Ergebnis 21 bis 30 von 376
-
21.04.2015, 14:29 #21
- Registriert seit
- 28.04.2014
- Beiträge
- 371
- Thanks (gegeben)
- 159
- Thanks (bekommen)
- 50
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:GB UE 4K, Toshiba HDD 3TB intern) openATV 6.3Box 2:GB Quad Plus (4 x DVB-S2 , Seagate M9T 2TB intern) openATV 6.3Bei den Einstellungen hatte ich die settings in Deinem Bild Nr. 1 vergessen, aber trotzdem besteht weiterhin das Blinken der LED. Muss mich hier nur präzisieren: Wenn ich einen echten Neustart mache dann ist das Blinken erst nach dem ersten zappen zu sehen, beim Aufwecken aus dem soft standby startet das Blinken direkt sofern es vor dem Ausschalten geblinkt hat.
Hier mal ein serial log welches nach einem Neustart gemacht wurde zum zeitpunkt des ersten zappens:
Code:[EPGC] 100596 events read from /etc/enigma2/epg.dat [SCREENNAME] InfoBar setPixmapNum(0) failed! defined pixmaps: [] setPixmapNum(0) failed! defined pixmaps: [] RemovePopup, id = ZapError allocate channel.. 045d:0001 opening frontend 0 (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 12692250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1075 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:32DB:45D:1:C00000:0:0:0: allocate demux [CAMSTARTER] No Cam to Start, Exit eHdmiCEC: received message 46 poll: unhandled POLLERR/HUP/NVAL for fd 35(17) poll: unhandled POLLERR/HUP/NVAL for fd 36(16) poll: unhandled POLLERR/HUP/NVAL for fd 40(16) poll: unhandled POLLERR/HUP/NVAL for fd 47(16) poll: unhandled POLLERR/HUP/NVAL for fd 50(16) poll: unhandled POLLERR/HUP/NVAL for fd 53(16) poll: unhandled POLLERR/HUP/NVAL for fd 56(16) poll: unhandled POLLERR/HUP/NVAL for fd 59(16) poll: unhandled POLLERR/HUP/NVAL for fd 62(16) job Components.Task.Job name=LogManager #tasks=1 completed with [] in None eHdmiCEC: send message 7D [SEC] set static current limiting eHdmiCEC: received message 8C [SEC] invalidate current switch params eHdmiCEC: received message eHdmiCEC: received message [SEC] setVoltage 1 eHdmiCEC: received message 7E 01 eHdmiCec: volume forwarding to device 05 enabled [SEC] sleep 200ms 0.0.0.0 192.168 SerienRecorder plugin not found ER plugin not found [OpenWebif] started on 80 poll: unhandled POLLERR/HUP/NVAL for fd 34(16) eHdmiCEC: received message 7E 01 eHdmiCec: volume forwarding to device 05 enabled eHdmiCEC: send message 47 67 62 71 75 61 64 70 6C 75 73 [SEC] setVoltage 2 [SEC] setTone 0 [SEC] sleep 75ms [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/26.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/26.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/32.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/32.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/32.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/32.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/32.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/32.png [Picload] decode picture... /usr/share/enigma2/KravenFullHD/Wettericons/9.png [SEC] sendDiseqc: e0105a0dba(?) EMC: Setting EPG language: de_DE [SEC] sleep 100ms eHdmiCEC: send message 87 00 00 00 [SEC] setVoltage 1 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms (0)fe event: status 1, inversion off, m_tuning 2 (0)fe event: status 1f, inversion off, m_tuning 3 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x19d3200 running [eEPGCache] channel 0x19d3200 running [EPGC] next update in 2 sec stop release channel timer ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (00be), and 1 audio stream(s) (00bf), and the pcr pid is 00be, and the text pid is ffffffff allocate demux TuxTxt cache cleared decoder state: play, vpid=190, apid=191 DMX_SET_PES_FILTER(0xbe) - pcr - ok DEMUX_START - pcr - ok DMX_SET_PES_FILTER(0xbf) - audio - ok DEMUX_START - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PAUSE - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0xbe) - video - ok DEMUX_START - video - ok VIDEO_FREEZE - ok VIDEO_PLAY - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - ok AUDIO_CHANNEL_SELECT(0) - ok disable teletext subtitles page ffffffffffffffff (und) [Volume Adjust] Update Info [Volume Adjust] Volume = 70 [Volume Adjust] load xml... [Volume Adjust] New Channel [Volume Adjust] oldvol = 0 [eDVBCAService] new service 1:0:1:32DB:45D:1:C00000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:1:32DB:45D:1:C00000:0:0:0: RemovePopup, id = ZapError [SEC] set dynamic current limiting [LED-GIGA] delay init on boot [LED-GIGA] initVFD box = gbquadplus STB does not support to show clock in Deep Standby VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok [VLC] Checking for buildin servicets ... no [VLC] Checking for existing and usable servicets.so ... No module named servicets [VLC] Checking for usable gstreamer service ... yes EMC: Next trashcan cleanup in 722 minutes PATready ignore unsupported 32bpp -> 16bpp alphablend! use pmtpid 03f1 for service_id 32db [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: scale [Dish] tuning failed eventNewProgramInfo 0 0 have 1 video stream(s) (00be), and 1 audio stream(s) (00bf), and the pcr pid is 00be, and the text pid is ffffffff decoder state: play, vpid=190, apid=191 VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - ok [Volume Adjust] Update Info [Volume Adjust] Volume = 70 [Volume Adjust] load xml... [eDVBCIInterfaces] gotPMT sdt update done! ignore unsupported 32bpp -> 16bpp alphablend! VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok [EPGC] start caching events(1429613936) [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: scale ignore unsupported 32bpp -> 16bpp alphablend! EMC delPathFromCache /media/hdd/movie/trashcan EMC: [EMCMS] trashcan cleanup: nothing to delete... 1 192 1 KEY: 402 0 KEY_CHANNELUP BOUQUET+ 2015-04-21 12:59:01.210323 0 192 1 KEY: 402 1 KEY_CHANNELUP BOUQUET+ 2015-04-21 12:59:01.516697 action -> SpecialJumpActions specialjump_channelUp playing 1:0:1:4461:453:1:C00000:0:0:0: [eDVBCAService] free slot 0 demux 0 for service 1:0:1:32DB:45D:1:C00000:0:0:0: [eDVBCAService] free service 1:0:1:32DB:45D:1:C00000:0:0:0: decoder state: play, vpid=-1, apid=-1 DEMUX_STOP - pcr - ok DEMUX_STOP - video - ok VIDEO_STOP - ok AUDIO_STOP - ok DEMUX_STOP - audio - ok AUDIO_CONTINUE - ok cleaning up TuxTxt cache cleared start release channel timer getResolvedKey config.usage.remote_fallback failed !! (Typo??) [SCREENNAME] InfoBar setPixmapNum(0) failed! defined pixmaps: [] setPixmapNum(0) failed! defined pixmaps: [] RemovePopup, id = ZapError [eDVBLocalTimerHandler] remove channel 0x19d3200 [eEPGCache] remove channel 0x19d3200 [EPGC] abort caching events !! allocate channel.. 0453:0001 (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1075 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:4461:453:1:C00000:0:0:0: allocate demux recording service: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x6c9f6848> > allocate channel.. 040f:0001 available channel.. 0453:0001 opening frontend 1 (1)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11052750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1177 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:19:2889:40F:1:C00000:0:0:0: allocate demux [SEC] set static current limiting [SEC] set static current limiting [SEC] invalidate current switch params [SEC] invalidate current switch params set sequence pos 3 [SEC] setVoltage 2 [SEC] setVoltage 1 [SEC] setTone 0 [SEC] sleep 200ms [SEC] sleep 75ms [SEC] sendDiseqc: e0105a0d95(?) [SEC] sleep 100ms [SEC] setVoltage 2 [SEC] setTone 0 [SEC] sleep 75ms [SEC] setVoltage 1 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms [SEC] sendDiseqc: e0105a290e(?) [SEC] sleep 100ms (0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x19d3200 running [eEPGCache] channel 0x19d3200 running [EPGC] next update in 2 sec ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (05ff), and 1 audio stream(s) (0600), and the pcr pid is 05ff, and the text pid is 0025 allocate demux TuxTxt cache cleared decoder state: play, vpid=1535, apid=1536 DMX_SET_PES_FILTER(0x5ff) - pcr - ok DEMUX_START - pcr - ok DMX_SET_PES_FILTER(0x600) - audio - ok DEMUX_START - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PAUSE - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0x5ff) - video - ok DEMUX_START - video - ok VIDEO_FREEZE - ok VIDEO_PLAY - ok DMX_SET_PES_FILTER(0x25) - ttx - ok DEMUX_START - ttx - ok TuxTxt cache cleared TuxTxt: initialized TuxTxt service started 25 TuxTxt running thread...(025) VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - ok disable teletext subtitles page ffffffffffffffff (und) [Volume Adjust] Update Info [Volume Adjust] Volume = 70 [Volume Adjust] load xml... [Volume Adjust] New Channel [Volume Adjust] oldvol = 0 [eDVBCAService] new service 1:0:1:4461:453:1:C00000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:1:4461:453:1:C00000:0:0:0: RemovePopup, id = ZapError [SEC] setVoltage 1 [eDVBLocalTimerHandler] dont have correction.. set Transponder Diff [eDVBLocalTimerHandler] set RTC Time [eDVBLocalTimerHandler] Boxtype = [gbquadplus] [eDVBLocalTimerHandler] update RTC [eDVBLocalTimerHandler] time update to 12:59:02 [eDVBLocalTimerHandler] m_time_difference is 0 VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok PATready use pmtpid 0065 for service_id 4461 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 1 (1)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms eventNewProgramInfo 0 0 have 1 video stream(s) (05ff), and 1 audio stream(s) (0600), and the pcr pid is 05ff, and the text pid is 0025 decoder state: play, vpid=1535, apid=1536 [Volume Adjust] Update Info [Volume Adjust] Volume = 70 [Volume Adjust] load xml... [eDVBCIInterfaces] gotPMT poll: unhandled POLLERR/HUP/NVAL for fd 59(16) (1)fe event: status 1, inversion off, m_tuning 2 (1)fe event: status 1f, inversion off, m_tuning 3 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x19f9150 running [eEPGCache] channel 0x19f9150 running stop release channel timer [EPGC] next update in 2 sec ok ... now we start!! RECORD service event 5 [eDVBCAService] new service 1:0:19:2889:40F:1:C00000:0:0:0: [eDVBCAService] add demux 1 to slot 0 service 1:0:19:2889:40F:1:C00000:0:0:0: RECORD service event 6 tuned.. PATready use pmtpid 152c for service_id 2889 [SEC] set dynamic current limiting RECORD service event 5 start streaming... dvb subtitle PID 1531 with wrong subtitling type (24)... force 0x10!! [eDVBCIInterfaces] gotPMT [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: scale VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok [SCREENNAME] ['SpecialJump_AudioSubsInfobox_Zapspeed'] [Dish] tuning failed [eDVBLocalTimerHandler] diff is 0 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time [eDVBLocalTimerHandler] not changed [SEC] set dynamic current limiting [eDVBServiceRecord] now running: Kopfball (1800 seconds) [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: scale sdt update done! eHdmiCEC: received message ignore unsupported 32bpp -> 16bpp alphablend! AITready RECORD service event 11 sdt update done! [EPGC] start caching events(1429613944) ignore unsupported 32bpp -> 16bpp alphablend! [EPGC] start caching events(1429613944) ignore unsupported 32bpp -> 16bpp alphablend! OCready ignore unsupported 32bpp -> 16bpp alphablend! [EPGC] abort non avail schedule other reading [EPGC] abort non avail netmed schedule reading [EPGC] abort non avail netmed schedule other reading [EPGC] abort non avail FreeSat schedule_other reading [EPGC] abort non avail viasat reading [EPGC] nownext finished(1429613951) [EPGC] abort non avail schedule other reading [EPGC] abort non avail netmed schedule reading [EPGC] abort non avail netmed schedule other reading [EPGC] abort non avail FreeSat schedule_other reading [EPGC] abort non avail viasat reading [EPGC] nownext finished(1429613952) eHdmiCEC: received message 36 enter standby [eDVBCAService] free slot 0 demux 0 for service 1:0:1:4461:453:1:C00000:0:0:0: [eDVBCAService] free service 1:0:1:4461:453:1:C00000:0:0:0: decoder state: play, vpid=-1, apid=-1 DEMUX_STOP - pcr - ok DEMUX_STOP - video - ok VIDEO_STOP - ok AUDIO_STOP - ok DEMUX_STOP - audio - ok AUDIO_CONTINUE - ok DEMUX_STOP - ttx - ok TuxTxt stopped service 25 cleaning up TuxTxt cache cleared [eDVBLocalTimerHandler] remove channel 0x19d3200 [eEPGCache] remove channel 0x19d3200 [EPGC] abort caching events !! [SCREENNAME] StandbySummary [LED-GIGA] In Standby setLCDBrightness 25 eHdmiCEC: send message 36 [SCREENNAME] Standby ignore unsupported 32bpp -> 16bpp alphablend! eHdmiCEC: received message A0 08 00 46 00 09 00 01 eHdmiCEC: received message ignore unsupported 32bpp -> 16bpp alphablend! eHdmiCEC: received message 84 23 00 04 eHdmiCEC: received message 84 21 00 04 eHdmiCEC: received message 87 08 00 46 close frontend 0 [turnOffSatCR] running mainloop
Und hier Ausschnitte aus meinem settings file:
Code:config.timeshift.timeshiftMaxEvents=12 config.timeshift.timeshiftMaxHours=12 config.misc.firstrun=false config.misc.initialchannelselection=false config.misc.startCounter=75 config.misc.languageselected=false config.misc.videowizardenabled=false config.radio.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.radio" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.radio" ORDER BY bouquet; config.radio.lastservice=1:7:2:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.radio_deutsch.radio" ORDER BY bouquet config.skin.primary_skin=KravenFullHD/skin.xml config.osd.alpha_teletext=255 config.osd.dst_width=695 config.osd.dst_top=10 config.osd.alpha_webbrowser=255 config.osd.dst_left=13 config.osd.alpha=255 config.osd.dst_height=557 config.EMC.list_skip_size=5 config.EMC.movie_preview_offset=5 config.EMC.movie_preview_delay=2000 config.EMC.sublang1=de_DE config.EMC.movie_picons=true config.EMC.CoolStartHome=true config.EMC.movie_delete_validation=false config.EMC.audlang2=de_DE config.EMC.audlang3=de_DE config.EMC.audlang1=de_DE config.EMC.skin_able=true config.EMC.movie_finished_limit=10 config.EMC.sublang2=de_DE config.EMC.key_period=100 config.EMC.movie_cover_delay=500 config.EMC.movie_trashcan_limit=3 config.EMC.key_repeat=500 config.EMC.movie_descdelay=200 config.EMC.movie_watching_percent=5 config.EMC.movie_finished_percent=80 config.EMC.sublang3=de_DE config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.mein_tv.tv" ORDER BY bouquet; config.tv.lastservice=1:0:1:32DB:45D:1:C00000:0:0:0: config.usage.serviceinfo_fontsize=0 config.usage.movielist_trashcan_reserve=40 config.usage.allowed_timeshift_paths=['/media/hdd/timeshift/', '/usbstick/timeshift/', '/omb/timeshift/'] config.usage.servicename_fontsize=0 config.usage.allowed_autorecord_paths=['/media/hdd/movie/'] config.usage.on_long_powerpress=shutdown config.usage.show_infobar_on_skip=false config.usage.movielist_trashcan_days=8 config.usage.show_infobar_dimming_speed=10 config.usage.last_movie_played=1:0:0:0:0:0:0:0:0:0:/media/hdd/movie/20150404 2012 - Disney Channel - Bambi.ts config.usage.on_movie_start=ask yes config.usage.serviceitems_per_page=16 config.usage.blinking_rec_symbol_during_recording=true config.usage.servicenum_fontsize=0 config.usage.shutdownOK=false config.usage.timeshift_path=/omb/timeshift/ config.hdmicec.minimum_send_interval=250 config.hdmicec.enabled=true config.hdmicec.volume_forwarding=true config.crash.sizeloglimit=10 config.crash.debugloglimit=4 config.crash.daysloglimit=8 config.crash.debug_path=/usbstick/logs/ config.lcd.modepip=5 config.autobouquetsmaker.retry=30 config.movielist.videodirs=['/media/hdd/movie/'] config.movielist.fontsize=0 config.movielist.eventinfo_delay=100 config.movielist.itemsperpage=20 config.recording.keep_timers=7 config.recording.margin_after=5 config.recording.show_rec_symbol_for_rec_types=real config.recording.ask_to_abort_pip=abort_no_msg config.recording.warn_box_restart_rec_types=real config.recording.margin_before=3 config.recording.ask_to_abort_pseudo_rec=abort_no_msg config.recording.ask_to_abort_streaming=ask config.recording.offline_decode_delay=1000 config.epgselection.enhanced_itemsperpage=18 config.epgselection.graph_primetimehour=20 config.epgselection.graph_eventfs=0 config.epgselection.infobar_itemsperpage=2 config.epgselection.graph_itemsperpage=8 config.epgselection.infobar_primetimemins=0 config.epgselection.graph_piconwidth=100 config.epgselection.graph_infowidth=50 config.epgselection.infobar_infowidth=50 config.epgselection.infobar_eventfs=0 config.epgselection.graph_servicewidth=250 config.epgselection.graph_servfs=0 config.epgselection.infobar_primetimehour=20 config.epgselection.infobar_timelinefs=0 config.epgselection.infobar_servfs=0 config.epgselection.enhanced_eventfs=0 config.epgselection.infobar_servicewidth=250 config.epgselection.graph_primetimemins=0 config.epgselection.multi_eventfs=0 config.epgselection.graph_timelinefs=0 config.epgselection.multi_itemsperpage=18 config.epgselection.infobar_piconwidth=100 config.cccaminfo.ecmInfoTime=5 config.cccaminfo.serverNameLength=22 config.av.autores_delay=400 config.av.downmix_aac=false config.av.generalAC3delay=0 config.av.policy_169=scale config.av.downmix_ac3=false config.av.videomode.HDMI=1080p config.av.generalPCMdelay=0 config.plugins.VFD_Giga.ledRUN=2 config.plugins.VFD_Giga.ledREC=2 config.plugins.VFD_Giga.ledSBY=1 config.plugins.MetrixWeather.forecastTodayCode=C config.plugins.MetrixWeather.forecastTomorrowTempMax=13 config.plugins.MetrixWeather.forecastTomorrowText=Partly Cloudy config.plugins.MetrixWeather.currentWeatherTemp=7 config.plugins.MetrixWeather.woeid=676757 config.plugins.MetrixWeather.currentLocation=Munich config.plugins.MetrixWeather.currentWeatherCode=B config.plugins.MetrixWeather.currentWeatherText=Fair config.plugins.MetrixWeather.forecastTomorrowTempMin=2 config.plugins.MetrixWeather.forecastTodayTempMin=-1 config.plugins.MetrixWeather.forecastTodayText=Mostly Clear config.plugins.MetrixWeather.refreshInterval=10 config.plugins.MetrixWeather.forecastTodayTempMax=8 config.plugins.MetrixWeather.forecastTomorrowCode=H config.plugins.configurationbackup.backupdirs=['/etc/enigma2/', '/etc/CCcam.cfg', '/usr/keys/CCcam.cfg', '/etc/network/interfaces', '/etc/wpa_supplicant.conf', '/etc/wpa_supplicant.ath0.conf', '/etc/wpa_supplicant.wlan0.conf', '/etc/resolv.conf', '/etc/default_gw', '/etc/hostname', '/usr/share/enigma2/keymap.usr', '/usr/share/enigma2/keymap.ntr', '/etc/fstab', '/etc/ConfFS/'] config.plugins.autotimer.maxdaysinfuture=0 config.plugins.autotimer.delay=3 config.plugins.autotimer.interval=30 config.plugins.autotimer.show_help=false config.plugins.SpecialJump.algoVersion=2 config.plugins.SpecialJump.mainmenu=true config.plugins.SpecialJump.fastZapEnable=true config.plugins.epgsearch.history_length=10 config.plugins.epgsearch.history=['Kommissar Beck - Die neuen F\xc3\xa4lle (1/8)'] config.plugins.KravenFullHD.InfobarStyle=infobar-style-x1 config.plugins.KravenFullHD.SkinBackgroundColor=1A000000 config.plugins.KravenFullHD.InfobarWeatherWidget=infobar-weather-classic config.plugins.KravenFullHD.SkinColor=00647687 config.plugins.KravenFullHD.SelectionBackground=30647687 config.plugins.KravenFullHD.ChannelSelectionStyle=channelselection-style-xpicon config.plugins.KravenFullHD.InfobarShowChannelname=infobar-channelname-number-small-x1 config.plugins.KravenFullHD.InfobarClockWidget=infobar-clock-analog config.plugins.KravenFullHD.SkinColorProgress=06647687 config.plugins.KravenFullHD.NumberZapExtStyle=numberzapext-xpicon config.plugins.NumberZapExt.picondir=/omb/picon/ config.plugins.NumberZapExt.hotkeys_bouquets=[0, 0, 0, 0, 0, 0] config.plugins.NumberZapExt.enable=true config.plugins.NumberZapExt.picons=true config.plugins.NumberZapExt.kdelay=2000 config.plugins.KravenHD.InfobarStyle=infobar-style-x1 config.plugins.KravenHD.ChannelSelectionStyle=channelselection-style-xpicon config.plugins.KravenHD.InfobarShowChannelname=infobar-channelname-number-x1 config.plugins.KravenHD.InfobarClockWidget=infobar-clock-android config.plugins.KravenHD.SkinColorProgress=05352111 config.plugins.KravenHD.NumberZapExtStyle=numberzapext-xpicon config.Nims.1.configMode=advanced config.Nims.1.advanced.sat.192.lnb=1 config.Nims.1.advanced.lnb.1.lof=unicable config.Nims.1.advanced.lnb.1.unicableMatrix.Inverto.product=IDLP-USS200-CUO10-8PP config.Nims.1.advanced.lnb.1.unicableMatrix.Inverto.vco.IDLP-USS200-CUO10-8PP.1=1178 config.Nims.1.advanced.lnb.1.unicableMatrix.Inverto.scr.IDLP-USS200-CUO10-8PP=2 config.Nims.1.advanced.lnb.1.unicableMatrixManufacturer=Inverto config.Nims.1.advanced.lnb.1.unicable=unicable_matrix config.Nims.0.configMode=advanced config.Nims.0.advanced.sat.192.lnb=1 config.Nims.0.advanced.lnb.1.lof=unicable config.Nims.0.advanced.lnb.1.unicableMatrix.Inverto.product=IDLP-USS200-CUO10-8PP config.Nims.0.advanced.lnb.1.unicableMatrix.Inverto.vco.IDLP-USS200-CUO10-8PP.0=1076 config.Nims.0.advanced.lnb.1.unicableMatrixManufacturer=Inverto config.Nims.0.advanced.lnb.1.unicable=unicable_matrix config.Nims.2.configMode=advanced config.Nims.2.advanced.sat.192.lnb=1 config.Nims.2.advanced.lnb.1.lof=unicable config.Nims.2.advanced.lnb.1.unicableMatrix.Inverto.product=IDLP-USS200-CUO10-8PP config.Nims.2.advanced.lnb.1.unicableMatrix.Inverto.vco.IDLP-USS200-CUO10-8PP.2=1280 config.Nims.2.advanced.lnb.1.unicableMatrix.Inverto.scr.IDLP-USS200-CUO10-8PP=3 config.Nims.2.advanced.lnb.1.unicableMatrixManufacturer=Inverto config.Nims.2.advanced.lnb.1.unicable=unicable_matrix config.seek.selfdefined_46=60 config.seek.selfdefined_13=15 config.seek.sensibility=10 config.seek.selfdefined_79=300 config.network.wol=true config.softwareupdate.checktimer=6 config.OpenWebif.webcache.collapsedmenus= config.oscaminfo.intervall=10 config.autolanguage.audio_defaultddp=true config.autolanguage.audio_usecache=false config.autolanguage.audio_defaultac3=true config.epg.cachesavetimer=24 config.epg.histminutes=0 config.epg.cacheloadtimer=24 config.audio.volume=70
config.usage.blinking_rec_symbol_during_recording= true
config.recording.show_rec_symbol_for_rec_types=rea lGeändert von Mikam_0815 (21.04.2015 um 14:50 Uhr)
-
Advertising
-
21.04.2015, 15:40 #22
- Registriert seit
- 22.12.2013
- Ort
- an der Havel
- Beiträge
- 1.349
- Thanks (gegeben)
- 436
- Thanks (bekommen)
- 787
- Total Downloaded
- 40,84 MB
- Total Downloaded
- 40,84 MB
ThemenstarterBox 1:Gigablue QuadBox 2:Gigablue QuadBox 3:Xtrend ET8000Danke für die Rückmeldung. Ich muss gestehen, dass ich die recTypes zwar bezüglich der Anzeige des "recording"-Symbols in OSD und Display getestet habe, aber noch nicht bezüglich der blinkenden LED (diese ist bei mir immer aus).
Ich hätte gedacht, dass meine Änderung im "RecordState" (gesteuert über "config.recording.show_rec_symbol_for_rec_type s", das Du korrekt auf "real" gesetzt hast) über SessionGlobals / FrontpanelLed auch in gleicher Weise Einfluss auf die LED haben sollte. Das werde ich mir in den nächsten Tagen mal ansehen.
"config.usage.blinking_rec_symbol_during_recording " gibt übrigens nur an, ob das "recording"-Symbol in der Skin blinkt oder konstant leuchtet, hier ist ein boolean (true/false) korrekt. Die recTypes definieren hingegen, ob das Symbol sichtbar ist oder nicht.SpecialJump: Plugin zum schnellen manuellen Überspringen von Werbung (und mehr)
http://www.opena.tv/plugins/6240-spe...-und-mehr.html
Feature der Woche:
* Fast Zap Mode (beschleunigte Umschaltzeiten durch vorausschauendes Vorladen des nächsten Senders auf einem weiteren Tuner)
-
Danke - 1 ThanksMikam_0815 bedankten sich
-
24.04.2015, 14:52 #23
- Registriert seit
- 24.04.2015
- Beiträge
- 5
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 0
- Total Downloaded
- 0
Ich komme auch vom Topfield und vemisse sehr QuickJump.
Leider funktioniert SpecialJump auf meiner Box nicht (VU+ Solo2 mit VTI8.2).
Schon beim Plugin-Menü-Aufruf schmiert die Box ab. Sehr schade.
Kann man da was machen damit auch die VU-Besitzer in den Genuss des Sprungkomforts kommen können?
Gruß
Pixel
-
24.04.2015, 15:14 #24
- Registriert seit
- 22.12.2013
- Ort
- an der Havel
- Beiträge
- 1.349
- Thanks (gegeben)
- 436
- Thanks (bekommen)
- 787
- Total Downloaded
- 40,84 MB
- Total Downloaded
- 40,84 MB
ThemenstarterBox 1:Gigablue QuadBox 2:Gigablue QuadBox 3:Xtrend ET8000Könntest Du mir dazu bitte ein logfile schicken, dann kann ich mir das gerne mal ansehen. Dazu unter Setup - System - Extended System - Log settings die Erzeugung von Logfiles aktivieren und nach Crash und Neustart das Logfile aus /hdd/logs/ posten (das letzte ist vom Neustart, das vorletzte enthält die Infos zum Crash).
Außerdem wüsste ich gerne noch, welches Image Du verwendest und ob SpecialJump aktuell ist und vom Feed installiert wurde.
EDIT: Sorry, ich sehe gerade: VTI. Das supporte ich nicht offiziell, stehe aber zu meinem Angebot, mal in das logfile zu gucken.Geändert von Fischreiher (24.04.2015 um 15:24 Uhr)
SpecialJump: Plugin zum schnellen manuellen Überspringen von Werbung (und mehr)
http://www.opena.tv/plugins/6240-spe...-und-mehr.html
Feature der Woche:
* Fast Zap Mode (beschleunigte Umschaltzeiten durch vorausschauendes Vorladen des nächsten Senders auf einem weiteren Tuner)
-
24.04.2015, 21:20 #25
- Registriert seit
- 22.12.2013
- Ort
- an der Havel
- Beiträge
- 1.349
- Thanks (gegeben)
- 436
- Thanks (bekommen)
- 787
- Total Downloaded
- 40,84 MB
- Total Downloaded
- 40,84 MB
ThemenstarterBox 1:Gigablue QuadBox 2:Gigablue QuadBox 3:Xtrend ET8000Hallo Pixel, danke für das logfile per PM. Die relevante Meldung ist
Code:File "/usr/lib/enigma2/python/Plugins/Extensions/SpecialJump/plugin.py", line 1315, in setSubtitleTrack InfoBarSubtitleSupport.enableSubtitle(self.InfoBar_instance,SubtitleTrackList[track][4][:4]) AttributeError: type object 'InfoBarSubtitleSupport' has no attribute 'enableSubtitle'
Oder Du gibst mal einem openATV Image eine Chance ...SpecialJump: Plugin zum schnellen manuellen Überspringen von Werbung (und mehr)
http://www.opena.tv/plugins/6240-spe...-und-mehr.html
Feature der Woche:
* Fast Zap Mode (beschleunigte Umschaltzeiten durch vorausschauendes Vorladen des nächsten Senders auf einem weiteren Tuner)
-
24.04.2015, 21:47 #26
- Registriert seit
- 22.12.2013
- Ort
- an der Havel
- Beiträge
- 1.349
- Thanks (gegeben)
- 436
- Thanks (bekommen)
- 787
- Total Downloaded
- 40,84 MB
- Total Downloaded
- 40,84 MB
ThemenstarterBox 1:Gigablue QuadBox 2:Gigablue QuadBox 3:Xtrend ET8000Für Gigablue gibt es allerdings eine Sonderbehandlung der LEDs (GigaBlueVFDControl). Ab morgen ist auch hier die Abfrage von config.recording.show_rec_symbol_for_rec_types drin:
https://github.com/oe-alliance/oe-al...5c1655e0c0513bSpecialJump: Plugin zum schnellen manuellen Überspringen von Werbung (und mehr)
http://www.opena.tv/plugins/6240-spe...-und-mehr.html
Feature der Woche:
* Fast Zap Mode (beschleunigte Umschaltzeiten durch vorausschauendes Vorladen des nächsten Senders auf einem weiteren Tuner)
-
Danke - 2 ThanksMikam_0815, HD75hd bedankten sich
-
25.04.2015, 10:37 #27
- Registriert seit
- 24.04.2015
- Beiträge
- 5
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 0
- Total Downloaded
- 0
Danke für Deine Hilfe.
Schade, daß SpecialJump nicht mit VTI funktioniert.
Gruß
-
25.04.2015, 12:12 #28
- Registriert seit
- 18.04.2013
- Ort
- Thüringer Wald
- Beiträge
- 2.401
- Thanks (gegeben)
- 1516
- Thanks (bekommen)
- 625
- Total Downloaded
- 38,93 MB
- Total Downloaded
- 38,93 MB
Box 1:GigaBlue UHD Quad 4kBox 2:GigaBlue UE 4k + Edision OS MegaBox 3:ET8000 / Axas E4HDBox 4:Mut@nt HD 51 / Mut@nt HD1200Box 5:Atemio 6000 / OCTAGON SF208@Pixel
es gibt viele User hier die von Vti kommen..denk ma drüber nachGruß Frank
-
25.04.2015, 15:13 #29
- Registriert seit
- 28.04.2014
- Beiträge
- 371
- Thanks (gegeben)
- 159
- Thanks (bekommen)
- 50
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:GB UE 4K, Toshiba HDD 3TB intern) openATV 6.3Box 2:GB Quad Plus (4 x DVB-S2 , Seagate M9T 2TB intern) openATV 6.3
-
Danke - 2 ThanksFischreiher, banu bedankten sich
-
26.04.2015, 02:45 #30
- Registriert seit
- 28.04.2014
- Beiträge
- 371
- Thanks (gegeben)
- 159
- Thanks (bekommen)
- 50
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:GB UE 4K, Toshiba HDD 3TB intern) openATV 6.3Box 2:GB Quad Plus (4 x DVB-S2 , Seagate M9T 2TB intern) openATV 6.3Das Plugin läuft auf der Quad + jetzt wirklich super, der Zap-Speed ist schon beachtlich. Habe heute auch mal openATV 5.0 auf die Triplex geworfen und das Plugin dort probiert. Hier kommt das zappen mit dem aktivierten "fast zap mode" teilweise ins Straucheln, der nächste Sender bleibt dann relativ lange schwarz bzw. fängt sich erst nach neuem Tastendruck. Insgesamt muss ich aber auch sagen dass sich die GM Triplex vom ersten Eindruck her mit openATV 5.0 recht träge anfühlt, hatte aber kaum Zeit zum Testen.
-
Danke - 1 ThanksFischreiher bedankten sich
Lesezeichen