Updates killed my MEGASAT Force 1 Plus
-
- Beginners
- Beiträge: 6
- Registriert: 29 Aug 2015 23:56
- Hat gedankt: 1 Mal
- Hat Dank erhalten: 2 Mal
Updates killed my MEGASAT Force 1 Plus
Hello.
Two weeks ago I updated my MEGASAT Force 1 Plus via SSH but when restarted it got stuck on "Starting" on LCD screen. Now I don't have signal on HDMI nor AV. Already tried to reinstall the firmware via USB pen without success, it just keeps showing the "Starting" message on the LCD, it doesn't even detect the USB pen. I always used this USB pen to install firmwares.
I've always updated my firmware via SSH with the opkg update/upgrade commands without a problem. Very rarely I got problems, but even then I could always reinstall the firmware via USB pen.
This problem must have something to do with the release of the new 6.4 version, I was using the 6.3 version.
What else can I try to reinstall the firmware, since the USB pen method doesn't work?
My PC is Linux by the way, but I can use Windows if needed to recover this box.
Thanks in advance.
Two weeks ago I updated my MEGASAT Force 1 Plus via SSH but when restarted it got stuck on "Starting" on LCD screen. Now I don't have signal on HDMI nor AV. Already tried to reinstall the firmware via USB pen without success, it just keeps showing the "Starting" message on the LCD, it doesn't even detect the USB pen. I always used this USB pen to install firmwares.
I've always updated my firmware via SSH with the opkg update/upgrade commands without a problem. Very rarely I got problems, but even then I could always reinstall the firmware via USB pen.
This problem must have something to do with the release of the new 6.4 version, I was using the 6.3 version.
What else can I try to reinstall the firmware, since the USB pen method doesn't work?
My PC is Linux by the way, but I can use Windows if needed to recover this box.
Thanks in advance.
-
- Beginners
- Beiträge: 6
- Registriert: 29 Aug 2015 23:56
- Hat gedankt: 1 Mal
- Hat Dank erhalten: 2 Mal
Today more calmly I tried again with two different USB pens and multiple files:
[HTML]openatv-5.0-megaforce1plus-20150804_usb
openatv-5.1-megaforce1plus-20160326_usb
openatv-5.2-megaforce1plus-20160326_usb
openatv-5.3-megaforce1plus-20170329_usb
openatv-6.0-megaforce1plus-20171025_usb
openatv-6.1-megaforce1plus-20180825_usb
openatv-6.2-megaforce1plus-20190817_usb
openatv-6.4-megaforce1plus-20200801_usb[/HTML]
Same result: stuck on "Starting".
Is there any other method to upload the firmware? Via RS232?
Or is it time to throw it in the trash and get a new satellite receiver?
[HTML]openatv-5.0-megaforce1plus-20150804_usb
openatv-5.1-megaforce1plus-20160326_usb
openatv-5.2-megaforce1plus-20160326_usb
openatv-5.3-megaforce1plus-20170329_usb
openatv-6.0-megaforce1plus-20171025_usb
openatv-6.1-megaforce1plus-20180825_usb
openatv-6.2-megaforce1plus-20190817_usb
openatv-6.4-megaforce1plus-20200801_usb[/HTML]
Same result: stuck on "Starting".
Is there any other method to upload the firmware? Via RS232?
Or is it time to throw it in the trash and get a new satellite receiver?
- laptan
- Moderator
- Beiträge: 1811
- Registriert: 25 Aug 2013 19:46
- Wohnort: openATV
- Receiver 1: uniBOX HD 1 PLUS
- Receiver 2: VU+ Zero
- Receiver 3: AX Triplex
- Receiver 4: MEGASAT Force 1 Plus
- Receiver 5: OS Mio 4K +
- Hat gedankt: 1175 Mal
- Hat Dank erhalten: 569 Mal
Please see the HowTo for the USB flash for your Box:
https://www.opena.tv/viewtopic.php?p=160426#p160426
Please flash the box again and use a small file sized USB stick, max. 2 GB and please follow the HowTo.
Did this fix your problem?
https://www.opena.tv/viewtopic.php?p=160426#p160426
Please flash the box again and use a small file sized USB stick, max. 2 GB and please follow the HowTo.
Did this fix your problem?
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
Re: Updates killed my MEGASAT Force 1 Plus
Hello.
It's me BE-COOL (can't login).
Is there a way to recover this receiver with an UART device? The USB method doesn't work, no signal on HDMI and the LCD just says "starting".
Thanks!
It's me BE-COOL (can't login).
Is there a way to recover this receiver with an UART device? The USB method doesn't work, no signal on HDMI and the LCD just says "starting".
Thanks!
- Papi2000
- Super Moderator
- Beiträge: 26445
- Registriert: 20 Apr 2013 20:09
- Receiver 1: Viele GigaBlues
- Receiver 2: DM und ZGemma
- Receiver 3: bissl VU
- Hat gedankt: 4529 Mal
- Hat Dank erhalten: 8526 Mal
Re: Updates killed my MEGASAT Force 1 Plus
Versuche das Image
https://images.mynonpublic.com/openatv/ ... 29_usb.zip
auf einen FAT32 formatierten USB-Stick (möglichst klein und nicht GPT, sondern MBR) mit 7zip und Ordnerstruktur am PC zu entpacken, und den stick am PC abmelden, wie es sich gehört.
Den Stick steckst du dann als einzigen Datenträger an deine stromlose Box, und startest sie.
Anleitung zum Flashen:
viewtopic.php?t=17770
Wenn wieder keine Reaktion, einen anderen Stick - nicht Schnellformatiert - versuchen. Wenn das nicht geht, einen anderen Stick - nicht Schnellformatiert - versuchen.
https://images.mynonpublic.com/openatv/ ... 29_usb.zip
auf einen FAT32 formatierten USB-Stick (möglichst klein und nicht GPT, sondern MBR) mit 7zip und Ordnerstruktur am PC zu entpacken, und den stick am PC abmelden, wie es sich gehört.
Den Stick steckst du dann als einzigen Datenträger an deine stromlose Box, und startest sie.
Anleitung zum Flashen:
viewtopic.php?t=17770
Wenn wieder keine Reaktion, einen anderen Stick - nicht Schnellformatiert - versuchen. Wenn das nicht geht, einen anderen Stick - nicht Schnellformatiert - versuchen.
Zuletzt geändert von Papi2000 am 19 Jan 2025 16:40, insgesamt 1-mal geändert.
Grund: Typo, Ergänzungen
Grund: Typo, Ergänzungen
Re: Updates killed my MEGASAT Force 1 Plus
Already tried multiple USB pens, the USB method doesn't work anymore. It worked only before the box bricked.Papi2000 hat geschrieben: ↑19 Jan 2025 16:37 Versuche das Image
https://images.mynonpublic.com/openatv/ ... 29_usb.zip
auf einen FAT32 formatierten USB-Stick (möglichst klein und nicht GPT, sondern MBR) mit 7zip und Ordnerstruktur am PC zu entpacken, und den stick am PC abmelden, wie es sich gehört.
Den Stick steckst du dann als einzigen Datenträger an deine stromlose Box, und startest sie.
Anleitung zum Flashen:
viewtopic.php?t=17770
Wenn wieder keine Reaktion, einen anderen Stick - nicht Schnellformatiert - versuchen. Wenn das nicht geht, einen anderen Stick - nicht Schnellformatiert - versuchen.
Are there tools to use the RS232 or UART interfaces?