Thema: Dinobot 4K SE (U5PVR Deluxe )

@birali
e2 log direk buraya sun bir yani bir yere upload yapmadan buraya ekle ?

@birali
e2 log yolla ??
yoksa kimse sorun cözemez??
sorun cözülmesini istiyorsan e2 log ekle buraya ?

not:

birali nasil yapildigini biliyorsun ?
ayni sekilde yolla ??
e2 log lazim yoksa sorun nerede anlasilmaz?

openatv 6,1 works

openatv 6.2 works too

@birali
gördügün gibi iki image de sorunsuz calisiyor openatv6.1 ve de 6.2 !
sen sunu dene media/hdd/Backup dosyan var ise onu bir sil sonra da yeni image yükle yani 05.01.2018 !
gördügün gibi calisoyor Captain de sorunsuz...

@birali
sana biraz önce yazdim?
yazdigimi okumuyorsun sen herhalde ?
upload yapma direk buraya ekle diye ?
neden yapmiyorsun anlamadim?
buradan kimse bizden indirimez?
virus var diye ?

Zitat von Apachi70

@birali
sana biraz önce yazdim?
yazdigimi okumuyorsun sen herhalde ?
upload yapma direk buraya ekle diye ?
neden yapmiyorsun anlamadim?
buradan kimse bizden indirimez?
virus var diye ?

Özür dilerim


ÿ

Code:

Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Entry boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2016 - 03:52:51

Reg Version:  v1.5.2\
Reg Time:     2017/06/09 10:48:24
Reg Name:     hi3798cv2dmc_hi3798cv200_DDR4-2133_2GB_16bitx2_4layers.reg
DDRS
Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0-dirty (ukheeham@OAK) (Dec 29 2017 - 14:55:16)

Fastboot:      Version 3.3.0
Build Date:    Dec 29 2017, 14:56:28
CPU:           Hi3798Cv200 
Boot Media:    eMMC
DDR Size:      2GB


MMC/SD controller initialization.
Tuning clk_sample[3,0],set[4],type[1]
Tuning datastrobe[1,15],set[8],type[0]
MMC/SD Card:
    MID:         0x15
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   14910M Bytes (High Capacity)
    Name:        "AGND3R"
    Chip Type:   MMC
    Version:     5.0
    Speed:       150000000Hz
    Mode:        HS400
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes
Net:   gmac0, gmac1

Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000


SDK Version: HiSTBAndroidV600R003C00SPC023_v2017050802

Security begin read RSA CRC Key in USB disk
Security no RSA CRC Key in USB disk
cv200(0)
chipid:37980200
chipType(Hi3798CV200)

led:0
mac:00:11:
enter write OTP mode!
Reserve Memory
    Start Addr:          0x7C8FE000
    Bound Addr:          0x8E80000
    Free  Addr:          0x7B4F2000
    Alloc Block:  Addr         Size
                  0x7C4FD000   0x400000
                  0x7C1FC000   0x300000
                  0x7C17B000   0x80000
                  0x7C178000   0x2000
                  0x7BE7A000   0x2FD000
                  0x7BE76000   0x3000
                  0x7B68C000   0x7E9000
                  0x7B688000   0x3000
                  0x7B4F2000   0x195000

### main_loop CHOI CONFIG_BOOTCOMMAND :bootmenu; run bootselect
(Re)start USB...
USB0:   Register 1111 NbrPorts 1
USB EHCI 1.00
scanning bus 0 for devices... cannot reset port 1!?
1 USB Device(s) found
USB0:   Register 2000140 NbrPorts 2
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1:   Register 2000140 NbrPorts 2
USB XHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 245760, count 20480 ... 20480 blocks read: OK

251609930 Bytes/s
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...
## Booting kernel from Legacy Image at 01ffbfc0 ...
   Image Name:   Linux-4.4.35
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5663632 Bytes = 5.4 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Loading Kernel Image from 0x33538048 to 0x33554432 ... OK
OK
ATAGS [0x00000100 - 0x00000430], 816Bytes

Starting kernel ...


Booting Linux on physical CPU 0x0
Linux version 4.4.35 (oe1@build1) (gcc version 6.3.0 (GCC) ) #1 SMP Tue Dec 19 09:25:36 CET 2017
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 56 MiB at 0x77c00000
cma: Reserved 4 MiB at 0x7c400000
Memory policy: Data cache writealloc
DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
PERCPU: Embedded 13 pages/cpu @df418000 s22092 r8192 d22964 u53248
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 509176
Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait  blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),20M(recovery),2M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(fastplay),8M(kernel),32M(loader),-(other) coherent_pool=2M mem=1993M mmz=ddr,0,0,56M vmalloc=500M
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14320(87%)
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 1939732K/2040832K available (8087K kernel code, 692K rwdata, 2248K rodata, 532K init, 475K bss, 39660K reserved, 61440K cma-reserved, 1440756K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
    lowmem  : 0xc0000000 - 0xe0400000   ( 516 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbe800000 - 0xbfe00000   (  22 MB)
      .text : 0xc0008000 - 0xc07ee044   (8089 kB)
      .init : 0xc0ac1000 - 0xc0b46000   ( 532 kB)
      .data : 0xc0b46000 - 0xc0bf3140   ( 693 kB)
       .bss : 0xc0bf5000 - 0xc0c6be60   ( 476 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
NR_IRQS:352
clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
Console: colour dummy device 80x30
Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
ftrace: allocating 27665 entries in 82 pages
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8280 - 0x82d8
CPU: hi3798cv200
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: update cpu_capacity 1024
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: update cpu_capacity 1024
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (12681.21 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 26, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 27, base_baud = 0) is a PL011 rev2
pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered
pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered
pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered
pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered
pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered
pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered
pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered
pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered
pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered
pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
pl061_gpio f8b2a000.gpio10: PL061 GPIO chip @0xf8b2a000 registered
pl061_gpio f8b2b000.gpio11: PL061 GPIO chip @0xf8b2b000 registered
pl061_gpio f8b2c000.gpio12: PL061 GPIO chip @0xf8b2c000 registered
hisilicon-pcie: probe of f9860000.pcie failed with error -1
hisi_iommu_ptable_addr:phy 0x1e000000    size:0x400000
hisi_iommu_err_rdaddr :phy 0x1eff8e00    size:0x200
hisi_iommu_err_wraddr :phy 0x1eff9000     size:0x200
in hisi_iommu_domain_init start 
in hisi_iommu_domain_init end 
vgaarb: loaded
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump with realtime priority
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource hisp804
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
futex hash table entries: 1024 (order: 4, 65536 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
hiahci-phy: registered new sata phy driver
brd: module loaded
loop: module loaded
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
hifmc100: no found nand device.
hifmc100: no found spi-nand device.
libphy: higmac_mii_bus: probed
libphy: higmac_mii_bus: probed
attached PHY 3 to driver Generic PHY, PHY_ID=0x1cc915
Higmac dma_sg_phy: 0x7c620000
ETH: rgmii, phy_addr=3
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registration successful
usbcore: registered new interface driver btusb
registered new interface driver himciv200
mmc0: MAN_BKOPS_EN bit is not set
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 AGND3R 14.6 GiB 
mmcblk0boot0: mmc0:0001 AGND3R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 AGND3R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 AGND3R partition 3 4.00 MiB
 mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(deviceinfo) p5(baseparam) p6(pqparam) p7(logo) p8(logobak) p9(fastplay) p10(kernel) p11(loader) p12(other)
mmc1: new high speed SDHC card at address 1234
mmcblk1: mmc1:1234 SA16G 14.6 GiB 
 mmcblk1: p1 p2
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
usbcore: registered new interface driver snd-usb-audio
oprofile: no performance counters
oprofile: using timer interrupt.
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 10
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
irq_affinity: irq_set_affinity failed. irq:72 cpuid:2
irq_affinity: irq_set_affinity failed. irq:69 cpuid:2
irq_affinity: irq_set_affinity failed. irq:68 cpuid:2
irq_affinity: irq_set_affinity failed. irq:67 cpuid:2
irq_affinity: irq_set_affinity failed. irq:66 cpuid:2
ALSA device list:
  No soundcards found.
EXT4-fs (mmcblk1p1): recovery complete
EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:33.
devtmpfs: mounted
Freeing unused kernel memory: 532K (c0ac1000 - c0b46000)
This architecture does not have kernel memory protection.

INIT: version 2.88 booting

dinobot u5pvr start!!!
Load hi_media.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:22:42])
Load hi_mmz.ko success.		(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:22:44])
virtual device initialization.
Load hi_common.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:22:47])
Load hi_pq.ko success.		(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:24])
Load hi_hdmi.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:25:46])
Load hi_vou.ko success.     	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:27:37])
Load hi_gpio.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:25:07])
Load hi_gpioi2c.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:00])
Load hi_i2c.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:01])
Load hi_tde.ko success.		(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:45])
Load hi_otp.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:16])
Load hi_demux.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:25])
Load hi_adec.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:02])
Load hi_vfmw.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:27:04])
Load hi_vpss.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:27:59])
Load hi_vdec.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:53])
sec os HAL_Cipher_EnableMmu...
Load hi_cipher.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:24])
Load hi_adsp.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:03])
Load hi_aiao.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:11])
Load hi_pvr.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:41])
Load hi_tuner.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:38])
Load hi_fb.ko success.		(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:25:58])
mali f9200000.gpu: GPU identified as 0x0720 r1p1 status 0
mali f9200000.gpu: Probed as mali0
misc hi_dbe: hi_dbe ready
Load hi_ir.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:02])
Load hi_jpegdec.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:06])
Load hi_jpegenc.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:09])
Load hi_png.ko success.		(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:21])
Load hi_advca.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:05])
Load hi_venc.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:59])
Load hi_aenc.ko success.  	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:24:11])
Load hi_keyled.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:10])
Load hi_sci.ko success.   	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:41])
Load hi_vi.ko success.		(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:27:09])
Load hi_pmoc.ko success.	(SDK_VERSION:[HiSTBLinuxV100R005C00SPC042_20170312] Build Time:[Dec  1 2017, 13:26:18])
ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci-hcd f98b0000.xhci: xHCI Host Controller
xhci-hcd f98b0000.xhci: new USB bus registered, assigned bus number 5
xhci-hcd f98b0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
xhci-hcd f98b0000.xhci: irq 38, io mem 0xf98b0000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci-hcd f98b0000.xhci: xHCI Host Controller
xhci-hcd f98b0000.xhci: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3016.7.1.2.3 [Flags: R/W MODULE].
Built against headers 4.4.35_hi3798cv2x #1 SMP Mon Feb 13 16:41:58 CST 2017 arm
Running on kernel 4.4.35 #1 SMP Tue Dec 19 09:25:36 CET 2017 armv7l
WARNING: Running kernel does not match configured kernel headers the driver was built with!  The driver needs to be rebuilt with the correct kernel headers!
random: nonblocking pool is initialized
DVB: registering new adapter (firedtv)
(NULL device *): DVB: registering adapter 0 frontend 0 (HISI 3136 DVB-S)...
(NULL device *): DVB: registering adapter 0 frontend 1 (AvLink DVBT2/C)...
usb 5-1: new high-speed USB device number 2 using xhci-hcd
fdtv_dvb_register success
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
init_dboxdev success!!!!!!!!!
./load: line 57: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: No such file or directory
./load: line 58: /sys/devices/system/cpu/cpufreq/interactive/timer_rate: No such file or directory
./load: line 59: /sys/devices/platform/soc/f9200000.gpu/devfreq/f9200000.gpu/min_freq: No such file or directory
./load: line 60: /sys/devices/platform/soc/f9200000.gpu/devfreq/f9200000.gpu/max_freq: No such file or directory
Starting fake hwclock: loading system time.
Fri Jan  5 01:19:20 UTC 2018
usb 2-1: new full-speed USB device number 2 using ohci-platform
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
input: Logitech USB Receiver as /devices/platform/soc/f9880000.ohci/usb2/2-1/2-1:1.0/0003:046D:C52B.0001/input/input1
hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-f9880000.ohci-1/input0
input: Logitech USB Receiver as /devices/platform/soc/f9880000.ohci/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input2
hid-generic 0003:046D:C52B.0002: input,hiddev0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-f9880000.ohci-1/input1
hid-generic 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-f9880000.ohci-1/input2
cat: can't open '/sys/block/mmcblk1/device/model': No such file or directory
find: /media/mmc1: No such file or directory
cat: can't open '/sys/block/mmcblk1/device/model': No such file or directory
mkdir: can't create directory '/media/mmc1': File exists
UDF-fs: warning (device mmcblk1p2): udf_fill_super: No partition found (2)
NTFS signature is missing.
Failed to mount '/dev/mmcblk1p2': Invalid argument
The device '/dev/mmcblk1p2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
UDF-fs: warning (device mmcblk1p2): udf_fill_super: No partition found (2)
yaffs: dev is 187695138 name is "mmcblk1p2" rw
yaffs: passed flags ""
yaffs: dev is 187695138 name is "mmcblk1p2" rw
yaffs: passed flags ""
tntfs info (device mmcblk1p2, pid 1265): ntfs_fill_super(): fail_safe is enabled.
mount: mounting /dev/mmcblk1p2 on /media/mmcblk1p2 failed: Invalid argument
/etc/udev/mount-helper.sh: line 231: mount.exfat: command not found
SGI XFS with ACLs, security attributes, realtime, no debug enabled
daemon on duty!
EXT4-fs (mmcblk1p1): re-mounted. Opts: data=ordered
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
cat: can't open '/sys/block/mmcblk1/device/model': No such file or directory
mkdir: can't create directory '/media/mmc1': File exists
UDF-fs: warning (device mmcblk1p2): udf_fill_super: No partition found (2)
stGain.bLinearMode 1 stGain.s32Gain 100
enSpdifMode 0 enHdmiMode 0
[HIADP_Tuner_GetConfig] TunerId=0, TunerType=10, TunerAddr=0xc6, I2cChannel=1, DemodAddr=0xb4, DemodType=264, OutputMode=3
****************************************************************************
TunerId=0, TunerType=10, TunerAddr=0xc6, I2cChannel=1, DemodAddr=0xb4, 
DemodType=264,SigType:2,OutputMode:3,ResetGpioNo:67
****************************************************************************
NTFS signature is missing.
Failed to mount '/dev/mmcblk1p2': Invalid argument
The device '/dev/mmcblk1p2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

 --- Get HDMI event: HOTPLUG. --- 
[HIADP_Tuner_GetConfig] TunerId=1, TunerType=24, TunerAddr=0xc0, I2cChannel=2, DemodAddr=0x28, DemodType=268, OutputMode=3
****************************************************************************
TunerId=1, TunerType=24, TunerAddr=0xc0, I2cChannel=2, DemodAddr=0x28, 
DemodType=268,SigType:8,OutputMode:3,ResetGpioNo:60
****************************************************************************
[00:57:54:879 ERROR-HI_TUNER]:AVL68XX_Init[171]:Avl68xx{1,2,28}{24,8}
[00:57:54:885 ERROR-HI_TUNER]:Avl68xx_Initialize[131]:Avl68xx:Initialize{1,2}
[00:57:54:892 ERROR-HI_I2C]:I2C_DRV_Write[192]:i2c_transfer failed:-6
[00:57:54:899 ERROR-HI_I2C]:I2C_DRV_Read[254]:i2c_transfer failed:-6
[00:57:54:905 ERROR-HI_TUNER]:Avl68xx_Initialize[135]:Avl68xx::AVL_Initialize Failed{4}
[00:57:54:912 ERROR-HI_TUNER]:AVL68XX_Init[192]:Avl68xx:failure
[HIADP_Tuner_GetConfig] TunerId=0, TunerType=10, TunerAddr=0xc6, I2cChannel=1, DemodAddr=0xb4, DemodType=264, OutputMode=3
[HIADP_Tuner_GetConfig] TunerId=1, TunerType=24, TunerAddr=0xc0, I2cChannel=2, DemodAddr=0x28, DemodType=268, OutputMode=3
HA_AUDIO_ID_PCM -->0x81000000
HA_AUDIO_ID_MP2 -->0x20000002
HA_AUDIO_ID_MP3 -->0x21f00003
HA_AUDIO_ID_AAC -->0x80020001
HA_AUDIO_ID_BLYRAYLPCM -->0x81210021
HA_AUDIO_ID_COOK -->0x80160009
HA_AUDIO_ID_DRA -->0x80340007
HA_AUDIO_ID_WMA9STD -->0x21f00006
HA_AUDIO_ID_AMRNB -->0x81600100
HA_AUDIO_ID_AMRWB -->0x81610110
HA_AUDIO_ID_G711 -->0x21900102
HA_AUDIO_ID_G722 -->0x21910105
HA_AUDIO_ID_G726 -->0x21930106
HA_AUDIO_ID_ADPCM -->0x21300107
HA_AUDIO_ID_VOICE -->0x21f00108
HA_AUDIO_ID_TRUEHD -->0x202f0008
HA_AUDIO_ID_AC3PASSTHROUGH -->0x81f00055
HA_AUDIO_ID_DTSPASSTHROUGH -->0x80041025
HA_AUDIO_ID_DOLBY_PLUS -->0x81f01010
HA_AUDIO_ID_DOLBY_TRUEHD -->0x202f1011
HA_AUDIO_ID_MS12_DDP -->0x20351012
HA_AUDIO_ID_MS12_AAC -->0x20361013
HA_AUDIO_ID_MS12_AC4 -->0x20371014
HA_AUDIO_ID_DTSHD -->0x20041020
HA_AUDIO_ID_DTSM6 -->0x20041030
HA_AUDIO_ID_FFMPEG_DECODE -->0x81f003ff
HA_AUDIO_ID_FFMPEG_WMAPRO -->0x8028041f
HA_AUDIO_ID_CUSTOM_0 -->0x81f00400
HA_AUDIO_ID_CUSTOM_1 -->0x81f00401
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AC33.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSS.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.TRUEHD.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AMRWB.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.Mp3.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.MP2.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AAC.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DOLBYTRUEHD.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DRA.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.TRUEHDPASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AMRNB.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.WMA.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.COOK.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.G711.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSHD.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSM6.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSPASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AC3PASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.PCM.decode.so success
avApartMent 18d5be0

run keyled demo success
send buf len 4-327680
received buf len 4-327680
hisi_platform_init success
isValid: 1: ok
00:11:ad:80:a9:cb
wrong 0011ad80a9cb pls check!
--------------------macAuth is -1
UDF-fs: warning (device mmcblk1p2): udf_fill_super: No partition found (2)
yaffs: dev is 187695138 name is "mmcblk1p2" rw
yaffs: passed flags ""
yaffs: dev is 187695138 name is "mmcblk1p2" rw
yaffs: passed flags ""
tntfs info (device mmcblk1p2, pid 1534): ntfs_fill_super(): fail_safe is enabled.
mount: mounting /dev/mmcblk1p2 on /media/mmcblk1p2 failed: Invalid argument
/etc/udev/mount-helper.sh: line 231: mount.exfat: command not found
Starting stb hwclock: loading system time.

INIT: Entering runlevel: 3

Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
hi_gmac_v200 f9841000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 192.168.2.137...
Lease of 192.168.2.137 obtained, lease time 3600
/etc/udhcpc.d/50default: Adding DNS 192.168.2.1
done.
Starting rpcbind daemon...done.
Fuse filesystem already available.
Mounting fuse control filesystem.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
Starting automount: done.
creating NFS state directory: done
starting statd: done
Starting internet superserver: inetd.
Starting Samba: smbd nmbd wsdd.
Starting Shell In A Box server: shellinabox.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
* starting FTP Server: vsftpd... done.
Starting crond: OK
Running local boot scripts (/etc/rc.local).
line  1791 ?        00:00:00 showiframe

exist pid 1791
save pid 1350
daemon on duty!
stGain.bLinearMode 1 stGain.s32Gain 100
enSpdifMode 0 enHdmiMode 0
[HIADP_Tuner_GetConfig] TunerId=0, TunerType=10, TunerAddr=0xc6, I2cChannel=1, DemodAddr=0xb4, DemodType=264, OutputMode=3
****************************************************************************
TunerId=0, TunerType=10, TunerAddr=0xc6, I2cChannel=1, DemodAddr=0xb4, 
DemodType=264,SigType:2,OutputMode:3,ResetGpioNo:67
****************************************************************************

 --- Get HDMI event: HOTPLUG. --- 
[HIADP_Tuner_GetConfig] TunerId=1, TunerType=24, TunerAddr=0xc0, I2cChannel=2, DemodAddr=0x28, DemodType=268, OutputMode=3
****************************************************************************
TunerId=1, TunerType=24, TunerAddr=0xc0, I2cChannel=2, DemodAddr=0x28, 
DemodType=268,SigType:8,OutputMode:3,ResetGpioNo:60
****************************************************************************
[00:58:02:234 ERROR-HI_TUNER]:AVL68XX_Init[171]:Avl68xx{1,2,28}{24,8}
[00:58:02:240 ERROR-HI_TUNER]:Avl68xx_Initialize[131]:Avl68xx:Initialize{1,2}
[00:58:02:247 ERROR-HI_I2C]:I2C_DRV_Write[192]:i2c_transfer failed:-6
[00:58:02:254 ERROR-HI_I2C]:I2C_DRV_Read[254]:i2c_transfer failed:-6
[00:58:02:260 ERROR-HI_TUNER]:Avl68xx_Initialize[135]:Avl68xx::AVL_Initialize Failed{4}
[00:58:02:268 ERROR-HI_TUNER]:AVL68XX_Init[192]:Avl68xx:failure
[HIADP_Tuner_GetConfig] TunerId=0, TunerType=10, TunerAddr=0xc6, I2cChannel=1, DemodAddr=0xb4, DemodType=264, OutputMode=3
[HIADP_Tuner_GetConfig] TunerId=1, TunerType=24, TunerAddr=0xc0, I2cChannel=2, DemodAddr=0x28, DemodType=268, OutputMode=3
HA_AUDIO_ID_PCM -->0x81000000
HA_AUDIO_ID_MP2 -->0x20000002
HA_AUDIO_ID_MP3 -->0x21f00003
HA_AUDIO_ID_AAC -->0x80020001
HA_AUDIO_ID_BLYRAYLPCM -->0x81210021
HA_AUDIO_ID_COOK -->0x80160009
HA_AUDIO_ID_DRA -->0x80340007
HA_AUDIO_ID_WMA9STD -->0x21f00006
HA_AUDIO_ID_AMRNB -->0x81600100
HA_AUDIO_ID_AMRWB -->0x81610110
HA_AUDIO_ID_G711 -->0x21900102
HA_AUDIO_ID_G722 -->0x21910105
HA_AUDIO_ID_G726 -->0x21930106
HA_AUDIO_ID_ADPCM -->0x21300107
HA_AUDIO_ID_VOICE -->0x21f00108
HA_AUDIO_ID_TRUEHD -->0x202f0008
HA_AUDIO_ID_AC3PASSTHROUGH -->0x81f00055
HA_AUDIO_ID_DTSPASSTHROUGH -->0x80041025
HA_AUDIO_ID_DOLBY_PLUS -->0x81f01010
HA_AUDIO_ID_DOLBY_TRUEHD -->0x202f1011
HA_AUDIO_ID_MS12_DDP -->0x20351012
HA_AUDIO_ID_MS12_AAC -->0x20361013
HA_AUDIO_ID_MS12_AC4 -->0x20371014
HA_AUDIO_ID_DTSHD -->0x20041020
HA_AUDIO_ID_DTSM6 -->0x20041030
HA_AUDIO_ID_FFMPEG_DECODE -->0x81f003ff
HA_AUDIO_ID_FFMPEG_WMAPRO -->0x8028041f
HA_AUDIO_ID_CUSTOM_0 -->0x81f00400
HA_AUDIO_ID_CUSTOM_1 -->0x81f00401
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AC33.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSS.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.TRUEHD.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AMRWB.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.Mp3.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.MP2.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AAC.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DOLBYTRUEHD.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DRA.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.TRUEHDPASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AMRNB.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.WMA.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.COOK.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.G711.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSHD.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSM6.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSPASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AC3PASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.PCM.decode.so success
avApartMent 1210bd8

run keyled demo success
send buf len 4-327680
received buf len 4-327680
hisi_platform_init success
isValid: 1: ok
00:11:
wrong 0011ad80a9cb pls check!
--------------------macAuth is -1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
dbox_oled_ioctl 4117
dvbs_set_tone 1
dvbs_set_voltage: ??
dvbs_set_tone 1
dvbs_set_voltage: ??
dvbs_set_voltage: ??
enigma2 is the main pvr application... adjust oom score!
/sbin/stb-hwclock: line 24: /proc/stb/fp/rtc: No such file or directory
aspect in setting-->16:9
policy in setting-->panscan
policy2 in setting-->letterbox