Thanks Thanks:  2
Ergebnis 1 bis 7 von 7
  1. #1
    Anfänger
    Registriert seit
    23.12.2014
    Beiträge
    5
    Total Downloaded
    225,55 MB
    Total Downloaded
    225,55 MB
    ReceiverDankeAktivitäten

    Unibox Eco+ -> Spinner jede Nacht um 00:00 Uhr

    Hallöle,

    bei meiner Unibox HDECO+ kommt jede Nacht um 00:00 Uhr der Spinner. Nach etwa 15 Min ist der Spuk wieder vorbei.
    Es läuft kein EPG-Update, das kommt erst um 02:00 Uhr.
    Ich finde den Fehler nicht.

    Image: OpenATV Ver 4.2 vom 14.Aug.2015

    Auch andere Images zeigen den Fehler.

    Da fragt sich der Chinesische Beratungsminister:

    WatNu?

    TschÖ

    TVR

    •   Alt Advertising

       

  2. #2
    Avatar von laptan
    Registriert seit
    25.08.2013
    Ort
    openATV
    Beiträge
    1.666
    Total Downloaded
    28,77 MB
    Total Downloaded
    28,77 MB
    ReceiverDankeAktivitäten
    Box 1:
    uniBOX HD 1 PLUS
     
     
    Box 2:
    VU+ Zero
     
     
    Box 3:
    AX Triplex
     
     
    Box 4:
    MEGASAT Force 1 Plus
     
     
    var/log die Datei message kopieren, zu dem Zeitpunkt wenn der Spinner auftritt, ebenso die Datei dmesg und dann hier posten.

    oder die eco mal mit dem 5.1 Image Flashen


    Receiver I: Ax Triplex (Image Vers. 6.1 vom: 20180207)
    Receiver II: VU+ Zero (Image Vers. 6.1 vom: 20180206)
    Receiver III: MEGASAT Force 1+ (Image Vers. 5.3 vom: 20170121)




  3. #3
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.424
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    Geisterstunde mal in den ecken im Zimmer nach schauen


    openATV we are open Source

    Boykott GPL violator

  4. Thanks laptan bedankten sich
  5. #4
    Anfänger
    Registriert seit
    23.12.2014
    Beiträge
    5
    Themenstarter
    Total Downloaded
    225,55 MB
    Total Downloaded
    225,55 MB
    ReceiverDankeAktivitäten
    Hallo,

    jetzt konnte ich mal diese Dateien sichern, während der Spinner erschien:


    Inhalt der messages - Datei (Auszug aus dieser Datei vom ende dieser Datei, nicht der gesamte Inhalt, als der Spinner auftrat, dieses mal um 23:19)
    Diese Datei hat das Datum: 16.08.2015 23:19 und das bleibt so, die Datei wird nicht größer!
    Code:
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Unhandled kernel unaligned access[#1]:
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: CPU: 0 PID: 125 Comm: sched_high Tainted: GF          O 3.14.21 #3
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: task: cfd40010 ti: cf4b0000 task.ti: cf4b0000
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $ 0   : 00000000 10008700 10008701 00010000
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $ 4   : da7adeb5 00000001 00000001 00000000
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $ 8   : 00000000 00000001 00000002 00000010
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $12   : f6f33e28 00000000 00000000 00f43f28
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $16   : da7adeb5 e0edaac0 00000000 e0ea167c
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $20   : e08df87c 00000000 e0edaac0 e097b8b4
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $24   : 00000000 8006e120                  
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: $28   : cf4b0000 cf4b1d80 cf3b6880 806695cc
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Hi    : 0003edb8
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Lo    : c2bc07c0
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: epc   : 806695d0 _raw_spin_lock_irqsave+0x18/0x48
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel:     Tainted: GF          O
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: ra    : 806695cc _raw_spin_lock_irqsave+0x14/0x48
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Status: 10008702    KERNEL EXL 
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Cause : 00800010
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: BadVA : da7adeb5
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: PrId  : 0002a044 (Broadcom BMIPS4380)
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Modules linked in: ipv6 linuxdvb(OF)
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Process sched_high (pid: 125, threadinfo=cf4b0000, task=cfd40010, tls=00000000)
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Stack : c2bc07c0 e0ea0000 00800400 80319930 da7adeb5 8006e148 cf39ed80 8006e120
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel:       00000020 e09940d0 00000000 cff35400 00000001 00000001 cff35400 e0edaac0
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel:       00000020 e08df924 00000000 e08df7fc 00000000 e097b7c0 e103c57c 00000000
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel:       00000020 e0994414 e08df768 cec93f80 e0f20000 e097b770 e0ea167c e097d63c
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel:       81607400 8005b54c cffac4d4 10008700 cf4b1e2c 00000000 cec93f00 cec93f00
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel:       ...
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Call Trace:
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<806695d0>] _raw_spin_lock_irqsave+0x18/0x48
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<8006e148>] __wake_up+0x28/0x64
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<e08df924>] psi_filter_cb+0xa8/0x198 [linuxdvb]
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<e097d63c>] NEXUS_P_Scheduler_Step+0x4bc/0x8e4 [linuxdvb]
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<e097da98>] NEXUS_P_Scheduler_Thread+0x34/0x50 [linuxdvb]
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<e097e374>] NEXUS_P_ThreadStart+0x24/0x74 [linuxdvb]
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<8004ef4c>] kthread+0x10c/0x124
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: [<80006388>] ret_from_kernel_thread+0x14/0x1c
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: Code: 0c0c663a  00808021  3c030001 <c2040000> 00832821  e2050000  10a0fffc  00042c02  3084ffff 
    Aug 16 23:19:49 UNIBOXHDE_1 user.warn kernel: ---[ end trace 4543a91829f20d57 ]--- 
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Inhalt der dmesg - Datei (die gesamte Datei, als der Spinner auftrat, dieses mal um 23:19)
    Diese Datei hat das Datum: 01.01.1970 01:00 und das bleibt so, die Datei wird nicht größer!
    Code:
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00000fff]
    pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
    pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
    pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
    pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
    Bluetooth: Core ver 2.18
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    Switched to clocksource upg
    cfg80211: Calling CRDA to update world regulatory domain
    NET: Registered protocol family 2
    TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 4096 bind 4096)
    TCP: reno registered
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    futex hash table entries: 512 (order: 3, 32768 bytes)
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.22)
    msgmni has been set to 562
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    bootconsole [early0] disabled
    serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66, base_baud = 5062500) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67, base_baud = 5062500) is a 16550A
    loop: module loaded
    sata_brcmstb 0000:01:00.0: version 4.0
    __clk_enable: sata [1]
    PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
    scsi0 : sata_brcmstb
    scsi1 : sata_brcmstb
    ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
    ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
    Broadcom STB NAND controller (BrcmNand Controller)
    Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    NOR chip too large to fit in mapping. Attempting to cope...
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    Reducing visibility of 8192KiB chip to 2048KiB
    Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    Creating 6 MTD partitions on "Broadcom 9xxxx mapped flash":
    0x000000000000-0x000000400000 : "avail0"
    0x000000400000-0x000000480000 : "cfe"
    0x000000480000-0x0000007e0000 : "splash"
    0x0000007e0000-0x0000007f0000 : "macadr"
    0x0000007f0000-0x000000800000 : "nvram"
    0x000000000000-0x000000800000 : "Norcomplete"
    bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    bcmemac: registered interface #0 at 0x10080000 as 'eth0' (a4:7b:85:05:7f:46)
    bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
    usbcore: registered new interface driver zd1201
    usbcore: registered new interface driver asix
    usbcore: registered new interface driver ax88179_178a
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver dm9601
    usbcore: registered new interface driver smsc75xx
    usbcore: registered new interface driver smsc95xx
    usbcore: registered new interface driver gl620a
    usbcore: registered new interface driver net1080
    usbcore: registered new interface driver plusb
    usbcore: registered new interface driver cx82310_eth
    usbcore: registered new interface driver cdc_ncm
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
    ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR SANYO protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    EBI CS1: setting up NOR flash (primary)
    mtd->oobsize=0, mtd->eccOobSize=0
    NAND_CS_NAND_XOR=00000000
    B4: NandSelect=50000200, nandConfig=18152300, chipSelect=1
    brcmnand_read_id: CS1: dev_id=01d3d195
    After: NandSelect=50000200, nandConfig=18152300
    Block size=00020000, erase shift=17
    NAND Config: Reg=38152300, chipSize=1024 MB, blockSize=128K, erase_shift=11
    busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    timing1 not adjusted: 5363444f
    timing2 not adjusted: 00000fc6
    eccLevel=15, 1Ksector=0, oob=16
    nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
    BrcmNAND mfg 1 d3 SPANSION_S30ML08GP_08 1024MB on CS1
    
    Found NAND on CS1: ACC=d7ff1010, cfg=38152300, flashId=01d3d195, tim1=5363444f, tim2=00000fc6
    BrcmNAND version = 0x0302 1024MB @00000000
    B4: NandSelect=50000200, nandConfig=38152300, chipSelect=1
    brcmnand_read_id: CS1: dev_id=01d3d195
    After: NandSelect=50000200, nandConfig=38152300
    Found NAND flash on Chip Select 1, chipSize=1024MB, usable size=1024MB, base=0
    brcmnand_scan: B4 nand_select = 50000200
    brcmnand_scan: After nand_select = 50000200
    page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX001U, max UDMA/100
    ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 AX00 PQ: 0 ANSI: 5
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    sd 0:0:0:0: [sda] 4096-byte physical blocks
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000
    ECC layout=brcmnand_oob_bch4_4k
    brcmnand_scan:  mtd->oobsize=64
    brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    -->brcmnand_default_bbt
    brcmnand_default_bbt: bbt_td = bbt_main_descr
    Bad block table Bbt0 found at page 0007ffc0, version 0x01 for chip on CS1
    Bad block table 1tbB found at page 0007ff80, version 0x01 for chip on CS1
    Adjust partition nand_entire_device size from entire device to 3ff80000 to avoid overlap with BBT reserved space
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000600000-0x00003ff00000 : "rootfs"
    0x000000000000-0x000000600000 : "kernel"
    0x000000000000-0x00003ff80000 : "nand_entire_device"
    UBI: attaching mtd6 to ubi0
    ata2: SATA link down (SStatus 4 SControl 300)
    random: nonblocking pool is initialized
    UBI: scanning is finished
    UBI: attached mtd6 (name "rootfs", size 1017 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 8136, bad PEBs: 0, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 150174683
    UBI: available PEBs: 0, total reserved PEBs: 8136, PEBs reserved for bad PEB handling: 160
    UBI: background thread "ubi_bgt0d" started, PID 53
    ALSA device list:
      No soundcards found.
    UBIFS: parse sync
    UBIFS: background thread "ubifs_bgt0_0" started, PID 54
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 1010855936 bytes (964 MiB, 7961 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID FEE9929B-8347-47BB-B7CD-9EDD9EBBD1FA, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    devtmpfs: mounted
    Freeing unused kernel memory: 224K (80808000 - 80840000)
    EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
    linuxdvb: module_layout: kernel tainted.
    Disabling lock debugging due to kernel taint
    LinuxDVB  Driver Date (28/02/15)
    DVB: registering new adapter (linuxdvb-0)
    DVBT2C Tuner is not connected  
    (NULL device *): DVB: registering adapter 0 frontend 0 (STV0900 DVB-S2)...
    internaltunerCnt 0  name linuxdvb-0 adapter0 
    DVB: registering new adapter (linuxdvb-1)
    DVBT2C Tuner is not connected  
    (NULL device *): DVB: registering adapter 1 frontend 1 (STV0900 DVB-S2)...
    internaltunerCnt 1  name linuxdvb-1 adapter1 
    DVB: registering new adapter (linuxdvb-2)
    DVB: registering new adapter (linuxdvb-3)
    DVB: registering new adapter (linuxdvb-4)
    input: UBIOX advanced remote control (native)
     as /devices/virtual/input/input0
    register dbox FP RTC device ! 
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Ich hoffe, das Problem kann damit gefixt werden.

    TschÖ

    TVR
    Geändert von Papi2000 (16.08.2015 um 23:51 Uhr) Grund: in Code gesetzt

  6. #5
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.424
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    Venton Fehler Kernel/Treiber geben wir weiter


    openATV we are open Source

    Boykott GPL violator

  7. Thanks laptan bedankten sich
  8. #6
    Anfänger
    Registriert seit
    23.12.2014
    Beiträge
    5
    Themenstarter
    Total Downloaded
    225,55 MB
    Total Downloaded
    225,55 MB
    ReceiverDankeAktivitäten
    Danke!

    TschÖ

    TVR

  9. #7
    Anfänger
    Registriert seit
    23.12.2014
    Beiträge
    5
    Themenstarter
    Total Downloaded
    225,55 MB
    Total Downloaded
    225,55 MB
    ReceiverDankeAktivitäten
    Hallo!

    Gibt es hier schon neue Erkenntnisse oder gar eine Lösung?

    TschÖ

    TVR


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 08:47 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com