Change HDMI address.

[Sexton]

I have two sf8008 that both show their HDMI CEC as 2.1.0.0. How do I change this address to perhaps end random connection? It's not in "enigma2/settings".

[s3n0]

Hi.

In the GUI configuration, this item is missing... it is not possible to change it with the help of RCU through the GUI . You have to change/add it manually to the "/etc/enigma2/settings" file. Even if you activate a fixed address with the help of the YELLOW button on the RCU, the option for manual change does not appear in the GUI/Enigma2.

1) Go to MENU -> Settings -> System -> HDMI-CEC -> and press the YELLOW button on RCU there (in the HDMI-CEC settings view)
2) Save these changes with GREEN button on RCU
3) Stop the Enigma2 (init 4 command via the terminal connection)
4) Then edit/add the entry as manually inside the file "/etc/enigma2/settings":

Code: Alles auswählen

config.hdmicec.fixed_physical_address=2.2.0.1

HdmiCec.py - python source code: https://github.com/openatv/enigma2/blob ... Cec.py#L38
5) And then start the Enigma2 again (init 3 command via the terminal connection)
6) To be sure, check in the HDMI-CEC Settings whether a fixed physical address is assigned

But... addresses should be assigned by the TV - via HDMI. You probably don't have all your devices connected via HDMI HUB and the TV can't see all your devices. That's probably why the same address is assigned to both of your sf8008 devices ? Theoretically, it should be possible to adjust the HDMI address in the TV configuration - for individual HDMI connectors.

More info about HDMI physical addressing: https://kwikwai.com/knowledge-base/the-hdmi-cec-bus/

[Sexton]

Thanks.
The two sf8008 are plugged into a Yamaha HTR-2067 AV amp which is connected to the ARC port of an LG smart TV. There seems to be a bit of chit chat between them when I wake the Sf8008 as the sound and picture come and go but often ending with the wrong box displayed.
I'll try your fix as soon as I can wrestle control from my wife.

[Papi2000]

Bei manchen Konfigurationen wird die physikalische Adresse reportet, bei manchen die logische. Welche gerade benutzt wird, kann man bestenfalls in den erweiterten HDMI-CEC Einstellungen sehen. Man kann eine reportete dann als fest bestätigen, aber nichts an der Adresse selbt eingeben, um sie zu ändern. Ändere doch mal im TV oder die AVR die Einstellung. Warum geht das wohl dort nicht?
Immer dran denken, daß HDMI-CEC kein von kommerziellen Geräten unterstützter Standard ist. Sonst würde das Logo und explizit "HDMI-CEC" auf den Geräten prangern. Nein, dort heißt das dann Smartlink oder sonst wie kunstvoll umschrieben...
Welchen Grund hat dein Änderungswunsch der Adresse? Du kannst die Adresse nicht vorgeben. Das wird nichts. Entweder sie wird erkannt, und geht, oder nicht, dann nicht. Bei dir scheint die logische Adresse Verwendung zu finden, weswegen beide dieselbe Adresse reporten, je nachdem, welces Gerät gerade läuft.