3g/4g modem manager
-
- Member
- Beiträge: 77
- Registriert: 09 Jan 2023 18:36
- Hat gedankt: 2 Mal
- Hat Dank erhalten: 13 Mal
Mr.Servo hat geschrieben:No! A CRASHLOG ist not necessary because there is no crash. The DEBUGlog ist sufficient!
Best is:
1. delete all files in /home/root/logs
2. perform a GUI restart
3. start again plugin and try to connect.
4. attach the DEBUGLOG
Thank you very much!
see file here
- Dateianhänge
-
- DEBUGlog.txt
- (55.64 KiB) 25-mal heruntergeladen
-
- Member
- Beiträge: 77
- Registriert: 09 Jan 2023 18:36
- Hat gedankt: 2 Mal
- Hat Dank erhalten: 13 Mal
Mr.Servo hat geschrieben:Okay Thanks!
And then see file here...
As usual, copy it please in /usr/lib/enigma2/python/Plugins/SystemPlugins/3GModemManager and perform a GUI-Restart.
Good luck...& Regards......Mr.Servo
hello, now I checked another modem and switched the modem to modem only mode through at commander, the result also did not allow me to transfer the modem to default, also without results, but the vendor and prodid do not change the same numbers I connect another huawei 303 modem and the vendor does not change
- Mr.Servo
- Developer
- Beiträge: 2965
- Registriert: 10 Aug 2020 22:09
- Wohnort: Pfalz / Palatinate
- Receiver 1: GigaBlue UE 4K Cable (OpenATV 7.5.1)
- Receiver 2: Mut@nt HD51 4K Cable (OpenATV 7.6)
- Receiver 3: VU+ Uno 4K Cable (OpenATV 7.5.1)
- Hat gedankt: 2020 Mal
- Hat Dank erhalten: 2480 Mal
- Geschlecht:
Hi biolog,
basically, it does not matter what numerical values the IDs 'Vendor' and 'ProdID' have. That depends on the product. The only thing that matters is that OpenATV is able to handle the USB modem, right? And we see, that your hardware have been accepted by OpenATV!!! So far so good!
You have to exit the 3GModemManager before unplugging/plugging another USB modem and start it again after plugging in another USB modem. Best is to performe a GUI-restart!
I see that everything works fine until the point "4. Attempt to connect", but then you get an error message?
Please forward again the current DEBUGLOG and then I can see whats going on.....
Regards......Mr.Servo
basically, it does not matter what numerical values the IDs 'Vendor' and 'ProdID' have. That depends on the product. The only thing that matters is that OpenATV is able to handle the USB modem, right? And we see, that your hardware have been accepted by OpenATV!!! So far so good!
You have to exit the 3GModemManager before unplugging/plugging another USB modem and start it again after plugging in another USB modem. Best is to performe a GUI-restart!
I see that everything works fine until the point "4. Attempt to connect", but then you get an error message?
Please forward again the current DEBUGLOG and then I can see whats going on.....
Regards......Mr.Servo
-
- Member
- Beiträge: 77
- Registriert: 09 Jan 2023 18:36
- Hat gedankt: 2 Mal
- Hat Dank erhalten: 13 Mal
Mr.Servo hat geschrieben:Hi biolog,
basically, it does not matter what numerical values the IDs 'Vendor' and 'ProdID' have. That depends on the product. The only thing that matters is that OpenATV is able to handle the USB modem, right? And we see, that your hardware have been accepted by OpenATV!!! So far so good!
You have to exit the 3GModemManager before unplugging/plugging another USB modem and start it again after plugging in another USB modem. Best is to performe a GUI-restart!
I see that everything works fine until the point "4. Attempt to connect", but then you get an error message?
Please forward again the current DEBUGLOG and then I can see whats going on.....
Regards......Mr.Servo
see the file
- Dateianhänge
-
- DEBUGLOG.TXT
- (56.4 KiB) 40-mal heruntergeladen
- Mr.Servo
- Developer
- Beiträge: 2965
- Registriert: 10 Aug 2020 22:09
- Wohnort: Pfalz / Palatinate
- Receiver 1: GigaBlue UE 4K Cable (OpenATV 7.5.1)
- Receiver 2: Mut@nt HD51 4K Cable (OpenATV 7.6)
- Receiver 3: VU+ Uno 4K Cable (OpenATV 7.5.1)
- Hat gedankt: 2020 Mal
- Hat Dank erhalten: 2480 Mal
- Geschlecht:
Please try next Testversion!
Hint: It is much easier to create a screenshot as follows:
1. open a normal WEB browser (e.g. Firefox) on your desktop or tablet (e.g. Windows or Android or whatever).
2. enter the IP address of your box (e.g. 192.168.1.11). Now the WebIF (= WebInterface) appears and there you see the screen output.
3. with right mouse button you can save the picture there.
It's late now, we shall continue tomorrow...
Regards......Mr.Servo
Hint: It is much easier to create a screenshot as follows:
1. open a normal WEB browser (e.g. Firefox) on your desktop or tablet (e.g. Windows or Android or whatever).
2. enter the IP address of your box (e.g. 192.168.1.11). Now the WebIF (= WebInterface) appears and there you see the screen output.
3. with right mouse button you can save the picture there.
It's late now, we shall continue tomorrow...
Regards......Mr.Servo
- Mr.Servo
- Developer
- Beiträge: 2965
- Registriert: 10 Aug 2020 22:09
- Wohnort: Pfalz / Palatinate
- Receiver 1: GigaBlue UE 4K Cable (OpenATV 7.5.1)
- Receiver 2: Mut@nt HD51 4K Cable (OpenATV 7.6)
- Receiver 3: VU+ Uno 4K Cable (OpenATV 7.5.1)
- Hat gedankt: 2020 Mal
- Hat Dank erhalten: 2480 Mal
- Geschlecht:
Okay! Next try! I have overworked a lot. Please try this version and in case it fails, close plugin and start it and try again. In the very first run, the modem will receive and store your selected provider-APN and it might happen, that the dial-in won't work at this very first time. So please perform a second try when first try fails.
All important details were stored in the DEBUGLOG! In case you want to forward it, please perform a GUI-restart first, restart '3GModemManager' and after you got an error-message, forward latest DEBUGLOG. Only with a DEBUGLOG I can analyse and find the mistake.
As you can see in the ZIP-file, I have tried to complete a Russian translation. In case you would like to improve this translation, please download free translation editor 'Poedit' (download klick here) and then install it.
1. open translation sourcefile 'ru.po' with 'Poedit'
2. correct wrong or undesired translations
3. press button 'Verify' for checking you translation
4. press button 'Save' to save the result in file 'ru.po' and 'ru.mo'
5. rename 'ru.mo' to '3GModemManager.mo'
6. copy and overwrite existing '3GModemManager.mo' on box with your new one in path: '/usr/lib/enigma2/python/Plugins/SystemPlugins/3GModemManager/locale/ru/LC_MESSAGES/'
7. perform a GUI-restart and enjoy
In case you send me your overworked translation sourcefile 'ru.po', I can put this in the plugin update feed.
Thanks & Regards.....Mr.Servo
All important details were stored in the DEBUGLOG! In case you want to forward it, please perform a GUI-restart first, restart '3GModemManager' and after you got an error-message, forward latest DEBUGLOG. Only with a DEBUGLOG I can analyse and find the mistake.
As you can see in the ZIP-file, I have tried to complete a Russian translation. In case you would like to improve this translation, please download free translation editor 'Poedit' (download klick here) and then install it.
1. open translation sourcefile 'ru.po' with 'Poedit'
2. correct wrong or undesired translations
3. press button 'Verify' for checking you translation
4. press button 'Save' to save the result in file 'ru.po' and 'ru.mo'
5. rename 'ru.mo' to '3GModemManager.mo'
6. copy and overwrite existing '3GModemManager.mo' on box with your new one in path: '/usr/lib/enigma2/python/Plugins/SystemPlugins/3GModemManager/locale/ru/LC_MESSAGES/'
7. perform a GUI-restart and enjoy
In case you send me your overworked translation sourcefile 'ru.po', I can put this in the plugin update feed.
Thanks & Regards.....Mr.Servo
- Dateianhänge
-
[Die Dateierweiterung po wurde deaktiviert und kann nicht länger angezeigt werden.]
-
- 3GModemManager_Testversion_2023-07-29a.zip
- (16.36 KiB) 17-mal heruntergeladen
-
- Member
- Beiträge: 77
- Registriert: 09 Jan 2023 18:36
- Hat gedankt: 2 Mal
- Hat Dank erhalten: 13 Mal
Mr.Servo hat geschrieben:Okay! Next try! I have overworked a lot. Please try this version and in case it fails, close plugin and start it and try again. In the very first run, the modem will receive and store your selected provider-APN and it might happen, that the dial-in won't work at this very first time. So please perform a second try when first try fails.
All important details were stored in the DEBUGLOG! In case you want to forward it, please perform a GUI-restart first, restart '3GModemManager' and after you got an error-message, forward latest DEBUGLOG. Only with a DEBUGLOG I can analyse and find the mistake.
As you can see in the ZIP-file, I have tried to complete a Russian translation. In case you would like to improve this translation, please download free translation editor 'Poedit' (download klick here) and then install it.
1. open translation sourcefile 'ru.po' with 'Poedit'
2. correct wrong or undesired translations
3. press button 'Verify' for checking you translation
4. press button 'Save' to save the result in file 'ru.po' and 'ru.mo'
5. rename 'ru.mo' to '3GModemManager.mo'
6. copy and overwrite existing '3GModemManager.mo' on box with your new one in path: '/usr/lib/enigma2/python/Plugins/SystemPlugins/3GModemManager/locale/ru/LC_MESSAGES/'
7. perform a GUI-restart and enjoy
In case you send me your overworked translation sourcefile 'ru.po', I can put this in the plugin update feed.
Thanks & Regards.....Mr.Servo
3g modem does not connect, look at the file
- Dateianhänge
-
- DEBUGLOG.TXT
- (56.5 KiB) 18-mal heruntergeladen
- Mr.Servo
- Developer
- Beiträge: 2965
- Registriert: 10 Aug 2020 22:09
- Wohnort: Pfalz / Palatinate
- Receiver 1: GigaBlue UE 4K Cable (OpenATV 7.5.1)
- Receiver 2: Mut@nt HD51 4K Cable (OpenATV 7.6)
- Receiver 3: VU+ Uno 4K Cable (OpenATV 7.5.1)
- Hat gedankt: 2020 Mal
- Hat Dank erhalten: 2480 Mal
- Geschlecht:
It seems to me that the script file '3gcommand' has not the permission rights to being executed.
Please klick the file '3gcommand' with your FTP-Program (e.g. FileZilla) with the right mouse and allow the file permissions '755' means:'Execute allowed for all Programs'
Regards......Mr.Servo
Please klick the file '3gcommand' with your FTP-Program (e.g. FileZilla) with the right mouse and allow the file permissions '755' means:'Execute allowed for all Programs'
Regards......Mr.Servo
- Dateianhänge
-
- Dateinrechte.png (16.29 KiB) 371 mal betrachtet