Thanks: 0
Ergebnis 1 bis 8 von 8
Thema: Sezam Marvel Tot ?
-
27.03.2014, 19:45 #1
- Registriert seit
- 06.04.2013
- Ort
- AT Wien
- Beiträge
- 396
- Thanks (gegeben)
- 132
- Thanks (bekommen)
- 19
- Total Downloaded
- 39,22 MB
- Total Downloaded
- 39,22 MB
Box 1:Gigablue QUAD UHD 4KBox 2:Zgemma h9 twinBox 3:Mutant HD2400Sezam Marvel Tot ?
HI
Die Sezam Marvel hat anscheinend den Geist aufgegeben.
Beeim Einschalten tut sich nichts mehr.
Netzspannung, Anschlüsse sind Ok.
Sie ist in den letzten Tagen absolut brav gelaufen und plötzlich TOT.
Naja war halt ein teurer Versuch- Kismet.
RuPo2
-
Advertising
-
27.03.2014, 19:57 #2
- Registriert seit
- 07.04.2013
- Ort
- OpenATV - Wien
- Beiträge
- 153
- Thanks (gegeben)
- 3636
- Thanks (bekommen)
- 3542
- Total Downloaded
- 51,16 MB
- Total Downloaded
- 51,16 MB
Hast Du serielles Kabel, dann mal damit den Startversuch loggen
-
27.03.2014, 19:58 #3
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
per serial auch keine Ausgabe mehr nichts ?
openATV we are open Source
Boykott GPL violator
-
27.03.2014, 20:28 #4
- Registriert seit
- 06.04.2013
- Ort
- AT Wien
- Beiträge
- 396
- Thanks (gegeben)
- 132
- Thanks (bekommen)
- 19
- Total Downloaded
- 39,22 MB
- Total Downloaded
- 39,22 MB
ThemenstarterBox 1:Gigablue QUAD UHD 4KBox 2:Zgemma h9 twinBox 3:Mutant HD2400Sezam Marvel einmal gebootet und wieder Tot
Ist zwei Stunden in der Ecke gestanden und hat EINMAL gebootet
jetzt wieder TOT
Code:~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.27 21:04:57 =~=~=~=~=~=~=~=~=~=~=~= BCM74250012 M0 M1 0 SHMOO VER 1.17 MCB PKID 20130702 003B6000 003B0000 0496203E 00001C00 S300001F7 00001660 +00000004 >00000166 t00000025 0000003C @00000096 ^0000001A @00000096 ^0000001A RDEN W0 00000024 00000009 00000000 RDEN W1 0000002A 00000001 00000000 RDLY W0 00000003 RDLY W1 00000003 RDQS W0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 01 --------++++++++++++++++++++++X++++++++++++++++++++++----------- 02 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 03 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 04 -+++++++++++++++++++++++X++++++++++++++++++++++----------------- 05 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 06 ----+++++++++++++++++++++++++X++++++++++++++++++++++++---------- 07 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++---- 08 --+++++++++++++++++++++++++X+++++++++++++++++++++++++----------- 09 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------- 10 -----+++++++++++++++++++++++++X++++++++++++++++++++++++--------- 11 ---+++++++++++++++++++++++++X++++++++++++++++++++++++----------- 12 ---+++++++++++++++++++++++++X++++++++++++++++++++++++----------- 13 -+++++++++++++++++++++++++X+++++++++++++++++++++++++------------ 14 ----++++++++++++++++++++++++X++++++++++++++++++++++++----------- 15 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- P W0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 01 ----++++++++++++++++++++++++X++++++++++++++++++++++++----------- 02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ 03 -----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 04 +++++++++++++++++++++++X+++++++++++++++++++++++----------------- 05 --++++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 06 --++++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 07 ------+++++++++++++++++++++++++++X++++++++++++++++++++++++++---- 08 ++++++++++++++++++++++++++X++++++++++++++++++++++++++----------- 09 --+++++++++++++++++++++++++++X+++++++++++++++++++++++++++------- 10 -+++++++++++++++++++++++++++X++++++++++++++++++++++++++--------- 11 ++++++++++++++++++++++++++X++++++++++++++++++++++++++----------- 12 -++++++++++++++++++++++++++X+++++++++++++++++++++++++----------- 13 +++++++++++++++++++++++++X+++++++++++++++++++++++++------------- 14 -++++++++++++++++++++++++++X+++++++++++++++++++++++++----------- 15 ---+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--- N W0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 01 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------ 02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ 03 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------ 04 ++++++++++++++++++++++++++X++++++++++++++++++++++++++----------- 05 ---++++++++++++++++++++++++++X+++++++++++++++++++++++++--------- 06 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 07 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++- 08 -+-+++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 09 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 10 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 11 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++-------- 12 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++-------- 13 -++++++++++++++++++++++++++X++++++++++++++++++++++++++---------- 14 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 15 -****************************************** ReShmoo MEMC1 ReShmoo MEMC0 Enabling NAND flash at CS1: MT29F16G08CBACA(DEVICE ID=0x2C48044A), ECC Level=12, Spare Area Size=27 Size = 4MB, Sector Size 65536, Page Size 256 CPU speed: 1305MHz DDR Frequency: 796 MHz DDR Mode: DDR3 Total memory(MEMC 0): 1024MB MEMC 0 DDR Width: 32 Total memory(MEMC 1): 1024MB MEMC 1 DDR Width: 32 Boot Device: SPI Total flash: 4MB RTS VERSION: 20120919205446_7425_dual_encode ETH0_PHY: RGMII_NO_ID ETH0_MDIO_MODE: 1 ETH0_SPEED: 1000 ETH0_PHYADDR: probe Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub cfe_lcd_init USB: New device connected to bus 3 hub 1 port 1[J USB: Resetting device on bus 3 hub 1 port 1[J USB: Locating Class FF Vendor 148F Product 5372: Driver not found. lcd_init CFE initialized. [FLASH-TOOL] Searching update files... USB device matching <USB Disk> not found! Executing FORCE STARTUP... Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=128M@64M bmem=384M@512M memc1=640M Loading: 0x80001000/7009792 0x806b0600/159664 Entry address is 0x8052d6b0 Starting program at 0x8052d6b0 Linux version 3.3.8-2.0 (oa2@builder) (gcc version 4.8.2 (GCC) ) #1 SMP Tue Mar 18 14:19:00 CET 2014 Fetching vars from bootloader... found 15 vars. Options: moca=0 sata=1 pcie=1 usb=1 Using 1024 MB + 1024 MB RAM (from CFE) bootconsole [early0] enabled CPU revision is: 00025a11 (Brcm4380) FPU revision is: 00130001 Determined physical RAM map: memory: 10000000 @ 00000000 (usable) memory: 30000000 @ 20000000 (usable) memory: 28000000 @ 90000000 (usable) bmem: adding 128 MB RESERVED region at 64 MB (0x08000000@0x04000000) bmem: adding 384 MB RESERVED region at 512 MB (0x18000000@0x20000000) Zone PFN ranges: Normal 0x00000000 -> 0x00050000 HighMem 0x00050000 -> 0x000b8000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000000 -> 0x00010000 0: 0x00020000 -> 0x00050000 0: 0x00090000 -> 0x000b8000 PERCPU: Embedded 7 pages/cpu @81e12000 s5632 r8192 d14848 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 420096 Kernel command line: ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=128M@64M bmem=384M@512M memc1=640M PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. Memory: 1157380k/1048576k available (5391k kernel code, 546556k reserved, 1262k data, 192k init, 655360k highmem) Hierarchical RCU implementation. NR_IRQS:160 Measuring MIPS counter frequency... Detected MIPS clock frequency: 1305 MHz (163.136 MHz counter) Console: colour dummy device 80x25 Calibrating delay loop... 869.37 BogoMIPS (lpj=434688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 SMP: Booting CPU1... CPU revision is: 00025a11 (Brcm4380) FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. SMP: CPU1 is running Brought up 2 CPUs devtmpfs: initialized bmem: adding extra 384 MB RESERVED region at 2944 MB (0x18000000@0xb8000000) NET: Registered protocol family 16 USB0: power enable is active low; overcurrent is active low USB1: power enable is active low; overcurrent is active low bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource wktmr NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.18) msgmni has been set to 980 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63) is a 16550A serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64) is a 16550A loop: module loaded ahci: SSS flag set, parallel bus scan disabled ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode ahci strict-ahci.0: flags: ncq sntf stag clo slum part scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42 ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42 brcmstb_nand: NAND controller driver is loaded Found PHY at Address 4 Config GPHY through MDIO ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ehci-brcm ehci-brcm.2: Broadcom STB EHCI ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3 ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300 ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected ehci-brcm ehci-brcm.3: Broadcom STB EHCI ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4 ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500 ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5 ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6 ata2: SATA link down (SStatus 0 SControl 300) ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600 hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected ohci-brcm ohci-brcm.2: Broadcom STB OHCI ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7 ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400 hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected ohci-brcm ohci-brcm.3: Broadcom STB OHCI ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8 ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600 usb 4-1: new high-speed USB device number 2 using ehci-brcm hub 8-0:1.0: USB hub found hub 8-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver lirc_dev: IR Remote Control driver registered, major 254 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR SANYO protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR LIRC bridge handler initialized usbcore: registered new interface driver btusb sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lib80211: common routines for IEEE802.11 drivers PM: CP0 COUNT/COMPARE frequency does not depend on divisor EBI CS1: setting up NAND flash (primary) ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0x48 (Micron MT29F16G08CBACAWP) ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0x48 (Micron MT29F16G08CBACAWP) brcmnand brcmnand.0: 2048MiB total, 1024KiB blocks, 4KiB pages, 27B OOB, 8-bit, BCH-24 (1KiB sector) Bad block table found at page 524032, version 0x01 Bad block table found at page 523776, version 0x01 nand_read_bbt: bad block at 0x000005a00000 nand_read_bbt: bad block at 0x000005b00000 Creating 3 MTD partitions on "brcmnand.0": 0x000000700000-0x000080000000 : "rootfs" 0x000000700000-0x000080000000 : "rootfs(redundant)" 0x000000000000-0x000000700000 : "kernel" EBI CS0: setting up SPI flash spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address m25p80 spi0.0: found en25q32b, expected m25p80 m25p80 spi0.0: en25q32b (4096 Kbytes) Creating 6 MTD partitions on "spi0.0": 0x000000000000-0x000000080000 : "cfe" 0x000000080000-0x000000280000 : "splash" 0x000000280000-0x000000300000 : "macadr" 0x000000300000-0x000000380000 : "nvram" 0x000000380000-0x0000003c0000 : "bootconfig" 0x0000003c0000-0x000000400000 : "facconfig" EBI CS3: setting up NOR flash physmap platform flash device: 00002000 at 14000000 UBI: attaching mtd0 to ubi0 UBI: physical eraseblock size: 1048576 bytes (1024 KiB) UBI: logical eraseblock size: 1040384 bytes UBI: smallest flash I/O unit: 4096 UBI: VID header offset: 4096 (aligned 4096) UBI: data offset: 8192 UBI: max. sequence number: 474 UBI: attached mtd0 to ubi0 UBI: MTD device name: "rootfs" UBI: MTD device size: 2041 MiB UBI: number of good PEBs: 2035 UBI: number of bad PEBs: 6 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 2035 UBI: number of PEBs reserved for bad PEB handling: 20 UBI: max/mean erase counter: 2/1 UBI: image sequence number: 1178341671 UBI: background thread "ubi_bgt0d" started, PID 59 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 2053718016 bytes (2005584 KiB, 1958 MiB, 1974 LEBs) UBIFS: journal size: 12550144 bytes (12256 KiB, 11 MiB, 13 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:14. devtmpfs: mounted Freeing unused kernel memory: 192k freed INIT: version 2.88 booting EXT4-fs (sda1): recovery complete EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [NEXUS_Platform_P_InitBoard] LCD device(14000000) => 94000000 [platform_i2c_mutex_init] ... fb0: brcmfb frame buffer device [MCU] ver : 2.00.34 [MCU] model : INI900RU_OLED [MCU] power : SWITCH input: dreambox front panel as /devices/virtual/input/input0 input: dreambox advanced remote control (native) as /devices/virtual/input/input1 DVB: registering new adapter (dvb) DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)... DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)... usb 4-1: reset high-speed USB device number 2 using ehci-brcm phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset detected. phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. usbcore: registered new interface driver rt2800usb rtusb init rt2870 ---> === pAd = e5ac6000, size = 511144 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 usbcore: registered new interface driver rt2870 [ioctlVideo_SelectSource] stream_source (0 -> 1) ALSA: Restoring mixer settings... /usr/sbin/alsactl: load_state:1729: No soundcards found... Star[ioctlVideo_SelectSource] stream_source (1 -> 0) ting portmap daemon... net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 vm.dirty_writeback_centisecs = 300 vm.dirty_background_ratio = 1 vm.min_free_kbytes = 8192 vm.dirty_ratio = 60 vm.swappiness = 30 INIT: Entering runlevel: 3 Configuring network interfaces... done. NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready Starting system message bus: dbus. Starting Dropbear SSH server: dropbear. Starting rpcbind daemon...rpcbind: cannot bind * on udp: Address already in use rpcbind: cannot bind tcp: Address already in use done. rpcbind: cannot get uid of '': Success Mounting remote filesystems... creating NFS state directory: done starting statd: done Starting automount: automount: program is already running. done. starting Busybox Periodic Command Scheduler: crond... done. crond[409]: crond: crond (busybox 1.21.1) started, log level 8 Starting internet superserver: inetd. starting 8 nfsd kernel threads: rpc.nfsd: Setting version failed: errno 22 (Invalid argument) xs_local_setup_socket: unhandled error (146) connecting to /var/run/rpcbind.sock svc: failed to register lockdv1 RPC service (errno 124). done starting mountd: done Starting Samba: smbd nmbd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. [ioctlVideo_SelectSource] stream_source (0 -> 1) [ioctlVideo_SelectSource] stream_source (1 -> 0) PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager BCM accel interface not available - Inappropriate ioctl for device + (9) GFBDC 10800k video mem - double buffering available! 7560kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC found OLED display! lcd buffer 0x785fc8 16384 bytes, stride 256 LCD resolution: 256 x 64 x 8 (stride: 256) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "dreambox front panel" is a remotecontrol Input device "dreambox advanced remote control (native)" is a mouse Found 2 input devices. + (22) Hdmi CEC driver eHdmiCEC: detected physical address change: 1000 --> 0000 eHdmiCEC: send message 84 00 00 03 + (30) eActionMap + (35) CI Slots scanning for common interfaces.. CI Slot 0 setSource(0) CI Slot 1 setSource(0) eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) eDVBCIInterfaces->setInputSource(2, 2) eDVBCIInterfaces->setInputSource(3, 3) done, found 2 common interface slots + (35) CA handler + (36) Stream server + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) loaded 117 channels/transponders and 1664 services scanning for frontends.. opening frontend 0 close frontend 0 opening frontend 1 close frontend 1 found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png found 6 spinner! executing main setIoPrio best-effort level 3 ok [CIMAX] init done. Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... new Harddisk sda -> /dev/sda -> /dev/sda [Harddisk] enumerating network mounts... Reading satellites.xml main thread is non-idle! display spinner! sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: single slot: 1 configmode: simple diseqcmode: single sec config completed [NimManager] slot name=DVB-S2 NIM [NimManager] multiType = True [NimManager] slot name=DVB-S2 NIM [NimManager] multiType = True [Picon] adding path: /usr/share/enigma2/picon/ [video_videomodepreferred_read] mode(0) not found!!! [Time By]: Transponder [EPGC] time updated.. but cache file not set yet.. dont start epg!! [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) - double buffering available! 3600kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Unknown device type: dreambox front panel [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) Activating language Deutsch [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: letterbox [VideoMode] setting scaler_sharp[video_videomode60hz_write] videomode(9) not supported ness to: 0000000D [VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz [EPGC Loads] Poller enabled. [EPGC Save] Poller enabled. [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat' couldn't open /proc/stb/misc/12V_output setLCDBrightness 25 setLCDBrightness 127 setLCDScrollspeed 150 setLCDRepeat 3 setLCDMode 1 Setting OSD position: 0 720 0 576 Setting OSD alpha: 255 Setting 3D mode: auto Setting 3D depth: 50 [EPGC Save] Poller enabled. [EPGC Loads] Poller enabled. FIXME: request for unknown slot FIXME: request for unknown slot Module 'mechanize' loaded Twisted Agent in use (12, 0, 0) Module 'ast' loaded Module 'mechanize' loaded [Ipkg] Added to OPKG destinations: / [Info-Panel] machinebrand: Sezam [Info-Panel] machinename: Marvel [Info-Panel] oem name: ini [Info-Panel] boxtype: sezammarvel Plugin Extensions/WebInterface failed to load: No module named plugin [TranscodingSetup] set /proc/stb/encoder/0/bitrate to 2000000 [TranscodingSetup] set /proc/stb/encoder/0/framerate to 50000 [TranscodingSetup] set /proc/stb/encoder/1/bitrate to 2000000 [TranscodingSetup] set /proc/stb/encoder/1/framerate to 50000 [TranscodingSetup] set port 8002 --> setting contrast to: 00008000 --> setting saturation to: 00008000 --> setting hue to: 00008000 --> setting brightness to: 00008000 --> setting block_noise_reduction to: 00000000 --> setting mosquito_noise_reduction to: 00000000 --> setting digital_contour_removal to: 00000000 --> setting splitmode to: off --> setting sharpness to: 00000000 --> setting auto_flesh to: 00000000 --> setting green_boost to: 00000000 --> setting blue_boost to: 00000000 --> setting dynamic_contrast to: 00000000 --> setting color_soace to: Edid(Auto) --> applying pep values command ['mkdir -p /media/net/HarddiskET9X00', 'mount -t cifs -o rw,noatime,noserverino,username=username,password=password //192.168.1.6/Harddisk /media/net/HarddiskET9X00', 'sleep 2'] eHdmiCEC: send message 84 10 00 03 [AutoTimer] Auto Poll Enabled [CI_Assignment] activating ci configs: [CI_Activate] FOUND 2 CI Slots [CI_Activate_Config_CI0] error parsing xml... [CI_Activate_Config_CI1] error parsing xml... starting hotplug handler [Timer] Record RecordTimerEntry(name=The Mentalist, begin=Mon Mar 24 20:12:00 2014, serviceref=1:0:1:32C9:45D:1:C00000:0:0:0:, justplay=0, isAutoTimer=0) [Timer] Record RecordTimerEntry(name=The Mentalist, begin=Mon Mar 24 20:59:00 2014, serviceref=1:0:1:32C9:45D:1:C00000:0:0:0:, justplay=0, isAutoTimer=0) [Timer] Record RecordTimerEntry(name=The Closer, begin=Mon Mar 24 21:50:00 2014, serviceref=1:0:1:32C9:45D:1:C00000:0:0:0:, justplay=0, isAutoTimer=0) [Timer] Record RecordTimerEntry(name=Inspector Barnaby, begin=Mon Mar 24 20:12:00 2014, serviceref=1:0:1:6D6E:437:1:C00000:0:0:0:, justplay=0, isAutoTimer=0) [Timer] Record RecordTimerEntry(name=CSI:NY, begin=Mon Mar 24 22:07:00 2014, serviceref=1:0:1:2F1C:441:1:C00000:0:0:0:, justplay=0, isAutoTimer=0) [NAVIGATION] wasTimerWakeup = False Setvolume: 100 100 (raw) Setvolume: 0 0 (-1db) EMC: +++ EMC V3.7.4beta20131015 startup [AutoBouquetsMaker] AutoStart Enabled [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Do 01 Jan 1970 01:01:00 CET MetrixHDWeatherStandalone lookup for ID 676757 Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),) warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'> warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'> [Skin] Attribute not implemented: valign value: center [SKIN] No skin to read... [SCREENNAME] RdsInfoDisplaySummary warning, skin is missing element From in <class 'Screens.Dish.Dish'> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'> warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'> warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'> warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'> warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'> warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'> warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'> warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'> RemovePopup, id = ZapError MetrixHDWeatherStandalone lookup for ID 676757 Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),) [SCREENNAME] RdsInfoDisplay [Skin] SKIN ERROR in screen 'InfoBarSummary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineStableUpdateState' was not found in screen 'InfoBarSummary'!. Please contact the skin's author! [Skin] SKIN ERROR in screen 'InfoBarSummary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineUnstableUpdateState' was not found in screen 'InfoBarSummary'!. Please contact the skin's author! [SCREENNAME] InfoBarSummary [SCREENNAME] InfoBar setValue 90 Setvolume: 90 90 (raw) Setvolume: 7 7 (-1db) [video_videomodepreferred_read] mode(0) not found!!! lastshutdown=False (True = last shutdown was OK) NOK shutdown action=normal bootup action=normal [LogManager] Trim Poll Started [LogManager] Trash Poll Started [LogManager] probing folders [LogManager] found following log's: ['/media/hdd/logs', '/home/root/logs'] [LogManager] looking in: /media/hdd/logs [LogManager] /media/hdd/logs: bytesToRemove -10414684 [LogManager] looking in: /home/root/logs NO TIME SET [CAMSTARTER] Start/Check: 1 [CAMSTARTER] no CAM active, starting /usr/bin/CCcam_2.3.0 -t -C /usr/keys/CCcam.cfg EMC: Setting EPG language: de_DE [VLC] Checking for buildin servicets ... no [VLC] Checking for existing and usable servicets.so ... No module named servicets [VLC] Checking for usable gstreamer service ... yes EMC: Next trashcan cleanup in 1439 minutes playing 1:0:19:2840:3FB:1:C00000:0:0:0: [SCREENNAME] InfoBar setPixmapNum(0) failed! defined pixmaps: [] setPixmapNum(0) failed! defined pixmaps: [] setPixmapNum(0) failed! defined pixmaps: [] RemovePopup, id = ZapError allocate channel.. 03fb:0001 opening frontend 1 (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:19:2840:3FB:1:C00000:0:0:0: allocate demux poll: unhandled POLLERR/HUP/NVAL for fd 33(16) poll: unhandled POLLERR/HUP/NVAL for fd 35(17) poll: unhandled POLLERR/HUP/NVAL for fd 39(16) poll: unhandled POLLERR/HUP/NVAL for fd 42(16) poll: unhandled POLLERR/HUP/NVAL for fd 44(16) [eBatch] retval=0, cmds left=2, data: poll: unhandled POLLERR/HUP/NVAL for fd 49(16) job Components.Task.Job name=LogManager #tasks=1 completed with [] in None [EPGC] Saving EPGCache. [SEC] set static current limiting [SEC] invalidate current switch params job Components.Task.Job name=Prüfe EPG Cache #tasks=2 completed with [] in None [EPGC] Refreshing EPGCache. [EPGC] 110131 events read from /etc/enigma2/epg.dat EMC delPathFromCache /hdd/movie/trashcan EMC: [EMCMS] trashcan cleanup: nothing to delete... 0.0.0.0 192.168 [OpenWebif] loading external plugins... [OpenWebif] no plugins to load [OpenWebif] started on 80 [OpenWebif] started on 443 poll: unhandled POLLERR/HUP/NVAL for fd 33(16) poll: unhandled POLLERR/HUP/NVAL for fd 35(16) [SEC] setVoltage 2 [SEC] sleep 10ms job Components.Task.Job name=Prüfe EPG Cache #tasks=2 completed with [] in None set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting CIFS VFS: Error connecting to socket. Aborting operation OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000
-
27.03.2014, 20:32 #5
- Registriert seit
- 06.04.2013
- Ort
- AT Wien
- Beiträge
- 396
- Thanks (gegeben)
- 132
- Thanks (bekommen)
- 19
- Total Downloaded
- 39,22 MB
- Total Downloaded
- 39,22 MB
ThemenstarterBox 1:Gigablue QUAD UHD 4KBox 2:Zgemma h9 twinBox 3:Mutant HD24002.Hälfte Log
Code:oll: unhandled POLLERR/HUP/NVAL for fd 35(16) OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting NO TIME SET CIFS VFS: Error connecting to socket. Aborting operation OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: cifs_mount failed w/return code = -148 [eBatch] retval=32, cmds left=1, data: unc name specified twice, ignoring second mount error(148): No route to host Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) mount: mounting //192.168.1.3/Videos on /media/net/PC1AZ failed: No route to host poll: unhandled POLLERR/HUP/NVAL for fd 35(17) NO TIME SET [eBatch] retval=0, cmds left=0, data: command ['mkdir -p /media/net/Rootsezammarvel', 'mount -t cifs -o rw,noatime,noserverino,username=username,password=password //192.168.1.2/Root /media/net/Rootsezammarvel', 'sleep 2'] poll: unhandled POLLERR/HUP/NVAL for fd 35(16) [eBatch] retval=0, cmds left=2, data: poll: unhandled POLLERR/HUP/NVAL for fd 35(16) [eBatch] retval=0, cmds left=1, data: poll: unhandled POLLERR/HUP/NVAL for fd 35(16) OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [eBatch] retval=0, cmds left=0, data: command ['mkdir -p /media/net/RootET9X00', 'mount -t cifs -o rw,noatime,noserverino,username=guest,password= //192.168.1.6/root /media/net/RootET9X00', 'sleep 2'] poll: unhandled POLLERR/HUP/NVAL for fd 35(16) [eBatch] retval=0, cmds left=2, data: poll: unhandled POLLERR/HUP/NVAL for fd 35(16) [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting CIFS VFS: Error connecting to socket. Aborting operation NO TIME SET OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting CIFS VFS: Error connecting to socket. Aborting operation CIFS VFS: cifs_mount failed w/return code = -148 [eBatch] retval=32, cmds left=1, data: unc name specified twice, ignoring second mount error(148): No route to host Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) mount: mounting //192.168.1.6/root on /media/net/RootET9X00 failed: No route to host poll: unhandled POLLERR/HUP/NVAL for fd 35(17) [eBatch] retval=0, cmds left=0, data: poll: unhandled POLLERR/HUP/NVAL for fd 35(16) OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting NO TIME SET OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting NO TIME SET OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting NO TIME SET OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting NO TIME SET OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting NO TIME SET OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting 1 74 1 KEY: 116 POWER action -> GlobalActions power_down 0 74 1 KEY: 116 POWER action -> GlobalActions power_up [video_videomodepreferred_read] mode(0) not found!!! enter standby setPixmapNum(0) failed! defined pixmaps: [] start release channel timer [Skin] SKIN ERROR in screen 'StandbySummary' widget 'widget': {MetrixHD/skin.xml}: source 'session.OnlineCheckState' was not found in screen 'StandbySummary'!. Please contact the skin's author! [SCREENNAME] StandbySummary setLCDBrightness 25 eHdmiCEC: send message 36 [SCREENNAME] Standby OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms release cached channel (timer timeout) [eDVBLocalTimerHandler] remove channel 0x2835c18 [eEPGCache] remove channel 0x2835c18 stop release channel timer [SEC] set dynamic current limiting NO TIME SET close frontend 1 1 74 1 KEY: 116 POWER action -> StandbyActions power leave standby [SCREENNAME] InfoBarSummary playing 1:0:19:2840:3FB:1:C00000:0:0:0: setPixmapNum(0) failed! defined pixmaps: [] setPixmapNum(0) failed! defined pixmaps: [] setPixmapNum(0) failed! defined pixmaps: [] RemovePopup, id = ZapError allocate channel.. 03fb:0001 opening frontend 1 (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:19:2840:3FB:1:C00000:0:0:0: allocate demux setLCDBrightness 127 [SEC] set static current limiting eHdmiCEC: send message 04 [SEC] invalidate current switch params [SEC] setVoltage 2 eHdmiCEC: send message 82 10 00 [SEC] sleep 10ms eHdmiCEC: send message 44 6D set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms eHdmiCEC: send message 70 10 00 NO TIME SET 0 74 1 KEY: 116 POWER [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting [AutoTimer] Auto Poll [AutoTimer] Auto Poll Started [EPGC] event 60e8 not found in epgcache [EPGC] event 2490 not found in epgcache [EPGC] event 60e9 not found in epgcache [EPGC] event 60eb not found in epgcache [EPGC] event 0174 not found in epgcache job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting 1 67 1 KEY: 103 UP action -> InfobarChannelSelection switchChannelUp [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineStableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author! [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineUnstableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author! [SCREENNAME] ['ChannelSelection_summary', 'SimpleSummary'] [SCREENNAME] ChannelSelection 0 67 1 KEY: 103 UP 1 ae 1 KEY: 174 EXIT action -> OkCancelActions cancel [SCREENNAME] InfoBarSummary OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms 0 ae 1 KEY: 174 EXIT NO TIME SET [SEC] set dynamic current limiting 1 67 1 KEY: 103 UP action -> InfobarChannelSelection switchChannelUp [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineStableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author! [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineUnstableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author! [SCREENNAME] ['ChannelSelection_summary', 'SimpleSummary'] [SCREENNAME] ChannelSelection 0 67 1 KEY: 103 UP 1 6c 1 KEY: 108 DOWN 0 6c 1 KEY: 108 DOWN 1 ae 1 KEY: 174 EXIT action -> OkCancelActions cancel [SCREENNAME] InfoBarSummary 0 ae 1 KEY: 174 EXIT OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning tune failed. DVB service failed to tune - error 1 ignore sdt update data.... incorrect transponder tuned!!! [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] set dynamic current limiting 1 74 1 KEY: 116 POWER action -> GlobalActions power_down 0 74 1 KEY: 116 POWER action -> GlobalActions power_up [video_videomodepreferred_read] mode(0) not found!!! enter standby setPixmapNum(0) failed! defined pixmaps: [] start release channel timer [Skin] SKIN ERROR in screen 'StandbySummary' widget 'widget': {MetrixHD/skin.xml}: source 'session.OnlineCheckState' was not found in screen 'StandbySummary'!. Please contact the skin's author! [SCREENNAME] StandbySummary setLCDBrightness 25 eHdmiCEC: send message 36 [SCREENNAME] Standby OURSTATE: failed, retune (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1743 mhz OURSTATE: tuning [SEC] set static current limiting [SEC] invalidate current switch params set sequence pos 3 set sequence pos 3 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms NO TIME SET [SEC] set dynamic current limiting release cached channel (timer timeout) [eDVBLocalTimerHandler] remove channel 0x284e908 [eEPGCache] remove channel 0x284e908 stop release channel timer close fronte
-
27.03.2014, 20:38 #6
- Registriert seit
- 07.04.2013
- Ort
- OpenATV - Wien
- Beiträge
- 153
- Thanks (gegeben)
- 3636
- Thanks (bekommen)
- 3542
- Total Downloaded
- 51,16 MB
- Total Downloaded
- 51,16 MB
Ich bin da nicht der Experte, aber das scheint kein Hardware Problem zu sein sondern Netzwerk, das hatte ich vor ein paar Tagen auch mal. Deaktivier mal dein Netzwerk
-
27.03.2014, 20:45 #7
- Registriert seit
- 06.04.2013
- Ort
- AT Wien
- Beiträge
- 396
- Thanks (gegeben)
- 132
- Thanks (bekommen)
- 19
- Total Downloaded
- 39,22 MB
- Total Downloaded
- 39,22 MB
ThemenstarterBox 1:Gigablue QUAD UHD 4KBox 2:Zgemma h9 twinBox 3:Mutant HD2400Zur Zeit überhaupt nichts angeschlossen -nur HDMI/TV
Glaube doch daß ein Hardware Problem vorliegt.
Wenn ich einschalte läuft weder hdd noch der Ventilator
Thermisches Problem ??
Box und sämtliche Komponenten sind kalt
-
05.01.2017, 12:54 #8
- Registriert seit
- 10.02.2014
- Beiträge
- 28
- Thanks (gegeben)
- 65
- Thanks (bekommen)
- 5
- Total Downloaded
- 643,9 KB
- Total Downloaded
- 643,9 KB
Box 1:Sezam MarvelHi RuPo2
I have the same problem you had, how did you solve the problem?
Ich habe das gleiche Problem, das Sie hatten, wie haben Sie das Problem gelöst
Lesezeichen