[Info] Fehler/Probleme openATV 7.4

[Gio60]

There was some Updates and so it was not a good idea to make a Online Update because ATV 7.4 is a Beta Image.The better way would have been to flash the image online with the settings taken over, all you have to do now is flash it again using a USB stick and if you had saved your settings, import them again. If not, install a full backup of the image, I hope you created one.
If neither is the case, your only option is to redo everything.

[DelthaBuegel]

Anadol Multibox (ohne SE) heute online neu geflasht, mit Übernahme der Einstellungen - alles wider I.O.

Einziges Mango: Das Bootlogo - da schüttelt's Hund samt Hütte!
Gut das man das bei den HiSi-Boxen nicht so lange sieht.

[Gio60]

Schön zu hören......sobald das ATV 7.4 dann Release ist,wird die Option Online Update dann auch wieder Problemloser sein,weil dann die ganzen Neuerungen nicht mehr nicht mehr vorkommen,war nur die letzten Tage Extrem.

[medici84]

There was some Updates and so it was not a good idea to make a Online Update because ATV 7.4 is a Beta Image.The better way would have been to flash the image online with the settings taken over, all you have to do now is flash it again using a USB stick and if you had saved your settings, import them again. If not, install a full backup of the image, I hope you created one.
If neither is the case, your only option is to redo everything.

The problem is that the amiko viper 4k v30 cannot be flashed via USB.

[Gio60]

Are you shure?I have find this:
1) Power off the receiver 2) Ensure no other USB devices are plugged into the receiver while flashing. 3) Insert the USB stick containing the image files into one of the USB ports on the receiver, rear USB port is advised if possible. 4) Hold down the REAR RESET button.and then Power the receiver on.

[medici84]

Are you shure?I have find this:
1) Power off the receiver 2) Ensure no other USB devices are plugged into the receiver while flashing. 3) Insert the USB stick containing the image files into one of the USB ports on the receiver, rear USB port is advised if possible. 4) Hold down the REAR RESET button.and then Power the receiver on.

Can you tell me which files should be on the USB? What is the reset button on the remote?

[jorgo]

this is for the v40.
but I think that is the same way for your v30...

[medici84]

this is for the v40.
but I think that is the same way for your v30...

On this receiver, it cannot be done this way.

[jorgo]

ok....than the last try from me:

How to flash amiko viper 4k v30?
Copy the Amico folder to a FAT32 formatted USB Stick. Turn off Receiver. Plug it into a USB port on the receiver. Turn on the Receiver and press the green button on the remote control several times, until the word "UPDATE" appears on the decoder display and wait until the process is complete

[medici84]

ok....than the last try from me:

How to flash amiko viper 4k v30?
Copy the Amico folder to a FAT32 formatted USB Stick. Turn off Receiver. Plug it into a USB port on the receiver. Turn on the Receiver and press the green button on the remote control several times, until the word "UPDATE" appears on the decoder display and wait until the process is complete

Yes, I do everything like that. Updt appears on the receiver display. I press the green button. And that's the end. The receiver restarts again, and after that only the green light on the display is on.

[listener]

Schade, dass man die Entwicklung für 7.4 eingestellt haben.
für meine Arbeit ist das Linux zu fehlerhaft.
Das ist fuer mich ein problem mus bei 7.3 bleiben fuer entwikkeling.
Arbeite jetz an enigma2 (unter 7.3) um den Player universeller zu machen , damit man nicht immer ausweichen muss
auf einen externen Player , wenn enigma2 ihn nicht abspielen kann.

[paps1]

Katastrophe !!! The OATV Team in the "new" 7.4 beta has downgraded libc6 to 2.39+git0+273a835fe7-r0 and previously it was 2.39+git0+312e159626-r0. Due to this, many plugins cannot be installed!

[9000peter]

All wrong, I'm waiting for an update, still nothing.
Octagon sf4008.

https://www.opena.tv/viewtopic.php?p=562559#p562559

[listener]

Katastrophe !!! The OATV Team in the "new" 7.4 beta has downgraded libc6 to 2.39+git0+273a835fe7-r0 and previously it was 2.39+git0+312e159626-r0. Due to this, many plugins cannot be installed!

Good news that they are stil working on it.
A upgrade is not always better as the older version

Gute nachrichten das da noch an gearbeitet wird.
Ein upgrade ist nicht immer besser

[paps1]

Good news that they are stil working on it.
A upgrade is not always better as the older version

Gute nachrichten das da noch an gearbeitet wird.
Ein upgrade ist nicht immer besser

That's why I test the latest updates on Vu+ Zero4K in Multiboot :-)

[Boostracerking]

OK der Server hat fast alles neu gebaut.
Nur bei dei der Box pulse4kmini hat er Probleme.

[Gio60]

Richtig,wenn es da keine Besserung gibt,muss sich das @Captain anschauen,sollte kein Problem sein.

[jorgo]

Jungs,Abwarten....[emoji6]

Gesendet von meinem SM-A156B mit Tapatalk

[Boostracerking]

Jup der Server hat alle Images neu gebaut.

Eigentlich wurde schon die Entwicklung in Version 7.3 gestoppt da wird nichts mehr kommen. Releases . openatv/enigma2 . GitHub
GitHub - openatv/enigma2 at 7.3

[Anskar]

Das ist erstmal Quatsch, Mut@nt HD51 zum Beispiel oatv 7.4 gebaut am 15.05.24, und da läuft einiges nicht Rund.
Heute ist aber der 18.05.24.
Zum Beispiel Oscam.