Ergebnis 1 bis 3 von 3
  1. #1
    Mitglied
    Registriert seit
    08.09.2013
    Beiträge
    34
    Thanks (gegeben)
    25
    Thanks (bekommen)
    3
    Total Downloaded
    466,41 MB
    Total Downloaded
    466,41 MB
    ReceiverDanke

    Script ausführen per Fernbedienung?

    Hallo Gemeinde,

    wie lässt sich das Modul im Schacht oben/unten zurücksetzen ohne sich durch die GUI zu hangeln?
    Das Skript könnte ja dann auf eine Taste gelegt werden.
    Habe eine GB Quad Plus HD mit OpenAtv 6.3.

    Danke schon mal im Voraus.

    •   Alt Advertising

       

  2. #2
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    24.824
    Thanks (gegeben)
    4679
    Thanks (bekommen)
    9077
    Total Downloaded
    596,61 MB
    Total Downloaded
    596,61 MB
    ReceiverDanke
    Box 1:
    GB Q4K-SC / UE4K-SC / UE4K-C
     
     
    Box 2:
    GigaBlue Q-SSC / Q+-SSC
     
     
    Box 3:
    DM900uhd-SS / Vu+Duo
     
     
    Box 4:
    ZGemma H7/H9 SF8008
     
     
    Box 5:
    diverse andere . . .
     
     
    Formuliere deine Frage lieber um, sonst entsorge ich den Post.

    openATV und CIPLUS
    und
    Softcams, EMUS, KEYS, CS und Anleitungen
    Grüßle
    Ralf
    ---------------------------------------------
    Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
    Astra 19.2E UniCable & KabelBW, oATV/teamBlue
    (u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  3. #3
    Pike_Bishop
    Gast
    Das is nicht so schwer, kannst dir da was abgucken;
    Code:
    #!/bin/bash 
    
    ## Variablen ##
    BOXIP=http://localhost
    WGET=/usr/bin/wget
    TMP=/tmp
    LOGFILE=$TMP/tvspielfilm_2015.log
    
    
    $WGET -q -O - $BOXIP/web/remotecontrol?command=174
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=174
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=174
    
    
    # Der Job beginnt
    # Generelles Logging
    exec 3>&1 4>&2
    trap 'exec 2>&4 1>&3' 0 1 2 3
    exec 1>$LOGFILE 2>&1
    
    
    STARTDATE="$(date +%a.%d.%b.%Y-%H:%M)" && echo -e "\n\nJOB START -> $STARTDATE\n\n"
    sleep 1
    
    
    $WGET -q -O - $BOXIP/web/remotecontrol?command=365
    sleep 1
    $WGET -q -O - $BOXIP/web/remotecontrol?command=108
    $WGET -q -O - $BOXIP/web/remotecontrol?command=108
    $WGET -q -O - $BOXIP/web/remotecontrol?command=108
    $WGET -q -O - $BOXIP/web/remotecontrol?command=108
    $WGET -q -O - $BOXIP/web/remotecontrol?command=108
    $WGET -q -O - $BOXIP/web/remotecontrol?command=108
    $WGET -q -O - $BOXIP/web/remotecontrol?command=352
    
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=139
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=352
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=352
    #sleep 1
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=108
    #$WGET -q -O - $BOXIP/web/remotecontrol?command=352
    
    
    exit
    Ich hab das hier für TV-Spielfilm und zwar führt das Script ganz einfach die Tastenbefehle aus die nötig sind um den Eintrag im TV-Spilefilm mit 20:15 zu starten
    , das kannst für alles andere genauso verwenden, musst nur wissen welche Tasten wie oft usw. gedrückt gehören um das per Fernbedienung zu erreichen was du tun willst.
    Dazu brauchst noch die Liste mit den Tastenbefehlen hier;
    enigma2/keyids.py at 6.3 * openatv/enigma2 * GitHub


    Das Script legst dann mittels Hotkey auf ne Taste nach Wahl.
    Das läuft dann ab wie bei nem Macro, du siehst also wie das Menü gestartet wird, zu den Einstellungen gescrollt wird, usw, bis da hin was du halt haben willst und das dann startet.
    Bisschen Erklärung noch dazu;
    Den Eintrag;
    Code:
    $WGET -q -O - $BOXIP/web/remotecontrol?command=174
    brauchst einmal ganz oben im Script wennst es per ner Taste über Hotkey startest, denn 174 ist die Exit Taste und so wird erstmal das Fenster zur Konsole geschlossen (stört so ja nur).
    Weiters kann ich mit Key 365 starten da ich das TV Spilefilm Plugin eh auf der EPG Taste liegen habe (so is der Weg kürzer als über Menü -> Erweiterungen usw..), danach hab ich
    6x den Key 108 der steht für die Taste im Steuerkreuz nach unten (ich scroll also zum Eintrag 20:15) und mit Key 352 starte ich (is die ok Taste) TV-Spilefilm 20:15

    EDIT !
    Klar es wär schon schöner wenn man das was du willst direkt mit nem Script tun könnte also in dem Fall im Script einfach den Befehl zum Zurücksetzen des CI Moduls
    , aber da hab ich leider keine Ahnung, deshalb eben die obige Variante bei der auch durch die Gui gehangelt wird, aber das macht wenigstens das Script für einen.


    Grüsse
    Pike
    Geändert von Pike_Bishop (25.05.2019 um 21:32 Uhr)

  4. Thanks DaGuckste bedankten sich

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 16:02 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com