Openatv 6.4. - how to boot w/o channel

Antworten
Nachricht
Autor
jezykpl
Beginners
Beginners
Beiträge: 1
Registriert: 06 Aug 2022 00:53

Openatv 6.4. - how to boot w/o channel

#1

Beitrag von jezykpl »

Does anyone know how to setup openatv so that when decoder boots it awaits for channel indication ratther than it automatically switches to the last channel before switching off decoder ?
Benutzeravatar
RickX
Member
Member
Beiträge: 391
Registriert: 30 Mai 2022 10:02
Wohnort: NRW
Receiver 1: Nvidia Shield (waipu.tv)
Receiver 2: waipu.tv Stick
Receiver 3: Vu+ Uno 4K SE (VTI 15)
Hat gedankt: 167 Mal
Hat Dank erhalten: 187 Mal

#2

Beitrag von RickX »

Standard is to go back to the last channel you watched before shutdown.

The alternative is to configure a standard start channel.
In this case it will always go to this start channel after reboot.

There is no option to wait for a channel selection after reboot.

You can configure a channel as start channel, which you cant decode.
In this case it will go to the start channel and the screen stays black.
Antworten

Zurück zu „English Section“