Hdmi-cec

Nachricht

pereira69 · #1

The volume on the tv with the HDMI CEC does not work with the (Advance on the volume buttons) configured, using the tv command or the Box does not respond when changing channels and increasing the volume, I had an Octagon SF8008 and everything worked out,
Thanks

jogibär · #2

then show us your settings.

pereira69 · #3

Image taken a few days ago, in the case of an octagon sf8008 where it worked well, in the current openatv 6.4 and 7.0 I have exactly the same settings and it doesn't work

jogibär · #4

try it again.

pereira69 · #5

Thanks for all the support, but I would really like to solve this situation, as I mentioned, I always used these definitions for the Octagon SF8008, but attention, this same problem happens in other images

Der Dateianhang Alemão.jpg existiert nicht mehr.

pereira69 · #6

Any news about this subject? One of the problems could not be a bad Keymap.xml ?

megatron · #7

The Pulse 4K box goes into standby mode when the TV goes into standby mode, but does not wake up when the TV wakes up.
Ultimo 4k wakes up with these settings.
This is my Pulse 4K HDMI-CEC configuration

megatron · #8

AV receiver unit does not wake up the receiver!!! Please fix the pulse 4k HDMI cec! Thanks!

megatron · #9

I have several receivers, they all wake up from standby. Pulse 4k won't wake up from standby.

megatron · #10

HDMI cec it does not wake up the receiver. Interestingly, only the pulse4k has this problem, the ultimo4k and the Viper 4K V40 wake it up without a problem. There could be a software problem here.

megatron · #11

megatron hat geschrieben:HDMI cec it does not wake up the receiver. Interestingly, only the pulse4k has this problem, the ultimo4k and the Viper 4K V40 wake it up without a problem. There could be a software problem here.

Code: Alles auswählen

Tx: 11:43:55  <Give System Audio Mode Stat>  7D                                                 [0x05]
Tx: 11:43:55  <Give System Audio Mode Stat>  7D                                                 [0x05]
Tx: 11:43:55  <Give System Audio Mode Stat>  7D                                                 [0x05]
Tx: 11:43:55  <Give System Audio Mode Stat>  7D                                                 [0x05]
Rx: 11:44:14  <Give OSD Name>             <  46 01 
Tx: 11:44:14  <Set OSD Name>              >  47 pulse4k                                         [0x05]
Rx: 11:44:14  <Give OSD Name>             <  46 00 
Tx: 11:44:14  <Set OSD Name>              >  47 pulse4k                                         [0x00]
Rx: 11:44:14  <Give OSD Name>             <  46 BE 
Tx: 11:44:14  <Set OSD Name>              >  47 pulse4k                                         [0x05]
Rx: 11:44:14  <System Audio Mode Status>  <  7E 01 
Rx: 11:44:14  <System Audio Mode Status>  <  7E 01 
Rx: 11:44:14  <System Audio Mode Status>  <  7E 01 
Rx: 11:44:14  <Give OSD Name>             <  46 01 
Tx: 11:44:14  <Set OSD Name>              >  47 pulse4k                                         [0x00]
Rx: 11:44:14  <System Audio Mode Status>  <  7E 01 
Rx: 11:44:25  <Set System Audio Mode>     <  72 01 
Rx: 11:44:25  <Set System Audio Mode>     <  72 01 
Rx: 11:44:26  <Set Stream Path>           <  86 11 
Rx: 11:44:26  <Active Source>             <  82 11 
Rx: 11:44:26  <Routing Information>       <  81 11 
Rx: 11:44:26  <Set Stream Path>           <  86 11 
Rx: 11:44:27  <Set Stream Path>           <  86 11 
Rx: 11:44:27  <Active Source>             <  82 11 
Rx: 11:44:28  <Set Stream Path>           <  86 11 
Rx: 11:44:28  <Active Source>             <  82 11 
Tx: 11:44:41  <Standby>                   >  36                                                 [0x00]
Tx: 11:44:41  <User Control Pressed>      >  44 6C                                              [0x05]
Tx: 11:44:41  <Standby>                   >  36                                                 [0x05]
Tx: 11:45:29  <Active Source>             >  82 12 00                                           [0x0F]
Tx: 11:45:29  <User Control Pressed>      >  44 6D                                              [0x05]
Tx: 11:45:29  <System Audio Mode Request> >  70 12 00                                           [0x05]
Rx: 11:45:29  <User Control Pressed>      <  44 6D 
Rx: 11:45:29  <User Control Pressed>      <  44 6D 
Rx: 11:45:29  <User Control Released>     <  45 6D 
Rx: 11:45:30  <Set System Audio Mode>     <  72 01 
Tx: 11:45:32  <Active Source>             >  82 12 00                                           [0x0F]
Tx: 11:45:32  <User Control Pressed>      >  44 6D                                              [0x05]
Tx: 11:45:32  <System Audio Mode Request> >  70 12 00                                           [0x05]
Rx: 11:45:32  <Set System Audio Mode>     <  72 01 
Rx: 11:45:45  <Give Physical Address>     <  83 00 
Tx: 11:45:45  <Report Physical Address>   >  84 12 00 04                                        [0x0F]
Rx: 11:45:45  <Give OSD Name>             <  46 00 
Tx: 11:45:45  <Set OSD Name>              >  47 pulse4k                                         [0x05]
Rx: 11:45:45  <Give OSD Name>             <  46 00 
Tx: 11:45:45  <Set OSD Name>              >  47 pulse4k                                         [0x00]
Rx: 11:48:25  <Set System Audio Mode>     <  72 01 
Rx: 11:48:25  <Set System Audio Mode>     <  72 01 
Rx: 11:48:25  <Set Stream Path>           <  86 11 
Rx: 11:48:25  <Routing Information>       <  81 11 
Rx: 11:48:26  <Set Stream Path>           <  86 11 
Rx: 11:48:26  <Active Source>             <  82 11 
Rx: 11:48:27  <Set Stream Path>           <  86 11 
Rx: 11:48:27  <Active Source>             <  82 11 
Tx: 11:48:39  <Standby>                   >  36                                                 [0x00]
Tx: 11:48:39  <User Control Pressed>      >  44 6C                                              [0x05]
Tx: 11:48:39  <Standby>                   >  36                                                 [0x05]
Tx: 11:50:18  <Active Source>             >  82 12 00                                           [0x0F]
Tx: 11:50:18  <User Control Pressed>      >  44 6D                                              [0x05]
Tx: 11:50:18  <System Audio Mode Request> >  70 12 00                                           [0x05]
Rx: 11:50:19  <Reporting Device Vendor ID><  87 00 
Rx: 11:50:19  <Set System Audio Mode>     <  72 01 
Rx: 11:50:19  <Give Physical Address>     <  83 01 
Tx: 11:50:19  <Report Physical Address>   >  84 12 00 04                                        [0x0F]
Rx: 11:50:19  <Set System Audio Mode>     <  72 01 
Rx: 11:50:19  <Give OSD Name>             <  46 01 
Tx: 11:50:19  <Set OSD Name>              >  47 pulse4k                                         [0x05]
Rx: 11:50:20  <Give OSD Name>             <  46 00 
Tx: 11:50:20  <Set OSD Name>              >  47 pulse4k                                         [0x00]
Tx: 11:50:21  <Active Source>             >  82 12 00                                           [0x0F]
Tx: 11:50:21  <User Control Pressed>      >  44 6D                                              [0x05]
Tx: 11:50:21  <System Audio Mode Request> >  70 12 00                                           [0x05]
Rx: 11:50:22  <Set System Audio Mode>     <  72 01

megatron · #12

Pulse 4K No CEC support after turn on TV from standby!!!

megatron · #13

Basically none of the settings in the HDMI-CEC Setup menu are working to wake the Pulse 4K

megatron · #14

Manufacturer's response.

Ask your client to test with Open PLi or Open BH images as well.
They will work properly because there are bugs in the Open ATV CEC and there are issues with fixing them."

I've tried pure2, Open PLi, Open BH, Openatv, Openspa with all of them, but I can't wake up the receiver from standby with any of the HDMI cec

megatron · #15

When the pulse 4k goes into standby mode, I don't see the HDMI CEC command on the TV!

megatron · #16

The Impulse 4k receiver cannot be woken from standby mode. I would be grateful if someone could help. Thanks!

Code: Alles auswählen

09:52:55.8217 +++ start logging +++ physical address: 1.2.0.0 - logical address: 4 - device type: <Playback 1>
09:52:55.8217 Tx: 09:52:55 <Give System Audio Mode Stat> 7D [0x05]
09:52:56.2503 [ ] timeout for check TV state!
09:52:56.2520 Rx: 09:52:56 <Give OSD Name> < 46 00
09:52:58.3061 Tx: 09:52:58 <Routing Information> > 81 12 00 [0x0F]
09:52:59.8290 Rx: 09:52:59 <Give OSD Name> < 46 00
09:52:59.8319 Tx: 09:52:59 <Give Device Power Status> > 8F [0x00]
09:52:59.8338 [ ] timeout for check TV state!
09:52:59.8372 Rx: 09:52:59 <Give OSD Name> < 46 B6
09:52:59.8385 Tx: 09:52:59 <Set OSD Name> > 47 pulse4k [0x05]
09:52:59.8397 Rx: 09:52:59 <Give OSD Name> < 46 A8
09:52:59.8406 Tx: 09:52:59 <Set OSD Name> > 47 pulse4k [0x05]
09:52:59.8416 Rx: 09:52:59 <System Audio Mode Status> < 7E 01
09:52:59.8421 [ ] volume forwarding to device 05 enabled
09:52:59.8428 Tx: 09:52:59 <Set OSD Name> > 47 pulse4k [0x00]
09:52:59.8440 Rx: 09:52:59 <Set Stream Path> < 86 12
09:52:59.8446 [ ] streaming path has changed... to our address: True
09:52:59.8456 Tx: 09:52:59 <Set OSD Name> > 47 pulse4k [0x00]
09:52:59.8480 Tx: 09:52:59 <Active Source> > 82 12 00 [0x0F]
09:53:01.3789 Rx: 09:53:01 <Report Power Status> < 90 00
09:53:12.5427 Rx: 09:53:12 <Set System Audio Mode> < 72 01
09:53:12.5434 [ ] volume forwarding to device 05 enabled
09:53:12.7652 Rx: 09:53:12 <Set System Audio Mode> < 72 01
09:53:12.7659 [ ] volume forwarding to device 05 enabled
09:53:12.9212 Rx: 09:53:12 <Set Stream Path> < 86 11
09:53:12.9220 [ ] streaming path has changed... to our address: False
09:53:12.9226 [ ] go into standby...
09:53:12.9525 [ ] Skip turning off TV
09:53:13.0306 Rx: 09:53:13 <Active Source> < 82 11
09:53:13.2616 Rx: 09:53:13 <Set Stream Path> < 86 11
09:53:13.3881 Rx: 09:53:13 <Routing Information> < 81 11
09:53:14.0756 Rx: 09:53:14 <Set Stream Path> < 86 11
09:53:14.1856 Rx: 09:53:14 <Active Source> < 82 11
09:57:09.2674 Tx: 09:57:09 <Image View On> > 04 [0x00]
09:57:09.2686 Tx: 09:57:09 <Active Source> > 82 12 00 [0x0F]
09:57:09.2696 Tx: 09:57:09 <User Control Pressed> > 44 6D [0x05]
09:57:09.2704 Tx: 09:57:09 <System Audio Mode Request> > 70 12 00 [0x05]
09:57:10.7222 Rx: 09:57:10 <Set Stream Path> < 86 11
09:57:10.7393 Rx: 09:57:10 <Active Source> < 82 11
09:57:10.7403 [ ] our receiver is active source: False
09:57:10.7412 Tx: 09:57:10 <Routing Information> > 81 12 00 [0x0F]
09:57:10.7425 Rx: 09:57:10 <User Control Pressed> < 44 6D
09:57:10.7621 Tx: 09:57:10 <Active Source> > 82 12 00 [0x0F]
09:57:10.7741 Rx: 09:57:10 <Set System Audio Mode> < 72 01
09:57:10.7841 [ ] volume forwarding to device 05 enabled
09:57:10.7890 Tx: 09:57:10 <Routing Information> > 81 12 00 [0x0F]
09:57:12.8944 Rx: 09:57:12 <Set Stream Path> < 86 00
09:57:12.8957 [ ] go into standby...
09:57:12.9267 [ ] Skip turning off TV
09:57:12.9632 Rx: 09:57:12 <Set System Audio Mode> < 72 00
09:57:12.9639 [ ] volume forwarding to device 00 enabled
09:57:14.9216 Rx: 09:57:14 <Give Physical Address> < 83 A9
09:57:14.9225 Tx: 09:57:14 <Report Physical Address> > 84 12 00 04 [0x0F]
09:59:58.1354 Tx: 09:59:58 <Image View On> > 04 [0x00]
09:59:58.1364 Tx: 09:59:58 <Active Source> > 82 12 00 [0x0F]
09:59:58.1373 Tx: 09:59:58 <User Control Pressed> > 44 6D [0x05]
09:59:58.1383 Tx: 09:59:58 <System Audio Mode Request> > 70 12 00 [0x05]
09:59:59.6470 Rx: 09:59:59 <Give Physical Address> < 83 00
09:59:59.6630 Tx: 09:59:59 <Report Physical Address> > 84 12 00 04 [0x0F]
09:59:59.6649 Rx: 09:59:59 <Give Physical Address> < 83 A8
09:59:59.6658 Tx: 09:59:59 <Report Physical Address> > 84 12 00 04 [0x0F]
09:59:59.6668 Rx: 09:59:59 <Give Physical Address> < 83 A8
09:59:59.6677 Tx: 09:59:59 <Report Physical Address> > 84 12 00 04 [0x0F]
09:59:59.6701 Rx: 09:59:59 <Give OSD Name> < 46 A8
09:59:59.6713 Tx: 09:59:59 <Set OSD Name> > 47 pulse4k [0x05]
09:59:59.6723 Rx: 09:59:59 <Give OSD Name> < 46 A8
09:59:59.6849 Tx: 09:59:59 <Set OSD Name> > 47 pulse4k [0x00]
09:59:59.7011 Rx: 09:59:59 <Set Stream Path> < 86 12
09:59:59.7022 [ ] streaming path has changed... to our address: True
09:59:59.7055 Tx: 09:59:59 <Active Source> > 82 12 00 [0x0F]
09:59:59.7441 Rx: 09:59:59 <Set System Audio Mode> < 72 01
09:59:59.7492 [ ] volume forwarding to device 05 enabled
09:59:59.8637 Rx: 09:59:59 <Set System Audio Mode> < 72 01
09:59:59.8642 [ ] volume forwarding to device 05 enabled
10:00:01.6819 Rx: 10:00:01 <Give OSD Name> < 46 00
10:00:01.8929 Tx: 10:00:01 <Set OSD Name> > 47 pulse4k [0x05]
10:00:01.8963 Rx: 10:00:01 <Give OSD Name> < 46 B6
10:00:01.9066 Tx: 10:00:01 <Set OSD Name> > 47 pulse4k [0x05]
10:00:01.9085 Rx: 10:00:01 <Give OSD Name> < 46 02
10:00:01.9093 Tx: 10:00:01 <Set OSD Name> > 47 pulse4k [0x05]
10:00:01.9106 Rx: 10:00:01 <Give OSD Name> < 46 02
10:00:01.9114 Tx: 10:00:01 <Set OSD Name> > 47 pulse4k [0x00]
10:00:01.9127 Rx: 10:00:01 <Give OSD Name> < 46 02
10:00:01.9136 Tx: 10:00:01 <Set OSD Name> > 47 pulse4k [0x00]
10:00:01.9153 Rx: 10:00:01 <Give OSD Name> < 46 02
10:00:01.9163 Tx: 10:00:01 <Set OSD Name> > 47 pulse4k [0x00]
10:00:03.5277 Tx: 10:00:03 <Routing Information> > 81 12 00 [0x0F]
10:00:06.5270 [ ] timeout for check TV state!
10:00:06.5286 Tx: 10:00:06 <Give Device Power Status> > 8F [0x00]
10:00:06.8470 Rx: 10:00:06 <Set Stream Path> < 86 12
10:00:06.8476 [ ] our receiver is active source: True
10:00:07.1877 Rx: 10:00:07 <Report Power Status> < 90 00
10:00:44.6196 Rx: 10:00:44 <Set System Audio Mode> < 72 01
10:00:44.6210 [ ] volume forwarding to device 05 enabled
10:00:44.8619 Rx: 10:00:44 <Set System Audio Mode> < 72 01
10:00:44.8627 [ ] volume forwarding to device 05 enabled
10:00:45.0273 Rx: 10:00:45 <Set Stream Path> < 86 11
10:00:45.0279 [ ] streaming path has changed... to our address: False
10:00:45.0285 [ ] go into standby...
10:00:45.0543 [ ] Skip turning off TV
10:00:45.1365 Rx: 10:00:45 <Active Source> < 82 11
10:00:45.3126 Rx: 10:00:45 <Routing Information> < 81 11
10:00:45.5039 Rx: 10:00:45 <Set Stream Path> < 86 11
10:00:46.2036 Rx: 10:00:46 <Set Stream Path> < 86 11
10:00:46.3136 Rx: 10:00:46 <Active Source> < 82 11

megatron · #17

In reverse, it receives the Pulse4K CEC command from the TV to wake up. Thank you very much in advance for the fix!

megatron · #18

The problem remains: the box doesn't see any incoming relevant CEC commands from the TV.

dr.badvibes · #19

Gilt das selbe für die Mini?
Habe mir die Box gerade eben bestellt und bin danach erst hier drüber gestolpert.
Wenn das nicht läuft geht sie direkt wieder zurück.

megatron · #20

I can't say that pulse mini has good kernel drivers and HDMI cec. But if you get it, write it.