Bluetooth Fernbedienung Probleme

Nachricht

WolfgangWue · #1

Wie üblich wurde die Kopplung mit der Bluetooth-Verbindung nach dem heutigen Up-Date getrennt. Wie üblich wollte ich die Verbindung neu koppeln. Trotz einstündig dauernden Versuchen scheiterte ich kläglich. Die Box zeigte zwar verbunden an. Aber das Bluetooth funktionierte nicht.
Die ganze Verbindung ist wohl softwareseitig wohl noch nicht ausgegoren.

CloudCologne · #2

Also Üblich ist das nicht, dass die BT Verbindung nach Update neu erstellt werden muss, außer du hast komplett neu geflasht.

Hast du das BT mal abgeschaltet, dann die Box Mal komplett neugestartet und dann versucht das BT einzuschalten und die FB verbunden?

WolfgangWue · #3

Ich habe eine gute Stunde lang jede Menge ausprobiert. Unter anderem auch deinen Vorschlag. Im Moment habe ich die Schnauze voll und arbeite mit Infrarot, auch wenn ich damit aus einigen Zimmerecken Verrenkungen machen muss, weil aus den Richtungen halt Hindernisse vor dem Sensor der Box stehen. Mal sehen wenn ich wieder Lust habe etwas zu tun.

cim1bom · #4

Hi
Habe das gleiche Problem
Gigablue Trio 4k Pro
Die FB findet die Bluetooth Plugin wenn dann Verbindung versucht wird kommt Zahnrad nach ne Zeit Crash Blue Screen

Ich hatte es heute hinbekommen das sie gekoppelt war und musste Neu flashen weil Ton nicht mehr ging dachte hab was umgestellt Neu flashen lieber bevor ich noch mehr Verstelle.

Nach neu Flash leider kriege ich die Bluetooth Kopelung mit der FB nicht mehr hin

Info und OK Taste gedrückt halten ca.3 sec auf der FB koppelungs Modus auf die Bluetooth Plugin wird sie auch angezeigt aber wenn Verbindung klicke oder auf OK wie oben beschrieben Zahnrad Crash oder Warnung Software Problem

MamaLeone · #5

Box mal für ein paar Minuten komplett vom Strom trennen

cim1bom · #6

Danke für denn Tip 👍
Manchmal sind die einfachsten Sachen die Lösung 🫣

Strom weg 2-3 min Box Hoch gefahren Bluetooth Plugin gestartet RCU FB erkannt Verbinden angeklickt wären Verbindungs Versuch Info und OK Taste gedrückt gehalten für 3sec. Meldung Verbunden 😉

leonlars · #7

Hallo,
kannst du mir bitte mitteilen wie du das hinbekommen hast, ich finde keine Möglichkeit bluetooth zu aktivieren und die Fernbedienung zu verbinden

WolfgangWue · #8

Keine Ahnung über die Ausstattung deiner Box. Kann diese und die FB überhaupt Bluetooth?

leonlars · #9

Ich habe eine VU+Duo4KSE die hat Bluetooth eingebaut und funktioniert eigentlich prima, nur mit der OpenATV leider nicht, habe keine Möglichkeit gefunden es zu aktivieren, die Fernbedienung ist auch von VU+ und funktioniert normalerweise auch über Bluetooth einwandfrei.

WolfgangWue · #10

Für die GIGABlue hat meines Wissens auch nur das OATV Image für die Trio 4 K pro die Möglichkeit für Blue tooth. Wenn das Image das vorsieht müsste auch ein Hinweis auf die Möglichkeit zu finden sein. Probiere mal eine andere Version von OATV 7.4 ? 7.3.? Wenn im Image nicht vorgesehen kann das auch nicht funktionieren.

Gelöschter Benutzer 153799 · #11

Bluetooth wurde in 7.4 raus genommen wegen baustop...

leonlars · #12

Habe ich bereits gemacht, auch auf der letzten Version 7.4 ist leider keine Bluetooth vorgesehen. Das ist wirklich schade, mir gefällt das OATV Image wirklich sehr gut, wenn diese Funktion implementiert würde wäre es perfekt. Ich hoffe es kommt noch.

Joerg1909 · #13

Bei mir suchte der Bluetooth Geräte Manger volle 5 Sekunden. Es wird nicht ein Gerät gefunden.
Die Suche lässt sich nicht mit der Taste Grün wiederholen.
Das Image ist nun 7.4 und aktuell.
Die Box wurde vom Strom genommen und neu gestartet Aber leider half das auch nicht.
Die Gigablue Fernbedienung ist in Ordnung und zeigt sich bei der Suche auch in Android Geräten.

Was mache ich falsch?

Das Logfile zeigt mir leider nichts in Sachen Bluetooth.
Im Terminal mit der Eingabe "enigna2" viel mir das auf:

Code: Alles auswählen

open: /dev/ttyBT0, fd, 3
init
sprd_vendor_hci_init
marlin3_init
vnd_load_configure Attempt to load conf from /etc/bluetooth/uwe5621//bt_configure_pskey.ini
hci_server_thread
hci_server_thread wati for btools
vnd_load_configure device_class ->  0x001F00
vnd_load_configure feature_set ->  0xBF, 0xFE, 0x8D, 0xFE, 0xDB, 0x3D, 0x7B, 0x87, 0xFF, 0xA7, 0xFF, 0x7F, 0x00, 0xE0, 0xF7, 0x3E
vnd_load_configure device_addr ->  0x6D, 0x6D, 0x8E, 0x8E, 0x8F, 0x8F
vnd_load_configure comp_id ->  0x01EC
vnd_load_configure g_sys_uart0_communication_supported ->  1
vnd_load_configure cp2_log_mode ->  1
vnd_load_configure LogLevel ->  0xFF
vnd_load_configure g_central_or_perpheral ->  0
vnd_load_configure Log_BitMask ->  0xFFFF
vnd_load_configure super_ssp_enable ->  0
vnd_load_configure common_rfu_b3 ->  2
vnd_load_configure common_rfu_w ->  0x00000000, 0x00000000
vnd_load_configure le_rfu_w ->  0x00000000, 0x000000000
vnd_load_configure lmp_rfu_w ->  0x00000000, 0x000000000
vnd_load_configure lc_rfu_w ->  0x00000000, 0x000000000
vnd_load_configure g_wbs_nv_117 ->  0x004D
vnd_load_configure g_wbs_nv_118 ->  0x0066
vnd_load_configure g_nbv_nv_117 ->  0x009B
vnd_load_configure g_nbv_nv_118 ->  0x0066
vnd_load_configure g_sys_sco_transmit_mode ->  0
vnd_load_configure audio_rfu_b1 ->  0
vnd_load_configure audio_rfu_b2 ->  0
vnd_load_configure audio_rfu_b3 ->  0
vnd_load_configure audio_rfu_w ->  0x00000000, 0x00000000
vnd_load_configure g_sys_sleep_in_standby_supported ->  1
vnd_load_configure g_sys_sleep_master_supported ->  1
vnd_load_configure g_sys_sleep_slave_supported ->  1
vnd_load_configure power_rfu_b1 ->  0
vnd_load_configure power_rfu_w ->  0x00000000, 0x00000000
vnd_load_configure win_ext ->  40
vnd_load_configure edr_tx_edr_delay ->  6
vnd_load_configure edr_rx_edr_delay ->  8
vnd_load_configure tx_delay ->  12
vnd_load_configure rx_delay ->  34
vnd_load_configure bb_rfu_w ->  0x00000000, 0x00000000
vnd_load_configure agc_mode ->  0
vnd_load_configure diff_or_eq ->  0xFF
vnd_load_configure ramp_mode ->  0
vnd_load_configure modem_rfu_b1 ->  0
vnd_load_configure modem_rfu_w ->  0x00000000, 0x00000000
vnd_load_configure BQB_BitMask_1 ->  0x00000000
vnd_load_configure BQB_BitMask_2 ->  0x00000000
vnd_load_configure bt_coex_threshold ->  0x04E2, 0x1F40, 0x0020, 0x00C8, 0x000A, 0x0000, 0x0000, 0x0000
vnd_load_configure other_rfu_w ->  0x00000000, 0x00000000
marlin3_init select /sys/devices/platform/mtty.0/
marlin3_init read chipid 0 int 0
marlin3_init read ant_num 251 int 251
vnd_load_configure Attempt to load conf from /etc/bluetooth/uwe5621//bt_configure_rf_invaild_251.ini
############ vnd_load_configure file >/etc/bluetooth/uwe5621//bt_configure_rf_invaild_251.ini< not found ##############
hciattach_sprd: /home/sky/work/hi3798/uwe5621/5621DS_linux_driver1/driver1/linux_sdk/hardware/aml-4.9/wifi/sprd/bluetooth/libbt/src/conf.c:485: vnd_load_configure: Assertion `0' failed.

Joerg1909 · #14

In einem aktuellen OpenATV 7.3 dauert die Bluetooth suche keine 5 Sekunden.
Über die Tage immer wieder clean geflasht.
Es werden keine Bluetooth Geräte gefunden.
Die Gigablue Fernbedienung ist ja in Ordnung und zeigt sich bei der Suche ja auch auf Android Geräten.

Dann ist die Box wohl defekt?

#15

Nö, denke nur Treibermüll, den Impex da bereitstellt. Oder das Image kann damit nicht umgehen. teamBlue7.3 mal in einem anderen Slot probiert?

Joerg1909 · #16

Ja ein TeamBlue 7.3 habe ich in einem anderen Slot installiert.
Leider genau das gleiche verhalten.

Zum Zeitpunkt als ich die Box gekauft habe, haben TeamBlue und OpenATV mit der Bluetooth Fernbedienung auch funktioniert.

Ältere Images wie openatv-7.2-gbtrio4kpro-20230531_mmc oder teamblue-7.3-gbtrio4kpro-20230724_mmc funktionieren leider auch nicht.

Was ich nun bemerkt habe ist das mir WLan garnicht mehr zur Verfügung steht als Netzwerkadapter.
Ich glaub da muß ich mal eine Wiederherstellung flashen und werde dann mal berichten.

Joerg1909 · #17

Ich habe jetzt Recovery Images (TeamBlue, OpenATV und HDF) geflashed.
Bluetooth geht nicht mehr,
WLan geht nicht mehr,
und die SD-Card Formatierung im Recovery funktioniert auch nicht.
Eine SD-Card wird aber im laufenden Betrieb gemounted und ist beschreibbar.
Ein anderes Netzteil mit 2,5A habe ich zum Test auch angeschlossen. Keine Besserung.
Kann ich noch etwas tun / testen um einen Hardware defekt auszuschliessen?
Ein Backup von dem ich mir sicher sein kann das WLan und Bluetooth funktionierte hab ich leider nicht mehr. Sonst wäre es ja zu einfach das dann mal zu testen denke ich.

Ein dmesg brachte folgende Info:

Code: Alles auswählen

Welcome to openATV for gbtrio4kpro
openatv 7.3 gbtrio4kpro


root@gbtrio4kpro:~# uname -a
Linux gbtrio4kpro 4.4.35 #1 SMP Mon Dec 24 06:39:12 UTC 2018 armv7l GNU/Linux
root@gbtrio4kpro:~# ifconfig
eth0      Link encap:Ethernet  HWaddr D0:27:29:0F:FE:9C
          inet addr:192.168.50.101 Bcast:0.0.0.0  Mask:255.255.255.0
          inet6 addr: fe82::d117:21ff:feaf:fe9c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:130655 errors:0 dropped:3726 overruns:0 frame:0
          TX packets:63691 errors:0 dropped:2 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:185614117 (177.0 MiB)  TX bytes:4396675 (4.1 MiB)
          Interrupt:32

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:102 errors:0 dropped:0 overruns:0 frame:0
          TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:12191 (11.9 KiB)  TX bytes:12191 (11.9 KiB)

root@gbtrio4kpro:~# dmesg
mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
 mmcblk0: p1(boot) p2(bootargs) p3(bootoptions) p4(baseparam) p5(pqparam) p6(logo) p7(deviceinfo) p8(softwareinfo) p9(loaderdb) p10(loader) p11(trustedcore) p12(linuxkernel1) p13(linuxkernel2) p14(linuxkernel3) p15(linuxkernel4) p16(userdata)
usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
usb 4-1: USB controller f98a0000.xhci does not support streams, which are required by the UAS driver.
usb 4-1: Please try an other USB controller if you wish to use UAS.
usb 4-1: USB controller f98a0000.xhci does not support streams, which are required by the UAS driver.
usb 4-1: Please try an other USB controller if you wish to use UAS.
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 4-1:1.0
f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
usbcore: registered new interface driver snd-usb-audio
oprofile: using timer interrupt.
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
ALSA device list:
  No soundcards found.
Freeing unused kernel memory: 596K (c0b65000 - c0bfa000)
This architecture does not have kernel memory protection.
EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
Load hi_media.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:28:35])
Load hi_mmz.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:28:35])
virtual device initialization.
Load hi_common.ko success.      (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jun 26 2018, 14:24:58])
Load hi_pq.ko success.          (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:28])
Load hi_cipher.ko success.      (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:22])
Load hi_hdmi.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 30 2019, 15:16:17])
hisi hdmi CEC Driver, (c) 2018 Define Technologies
scsi 0:0:0:0: Direct-Access     INTEL SS DSA2M160G2HP     3202 PQ: 0 ANSI: 6
print parent bus[usb], bus_id[4-1:1.0]
allocate index 0 for non sdcard, try again
print parent bus[usb], bus_id[4-1:1.0]
allocate index 1 for usb20, try again
print parent bus[usb], bus_id[4-1:1.0]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sdc] Write Protect is off
sd 0:0:0:0: [sdc] Mode Sense: 47 00 00 08
sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Load hi_vou.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jun 28 2018, 16:48:45])
Load hi_gpio.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:40])
Load hi_gpioi2c.ko success.     (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:14])
Load hi_i2c.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:15])
Load hi_tde.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:41])
Load hi_otp.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:23])
Load hi_demux.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 26 2018, 18:25:22])
Load hi_adec.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:29:59])
Load hi_vfmw.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:53])
 sdc: sdc1 sdc2
sd 0:0:0:0: [sdc] Attached SCSI disk
Load hi_vpss.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:32:27])
Load hi_vdec.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:44])
Load hi_adsp.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:00])
hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
Load hi_aiao.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 14 2018, 10:00:23])
Load hi_pvr.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:38])
Load hi_tuner.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Nov  7 2022, 12:17:07])
Load hi_keyled.ko success.      (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 14 2018, 10:01:39])
virtual DVB adapter driver, version 1.4, (c) 2010-12 Honza Petrous, SmartImp.cz
vtunerc: registered /dev/misc/vtuner0
vtunerc: registered /dev/misc/vtuner1
vtunerc: registered /dev/misc/vtuner2
hi_dvb: unknown parameter 'hi_vendor' ignored
hi_dvb: unknown parameter 'hi_device' ignored
phi
HI PCIE bridge driver, Copyright (C) 2005-2018 Micronas
DVB: registering new adapter (nHi)
[05:15:30:292 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
avl62x1 attach fail!
phi: avl62x1 attach failed!
random: nonblocking pool is initialized
The Chip ID is 0xE
avl62x1 attach success!
DVB: registering adapter 0 frontend 0 (AVL62X1)...
[hi_dvb_attach_tsport:742 dmx 0,port 32]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[05:15:30:757 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
avl62x1 attach fail!
phi: avl62x1 attach failed!
atbm781x2x3x_attach I2C(1) , ADDR: 128(0x80)
atbm781x2x3x attach success!
DVB: registering adapter 0 frontend 0 (ATBM7821 DVB-T2/C)...
[hi_dvb_attach_tsport:742 dmx 1,port 33]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[05:15:31:209 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
avl62x1 attach fail!
phi: avl62x1 attach failed!
[hi_dvb_attach_tsport:742 dmx 2,port 34]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[05:15:31:448 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
avl62x1 attach fail!
phi: avl62x1 attach failed!
[hi_dvb_attach_tsport:742 dmx 3,port 35]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
dvb video add event 17 - 7 0

[05:15:31:687 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
avl62x1 attach fail!
phi: avl62x1 attach failed!
No this tuner device
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
Load hi_fb.ko success.          (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Nov 17 2020, 17:37:22])
Mali: Mali device driver loaded
misc hi_dbe: hi_dbe ready
Load hi_jpegdec.ko success.     (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:17])
Load hi_jpegenc.ko success.     (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:17])
Load hi_png.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:26])
Load hi_advca.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:01])
Load hi_venc.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:48])
Load hi_aenc.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:04])
Load hi_sci.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 27 2019, 19:29:44])
Load hi_vi.ko success.          (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:55])
dvb video add event 17 - 7 0

Load hi_pmoc.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Sep  6 2019, 10:59:26])
Registered IR keymap rc-hi3798
input: dreambox advanced remote control as /devices/virtual/rc/rc0/input0
rc0: dreambox advanced remote control as /devices/virtual/rc/rc0
hisi KEYS Driver, (c) 2017 Define Technologies
input: Hisi Front Panel Button Controls as /devices/platform/hisi_keys/input/input1
hisi encoder Driver, (c) 2017 Define Technologies

**********************************************************
**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
**                                                      **
** trace_printk() being used. Allocating extra memory.  **
**                                                      **
** This means that this is a DEBUG kernel and it is     **
** unsafe for production use.                           **
**                                                      **
** If you see this message and you are not debugging    **
** the kernel, report this immediately to your vendor!  **
**                                                      **
**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
**********************************************************
WCN: marlin_init entry!
WCN: wcn config keep power on
WCN: wcn config bt wake host
sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:512
sdiohal err: sdio, BITS =32, PageSize =4096, order=6, 3
sdiohal:sdiohal_init ok
WCN: marlin_probe ok!
WCN: start_marlin [MARLIN_WIFI]
WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
WCN: the first power on start
sdiohal:sdiohal_scan_card
sdiohal:sdiohal_set_card_present enable:1
dvb video add event 17 - 7 0
dvb video add event 17 - 7 0
dvb video add event 17 - 7 0

card connected!
sdiohal err:wait scan card time out
WCN_ERR: wait SDIO rescan card time out
WCN_ERR: chip power on fail
sdiohal:sdiohal_runtime_put entry
sdiohal err:sdiohal_runtime_put line 1903 not have card
WCN_ERR: start_marlin[3928] Marlin Set Power Error
sprdwl:sprdwl_probe power on chipset failed
uwe5621_bt_tty_init
mtty_probe unisoc soc, continue
mtty_probe init device addr: 0xdbde15c0
rfkill_bluetooth_init
bluetooth_set_power: start_block=1
WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0
bluetooth_set_power: end_block=1
rfkill_bluetooth_init end
marlin_sdio_init
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm
Running on kernel 4.4.35 #1 SMP Mon Dec 24 06:39:12 UTC 2018 armv7l
WARNING: Running kernel does not match configured kernel headers the driver was built with!  The driver needs to be rebuilt with the correct kernel headers!
SGI XFS with ACLs, security attributes, realtime, no debug enabled
EXT4-fs (mmcblk0p16): re-mounted. Opts: data=ordered
FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[05:15:40:311 ERROR-HI_PM]:c51_GetWakeUpMode[1297]: wakeup mode err!
proc_vmpeg_0_dst_apply_write 1
[iframe_confirm:190] iframe confirm

video[0] ready to play
[iframe_finish:208] iframe finish

dvb video add event 17 - 7 0

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[iframe_confirm:190] iframe confirm

[iframe_finish:208] iframe finish

video[0] ready to play
[05:15:45:961 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 0 Failed
hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
dvb video add event 17 - 7 0

off
lnb power offoff
lnb power off
fun = avl62x1_init, line = 1307
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@avl62x1_diseqc_set_voltage OFF
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@avl62x1_diseqc_set_voltage OFF
off
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offproc_vmpeg_0_dst_apply_write 00000001

UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
yaffs: dev is 187695105 name is "mmcblk0p1" rw
yaffs: passed flags ""
yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
yaffs: yaffs: MTD device 1 either not valid or unavailable
yaffs: dev is 187695105 name is "mmcblk0p1" rw
yaffs: passed flags ""
yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
yaffs: yaffs: MTD device 1 either not valid or unavailable
tntfs info (device mmcblk0p1, pid 2315): ntfs_fill_super(): fail_safe is enabled.
proc_vmpeg_0_dst_apply_write 1
bestfit
proc_video_videomode_50hz_write [1080p50]
proc_video_videomode_60hz_write [1080p]
proc_video_videomode_24hz_write [1080p24]
bluetooth_set_power: start_block=0
WCN: start_marlin [MARLIN_BLUETOOTH]
WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 1
WCN: no module to power on, start to power on
sdiohal:sdiohal_scan_card
sdiohal:sdiohal_set_card_present enable:1
sdiohal err:wait scan card time out
WCN_ERR: wait SDIO rescan card time out
WCN_ERR: chip power on fail
sdiohal:sdiohal_runtime_put entry
sdiohal err:sdiohal_runtime_put line 1903 not have card
WCN_ERR: start_marlin[3928] Marlin Set Power Error
bluetooth_set_power: end_block=0
mtty_open probe is success!
bluetooth_set_power: start_block=0
WCN: start_marlin [MARLIN_BLUETOOTH]
WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 1
WCN: no module to power on, start to power on
sdiohal:sdiohal_scan_card
sdiohal:sdiohal_set_card_present enable:1
sdiohal err:wait scan card time out
WCN_ERR: wait SDIO rescan card time out
WCN_ERR: chip power on fail
sdiohal:sdiohal_runtime_put entry
sdiohal err:sdiohal_runtime_put line 1903 not have card
WCN_ERR: start_marlin[3928] Marlin Set Power Error
bluetooth_set_power: end_block=0
sdiohal err:sdiohal_readl xmit_cnt:32768 xmit_start:0,not have card
WCN_ERR: read marlin3E chip id fail, ret=-1
chipid_show: 0
sdiohal err:sdiohal_readl xmit_cnt:32768 xmit_start:0,not have card
WCN_ERR: read marlin3E chip id fail, ret=-1
WCN_ERR: WCN module have not open
WCN_ERR: get_board_ant_num fail!
ant_num_show: 251
mtty_close device success _close!
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@avl62x1_diseqc_set_voltage OFF
hi_dvb_set_source [dmx: 0, tuner: 0, isvtuner: 0]
[hi_dvb_attach_tsport:742 dmx 0,port 32]0 5 1 0 184
Adding 1048572k swap on /media/usb/swapfile.  Priority:-1 extents:26 across:37218300k
@avl62x1_diseqc_set_voltage 18V(HORIZONTAL)
send discq: E0 00 00 00 00 00, len:3
send discq: E0 00 03 00 00 00, len:3
send discq: E0 10 39 F0 00 00, len:4
@OPS diseqc tone = 1(22K-ON)

avl62x1_set_frontend [frequency:1944000,symbol_rate:22000000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
stream turn 0 0 0
status locked, take 412 ms
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
audio[0] ready to play
Enter DMX_OsiPcrChannelDetachSync 0 0
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
video[0] ready to play
Enter DMX_OsiPcrChannelDetachSync 0 0
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
audio[0] ready to play
[05:30:01:146 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 0 Failed
dvb video add event 1 - 0 0 720 576

dvb video add event 2 - 0 0 25 0
dvb video add event 17 - 7 0

press key [0x50af9a65] detective
release key [0x50af9a65] detective
Enter DMX_OsiPcrChannelDetachSync 0 0
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@avl62x1_diseqc_set_voltage OFF
press key [0x50af9a65] detective
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@avl62x1_diseqc_set_voltage OFF
hi_dvb_set_source [dmx: 0, tuner: 0, isvtuner: 0]
[hi_dvb_attach_tsport:742 dmx 0,port 32]0 5 1 0 184
@avl62x1_diseqc_set_voltage 18V(HORIZONTAL)
release key [0x50af9a65] detective
send discq: E0 00 00 00 00 00, len:3
send discq: E0 00 03 00 00 00, len:3
send discq: E0 10 39 F0 00 00, len:4
@OPS diseqc tone = 1(22K-ON)

avl62x1_set_frontend [frequency:1944000,symbol_rate:22000000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
stream turn 0 0 0
status locked, take 534 ms
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
audio[0] ready to play
Enter DMX_OsiPcrChannelDetachSync 0 0
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
video[0] ready to play
Enter DMX_OsiPcrChannelDetachSync 0 0
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
audio[0] ready to play
dvb video add event 17 - 7 0

dvb video add event 1 - 0 0 720 576
dvb video add event 2 - 0 0 25 0

press key [0x50af9867] detective
release key [0x50af9867] detective
press key [0x50af5ba4] detective
release key [0x50af5ba4] detective
hi_dvb_set_source [dmx: 0, tuner: 0, isvtuner: 0]
[hi_dvb_attach_tsport:742 dmx 0,port 32]0 5 1 0 184

avl62x1_set_frontend [frequency:1587000,symbol_rate:27500000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
stream turn 0 0 0
Enter DMX_OsiPcrChannelDetachSync 0 0
status locked, take 423 ms
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
audio[0] ready to play
Enter DMX_OsiPcrChannelDetachSync 0 0
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
video[0] ready to play
dvb video add event 1 - 0 0 720 576

dvb video add event 2 - 0 0 25 0
dvb video add event 17 - 7 0

off
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offoff
lnb power off
off
lnb power offoff
lnb power off
press key [0x50af0bf4] detective
proc_vmpeg_0_dst_apply_write 00000001

release key [0x50af0bf4] detective
press key [0x50af0df2] detective
release key [0x50af0df2] detective
press key [0x50af0df2] detective
release key [0x50af0df2] detective
press key [0x50af0cf3] detective
hi_dvb_set_source [dmx: 0, tuner: 0, isvtuner: 0]
[hi_dvb_attach_tsport:742 dmx 0,port 32]0 5 1 0 184
@avl62x1_diseqc_set_voltage 13V(VERTICAL)

avl62x1_set_frontend [frequency:1880000,symbol_rate:27500000,stream_id:0xffffffff,isdbt_sb_segment_idx:0x00000000 tsid 255 plscode 262143 pls_mode = 3]
Enter DMX_OsiPcrChannelDetachSync 0 0
stream turn 0 0 0
release key [0x50af0cf3] detective
proc_vmpeg_0_dst_apply_write 00000001

status locked, take 422 ms
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
audio[0] ready to play
Enter DMX_OsiPcrChannelDetachSync 0 0
DmxPcrAcquire 0 -1073060180
Enter DMX_OsiPcrChannelAttachSync 0 0 4325376
video[0] ready to play
dvb video add event 1 - 0 0 720 576

dvb video add event 2 - 0 0 25 0

root@gbtrio4kpro:~#