4097 IPTV auto reconnect?

Nachricht
Autor
Willow5
Member
Member
Beiträge: 113
Registriert: 22 Okt 2018 00:02
Hat gedankt: 3 Mal

4097 IPTV auto reconnect?

#1

Beitrag von Willow5 »

I have set up all my streams to use the inbuilt 4097 player. The player itself works but the stream stops after a few seconds. I get a similar issue when using VLC player on my laptop but if I hit the loop button, the stream plays with short breaks in between. How do I get my DM800Se to perform a similar action as the stream never recovers once it freezes.

Thank you
Benutzeravatar
Papi2000
Super Moderator
Super Moderator
Beiträge: 25937
Registriert: 20 Apr 2013 20:09
Receiver 1: Viele GigaBlues
Receiver 2: DM und ZGemma
Receiver 3: bissl VU
Hat gedankt: 4497 Mal
Hat Dank erhalten: 8315 Mal

#2

Beitrag von Papi2000 »

If there are short breaks in the streamflow, they are recognized as end-of-transmission. There is no auto reconnect in the box-software.
As the breaks on your PC also happen, you must increase the stability of transmission.
Grüßle
Ralf
--------------------------------------------
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----




Bild
Willow5
Member
Member
Beiträge: 113
Registriert: 22 Okt 2018 00:02
Hat gedankt: 3 Mal

#3

Beitrag von Willow5 »

Thank you Ralf. Unfortunately I have no control over the transmission so is this topic dead or could I somehow route the the transmission into a local proxy server?
Benutzeravatar
Papi2000
Super Moderator
Super Moderator
Beiträge: 25937
Registriert: 20 Apr 2013 20:09
Receiver 1: Viele GigaBlues
Receiver 2: DM und ZGemma
Receiver 3: bissl VU
Hat gedankt: 4497 Mal
Hat Dank erhalten: 8315 Mal

#4

Beitrag von Papi2000 »

For every IPTV stream you must ensure a continous stream.
Grüßle
Ralf
--------------------------------------------
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----




Bild
Benutzeravatar
s3n0
Senior member
Senior member
Beiträge: 1583
Registriert: 02 Jan 2017 14:38
Receiver 1: Vu+ Zero 4K
Receiver 2: Vu+ Solo SE V2
Hat gedankt: 108 Mal
Hat Dank erhalten: 417 Mal
Kontaktdaten:

#5

Beitrag von s3n0 »

Hello.

It might be better to use the "serviceapp" plugin + "ffmpeg" + "exteplayer3" (also found on the OpenATV feed-server).

Code: Alles auswählen

opkg update
opkg install ffmpeg exteplayer3 enigma2-plugin-systemplugins-serviceapp
reboot

Open the configuration of the ServiceApp plugin and set everything you need. Then, instead of 4097, you will use 5001 or 5002 to play through exteplayer3. Maybe then it will play after a short interruption again.

If it is an MPEG-TS stream (which is probably not your case), you can also try streaming by using the internal eDVBDemux (service number 1 instead of 4097), and the stream interruption will not be interrupted (playback will continue after the connection is resumed).
astons2
Beginners
Beginners
Beiträge: 22
Registriert: 31 Mai 2017 15:29
Hat gedankt: 10 Mal
Hat Dank erhalten: 1 Mal

#6

Beitrag von astons2 »

In case of MPEG-TS stream we can use service number 1 instead of 4097, in small interruption of stream playback will continue after the stream is resumed but when connection is closed from IPTV server side you need to change the channel and go back in order to get picture again. That is because internal eDVBDemux don't have reconnect option implemented which is very old problem with these Linux box images. I saw on some Android boxes that they have auto reconnect option when IPTV stream is lost, but on Linux so far I did not find any image that supports auto reconnect.
Benutzeravatar
s3n0
Senior member
Senior member
Beiträge: 1583
Registriert: 02 Jan 2017 14:38
Receiver 1: Vu+ Zero 4K
Receiver 2: Vu+ Solo SE V2
Hat gedankt: 108 Mal
Hat Dank erhalten: 417 Mal
Kontaktdaten:

#7

Beitrag von s3n0 »

Would not UDPXY help you ? For MIPSEL boxes, UDPXY already exists for a long time. You can find the Udpxy on the Internet. Alternatively, download it from the OpenPLi feed and use it in OpenATV. Or, some WiFi routers include the UDPXY service too ^^.

udpxy
udpxy command man page | ManKier
How to autostart udpxy on Enigma 2? - Satnigmo.com
Benutzeravatar
dhwz
Beiträge: 2625
Registriert: 04 Nov 2013 12:11
Hat gedankt: 253 Mal
Hat Dank erhalten: 1408 Mal

#8

Beitrag von dhwz »

@astons2
DreamOS does

1:256:1....
4097:256:1....
astons2
Beginners
Beginners
Beiträge: 22
Registriert: 31 Mai 2017 15:29
Hat gedankt: 10 Mal
Hat Dank erhalten: 1 Mal

#9

Beitrag von astons2 »

@s3n0
Thanks for the idea, I tried udpxy but its not working. Problem is that udpxy works if link to remote server have just ip and port like this: 110.0.0.110:5000 or 110.0.0.110:5001. But if we have something like this 110.0.0.110:8080/live/channels/1111.ts or 110.0.0.110:8080/live/channels/2222.ts udpxy will not work. Udpxy will pass in request only 110.0.0.110:8080 without additional parameters.

Error which i got is:
setup_mcast_listener: bind: Cannot assign requested address
Sent HTTP response code=[500], reason=[Service error] to socket=[6] HTTP/1.1 500 Service error

@dhwz
Thanks for the info.
DreamOS suppose to be official firmware for Dreambox, right?
I had impression that they are not developing firmware's anymore.
Anyway, I do not have Dreambox.
Benutzeravatar
s3n0
Senior member
Senior member
Beiträge: 1583
Registriert: 02 Jan 2017 14:38
Receiver 1: Vu+ Zero 4K
Receiver 2: Vu+ Solo SE V2
Hat gedankt: 108 Mal
Hat Dank erhalten: 417 Mal
Kontaktdaten:

#10

Beitrag von s3n0 »

What about "serviceapp" plugin ? Did you test ?

Instead of 4097, you use the 5001 or 5002 service according to the ServiceApp configuration. You can play the stream via exteplayer3 for example. Maybe it will be better.
ian1095
Member
Member
Beiträge: 76
Registriert: 29 Jul 2015 10:05
Hat gedankt: 8 Mal
Hat Dank erhalten: 7 Mal

#11

Beitrag von ian1095 »

dhwz hat geschrieben:@astons2
DreamOS does.


Yes we know this, but who wants to buy a Dreambox these days ? This is a problem with all other images and boxes that has been around for years now and still not resolved.
The thing is, if DreamOS can resolve this for the Dreambox, why cant ATV for all other boxes ?

If you search the net you will find that this is the most frequently asked for fix of any.
100's of people are asking for this, but not a single attempt anywhere to address it by ATV, O-EA , OBH or even Pli Devs.

This fix has to be number 1 in the top 10 required Enigma2 fixes, but no ones interested anywhere.

By the way, using Serviceapp and Exteplayer3 makes no difference at all. It never has.

If someone could find a solution to this, they would be appreciated everywhere by 100's, perhaps even 1000's of Enigma2 users.
astons2
Beginners
Beginners
Beiträge: 22
Registriert: 31 Mai 2017 15:29
Hat gedankt: 10 Mal
Hat Dank erhalten: 1 Mal

#12

Beitrag von astons2 »

Problem with IPTV reconnect is present from beginning. Few years ago I did start topic on OpenPLi forum regarding this and I run into brick wall there. Main excuse which devs told me is that IPTV is illegal and they do not want to be involved. At this point as far I can tell all Linux boxes soon will be illegal. (card paring ad etc ...) But beside pay TV there are sill some free TV via satellite and also there are free IPTV channels. So its not very clear to me what is the real problem why IPTV can not be fixed to work normally on Linux boxes. Second excuse was that Linux boxes should only be used for satellite reception not for IPTV. Well, as far I can tell everything is working on our boxes except IPTV, its small multimedia box. That excuse is also confusing for me like the first one. All this was just a small part of our conversation there ....

Serviceapp ahhh, also on OpenPLi forum few years ago is reported that Serviceapp is not working very well with IPTV, if you press recording sort after in left upper corner spinner will come up and box will become frozen. Most complete, stable IPTV support on Linux boxes is to leave everything on default, everything will work except reconnecting if your IPTV connection get closed.

Also problem with live IPTV and recording stream still exists. If you want to record and watch same channel we need two streams to IPTV server which is totally insane. (One for live TV and one for recording) This is also reported few years ago on OpenPLi forum and here on openATV forum.

There is something about IPTV which keeps all devs from it, and I have no clue what that could be ...
ian1095
Member
Member
Beiträge: 76
Registriert: 29 Jul 2015 10:05
Hat gedankt: 8 Mal
Hat Dank erhalten: 7 Mal

#13

Beitrag von ian1095 »

My bet is because most of the Devs are from Countries that do not yet have hardware pairing of cards from the main provider of that Country, for example Sky Germany, so they still have fully working C/S and as a consequence they do not care.

Many however do not and have lost C/S to hardware pairing. It might be a different matter when all main providers introduce hardware pairing, and then like the rest of us, these Devs too will need IPTV to continue watching. You might then see the required fixes such as Auto Reconnect and 5002 recording. The latter is the easier fix I think, but the former is the most desired and requested Enigma2 fix ever. But as you say, both have fell on deaf ears for years now.
Benutzeravatar
betacentauri
Developer
Developer
Beiträge: 2359
Registriert: 15 Jun 2013 11:42
Hat gedankt: 152 Mal
Hat Dank erhalten: 1063 Mal

#14

Beitrag von betacentauri »

If it were a easy fix, it would already be done.
I don’t think it has something to do with pairing. If you have a good server and a good connection, you don’t need a reconnect.
hd51, vuduo4se,....
ian1095
Member
Member
Beiträge: 76
Registriert: 29 Jul 2015 10:05
Hat gedankt: 8 Mal
Hat Dank erhalten: 7 Mal

#15

Beitrag von ian1095 »

For the most part I'd tend to agree with you, the better ( often more expensive ) providers generally don't need it, however, you try watching a major sporting event on a Saturday and Sunday and even the best providers suffer from connection errors, requiring the E2 user to switch channels, then switch back again.

As I said earlier in this thread, if DreamOS can do it for the Dreambox, why cant everyone else ? I'm not saying it will be easy, but DreamOS have proven it to be possible.
Benutzeravatar
dhwz
Beiträge: 2625
Registriert: 04 Nov 2013 12:11
Hat gedankt: 253 Mal
Hat Dank erhalten: 1408 Mal

#16

Beitrag von dhwz »

How about just paying for your legal Paytv subscription?
ian1095
Member
Member
Beiträge: 76
Registriert: 29 Jul 2015 10:05
Hat gedankt: 8 Mal
Hat Dank erhalten: 7 Mal

#17

Beitrag von ian1095 »

I do.

But many myself included cannot use it in their Enigma2 box that's why.

Anyway is that really an answer when the thread is about IPTV auto reconnect ?
WTE
Business Member
Business Member
Beiträge: 2177
Registriert: 17 Jun 2013 11:47
Hat gedankt: 76 Mal
Hat Dank erhalten: 1020 Mal

#18

Beitrag von WTE »

dhwz hat geschrieben:@astons2
DreamOS does

1:256:1....
4097:256:1....


quite normal in Enigma2 so what should do DreamOS different?
1is TS
4097 is Mediaplayer

Enigma2 does as well on my box it autoreconnect but probably it depend on the stream your testing with. I just remove ethernet and place it back after buffers are run out. (Test nowadays mostly with H9combo)
!Deutsch ist nicht meine mutter sprache, so sprachfehler kann auftreten! :sad:

ZGemma H10Combo: TRANSCODING H265 - KODI - HBBTV - DVB-S2x - DVB-CT2 -PiP uHD
TOP3:
ZG H10Combo, [B][B][B][B][B][B][B]Mut@nt/AX HD51[/B][/B][/B][/B][/B][/B][/B][B][B][B][B][B][B], [B][B][B][B]Axas E4HD[/B][/B][/B][/B][/B][/B][/B][/B][/B]


[/B]
Benutzeravatar
dhwz
Beiträge: 2625
Registriert: 04 Nov 2013 12:11
Hat gedankt: 253 Mal
Hat Dank erhalten: 1408 Mal

#19

Beitrag von dhwz »

@WTE
No your box doesn NOT reconnect when GST stopped playback. OpenATV will not restart playback after your internet connection dropped.
And DreamOS is NOT Enigma2, there is a lot different.
twol
Member
Member
Beiträge: 232
Registriert: 26 Jun 2014 11:12
Hat gedankt: 22 Mal
Hat Dank erhalten: 57 Mal

#20

Beitrag von twol »

ian1095 hat geschrieben:For the most part I'd tend to agree with you, the better ( often more expensive ) providers generally don't need it, however, you try watching a major sporting event on a Saturday and Sunday and even the best providers suffer from connection errors, requiring the E2 user to switch channels, then switch back again.

As I said earlier in this thread, if DreamOS can do it for the Dreambox, why cant everyone else ? I'm not saying it will be easy, but DreamOS have proven it to be possible.


So the only issue with sustaining service at the weekend is down to reconnect?! Lets get realistic, it happens at the weekend for sports events (nothing to do with major) because of either blocking or usually the inability of providers to automatically modify server capability to handle the sudden change in workload - usually because that costs them money to increase their server capacity and they don‘t like that.
Gigablue Quad 4K plus Giga UE4k Tuner A (FBC -> Unicable gt-sat lnb 28.2E 4 tuners), Tuner B (FBC -> Gigablue unicable lnb 19.2 4 tuners)
Dreambox dm900
Vu+ Uno4kse
Octagon SF8008
Edision Osmio plus 4K
Zgemma H9, H92S, H9Combo
Multibox
Antworten

Zurück zu „English Section“