LCD4linux

[Mr.Servo]

And you really believe that this problem is caused by LCD4linux? I don't get a single error message here!

Disconnect your receiver from the power supply for 5 seconds, then plug the cable back in and the receiver will restart. If it doesn't work at all, please post the debug log here.

Please note: Here in the OpenATV-forum can't really assist with troubles on OpenPli-images...

Greetings.....Mr.Servo

[Mr.Servo]

Furthermore: Maybe it's time for you to try OpenATV 7.4? You can use a multiboot-slot, so you can return to your OpenPli in case

Regards.....Mr.Servo

[gintarasarm]

MrServo,
Can be that I’m having all sorts of problems related to the LCD4linux plugin because, let’s say, I have a KODI plugin that doesn’t work very well on our site,
Maybe some external plugins influence this very much, I don’t know
Now I re-installed OpenPli Develop 9.0 again, only without the KODI plugin until the LCD4linux plugin checked what and how
Danke

[gintarasarm]

MrServo,
Today I downloaded an updated L4L plugin from the feed OpenPli, it seems to work really well, but I just can’t configure it to show IPTV channels picons, maybe you can tell me how to do it?
Show Streams '4097; 5001...5003' in Mode: Stream is it ON
There are only two options:
1. Media
2. On
Thanks in advance everyone for your answer
Sincerely
Danke

[9000peter]

It works for me. oATV 7.5 lcd4l v5.0-r22test

[gintarasarm]

Thank you @9000peter for answer,
I want to ask where on L4L plugin Show Streams '4097; 5001...5003' in Mode per provider how much do you have options two or three becouse we have two options Media and ON no Auto, So maybe that’s why it doesn’t show picons for IPTV channels, I don’t know
Image OpenPli Develop 9.0

[gintarasarm]

Maybe all the problems are due to the fact that we have Python version 3.9.9 on OpenPli Develop 9.0

[9000peter]

média = Medes
auto = auto
zapnuté = switch ON

[gintarasarm]

On the L4L plugin Show Streams '4097; 5001...5003' in Mode we don't have option Auto, no Auto for OpenPli Develop 9.0
Maybe all the problems are due to the fact that we have Python version 3.9.9 on OpenPli Develop 9.0

[gintarasarm]

when I go to the plugin via OpenWebif I don’t see this option at all, here is a screenshot of course in Russian

Der Dateianhang 5002_0_1_D5B5_382F_4127_DDDD0000_0_0_0_20240816231153.jpg existiert nicht mehr.

[9000peter]

I'm running on oatv 7.5 py 3.12.4 Install oatv 7.4 in the box and you'll be out of trouble.OpenPLi is long past its zenith....

[gintarasarm]

I found But we have only two selections on Open kleed Media and enable everything

Der Dateianhang 5002_0_1_D5B5_382F_4127_DDDD0000_0_0_0_20240816231853.jpg existiert nicht mehr.

[gintarasarm]

Maybe you are even very right about Open ATV, but I even really like the image of OpenPli Develop 3.9.9 very much and the whole problem is that we have python 3.9.9
Danke

[gintarasarm]

Info about OpenPli Develop 9.0 Python 3.9.9 and need that @MrServo know about version Python 3.9.9 for OpenPli Develop 9.0

Der Dateianhang 5002_0_1_D5B5_382F_4127_DDDD0000_0_0_0_20240816232641.jpg existiert nicht mehr.

[9000peter]

MR,Servo problem in test version.
after installing the test version after switching off the box, the box can no longer be turned on, it stays stuck on the l4l, I attach the log I tested it for a friend from Russia
box does not respond to remote , remained drooping as in the picture

[gintarasarm]

9000peter ,
it’s very good that we found a common language, MrServo yesterday I spent 2 hours explaining that after I turn off the receiver with the remote control, I can’t turn it on but he either believed me or didn’t believe me. I don’t know, I almost looked like an idiot in front of him
Danke

[gintarasarm]

9000peter,
If it’s not difficult for you, try MrServo to explain the whole essence of this problem, first of all, start with the fact that OpenPli Develop 9.0 have Python 3.9.9. Something needs to be corrected here and the rest you know everything. I’m from Lithuania and I watch Russian channels, but picons is not displayed to me on IPTV channels you have the whole point there. I would like if it is possible that he would somehow fix this plugin so that these picons with IPTV channels would be displayed
I am very grateful to you and with great respect to you!

[9000peter]

That's the least right? We are here to help each other.L4L I have been using from the beginning and I like to participate in testing and development....I have a backup of plugin.py so in a minute I have everything in its original state....


I apologize that I did not know that I am from Lithuania and I am from Slovakia.

[gintarasarm]

I am very pleased to have a friend from Slovakia

[9000peter]

Similarly, I will see what Mr.Servo has to say.