4.195005] [aicwf_usb_probe] FACTORY_ENABLE off 
[    4.199799] aic_load_fw: probe of 4-1.2:1.1 failed with error -1
[    4.317649] [aicwf_usb_probe] DEBUG_ENABLE off 
[    4.322245] [aicwf_usb_probe] FACTORY_ENABLE off 
[    4.327033] aic_load_fw: probe of 4-1.2:1.2 failed with error -1
[    5.344268] rwnx_reg_notifier Enter
[    5.348314] ieee80211 phy0: 
[    5.348314] *******************************************************
[    5.348314] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES **
[    5.348314] *******************************************************
[    5.392826] usbcore: registered new interface driver aic_btusb


An dieser Stelle bleibt die Box hängen, bis ein USB Stick eingesteckt wird!
Sobald ein USB Stick eingesteckt wird wird der Bootvorgang fortgesetzt:


[   50.795790] usb 4-1.4: new high-speed USB device number 5 using ehci-brcm
[   50.904854] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[   50.911596] scsi host2: usb-storage 4-1.4:1.0
[   51.918178] scsi 2:0:0:0: Direct-Access     UT163    USB Flash Disk   0.00 PQ: 0 ANSI: 2
[   51.927117] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   51.928243] sd 2:0:0:0: [sdb] 512000 512-byte logical blocks: (262 MB/250 MiB)
[   51.929361] sd 2:0:0:0: [sdb] Write Protect is off
[   51.930359] sd 2:0:0:0: [sdb] Asking for cache data failed
[   51.930363] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   52.013373] random: nonblocking pool is initialized
[   52.020113]  sdb:
[   52.029131] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   52.101488] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
ALSA: Restoring mixer settings...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
net.ipv4.tcp_timestamps = 0
Starting gigablue-platform-util...[   53.692468] nexus: module license 'Proprietary' taints kernel.
[   53.698343] Disabling lock debugging due to kernel taint
[   53.723328] nexus driver initialized
[   53.782811] nexus.ko: virtual irq: enabled (273)
[   53.787541] nexus.ko: shared gpio banks: enablednxserver is running.

[   55.847008] version: 20241203095620-u171
[   55.992315] LCD: ILI9327
[   56.182197] input: gigablue remote control as /devices/virtual/input/input0
[   56.190902] DVB: registering new adapter (_gigablue_)
[   56.293271] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.302095] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.311597] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.320049] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.328471] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.336885] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.345316] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
[   56.353727] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
displaySettingsChanged
gigablue-platform-util is startedStarting stb hwclock: loading system time.
Wed Feb  5 18:48:23 UTC 2025
Stopping chronyd: start-stop-daemon: warning: killing process 2598: No such process
done
Starting chronyd: done

INIT: Entering runlevel: 3
Starting Dropbear SSH server: Configuring network interfaces... Starting chronyd: Mounting remote filesystems...
Starting rpcbind daemon...done
dropbear.
Fuse filesystem already available.
Starting system message bus: Mounting fuse control filesystem.
starting 8 nfsd kernel threads: done.
dbus.
RTNETLINK answers: File exists
wpa_supplicant v2.11
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.wlan0.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.wlan0.conf' -> '/etc/wpa_supplicant.wlan0.conf'
Reading configuration file '/etc/wpa_supplicant.wlan0.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
fast_reauth=1
ap_scan=1
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=2):
     61 62                                             ab              
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=14): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='ab'
nl80211: Kernel version: Linux 4.1.20-1.9 (#1 SMP Mon Dec 30 12:31:19 UTC 2024; armv7l)
nl80211: Maximum supported attribute ID: 221
nl80211: Initialize interface wlan0 (driver: usb)
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-14-72:1
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5632
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5633
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5123
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4105
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4110
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5121
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4106
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5126
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5124
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5120
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5125
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5133
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=6144
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=6
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=6
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: key_mgmt=0xd0f enc=0x10f auth=0x7 flags=0x800001b5437bc0 flags2=0x100 rrm_flags=0x0 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=500 max_scan_ssids=3
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x22a568
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0104 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=040a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=040b multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=040c multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=040d multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=090a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=090b multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=090c multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=090d multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0409506f9a09 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=7f506f9a09 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0409506f9a1a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0801 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=06 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0a07 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0a11 multicast=0
done
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0a0b multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0a1a multicast=0
starting mountd: nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=1101 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=1102 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0505 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=0500 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=1301 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=1305 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x22a568 match=7e506f9a1a multicast=0
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlan0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2380-2520 @ 40 MHz 20 mBm
nl80211: 5140-5980 @ 80 MHz 20 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
starting statd: Starting internet superserver: inetdStarting PCSC Daemon: pcscdStarting bluetooth: Starting automount: Starting syslogd/klogd: Starting telnet server: telnetdStarting crond:  * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Activating share definitions
* starting FTP Server: vsftpd... * starting Bluetooth Audio ALSA Backend: bluealsa... wlan0: Own MAC address: bc:2b:02:f3:27:a2
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
   broadcast key
wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
   broadcast key
wlan0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlan0: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlan0: WPS: UUID based on MAC address: c5ba7b73-7392-5911-843f-0ef7e03d6d41
Running local boot scripts (/etc/rc.local)ENGINE: Loading builtin engines
grep: /etc/samba/shares/*.conf: No such file or directory
ENGINE: Loading builtin engines
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Starting Softcam service oscam-stable: .
Using existing control interface directory.
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
.
nl80211: Create interface iftype 10 (P2P_DEVICE)
nl80211: New P2P Device interface p2p-dev-wlan0 (0x2) created
Initializing interface 'p2p-dev-wlan0' conf '/etc/wpa_supplicant.wlan0.conf' driver 'nl80211' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.wlan0.conf' -> '/etc/wpa_supplicant.wlan0.conf'
Reading configuration file '/etc/wpa_supplicant.wlan0.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
fast_reauth=1
ap_scan=1
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=2):
     61 62                                             ab              
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=14): [REMOVED]
.
rm: can't remove '/etc/samba/shares/*.conf': No such file or directory
Starting Samba: smbd.
Process 2760 died: No such process; trying to remove PID file. (/run/avahi-daemon//pid)
done.
done.
OK
done
done
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=1 ssid='ab'
bluetoothd.
done
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-14-72:1
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5632
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5633
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5123
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4105
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4110
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5121
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4106
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5126
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5124
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5120
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5125
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=5133
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=6144
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=6
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=6
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: key_mgmt=0xd0f enc=0x10f auth=0x7 flags=0x800001b5437bc0 flags2=0x100 rrm_flags=0x0 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=500 max_scan_ssids=3
nl80211: interface p2p-dev-wlan0 in phy phy0
nl80211: Set mode ifindex 0 iftype 10 (P2P_DEVICE)
nl80211: Failed to set interface 0 to mode 10: -22 (Invalid argument)
nl80211: Subscribe to mgmt frames with non-AP handle 0x25aab0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0104 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=040a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=040b multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=040c multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=040d multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=090a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=090b multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=090c multicast=0
killall: showiframe: no process killed
OK
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=090d multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0409506f9a09 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=7f506f9a09 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0409506f9a1a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0801 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=06 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0a07 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0a11 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0a0b multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0a1a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=1101 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=1102 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0505 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=0500 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=1301 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=1305 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x25aab0 match=7e506f9a1a multicast=0
nl80211: Use (wlan0) to initialize P2P Device rfkill
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Start P2P Device p2p-dev-wlan0 (0x2): Success
Add interface p2p-dev-wlan0 to existing radio phy0
nl80211: Regulatory information - country=00
nl80211: 2380-2520 @ 40 MHz 20 mBm
nl80211: 5140-5980 @ 80 MHz 20 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
nl80211: Mode IEEE 802.11a: 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
p2p-dev-wlan0: Own MAC address: bc:2b:02:f3:27:a3
p2p-dev-wlan0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
p2p-dev-wlan0: State: DISCONNECTED -> INACTIVE
p2p-dev-wlan0: WPS: UUID from the first interface: c5ba7b73-7392-5911-843f-0ef7e03d6d41
ENGINE: Loading builtin engines
   ...done.
ENGINE: Loading builtin engines
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Using existing control interface directory.
P2P: Add operating class 81
P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
P2P: Add operating class 115
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 116
P2P: Channels - hexdump(len=2): 24 2c
P2P: Add operating class 117
P2P: Channels - hexdump(len=2): 28 30
P2P: Add operating class 124
P2P: Channels - hexdump(len=4): 95 99 9d a1
P2P: Add operating class 125
P2P: Channels - hexdump(len=5): 95 99 9d a1 a5
P2P: Add operating class 126
P2P: Channels - hexdump(len=2): 95 9d
P2P: Add operating class 127
P2P: Channels - hexdump(len=2): 99 a1
P2P: Add operating class 128
P2P: Channels - hexdump(len=8): 24 28 2c 30 95 99 9d a1
P2P: Add operating class 130
P2P: Channels - hexdump(len=25): 24 28 2c 30 34 38 3c 40 64 68 6c 70 74 78 7c 80 84 88 8c 90 95 99 9d a1 a5
P2P: Own listen channel: 81:1
P2P: Random operating channel: 81:11
P2P: initialized
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 115:36,40,44,48 116:36,44 117:40,48 124:149,153,157,161 125:149,153,157,161,165 126:149,157 127:153,161 128:36,40,44,48,149,153,157,161 130:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165
P2P: cli_channels:
p2p-dev-wlan0: Added interface p2p-dev-wlan0
p2p-dev-wlan0: State: INACTIVE -> DISCONNECTED
nl80211: Set p2p-dev-wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=0 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
p2p-dev-wlan0: Determining shared radio frequencies (max len 3)
p2p-dev-wlan0: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
P2P: Add operating class 115
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 116
P2P: Channels - hexdump(len=2): 24 2c
P2P: Add operating class 117
P2P: Channels - hexdump(len=2): 28 30
P2P: Add operating class 124
P2P: Channels - hexdump(len=4): 95 99 9d a1
P2P: Add operating class 125
P2P: Channels - hexdump(len=5): 95 99 9d a1 a5
P2P: Add operating class 126
P2P: Channels - hexdump(len=2): 95 9d
P2P: Add operating class 127
P2P: Channels - hexdump(len=2): 99 a1
P2P: Add operating class 128
P2P: Channels - hexdump(len=8): 24 28 2c 30 95 99 9d a1
P2P: Add operating class 130
P2P: Channels - hexdump(len=25): 24 28 2c 30 34 38 3c 40 64 68 6c 70 74 78 7c 80 84 88 8c 90 95 99 9d a1 a5
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 115:36,40,44,48 116:36,44 117:40,48 124:149,153,157,161 125:149,153,157,161,165 126:149,157 127:153,161 128:36,40,44,48,149,153,157,161 130:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165
P2P: cli_channels:
Daemonize..
RTNETLINK answers: File exists
 wsdd.
RTNETLINK answers: File exists
done.
Starting Shell In A Box server: shellinabox.
displaySettingsChanged
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
net.ipv4.tcp_timestamps = 0
20:44:24.9407 [Enigma] Python path is '/usr/lib/enigma2/python'.
20:44:24.9409 [Enigma] DVB API version 5, DVB API version minor 12.
20:44:24.9409 [Enigma] Enigma debug level 3.
20:44:24.9409 [Enigma] sourcedate 2025-02-04 / master 34012+ec80526.
enigma2 is the main pvr application... adjust oom score!
displaySettingsChanged
displaySettingsChanged
STB does not support to show clock in Deep Standby
20:44:42.4970 [eDVBPESReader] Created. Opening demux
20:44:42.4972 [eDVBPESReader] Created. Opening demux
STB does not support to show clock in Deep Standby
Bild
alexon
Member
Member
Beiträge: 30
Registriert: 15 Apr 2013 15:22
Hat Dank erhalten: 5 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#146

Beitrag von alexon »

Ein paar Sachen die ich bereits probiert habe, aber immer das gleiche Symptom haben:

- Online Flashen komplett ohne Festplatte
- erneut vom USB Image vom 6.2 und ohne Festplatte
- verschiedene USB Sticks von 256MB bis 32GB

Erreichen konnte ich nur, das zwar der USB Stick nicht mehr beim Booten eingesteckt sein muss, aber die Box bleibt an der genannten Stelle ca. 12min hängen bis die weiter bootet. Sprich ein Neustart der gute 13-15 min dauert 😅

Gibt es eine Möglichkeit die Box komplett zu reseten?
Was ist dieser Slot 'R‘ eMMC: Wiederherstellung?
zuchnet
Member
Member
Beiträge: 32
Registriert: 31 Dez 2016 12:00
Hat Dank erhalten: 3 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#147

Beitrag von zuchnet »

Hi
I'am useing this model with a lot of cam's some of them has problem with decoding with high bitrate.
It is possible to fix it ?

Regards :good2:
Dateianhänge
Gigablue.jpg
mellie.w
Senior member
Senior member
Beiträge: 1392
Registriert: 21 Okt 2015 07:00
Wohnort: Demmin
Receiver 1: GigaBlue UHD Quad 4K Pro 7.5
Receiver 2: GigaBlue UHD Quad 4K 7.5
Hat gedankt: 1057 Mal
Hat Dank erhalten: 219 Mal
Geschlecht:

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#148

Beitrag von mellie.w »

@Captain
Die Ampel wird nicht angezeigt wenn man die Software aktualisiert.
Das gleiche beim OpenATV Status keine Ampel wird angezeigt.
Die Bluetooth Fernbedienung funktioniert nicht mehr richtig.
Macht immer zwei Sprünge statt einen und verliert die Verbindung.
Gruß
mellie.w
satfee
Senior member
Senior member
Beiträge: 1488
Registriert: 06 Mai 2013 12:28
Hat gedankt: 259 Mal
Hat Dank erhalten: 57 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#149

Beitrag von satfee »

mellie.w hat geschrieben:@Captain
Die Ampel wird nicht angezeigt wenn man die Software aktualisiert.
Das gleiche beim OpenATV Status keine Ampel wird angezeigt.
Die Bluetooth Fernbedienung funktioniert nicht mehr richtig.
Macht immer zwei Sprünge statt einen und verliert die Verbindung.
Gruß
mellie.w
Ist bekannt. Zurück auf 7.4, oder BT abstellen.
Ampel leuchtet nur wenn Internet vorhanden
GigaBlue UE 4k Metrix Skin
28° - 23.5° - 19° - 13° - 9° - 4.8° - 0.8°W - 4°W
mellie.w
Senior member
Senior member
Beiträge: 1392
Registriert: 21 Okt 2015 07:00
Wohnort: Demmin
Receiver 1: GigaBlue UHD Quad 4K Pro 7.5
Receiver 2: GigaBlue UHD Quad 4K 7.5
Hat gedankt: 1057 Mal
Hat Dank erhalten: 219 Mal
Geschlecht:

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#150

Beitrag von mellie.w »

@satfee
Internet ist vorhanden und die Ampel wird nicht angezeigt.
satfee
Senior member
Senior member
Beiträge: 1488
Registriert: 06 Mai 2013 12:28
Hat gedankt: 259 Mal
Hat Dank erhalten: 57 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#151

Beitrag von satfee »

Das ist komisch. Ich hatte das auch, bis ich entdeckt habe das DNS auf 0.0.0.0 stand
GigaBlue UE 4k Metrix Skin
28° - 23.5° - 19° - 13° - 9° - 4.8° - 0.8°W - 4°W
mellie.w
Senior member
Senior member
Beiträge: 1392
Registriert: 21 Okt 2015 07:00
Wohnort: Demmin
Receiver 1: GigaBlue UHD Quad 4K Pro 7.5
Receiver 2: GigaBlue UHD Quad 4K 7.5
Hat gedankt: 1057 Mal
Hat Dank erhalten: 219 Mal
Geschlecht:

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#152

Beitrag von mellie.w »

@satfee
Wird die Ampel nun bei dir angezeigt oder nicht?
Und wo finde ich das DNS auf 0.0.0.0 stand?
Dateianhänge
1_0_19_EF74_3F9_1_C00000_0_0_0_20241223052000.jpg
1_0_19_EF74_3F9_1_C00000_0_0_0_20241223052000.jpg (17.27 KiB) 338 mal betrachtet
satfee
Senior member
Senior member
Beiträge: 1488
Registriert: 06 Mai 2013 12:28
Hat gedankt: 259 Mal
Hat Dank erhalten: 57 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#153

Beitrag von satfee »

Bitte sehr

BildBild
GigaBlue UE 4k Metrix Skin
28° - 23.5° - 19° - 13° - 9° - 4.8° - 0.8°W - 4°W
mellie.w
Senior member
Senior member
Beiträge: 1392
Registriert: 21 Okt 2015 07:00
Wohnort: Demmin
Receiver 1: GigaBlue UHD Quad 4K Pro 7.5
Receiver 2: GigaBlue UHD Quad 4K 7.5
Hat gedankt: 1057 Mal
Hat Dank erhalten: 219 Mal
Geschlecht:

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#154

Beitrag von mellie.w »

Danke schön und was hast bei DNS eingestellt?
Benutzeravatar
Anskar
VIP
VIP
Beiträge: 3539
Registriert: 19 Sep 2014 20:42
Wohnort: Thüringer
Receiver 1: 3 mal Mut@nt HD 51 UHD
Receiver 2: GB HD Quad Plus
Receiver 3: Octagon SF8008
Receiver 4: Octagon SF8008 SUPREME
Hat gedankt: 3494 Mal
Hat Dank erhalten: 938 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#155

Beitrag von Anskar »

Guten Abend!
Da es ja doch nun einige User gibt welche die Gigablue UHD Quad 4K Pro ihr Eigen nennen mal ne Frage bzw eine Bitte .
Könnt ihr in Slot 7 ein Image installieren bzw es mal probieren?
Bei mir gingen die verschiedensten Flashvarianten nicht, Testimage war das neue oatv 7.6.
Die Box ist nach Installation in Slot 7 nicht neu gestartet und immer hängen geblieben.
Mußte immer per "Rettungsloader " und anderen Slot dann wieder zum Leben erweckt werden.
Bitte keine Angst vorm testen, der "Rettungsloader" funktioniert immer wieder und biegt im Fall der Fälle alles wieder hin.
MfG
Benutzeravatar
Jogibär
VIP
VIP
Beiträge: 3237
Registriert: 01 Mai 2022 15:00
Receiver 1: GB ue4k
Receiver 2: slot1 HDF 7.5 (1gb)
Receiver 3: slot2 HDF 7.3 (1gb)
Receiver 4: slot3 ATV 7.5.1 (1gb)
Hat gedankt: 4474 Mal
Hat Dank erhalten: 1850 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#156

Beitrag von Jogibär »

Kurze Gegenfrage, wieviel platz hast du im 7. Slot und wie aufgepumpt ist dein image was du wieder herstellen wolltest?
Wer dich dazu bringt, Absurditäten zu glauben, bringt dich auch dazu, Ungeheuerlichkeiten zu tun.
Benutzeravatar
Anskar
VIP
VIP
Beiträge: 3539
Registriert: 19 Sep 2014 20:42
Wohnort: Thüringer
Receiver 1: 3 mal Mut@nt HD 51 UHD
Receiver 2: GB HD Quad Plus
Receiver 3: Octagon SF8008
Receiver 4: Octagon SF8008 SUPREME
Hat gedankt: 3494 Mal
Hat Dank erhalten: 938 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#157

Beitrag von Anskar »

Ich wollte das Image in Slot 7 nicht Wiederherstellen sondern erstmalig ein Image in Slot 7 installieren.
Papi2000 hatte bei uns im Chat auch die Vermutung das es eventuell am fehlenden Speicher liegen könnte.
Hatte ihm da diese 3 Screenshot gepostet und er meine das von 8 GB noch die Hälfte frei sei.
Hatte es per "Flashen mit Übernahme der Einstellungen und Plugins " versucht aber auch als jungfräuliche Installation.
Ging jedesmal nicht.
Dann im Slot 4 und es klappte auf Anhieb mit "Flashen mit Übernahme der Einstellungen und Plugins ".
MfG
Dateianhänge
1.jpg
2.jpg
3.jpg
satfee
Senior member
Senior member
Beiträge: 1488
Registriert: 06 Mai 2013 12:28
Hat gedankt: 259 Mal
Hat Dank erhalten: 57 Mal

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#158

Beitrag von satfee »

mellie.w hat geschrieben:Danke schön und was hast bei DNS eingestellt?
8.8.8.8
GigaBlue UE 4k Metrix Skin
28° - 23.5° - 19° - 13° - 9° - 4.8° - 0.8°W - 4°W
mellie.w
Senior member
Senior member
Beiträge: 1392
Registriert: 21 Okt 2015 07:00
Wohnort: Demmin
Receiver 1: GigaBlue UHD Quad 4K Pro 7.5
Receiver 2: GigaBlue UHD Quad 4K 7.5
Hat gedankt: 1057 Mal
Hat Dank erhalten: 219 Mal
Geschlecht:

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#159

Beitrag von mellie.w »

Kannst du bitte ein Screenshot machen?
Die Ampel wird nicht angezeigt.
mellie.w
Senior member
Senior member
Beiträge: 1392
Registriert: 21 Okt 2015 07:00
Wohnort: Demmin
Receiver 1: GigaBlue UHD Quad 4K Pro 7.5
Receiver 2: GigaBlue UHD Quad 4K 7.5
Hat gedankt: 1057 Mal
Hat Dank erhalten: 219 Mal
Geschlecht:

Re: Fehler/Bugs GigaBlue UHD Quad 4K Pro

#160

Beitrag von mellie.w »

Mit der Einstellung funktioniert es auf mein GigaBlue UHD Quad 4K, die Ampel wird angezeigt.
Beim GigaBlue UHD Quad 4K Pro wird die Ampel nicht angezeigt wenn man die Software aktualisiert.
Oder muss ich was in der Fritzbox ändern?
OpenATV Status und OpenATV Reader funktionieren also Internet ist vorhanden.
Bitte um Hilfe
Dateianhänge
1_0_19_283D_3FB_1_C00000_0_0_0_20250211084320.jpg
1_0_19_EF74_3F9_1_C00000_0_0_0_20250211082416.jpg
Zuletzt geändert von mellie.w am 11 Feb 2025 12:51, insgesamt 1-mal geändert.
Antworten

Zurück zu „GigaBlue UHD Quad 4K Pro“