Thanks Thanks:  0
Seite 2 von 3 ErsteErste 123 LetzteLetzte
Ergebnis 11 bis 20 von 28
  1. #11
    Avatar von mike99
    Registriert seit
    05.04.2013
    Ort
    Berlin
    Beiträge
    7.646
    Total Downloaded
    271,45 MB
    Total Downloaded
    271,45 MB
    ReceiverDankeAktivitäten
    und die Telnetausgabe von

    cat /proc/bus/nim_sockets
    Gruss Mike



    GB UE 4K Cable FBC
    + PnP C/T2 Tuner mit FreenetModul
    Axas E4HD Ultra Sat + Dual DVB-C/T2
    Mut@nt HD-51 - 2x DVB-C/T2

    Toshiba 40TL838


    •   Alt Advertising

       

  2. #12
    Anfänger Avatar von Dolphin
    Registriert seit
    06.02.2015
    Ort
    Wipperfürth / NRW
    Beiträge
    21
    Themenstarter
    Total Downloaded
    43,01 MB
    Total Downloaded
    43,01 MB
    ReceiverDankeAktivitäten
    Box 1:
    Golden Interstar Xpeed LX3 / SAT
     
     
    Box 2:
    Unibox HD eco+ / Kabel
     
     
    Box 3:
    DBox 2 Sagem / SAT
     
     
    dmesg:

    Code:
    devtmpfs: initialized
    NET: Registered protocol family 16
    USB0: power enable is active high; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    PCI host bridge to bus 0000:01
    pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
    pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
    pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
    pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
    pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00000fff]
    pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
    pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
    pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
    pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
    Bluetooth: Core ver 2.18
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    Switched to clocksource upg
    cfg80211: Calling CRDA to update world regulatory domain
    NET: Registered protocol family 2
    TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 4096 bind 4096)
    TCP: reno registered
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    futex hash table entries: 512 (order: 3, 32768 bytes)
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.22)
    msgmni has been set to 562
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    bootconsole [early0] disabled
    serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66, base_baud = 5062500) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67, base_baud = 5062500) is a 16550A
    loop: module loaded
    sata_brcmstb 0000:01:00.0: version 4.0
    __clk_enable: sata [1]
    PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
    scsi0 : sata_brcmstb
    scsi1 : sata_brcmstb
    ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
    ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
    Broadcom STB NAND controller (BrcmNand Controller)
    Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    NOR chip too large to fit in mapping. Attempting to cope...
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    Reducing visibility of 8192KiB chip to 2048KiB
    Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    Creating 6 MTD partitions on "Broadcom 9xxxx mapped flash":
    0x000000000000-0x000000400000 : "avail0"
    0x000000400000-0x000000480000 : "cfe"
    0x000000480000-0x0000007e0000 : "splash"
    0x0000007e0000-0x0000007f0000 : "macadr"
    0x0000007f0000-0x000000800000 : "nvram"
    0x000000000000-0x000000800000 : "Norcomplete"
    bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    bcmemac: registered interface #0 at 0x10080000 as 'eth0' (a4:7b:85:05:59:b6)
    bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
    usbcore: registered new interface driver zd1201
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
    ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-9: WL500GLSA854G, 01.01A01, max UDMA/133
    ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access     ATA      WL500GLSA854G    01.0 PQ: 0 ANSI: 5
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] 4096-byte physical blocks
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR SANYO protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    EBI CS1: setting up NOR flash (primary)
    mtd->oobsize=0, mtd->eccOobSize=0
    NAND_CS_NAND_XOR=00000000
    B4: NandSelect=50000200, nandConfig=18152300, chipSelect=1
    brcmnand_read_id: CS1: dev_id=01d3d195
    After: NandSelect=50000200, nandConfig=18152300
    Block size=00020000, erase shift=17
    NAND Config: Reg=38152300, chipSize=1024 MB, blockSize=128K, erase_shift=11
    busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    timing1 not adjusted: 5363444f
    timing2 not adjusted: 00000fc6
    eccLevel=15, 1Ksector=0, oob=16
    nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
    BrcmNAND mfg 1 d3 SPANSION_S30ML08GP_08 1024MB on CS1
    
    Found NAND on CS1: ACC=d7ff1010, cfg=38152300, flashId=01d3d195, tim1=5363444f, tim2=00000fc6
    BrcmNAND version = 0x0302 1024MB @00000000
    B4: NandSelect=50000200, nandConfig=38152300, chipSelect=1
    brcmnand_read_id: CS1: dev_id=01d3d195
    After: NandSelect=50000200, nandConfig=38152300
    Found NAND flash on Chip Select 1, chipSize=1024MB, usable size=1024MB, base=0
    brcmnand_scan: B4 nand_select = 50000200
    brcmnand_scan: After nand_select = 50000200
    page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17
    Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000
    ECC layout=brcmnand_oob_bch4_4k
    brcmnand_scan:  mtd->oobsize=64
    brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    -->brcmnand_default_bbt
    brcmnand_default_bbt: bbt_td = bbt_main_descr
    Bad block table Bbt0 found at page 0007ffc0, version 0x02 for chip on CS1
    Bad block table 1tbB found at page 0007ff80, version 0x02 for chip on CS1
    nand_read_bbt: Bad block at 0x266a0000
    nand_read_bbt: Bad block at 0x3ff80000
    nand_read_bbt: Bad block at 0x3ffa0000
    nand_read_bbt: Bad block at 0x3ffc0000
    nand_read_bbt: Bad block at 0x3ffe0000
    Adjust partition nand_entire_device size from entire device to 3ff80000 to avoid overlap with BBT reserved space
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000600000-0x00003ff00000 : "rootfs"
    0x000000000000-0x000000600000 : "kernel"
    0x000000000000-0x00003ff80000 : "nand_entire_device"
    ata2: SATA link down (SStatus 4 SControl 300)
    UBI: attaching mtd6 to ubi0
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    random: nonblocking pool is initialized
    UBI: scanning is finished
    UBI: attached mtd6 (name "rootfs", size 1017 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 8135, bad PEBs: 1, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 314999097
    UBI: available PEBs: 0, total reserved PEBs: 8135, PEBs reserved for bad PEB handling: 159
    UBI: background thread "ubi_bgt0d" started, PID 53
    ALSA device list:
      No soundcards found.
    UBIFS: parse sync
    UBIFS: background thread "ubifs_bgt0_0" started, PID 54
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 1010855936 bytes (964 MiB, 7961 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 480EF098-C83D-4F74-9F56-E6547BA735A9, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    devtmpfs: mounted
    Freeing unused kernel memory: 216K (807fa000 - 80830000)
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    linuxdvb: module_layout: kernel tainted.
    Disabling lock debugging due to kernel taint
    LinuxDVB  build date (18/11/15)
    DVBT2C Tuner is not connected  
    NULL tuner mode 
    DVB: registering new adapter (linuxtv-bcm)
    input: UNIBOX advanced remote control (native)
     as /devices/virtual/input/input0
    register dbox FP RTC device !
    SGI XFS with security attributes, large block/inode numbers, no debug enabled
    Geändert von Thomas4711 (20.12.2015 um 14:47 Uhr) Grund: in CODE gesetzt

  3. #13
    Anfänger Avatar von Dolphin
    Registriert seit
    06.02.2015
    Ort
    Wipperfürth / NRW
    Beiträge
    21
    Themenstarter
    Total Downloaded
    43,01 MB
    Total Downloaded
    43,01 MB
    ReceiverDankeAktivitäten
    Box 1:
    Golden Interstar Xpeed LX3 / SAT
     
     
    Box 2:
    Unibox HD eco+ / Kabel
     
     
    Box 3:
    DBox 2 Sagem / SAT
     
     
    massages:

    Code:
    Jan  1 01:00:54 uniboxhde syslog.info syslogd started: BusyBox v1.23.2
    Jan  1 01:00:54 uniboxhde user.info kernel: pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
    Jan  1 01:00:54 uniboxhde user.debug kernel: pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
    Jan  1 01:00:54 uniboxhde user.debug kernel: pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00000fff]
    Jan  1 01:00:54 uniboxhde user.debug kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
    Jan  1 01:00:54 uniboxhde user.debug kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
    Jan  1 01:00:54 uniboxhde user.info kernel: pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
    Jan  1 01:00:54 uniboxhde user.info kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: Core ver 2.18
    Jan  1 01:00:54 uniboxhde user.info kernel: NET: Registered protocol family 31
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: HCI device and connection manager initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: HCI socket layer initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: L2CAP socket layer initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: SCO socket layer initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: Switched to clocksource upg
    Jan  1 01:00:54 uniboxhde user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jan  1 01:00:54 uniboxhde user.info kernel: NET: Registered protocol family 2
    Jan  1 01:00:54 uniboxhde user.info kernel: TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    Jan  1 01:00:54 uniboxhde user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    Jan  1 01:00:54 uniboxhde user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
    Jan  1 01:00:54 uniboxhde user.info kernel: TCP: reno registered
    Jan  1 01:00:54 uniboxhde user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
    Jan  1 01:00:54 uniboxhde user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    Jan  1 01:00:54 uniboxhde user.info kernel: NET: Registered protocol family 1
    Jan  1 01:00:54 uniboxhde user.info kernel: RPC: Registered named UNIX socket transport module.
    Jan  1 01:00:54 uniboxhde user.info kernel: RPC: Registered udp transport module.
    Jan  1 01:00:54 uniboxhde user.info kernel: RPC: Registered tcp transport module.
    Jan  1 01:00:54 uniboxhde user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan  1 01:00:54 uniboxhde user.info kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
    Jan  1 01:00:54 uniboxhde user.notice kernel: NFS: Registering the id_resolver key type
    Jan  1 01:00:54 uniboxhde user.notice kernel: Key type id_resolver registered
    Jan  1 01:00:54 uniboxhde user.notice kernel: Key type id_legacy registered
    Jan  1 01:00:54 uniboxhde user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Jan  1 01:00:54 uniboxhde user.info kernel: fuse init (API version 7.22)
    Jan  1 01:00:54 uniboxhde user.info kernel: msgmni has been set to 562
    Jan  1 01:00:54 uniboxhde user.info kernel: io scheduler noop registered
    Jan  1 01:00:54 uniboxhde user.info kernel: io scheduler cfq registered (default)
    Jan  1 01:00:54 uniboxhde user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan  1 01:00:54 uniboxhde user.info kernel: serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22, base_baud = 5062500) is a 16550A
    Jan  1 01:00:54 uniboxhde user.info kernel: console [ttyS0] enabled
    Jan  1 01:00:54 uniboxhde user.info kernel: bootconsole [early0] disabled
    Jan  1 01:00:54 uniboxhde user.info kernel: serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66, base_baud = 5062500) is a 16550A
    Jan  1 01:00:54 uniboxhde user.info kernel: serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67, base_baud = 5062500) is a 16550A
    Jan  1 01:00:54 uniboxhde user.info kernel: loop: module loaded
    Jan  1 01:00:54 uniboxhde user.debug kernel: sata_brcmstb 0000:01:00.0: version 4.0
    Jan  1 01:00:54 uniboxhde user.debug kernel: __clk_enable: sata [1]
    Jan  1 01:00:54 uniboxhde user.warn kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
    Jan  1 01:00:54 uniboxhde user.info kernel: scsi0 : sata_brcmstb
    Jan  1 01:00:54 uniboxhde user.info kernel: scsi1 : sata_brcmstb
    Jan  1 01:00:54 uniboxhde user.info kernel: ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
    Jan  1 01:00:54 uniboxhde user.info kernel: ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
    Jan  1 01:00:54 uniboxhde user.info kernel: Broadcom STB NAND controller (BrcmNand Controller)
    Jan  1 01:00:54 uniboxhde user.info kernel: Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    Jan  1 01:00:54 uniboxhde user.warn kernel: NOR chip too large to fit in mapping. Attempting to cope...
    Jan  1 01:00:54 uniboxhde user.info kernel: Amd/Fujitsu Extended Query Table at 0x0040
    Jan  1 01:00:54 uniboxhde user.info kernel:   Amd/Fujitsu Extended Query version 1.3.
    Jan  1 01:00:54 uniboxhde user.notice kernel: number of CFI chips: 1
    Jan  1 01:00:54 uniboxhde user.warn kernel: Reducing visibility of 8192KiB chip to 2048KiB
    Jan  1 01:00:54 uniboxhde user.info kernel: Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    Jan  1 01:00:54 uniboxhde user.info kernel: Amd/Fujitsu Extended Query Table at 0x0040
    Jan  1 01:00:54 uniboxhde user.info kernel:   Amd/Fujitsu Extended Query version 1.3.
    Jan  1 01:00:54 uniboxhde user.notice kernel: number of CFI chips: 1
    Jan  1 01:00:54 uniboxhde user.notice kernel: Creating 6 MTD partitions on "Broadcom 9xxxx mapped flash":
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000000000-0x000000400000 : "avail0"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000400000-0x000000480000 : "cfe"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000480000-0x0000007e0000 : "splash"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x0000007e0000-0x0000007f0000 : "macadr"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x0000007f0000-0x000000800000 : "nvram"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000000000-0x000000800000 : "Norcomplete"
    Jan  1 01:00:54 uniboxhde user.info kernel: bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    Jan  1 01:00:54 uniboxhde user.info kernel: bcmemac: registered interface #0 at 0x10080000 as 'eth0' (a4:7b:85:05:59:b6)
    Jan  1 01:00:54 uniboxhde user.info kernel: bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
    Jan  1 01:00:54 uniboxhde user.info kernel: usbcore: registered new interface driver zd1201
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 1-0:1.0: USB hub found
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 1-0:1.0: 2 ports detected
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
    Jan  1 01:00:54 uniboxhde user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 2-0:1.0: USB hub found
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 2-0:1.0: 2 ports detected
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 3-0:1.0: USB hub found
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 3-0:1.0: 2 ports detected
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
    Jan  1 01:00:54 uniboxhde user.info kernel: ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
    Jan  1 01:00:54 uniboxhde user.info kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan  1 01:00:54 uniboxhde user.info kernel: ata1.00: ATA-9: WL500GLSA854G, 01.01A01, max UDMA/133
    Jan  1 01:00:54 uniboxhde user.info kernel: ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    Jan  1 01:00:54 uniboxhde user.info kernel: ata1.00: configured for UDMA/133
    Jan  1 01:00:54 uniboxhde user.notice kernel: scsi 0:0:0:0: Direct-Access     ATA      WL500GLSA854G    01.0 PQ: 0 ANSI: 5
    Jan  1 01:00:54 uniboxhde user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
    Jan  1 01:00:54 uniboxhde user.notice kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    Jan  1 01:00:54 uniboxhde user.notice kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
    Jan  1 01:00:54 uniboxhde user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan  1 01:00:54 uniboxhde user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan  1 01:00:54 uniboxhde user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 4-0:1.0: USB hub found
    Jan  1 01:00:54 uniboxhde user.info kernel: hub 4-0:1.0: 2 ports detected
    Jan  1 01:00:54 uniboxhde user.info kernel: usbcore: registered new interface driver usb-storage
    Jan  1 01:00:54 uniboxhde user.info kernel: mousedev: PS/2 mouse device common for all mice
    Jan  1 01:00:54 uniboxhde user.info kernel: i2c /dev entries driver
    Jan  1 01:00:54 uniboxhde user.info kernel: IR NEC protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR RC5(x) protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR RC6 protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR JVC protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR Sony protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR RC5 (streamzap) protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR SANYO protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
    Jan  1 01:00:54 uniboxhde user.info kernel: usbcore: registered new interface driver btusb
    Jan  1 01:00:54 uniboxhde user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jan  1 01:00:54 uniboxhde user.info kernel: usbcore: registered new interface driver usbhid
    Jan  1 01:00:54 uniboxhde user.info kernel: usbhid: USB HID core driver
    Jan  1 01:00:54 uniboxhde user.info kernel: TCP: cubic registered
    Jan  1 01:00:54 uniboxhde user.info kernel: NET: Registered protocol family 17
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Jan  1 01:00:54 uniboxhde user.info kernel: Bluetooth: HIDP socket layer initialized
    Jan  1 01:00:54 uniboxhde user.notice kernel: Key type dns_resolver registered
    Jan  1 01:00:54 uniboxhde user.info kernel: PM: CP0 COUNT/COMPARE frequency depends on divisor
    Jan  1 01:00:54 uniboxhde user.info kernel: EBI CS1: setting up NOR flash (primary)
    Jan  1 01:00:54 uniboxhde user.info kernel: mtd->oobsize=0, mtd->eccOobSize=0
    Jan  1 01:00:54 uniboxhde user.warn kernel: NAND_CS_NAND_XOR=00000000
    Jan  1 01:00:54 uniboxhde user.warn kernel: B4: NandSelect=50000200, nandConfig=18152300, chipSelect=1
    Jan  1 01:00:54 uniboxhde user.warn kernel: brcmnand_read_id: CS1: dev_id=01d3d195
    Jan  1 01:00:54 uniboxhde user.warn kernel: After: NandSelect=50000200, nandConfig=18152300
    Jan  1 01:00:54 uniboxhde user.warn kernel: Block size=00020000, erase shift=17
    Jan  1 01:00:54 uniboxhde user.info kernel: NAND Config: Reg=38152300, chipSize=1024 MB, blockSize=128K, erase_shift=11
    Jan  1 01:00:54 uniboxhde user.info kernel: busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    Jan  1 01:00:54 uniboxhde user.warn kernel: timing1 not adjusted: 5363444f
    Jan  1 01:00:54 uniboxhde user.warn kernel: timing2 not adjusted: 00000fc6
    Jan  1 01:00:54 uniboxhde user.warn kernel: eccLevel=15, 1Ksector=0, oob=16
    Jan  1 01:00:54 uniboxhde user.warn kernel: nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
    Jan  1 01:00:54 uniboxhde user.warn kernel: <--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
    Jan  1 01:00:54 uniboxhde user.info kernel: BrcmNAND mfg 1 d3 SPANSION_S30ML08GP_08 1024MB on CS1
    Jan  1 01:00:54 uniboxhde user.info kernel: Found NAND on CS1: ACC=d7ff1010, cfg=38152300, flashId=01d3d195, tim1=5363444f, tim2=00000fc6
    Jan  1 01:00:54 uniboxhde user.info kernel: BrcmNAND version = 0x0302 1024MB @00000000
    Jan  1 01:00:54 uniboxhde user.warn kernel: B4: NandSelect=50000200, nandConfig=38152300, chipSelect=1
    Jan  1 01:00:54 uniboxhde user.warn kernel: brcmnand_read_id: CS1: dev_id=01d3d195
    Jan  1 01:00:54 uniboxhde user.warn kernel: After: NandSelect=50000200, nandConfig=38152300
    Jan  1 01:00:54 uniboxhde user.warn kernel: Found NAND flash on Chip Select 1, chipSize=1024MB, usable size=1024MB, base=0
    Jan  1 01:00:54 uniboxhde user.warn kernel: brcmnand_scan: B4 nand_select = 50000200
    Jan  1 01:00:54 uniboxhde user.warn kernel: brcmnand_scan: After nand_select = 50000200
    Jan  1 01:00:54 uniboxhde user.info kernel: page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17
    Jan  1 01:00:54 uniboxhde user.info kernel: Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000
    Jan  1 01:00:54 uniboxhde user.warn kernel: ECC layout=brcmnand_oob_bch4_4k
    Jan  1 01:00:54 uniboxhde user.info kernel: brcmnand_scan:  mtd->oobsize=64
    Jan  1 01:00:54 uniboxhde user.info kernel: brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    Jan  1 01:00:54 uniboxhde user.info kernel: brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    Jan  1 01:00:54 uniboxhde user.warn kernel: -->brcmnand_default_bbt
    Jan  1 01:00:54 uniboxhde user.warn kernel: brcmnand_default_bbt: bbt_td = bbt_main_descr
    Jan  1 01:00:54 uniboxhde user.debug kernel: Bad block table Bbt0 found at page 0007ffc0, version 0x02 for chip on CS1
    Jan  1 01:00:54 uniboxhde user.debug kernel: Bad block table 1tbB found at page 0007ff80, version 0x02 for chip on CS1
    Jan  1 01:00:54 uniboxhde user.debug kernel: nand_read_bbt: Bad block at 0x266a0000
    Jan  1 01:00:54 uniboxhde user.debug kernel: nand_read_bbt: Bad block at 0x3ff80000
    Jan  1 01:00:54 uniboxhde user.debug kernel: nand_read_bbt: Bad block at 0x3ffa0000
    Jan  1 01:00:54 uniboxhde user.debug kernel: nand_read_bbt: Bad block at 0x3ffc0000
    Jan  1 01:00:54 uniboxhde user.debug kernel: nand_read_bbt: Bad block at 0x3ffe0000
    Jan  1 01:00:54 uniboxhde user.warn kernel: Adjust partition nand_entire_device size from entire device to 3ff80000 to avoid overlap with BBT reserved space
    Jan  1 01:00:54 uniboxhde user.notice kernel: Creating 3 MTD partitions on "brcmnand.0":
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000600000-0x00003ff00000 : "rootfs"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000000000-0x000000600000 : "kernel"
    Jan  1 01:00:54 uniboxhde user.notice kernel: 0x000000000000-0x00003ff80000 : "nand_entire_device"
    Jan  1 01:00:54 uniboxhde user.info kernel: ata2: SATA link down (SStatus 4 SControl 300)
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: attaching mtd6 to ubi0
    Jan  1 01:00:54 uniboxhde user.info kernel:  sda: sda1
    Jan  1 01:00:54 uniboxhde user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan  1 01:00:54 uniboxhde user.notice kernel: random: nonblocking pool is initialized
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: scanning is finished
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: attached mtd6 (name "rootfs", size 1017 MiB) to ubi0
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: good PEBs: 8135, bad PEBs: 1, corrupted PEBs: 0
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 314999097
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 8135, PEBs reserved for bad PEB handling: 159
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 53
    Jan  1 01:00:54 uniboxhde user.info kernel: ALSA device list:
    Jan  1 01:00:54 uniboxhde user.info kernel:   No soundcards found.
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: parse sync
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 54
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: FS size: 1010855936 bytes (964 MiB, 7961 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
    Jan  1 01:00:54 uniboxhde user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 480EF098-C83D-4F74-9F56-E6547BA735A9, small LPT model
    Jan  1 01:00:54 uniboxhde user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:13.
    Jan  1 01:00:54 uniboxhde user.info kernel: devtmpfs: mounted
    Jan  1 01:00:54 uniboxhde user.info kernel: Freeing unused kernel memory: 216K (807fa000 - 80830000)
    Jan  1 01:00:54 uniboxhde user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jan  1 01:00:54 uniboxhde user.warn kernel: linuxdvb: module_layout: kernel tainted.
    Jan  1 01:00:54 uniboxhde user.warn kernel: Disabling lock debugging due to kernel taint
    Jan  1 01:00:54 uniboxhde user.warn kernel: LinuxDVB  build date (18/11/15)
    Jan  1 01:00:54 uniboxhde user.warn kernel: DVBT2C Tuner is not connected  
    Jan  1 01:00:54 uniboxhde user.warn kernel: NULL tuner mode 
    Jan  1 01:00:54 uniboxhde user.info kernel: DVB: registering new adapter (linuxtv-bcm)
    Jan  1 01:00:54 uniboxhde user.info kernel: input: UNIBOX advanced remote control (native)
    Jan  1 01:00:54 uniboxhde user.info kernel:  as /devices/virtual/input/input0
    Jan  1 01:00:54 uniboxhde user.warn kernel: register dbox FP RTC device !
    Jan  1 01:00:54 uniboxhde user.info kernel: SGI XFS with security attributes, large block/inode numbers, no debug enabled
    Jan  1 01:00:54 uniboxhde user.info kernel: NET: Registered protocol family 10
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Found user 'avahi' (UID 996) and group 'avahi' (GID 995).
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Successfully dropped root privileges.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: avahi-daemon 0.6.31 starting up.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Successfully called chroot().
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Successfully dropped remaining capabilities.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Loading service file /services/ftp.service.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Loading service file /services/sftp-ssh.service.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Loading service file /services/ssh.service.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.100.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: New relevant interface eth0.IPv4 for mDNS.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Network interface enumeration completed.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Registering new address record for fe80::a67b:85ff:fe05:59b6 on eth0.*.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Registering new address record for 192.168.0.100 on eth0.IPv4.
    Jan  1 01:00:54 uniboxhde daemon.info avahi-daemon[467]: Registering HINFO record with values 'MIPS'/'LINUX'.
    Jan  1 01:00:55 uniboxhde daemon.info avahi-daemon[467]: Server startup complete. Host name is uniboxhde.local. Local service cookie is 105763456.
    Jan  1 01:00:56 uniboxhde daemon.info avahi-daemon[467]: Service "uniboxhde" (/services/ssh.service) successfully established.
    Jan  1 01:00:56 uniboxhde daemon.info avahi-daemon[467]: Service "uniboxhde" (/services/sftp-ssh.service) successfully established.
    Jan  1 01:00:56 uniboxhde daemon.info avahi-daemon[467]: Service "FTP file server on uniboxhde" (/services/ftp.service) successfully established.
    Dec 20 15:29:09 uniboxhde daemon.notice ntpdate[361]: step time server 46.4.24.238 offset 1450621692.497030 sec
    Dec 20 15:29:12 uniboxhde cron.err crond[438]: time disparity of 24177028 minutes detected
    Dec 20 15:29:43 uniboxhde daemon.crit automount[389]: key "logs" not found in map source(s).
    Geändert von Thomas4711 (20.12.2015 um 14:47 Uhr) Grund: in CODE gesetzt

  4. #14
    Anfänger Avatar von Dolphin
    Registriert seit
    06.02.2015
    Ort
    Wipperfürth / NRW
    Beiträge
    21
    Themenstarter
    Total Downloaded
    43,01 MB
    Total Downloaded
    43,01 MB
    ReceiverDankeAktivitäten
    Box 1:
    Golden Interstar Xpeed LX3 / SAT
     
     
    Box 2:
    Unibox HD eco+ / Kabel
     
     
    Box 3:
    DBox 2 Sagem / SAT
     
     
    Telnet kenn ich mich nicht mit aus!

  5. #15
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.163
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Installier dir Putty und gib das ein was
    mike99 geschrieben hat. Die Ausgabe dann hier posten.

    Telnet


  6. #16
    Anfänger Avatar von Dolphin
    Registriert seit
    06.02.2015
    Ort
    Wipperfürth / NRW
    Beiträge
    21
    Themenstarter
    Total Downloaded
    43,01 MB
    Total Downloaded
    43,01 MB
    ReceiverDankeAktivitäten
    Box 1:
    Golden Interstar Xpeed LX3 / SAT
     
     
    Box 2:
    Unibox HD eco+ / Kabel
     
     
    Box 3:
    DBox 2 Sagem / SAT
     
     
    login as: root
    root@uniboxhde:~#
    root@uniboxhde:~#
    root@uniboxhde:~# cat/proc/bus/nim_sockets
    -sh: cat/proc/bus/nim_sockets: No such file or directory
    root@uniboxhde:~# cat/proc/bus/nim_sockets
    -sh: cat/proc/bus/nim_sockets: No such file or directory
    root@uniboxhde:~# /cat/proc/bus/nim_sockets
    -sh: /cat/proc/bus/nim_sockets: No such file or directory
    root@uniboxhde:~#

  7. #17
    Avatar von mike99
    Registriert seit
    05.04.2013
    Ort
    Berlin
    Beiträge
    7.646
    Total Downloaded
    271,45 MB
    Total Downloaded
    271,45 MB
    ReceiverDankeAktivitäten
    oder unter Windows, Start -> Ausführen , IP deiner Box anpassen

    telnet 192.168.0.0


    Edit: - hast Leerzeichen hinter cat vergessen
    Gruss Mike



    GB UE 4K Cable FBC
    + PnP C/T2 Tuner mit FreenetModul
    Axas E4HD Ultra Sat + Dual DVB-C/T2
    Mut@nt HD-51 - 2x DVB-C/T2

    Toshiba 40TL838


  8. #18
    Anfänger Avatar von Dolphin
    Registriert seit
    06.02.2015
    Ort
    Wipperfürth / NRW
    Beiträge
    21
    Themenstarter
    Total Downloaded
    43,01 MB
    Total Downloaded
    43,01 MB
    ReceiverDankeAktivitäten
    Box 1:
    Golden Interstar Xpeed LX3 / SAT
     
     
    Box 2:
    Unibox HD eco+ / Kabel
     
     
    Box 3:
    DBox 2 Sagem / SAT
     
     
    Selbe Ergebnis bei Telnet, No such File or Directory.

  9. #19
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.163
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Code:
    cat /proc/bus/nim_sockets

  10. #20
    Avatar von mike99
    Registriert seit
    05.04.2013
    Ort
    Berlin
    Beiträge
    7.646
    Total Downloaded
    271,45 MB
    Total Downloaded
    271,45 MB
    ReceiverDankeAktivitäten
    Wenn das nicht geht "cat /proc/bus/nim_sockets"
    Sollte zB solch Ausgabe kommen.
    root@et8000:~# cat /proc/bus/nim_sockets
    NIM Socket 0:
    Type: DVB-C
    Name: TDA10024
    Has_Outputs: yes
    Internally_Connectable: 0
    Frontend_Device: 0
    I2C_Device: 3
    Flash mal komplett neu, ohne Wiederherstellung!
    Gruss Mike



    GB UE 4K Cable FBC
    + PnP C/T2 Tuner mit FreenetModul
    Axas E4HD Ultra Sat + Dual DVB-C/T2
    Mut@nt HD-51 - 2x DVB-C/T2

    Toshiba 40TL838



Seite 2 von 3 ErsteErste 123 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 18:20 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2020 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com