Thanks Thanks:  0
Ergebnis 1 bis 8 von 8
  1. #1
    Senior Mitglied Avatar von RuPo2
    Registriert seit
    06.04.2013
    Ort
    AT Wien
    Beiträge
    240
    Total Downloaded
    10,58 MB
    Total Downloaded
    10,58 MB
    ReceiverDankeAktivitäten
    Box 1:
    Sezam Marvel
     
     
    Box 2:
    Mutant 2400 HD
     
     

    Sezam Marvel Tot ?

    HI
    Die Sezam Marvel hat anscheinend den Geist aufgegeben.
    Beeim Einschalten tut sich nichts mehr.
    Netzspannung, Anschlüsse sind Ok.
    Sie ist in den letzten Tagen absolut brav gelaufen und plötzlich TOT.
    Naja war halt ein teurer Versuch- Kismet.

    RuPo2

    •   Alt Advertising

       

  2. #2
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Hast Du serielles Kabel, dann mal damit den Startversuch loggen



  3. #3
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.767
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    per serial auch keine Ausgabe mehr nichts ?

  4. #4
    Senior Mitglied Avatar von RuPo2
    Registriert seit
    06.04.2013
    Ort
    AT Wien
    Beiträge
    240
    Themenstarter
    Total Downloaded
    10,58 MB
    Total Downloaded
    10,58 MB
    ReceiverDankeAktivitäten
    Box 1:
    Sezam Marvel
     
     
    Box 2:
    Mutant 2400 HD
     
     

    Sezam Marvel einmal gebootet und wieder Tot

    Ist zwei Stunden in der Ecke gestanden und hat EINMAL gebootet
    jetzt wieder TOT

    Code:
    ~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.27 21:04:57 =~=~=~=~=~=~=~=~=~=~=~=
     
    BCM74250012
    
    
    M0
    
    M1
    0
    SHMOO VER 1.17
    MCB
    
    PKID 20130702 003B6000 003B0000 0496203E 00001C00 
    
    S300001F7 
    00001660 
    +00000004 >00000166 
    t00000025 0000003C 
    @00000096 ^0000001A 
    @00000096 ^0000001A 
    
    RDEN W0 00000024 00000009 00000000 
    
    RDEN W1 0000002A 00000001 00000000 
    
    
    RDLY W0 00000003 
    RDLY W1 00000003 
    
    RDQS W0 
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     01 --------++++++++++++++++++++++X++++++++++++++++++++++-----------
     02 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     03 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
     04 -+++++++++++++++++++++++X++++++++++++++++++++++-----------------
     05 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     06 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
     07 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
     08 --+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
     09 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------
     10 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
     11 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     12 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     13 -+++++++++++++++++++++++++X+++++++++++++++++++++++++------------
     14 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     15 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
    
    
    P    W0 
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     01 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
     03 -----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
     04 +++++++++++++++++++++++X+++++++++++++++++++++++-----------------
     05 --++++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     06 --++++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     07 ------+++++++++++++++++++++++++++X++++++++++++++++++++++++++----
     08 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
     09 --+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-------
     10 -+++++++++++++++++++++++++++X++++++++++++++++++++++++++---------
     11 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
     12 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
     13 +++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
     14 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
     15 ---+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++---
    
    
    N    W0 
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     01 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
     02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
     03 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
     04 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
     05 ---++++++++++++++++++++++++++X+++++++++++++++++++++++++---------
     06 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     07 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-
     08 -+-+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     09 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     10 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     11 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++--------
     12 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++--------
     13 -++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
     14 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     15 -******************************************
    
    ReShmoo MEMC1
    ReShmoo MEMC0
    Enabling NAND flash at CS1: MT29F16G08CBACA(DEVICE ID=0x2C48044A), ECC Level=12, Spare Area Size=27
    Size = 4MB, Sector Size 65536, Page Size 256
    
    CPU speed:            1305MHz
    DDR Frequency:        796 MHz
    DDR Mode:             DDR3
    Total memory(MEMC 0): 1024MB
    MEMC 0 DDR Width:     32
    Total memory(MEMC 1): 1024MB
    MEMC 1 DDR Width:     32
    Boot Device:          SPI
    Total flash:          4MB
    RTS VERSION:          20120919205446_7425_dual_encode
    ETH0_PHY:             RGMII_NO_ID
    ETH0_MDIO_MODE:       1
    ETH0_SPEED:           1000
    ETH0_PHYADDR:         probe
    
    Initializing USB.
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    
    cfe_lcd_init 
    
    USB: New device connected to bus 3 hub 1 port 1[J
    
    
    USB: Resetting device on bus 3 hub 1 port 1[J
    
    USB: Locating Class FF Vendor 148F Product 5372: Driver not found.
    lcd_init 
    CFE initialized.
    
    [FLASH-TOOL] Searching update files...
    USB device matching <USB Disk> not found!
    
    Executing FORCE STARTUP...
    Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=128M@64M bmem=384M@512M memc1=640M
    Loading: 0x80001000/7009792 0x806b0600/159664 Entry address is 0x8052d6b0
    Starting program at 0x8052d6b0
    
    Linux version 3.3.8-2.0 (oa2@builder) (gcc version 4.8.2 (GCC) ) #1 SMP Tue Mar 18 14:19:00 CET 2014
    Fetching vars from bootloader... found 15 vars.
    Options: moca=0 sata=1 pcie=1 usb=1
    Using 1024 MB + 1024 MB RAM (from CFE)
    bootconsole [early0] enabled
    CPU revision is: 00025a11 (Brcm4380)
    FPU revision is: 00130001
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
     memory: 30000000 @ 20000000 (usable)
     memory: 28000000 @ 90000000 (usable)
    bmem: adding 128 MB RESERVED region at 64 MB (0x08000000@0x04000000)
    bmem: adding 384 MB RESERVED region at 512 MB (0x18000000@0x20000000)
    Zone PFN ranges:
      Normal   0x00000000 -> 0x00050000
      HighMem  0x00050000 -> 0x000b8000
    Movable zone start PFN for each node
    Early memory PFN ranges
        0: 0x00000000 -> 0x00010000
        0: 0x00020000 -> 0x00050000
        0: 0x00090000 -> 0x000b8000
    PERCPU: Embedded 7 pages/cpu @81e12000 s5632 r8192 d14848 u32768
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 420096
    Kernel command line: ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=128M@64M bmem=384M@512M memc1=640M
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    Memory: 1157380k/1048576k available (5391k kernel code, 546556k reserved, 1262k data, 192k init, 655360k highmem)
    Hierarchical RCU implementation.
    NR_IRQS:160
    Measuring MIPS counter frequency...
    Detected MIPS clock frequency: 1305 MHz (163.136 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    SMP: Booting CPU1...
    CPU revision is: 00025a11 (Brcm4380)
    FPU revision is: 00130001
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    SMP: CPU1 is running
    Brought up 2 CPUs
    devtmpfs: initialized
    bmem: adding extra 384 MB RESERVED region at 2944 MB (0x18000000@0xb8000000)
    NET: Registered protocol family 16
    USB0: power enable is active low; overcurrent is active low
    USB1: power enable is active low; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Advanced Linux Sound Architecture Driver Version 1.0.24.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switching to clocksource wktmr
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    highmem bounce pool size: 64 pages
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.18)
    msgmni has been set to 980
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62) is a 16550A
    console [ttyS0] enabled, bootconsole disabled
    console [ttyS0] enabled, bootconsole disabled
    serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64) is a 16550A
    loop: module loaded
    ahci: SSS flag set, parallel bus scan disabled
    ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    ahci strict-ahci.0: flags: ncq sntf stag clo slum part 
    scsi0 : ahci_platform
    scsi1 : ahci_platform
    ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
    ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
    brcmstb_nand: NAND controller driver is loaded
    Found PHY at Address 4
    Config GPHY through MDIO
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    ata1.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
    ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    sd 0:0:0:0: [sda] 4096-byte physical blocks
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    ata2: SATA link down (SStatus 0 SControl 300)
    ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    usb 4-1: new high-speed USB device number 2 using ehci-brcm
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    lirc_dev: IR Remote Control driver registered, major 254 
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR SANYO protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    IR LIRC bridge handler initialized
    usbcore: registered new interface driver btusb
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    ALSA device list:
      No soundcards found.
    TCP cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    lib80211: common routines for IEEE802.11 drivers
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS1: setting up NAND flash (primary)
    ONFI param page 0 valid
    ONFI flash detected
    NAND device: Manufacturer ID: 0x2c, Chip ID: 0x48 (Micron MT29F16G08CBACAWP)
    ONFI param page 0 valid
    ONFI flash detected
    NAND device: Manufacturer ID: 0x2c, Chip ID: 0x48 (Micron MT29F16G08CBACAWP)
    brcmnand brcmnand.0: 2048MiB total, 1024KiB blocks, 4KiB pages, 27B OOB, 8-bit, BCH-24 (1KiB sector)
    Bad block table found at page 524032, version 0x01
    Bad block table found at page 523776, version 0x01
    nand_read_bbt: bad block at 0x000005a00000
    nand_read_bbt: bad block at 0x000005b00000
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000700000-0x000080000000 : "rootfs"
    0x000000700000-0x000080000000 : "rootfs(redundant)"
    0x000000000000-0x000000700000 : "kernel"
    EBI CS0: setting up SPI flash
    spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    m25p80 spi0.0: found en25q32b, expected m25p80
    m25p80 spi0.0: en25q32b (4096 Kbytes)
    Creating 6 MTD partitions on "spi0.0":
    0x000000000000-0x000000080000 : "cfe"
    0x000000080000-0x000000280000 : "splash"
    0x000000280000-0x000000300000 : "macadr"
    0x000000300000-0x000000380000 : "nvram"
    0x000000380000-0x0000003c0000 : "bootconfig"
    0x0000003c0000-0x000000400000 : "facconfig"
    EBI CS3: setting up NOR flash
    physmap platform flash device: 00002000 at 14000000
    UBI: attaching mtd0 to ubi0
    UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
    UBI: logical eraseblock size:    1040384 bytes
    UBI: smallest flash I/O unit:    4096
    UBI: VID header offset:          4096 (aligned 4096)
    UBI: data offset:                8192
    UBI: max. sequence number:       474
    UBI: attached mtd0 to ubi0
    UBI: MTD device name:            "rootfs"
    UBI: MTD device size:            2041 MiB
    UBI: number of good PEBs:        2035
    UBI: number of bad PEBs:         6
    UBI: number of corrupted PEBs:   0
    UBI: max. allowed volumes:       128
    UBI: wear-leveling threshold:    4096
    UBI: number of internal volumes: 1
    UBI: number of user volumes:     1
    UBI: available PEBs:             0
    UBI: total number of reserved PEBs: 2035
    UBI: number of PEBs reserved for bad PEB handling: 20
    UBI: max/mean erase counter: 2/1
    UBI: image sequence number:  1178341671
    UBI: background thread "ubi_bgt0d" started, PID 59
    
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: file system size:   2053718016 bytes (2005584 KiB, 1958 MiB, 1974 LEBs)
    UBIFS: journal size:       12550144 bytes (12256 KiB, 11 MiB, 13 LEBs)
    UBIFS: media format:       w4/r0 (latest is w4/r0)
    UBIFS: default compressor: lzo
    UBIFS: reserved for root:  0 bytes (0 KiB)
    VFS: Mounted root (ubifs filesystem) on device 0:14.
    devtmpfs: mounted
    Freeing unused kernel memory: 192k freed
    
    INIT: version 2.88 booting
    
    EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [NEXUS_Platform_P_InitBoard] LCD device(14000000) => 94000000 
    [platform_i2c_mutex_init] ...
    fb0: brcmfb frame buffer device
    [MCU] ver : 2.00.34
    [MCU] model : INI900RU_OLED
    [MCU] power : SWITCH
    input: dreambox front panel as /devices/virtual/input/input0
    input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    DVB: registering new adapter (dvb)
    DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
    DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
    usb 4-1: reset high-speed USB device number 2 using ehci-brcm
    phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset detected.
    phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
    usbcore: registered new interface driver rt2800usb
    rtusb init rt2870 --->
    
    
    === pAd = e5ac6000, size = 511144 ===
    
    <-- RTMPAllocTxRxRingMemory, Status=0
    <-- RTMPAllocAdapterBlock, Status=0
    usbcore: registered new interface driver rt2870
    [ioctlVideo_SelectSource] stream_source (0 -> 1) 
    ALSA: Restoring mixer settings...
    /usr/sbin/alsactl: load_state:1729: No soundcards found...
    Star[ioctlVideo_SelectSource] stream_source (1 -> 0) 
    ting portmap daemon...
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    
    INIT: Entering runlevel: 3
    
    Configuring network interfaces... done.
    NET: Registered protocol family 10
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    Starting system message bus: dbus.
    Starting Dropbear SSH server: dropbear.
    Starting rpcbind daemon...rpcbind: cannot bind * on udp: Address already in use
    
    rpcbind: cannot bind tcp: Address already in use
    
    done.
    rpcbind: cannot get uid of '': Success
    
    Mounting remote filesystems...
    creating NFS state directory: done
    starting statd: done
    Starting automount: automount: program is already running.
    done.
    starting Busybox Periodic Command Scheduler: crond... done.
    crond[409]: crond: crond (busybox 1.21.1) started, log level 8
    
    Starting internet superserver: inetd.
    starting 8 nfsd kernel threads: rpc.nfsd: Setting version failed: errno 22 (Invalid argument)
    xs_local_setup_socket: unhandled error (146) connecting to /var/run/rpcbind.sock
    svc: failed to register lockdv1 RPC service (errno 124).
    done
    starting mountd: done
    Starting Samba: smbd nmbd.
    Starting syslogd/klogd: done
     * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
       ...done.
    [ioctlVideo_SelectSource] stream_source (0 -> 1) 
    [ioctlVideo_SelectSource] stream_source (1 -> 0) 
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    BCM accel interface not available - Inappropriate ioctl for device
    + (9) GFBDC
    10800k video mem
     - double buffering available!
    7560kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 2880)
    + (9) gLCDDC
    found OLED display!
    lcd buffer 0x785fc8 16384 bytes, stride 256
    LCD resolution: 256 x 64 x 8 (stride: 256)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "dreambox front panel" is a remotecontrol
    Input device "dreambox advanced remote control (native)" is a mouse
    Found 2 input devices.
    + (22) Hdmi CEC driver
    eHdmiCEC: detected physical address change: 1000 --> 0000
    eHdmiCEC: send message 84 00 00 03 
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    eDVBCIInterfaces->setInputSource(2, 2)
    eDVBCIInterfaces->setInputSource(3, 3)
    done, found 2 common interface slots
    + (35) CA handler
    + (36) Stream server
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 117 channels/transponders and 1664 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    opening frontend 1
    close frontend 1
    found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
    RTC not ready... wait for transponder time
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
    found 6 spinner!
    executing main
    setIoPrio best-effort level 3 ok
    [CIMAX] init done.
    Failed to open /dev/dbox/fp0
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    [Harddisk] enumerating network mounts...
    Reading satellites.xml
    main thread is non-idle! display spinner!
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: simple
    diseqcmode:  single
    slot: 1 configmode: simple
    diseqcmode:  single
    sec config completed
    [NimManager] slot name=DVB-S2 NIM
    [NimManager] multiType = True
    [NimManager] slot name=DVB-S2 NIM
    [NimManager] multiType = True
    [Picon] adding path: /usr/share/enigma2/picon/
    [video_videomodepreferred_read] mode(0) not found!!!
    [Time By]: Transponder
    [EPGC] time updated.. but cache file not set yet.. dont start epg!!
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
     - double buffering available!
    3600kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Unknown device type: dreambox front panel
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language Deutsch
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [VideoMode] setting scaler_sharp[video_videomode60hz_write] videomode(9) not supported
    ness to: 0000000D
    [VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
    [EPGC Loads] Poller enabled.
    [EPGC Save] Poller enabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    couldn't open /proc/stb/misc/12V_output
    setLCDBrightness 25
    setLCDBrightness 127
    setLCDScrollspeed 150
    setLCDRepeat 3
    setLCDMode 1
    Setting OSD position: 0 720 0 576
    Setting OSD alpha: 255
    Setting 3D mode: auto
    Setting 3D depth: 50
    [EPGC Save] Poller enabled.
    [EPGC Loads] Poller enabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    Module 'mechanize' loaded
    Twisted Agent in use (12, 0, 0)
    Module 'ast' loaded
    Module 'mechanize' loaded
    [Ipkg] Added to OPKG destinations: /
    [Info-Panel] machinebrand: Sezam
    [Info-Panel] machinename: Marvel
    [Info-Panel] oem name: ini
    [Info-Panel] boxtype: sezammarvel
    Plugin  Extensions/WebInterface failed to load: No module named plugin
    [TranscodingSetup] set /proc/stb/encoder/0/bitrate to 2000000
    [TranscodingSetup] set /proc/stb/encoder/0/framerate to 50000
    [TranscodingSetup] set /proc/stb/encoder/1/bitrate to 2000000
    [TranscodingSetup] set /proc/stb/encoder/1/framerate to 50000
    [TranscodingSetup] set port 8002
    --> setting contrast to: 00008000
    --> setting saturation to: 00008000
    --> setting hue to: 00008000
    --> setting brightness to: 00008000
    --> setting block_noise_reduction to: 00000000
    --> setting mosquito_noise_reduction to: 00000000
    --> setting digital_contour_removal to: 00000000
    --> setting splitmode to: off
    --> setting sharpness to: 00000000
    --> setting auto_flesh to: 00000000
    --> setting green_boost to: 00000000
    --> setting blue_boost to: 00000000
    --> setting dynamic_contrast to: 00000000
    --> setting color_soace to: Edid(Auto)
    --> applying pep values
    command ['mkdir -p /media/net/HarddiskET9X00', 'mount -t cifs -o rw,noatime,noserverino,username=username,password=password //192.168.1.6/Harddisk /media/net/HarddiskET9X00', 'sleep 2']
    eHdmiCEC: send message 84 10 00 03 
    [AutoTimer] Auto Poll Enabled
    [CI_Assignment] activating ci configs:
    [CI_Activate] FOUND 2 CI Slots 
    [CI_Activate_Config_CI0] error parsing xml...
    [CI_Activate_Config_CI1] error parsing xml...
    starting hotplug handler
    [Timer] Record RecordTimerEntry(name=The Mentalist, begin=Mon Mar 24 20:12:00 2014, serviceref=1:0:1:32C9:45D:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=The Mentalist, begin=Mon Mar 24 20:59:00 2014, serviceref=1:0:1:32C9:45D:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=The Closer, begin=Mon Mar 24 21:50:00 2014, serviceref=1:0:1:32C9:45D:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=Inspector Barnaby, begin=Mon Mar 24 20:12:00 2014, serviceref=1:0:1:6D6E:437:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=CSI:NY, begin=Mon Mar 24 22:07:00 2014, serviceref=1:0:1:2F1C:441:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [NAVIGATION] wasTimerWakeup = False
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    EMC: +++ EMC V3.7.4beta20131015 startup
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Do 01 Jan 1970 01:01:00 CET
    MetrixHDWeatherStandalone lookup for ID 676757
    Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),)
    warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    [Skin] Attribute not implemented: valign value: center
    [SKIN] No skin to read...
    [SCREENNAME]  RdsInfoDisplaySummary
    warning, skin is missing element From in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
    warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
    RemovePopup, id = ZapError
    MetrixHDWeatherStandalone lookup for ID 676757
    Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),)
    [SCREENNAME]  RdsInfoDisplay
    [Skin] SKIN ERROR in screen 'InfoBarSummary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineStableUpdateState' was not found in screen 'InfoBarSummary'!. Please contact the skin's author!
    [Skin] SKIN ERROR in screen 'InfoBarSummary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineUnstableUpdateState' was not found in screen 'InfoBarSummary'!. Please contact the skin's author!
    [SCREENNAME]  InfoBarSummary
    [SCREENNAME]  InfoBar
    setValue 90
    Setvolume: 90 90 (raw)
    Setvolume: 7 7 (-1db)
    [video_videomodepreferred_read] mode(0) not found!!!
    lastshutdown=False        (True = last shutdown was OK)
    NOK shutdown action=normal
    bootup action=normal
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/media/hdd/logs', '/home/root/logs']
    [LogManager] looking in: /media/hdd/logs
    [LogManager] /media/hdd/logs: bytesToRemove -10414684
    [LogManager] looking in: /home/root/logs
    NO TIME SET
    [CAMSTARTER] Start/Check: 1
    [CAMSTARTER] no CAM active, starting /usr/bin/CCcam_2.3.0 -t -C /usr/keys/CCcam.cfg
    EMC: Setting EPG language: de_DE
    [VLC] Checking for buildin servicets ...  no
    [VLC] Checking for existing and usable servicets.so ...  No module named servicets
    [VLC] Checking for usable gstreamer service ...  yes
    EMC: Next trashcan cleanup in 1439 minutes
    playing 1:0:19:2840:3FB:1:C00000:0:0:0:
    [SCREENNAME]  InfoBar
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 03fb:0001
    opening frontend 1
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:19:2840:3FB:1:C00000:0:0:0:
    allocate demux
    poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
    poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 44(16)
    [eBatch] retval=0, cmds left=2, data:
    
    poll: unhandled POLLERR/HUP/NVAL for fd 49(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    [EPGC] Saving EPGCache.
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    job Components.Task.Job name=Prüfe EPG Cache #tasks=2 completed with [] in None
    [EPGC] Refreshing EPGCache.
    [EPGC] 110131 events read from /etc/enigma2/epg.dat
    EMC delPathFromCache /hdd/movie/trashcan
    EMC: [EMCMS] trashcan cleanup: nothing to delete...
    0.0.0.0
    192.168
    [OpenWebif] loading external plugins...
    [OpenWebif] no plugins to load
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    [SEC] setVoltage 2
    [SEC] sleep 10ms
    job Components.Task.Job name=Prüfe EPG Cache #tasks=2 completed with [] in None
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    CIFS VFS: Error connecting to socket. Aborting operation
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000

  5. #5
    Senior Mitglied Avatar von RuPo2
    Registriert seit
    06.04.2013
    Ort
    AT Wien
    Beiträge
    240
    Themenstarter
    Total Downloaded
    10,58 MB
    Total Downloaded
    10,58 MB
    ReceiverDankeAktivitäten
    Box 1:
    Sezam Marvel
     
     
    Box 2:
    Mutant 2400 HD
     
     

    2.Hälfte Log

    Code:
    oll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    NO TIME SET
    CIFS VFS: Error connecting to socket. Aborting operation
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    CIFS VFS: Error connecting to socket. Aborting operation
    CIFS VFS: cifs_mount failed w/return code = -148
    [eBatch] retval=32, cmds left=1, data:
    unc name specified twice, ignoring second
    mount error(148): No route to host
    Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
    mount: mounting //192.168.1.3/Videos on /media/net/PC1AZ failed: No route to host
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
    NO TIME SET
    [eBatch] retval=0, cmds left=0, data:
    
    command ['mkdir -p /media/net/Rootsezammarvel', 'mount -t cifs -o rw,noatime,noserverino,username=username,password=password //192.168.1.2/Root /media/net/Rootsezammarvel', 'sleep 2']
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    [eBatch] retval=0, cmds left=2, data:
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    [eBatch] retval=0, cmds left=1, data:
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [eBatch] retval=0, cmds left=0, data:
    
    command ['mkdir -p /media/net/RootET9X00', 'mount -t cifs -o rw,noatime,noserverino,username=guest,password= //192.168.1.6/root /media/net/RootET9X00', 'sleep 2']
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    [eBatch] retval=0, cmds left=2, data:
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    CIFS VFS: Error connecting to socket. Aborting operation
    NO TIME SET
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    CIFS VFS: Error connecting to socket. Aborting operation
    CIFS VFS: cifs_mount failed w/return code = -148
    [eBatch] retval=32, cmds left=1, data:
    unc name specified twice, ignoring second
    mount error(148): No route to host
    Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
    mount: mounting //192.168.1.6/root on /media/net/RootET9X00 failed: No route to host
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
    [eBatch] retval=0, cmds left=0, data:
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    NO TIME SET
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    NO TIME SET
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    NO TIME SET
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    NO TIME SET
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    NO TIME SET
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    1 74 1
    KEY: 116 POWER
    action ->  GlobalActions power_down
    0 74 1
    KEY: 116 POWER
    action ->  GlobalActions power_up
    [video_videomodepreferred_read] mode(0) not found!!!
    enter standby
    setPixmapNum(0) failed! defined pixmaps: []
    start release channel timer
    [Skin] SKIN ERROR in screen 'StandbySummary' widget 'widget': {MetrixHD/skin.xml}: source 'session.OnlineCheckState' was not found in screen 'StandbySummary'!. Please contact the skin's author!
    [SCREENNAME]  StandbySummary
    setLCDBrightness 25
    eHdmiCEC: send message 36 
    [SCREENNAME]  Standby
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    release cached channel (timer timeout)
    [eDVBLocalTimerHandler] remove channel 0x2835c18
    [eEPGCache] remove channel 0x2835c18
    stop release channel timer
    [SEC] set dynamic current limiting
    NO TIME SET
    close frontend 1
    1 74 1
    KEY: 116 POWER
    action ->  StandbyActions power
    leave standby
    [SCREENNAME]  InfoBarSummary
    playing 1:0:19:2840:3FB:1:C00000:0:0:0:
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 03fb:0001
    opening frontend 1
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:19:2840:3FB:1:C00000:0:0:0:
    allocate demux
    setLCDBrightness 127
    [SEC] set static current limiting
    eHdmiCEC: send message 04 
    [SEC] invalidate current switch params
    [SEC] setVoltage 2
    eHdmiCEC: send message 82 10 00 
    [SEC] sleep 10ms
    eHdmiCEC: send message 44 6D 
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    eHdmiCEC: send message 70 10 00 
    NO TIME SET
    0 74 1
    KEY: 116 POWER
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    [AutoTimer] Auto Poll
    [AutoTimer] Auto Poll Started
    [EPGC] event 60e8 not found in epgcache
    [EPGC] event 2490 not found in epgcache
    [EPGC] event 60e9 not found in epgcache
    [EPGC] event 60eb not found in epgcache
    [EPGC] event 0174 not found in epgcache
    job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    1 67 1
    KEY: 103 UP
    action ->  InfobarChannelSelection switchChannelUp
    [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineStableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author!
    [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineUnstableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author!
    [SCREENNAME]  ['ChannelSelection_summary', 'SimpleSummary']
    [SCREENNAME]  ChannelSelection
    0 67 1
    KEY: 103 UP
    1 ae 1
    KEY: 174 EXIT
    action ->  OkCancelActions cancel
    [SCREENNAME]  InfoBarSummary
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    0 ae 1
    KEY: 174 EXIT
    NO TIME SET
    [SEC] set dynamic current limiting
    1 67 1
    KEY: 103 UP
    action ->  InfobarChannelSelection switchChannelUp
    [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineStableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author!
    [Skin] SKIN ERROR in screen 'ChannelSelection_summary' widget 'widget': {MetrixHD/skin.xml}: source 'global.OnlineUnstableUpdateState' was not found in screen 'ChannelSelection_summary'!. Please contact the skin's author!
    [SCREENNAME]  ['ChannelSelection_summary', 'SimpleSummary']
    [SCREENNAME]  ChannelSelection
    0 67 1
    KEY: 103 UP
    1 6c 1
    KEY: 108 DOWN
    0 6c 1
    KEY: 108 DOWN
    1 ae 1
    KEY: 174 EXIT
    action ->  OkCancelActions cancel
    [SCREENNAME]  InfoBarSummary
    0 ae 1
    KEY: 174 EXIT
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    tune failed.
    DVB service failed to tune - error 1
    ignore sdt update data.... incorrect transponder tuned!!!
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    1 74 1
    KEY: 116 POWER
    action ->  GlobalActions power_down
    0 74 1
    KEY: 116 POWER
    action ->  GlobalActions power_up
    [video_videomodepreferred_read] mode(0) not found!!!
    enter standby
    setPixmapNum(0) failed! defined pixmaps: []
    start release channel timer
    [Skin] SKIN ERROR in screen 'StandbySummary' widget 'widget': {MetrixHD/skin.xml}: source 'session.OnlineCheckState' was not found in screen 'StandbySummary'!. Please contact the skin's author!
    [SCREENNAME]  StandbySummary
    setLCDBrightness 25
    eHdmiCEC: send message 36 
    [SCREENNAME]  Standby
    OURSTATE: failed, retune
    (1)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1743 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] invalidate current switch params
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    NO TIME SET
    [SEC] set dynamic current limiting
    release cached channel (timer timeout)
    [eDVBLocalTimerHandler] remove channel 0x284e908
    [eEPGCache] remove channel 0x284e908
    stop release channel timer
    close fronte

  6. #6
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Ich bin da nicht der Experte, aber das scheint kein Hardware Problem zu sein sondern Netzwerk, das hatte ich vor ein paar Tagen auch mal. Deaktivier mal dein Netzwerk



  7. #7
    Senior Mitglied Avatar von RuPo2
    Registriert seit
    06.04.2013
    Ort
    AT Wien
    Beiträge
    240
    Themenstarter
    Total Downloaded
    10,58 MB
    Total Downloaded
    10,58 MB
    ReceiverDankeAktivitäten
    Box 1:
    Sezam Marvel
     
     
    Box 2:
    Mutant 2400 HD
     
     
    Zur Zeit überhaupt nichts angeschlossen -nur HDMI/TV
    Glaube doch daß ein Hardware Problem vorliegt.
    Wenn ich einschalte läuft weder hdd noch der Ventilator
    Thermisches Problem ??
    Box und sämtliche Komponenten sind kalt

  8. #8
    Anfänger
    Registriert seit
    10.02.2014
    Beiträge
    28
    Total Downloaded
    643,9 KB
    Total Downloaded
    643,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Sezam Marvel
     
     
    Hi RuPo2
    I have the same problem you had, how did you solve the problem?
    Ich habe das gleiche Problem, das Sie hatten, wie haben Sie das Problem gelöst


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 00:30 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com