Die neuen Treiber vom 16.01.2014 haben partiell Besserung gebracht biem optimussos2, das externe DVD Laufwerk wird erkannt und gemountet, die DVD Struktur wird ebenfalls soweit erkannt.
Abspielen erzeugt jedoch nach wie vor einen Dauerspinner welcher die Box hängen lässt (gilt auch für .iso und vob auf der HDD), Screenshot leider via Openwebif nicht möglich, da nicht mehr aufrufbar.
Dafür in der Codebox ein Debuglog. Wäre nett wenn sich das jemand anschaut.
Achja, ich habe getestet ob evtl. der Aufruf der DVD bei Einstellung DVB Subtitles auf "on" einen Unterschied erkennen lässt gegenüber der Abschaltung derselbigen, jedoch spielt das wohl keine Rolle für das Log, kommt dasselbe bei raus.

Code:
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
10800k video mem
 - double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x812608 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "OPTIMUSS OS2 remote control (native)" is a keyboard
Found 1 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input2
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 112 channels/transponders and 1719 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 1
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
found 6 spinner!

setIoPrio best-effort level 3 ok
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[Harddisk] enumerating network mounts...
main thread is non-idle! display spinner!
Reading satellites.xml
removing internal link on frontend id 1
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  diseqc_a_b
slot: 1 configmode: simple
diseqcmode:  diseqc_a_b
sec config completed
[NimManager] slot name=BCM7335 (internal)
[NimManager] multiType = True
[NimManager] slot name=BCM7335 (internal)
[NimManager] multiType = True
[Picon] adding path: /media/hdd/picon/
[Time By]: Transponder
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...executing main
OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language Deutsch
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 720p, rate: 50Hz
Renumbering...
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
couldn't open /proc/stb/misc/12V_output
[EPGC] 8919 events read from /etc/enigma2/epg.dat
setLCDBrightness 25
setLCDBrightness 127
setLCDScrollspeed 150
setLCDRepeat 3
setLCDMode 1
Setting OSD position: 0 720 0 576
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
[Movielist Preview] Could not import Suomipoeka Plugin, maybe not installed or too old version?
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/FragMutti/font/Sans.ttf...OK (Sans)
Module 'mechanize' loaded
Twisted Agent in use (12, 0, 0)
Module 'ast' loaded
Module 'mechanize' loaded
[Ipkg] Added to OPKG destinations: /
[Info-Panel] machinebrand: Edison
[Info-Panel] machinename: Optimuss-OS2
[Info-Panel] boxversion: optimussos2
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/MovieBrowser/font/Sans.ttf...OK (Sans)
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/MovieBrowser/font/MetrixHD.ttf...OK (Metrix)
Plugin  Extensions/WebInterface failed to load: No module named plugin
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting color_soace to: Edid(Auto)
--> applying pep values
[AutoTimer] Auto Poll Enabled
[SwapManager] autostart
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 1 CI Slots 
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
starting hotplug handler
wasTimerWakeup failed!
setLCDBrightness 127
[NAVIGATION] USE DEEPSTAND-WORKAROUND FOR THIS BOXTYPE (optimussos2) !!
==================================================================================
[NAVIGATION] getNextRecordingTime= -1
[NAVIGATION] nextRecordTimerAfterEventActionAuto= False
[NAVIGATION] current Time=1390581021.59
[NAVIGATION] timediff=1390581022.6
==================================================================================
[NAVIGATION] getNextPowerManagerTime= -1
[NAVIGATION] nextPowerManagerAfterEventActionAuto= False
[NAVIGATION] current Time=1390581021.62
[NAVIGATION] timediff=1390581022.63
==================================================================================
[NAVIGATION] wasTimerWakeup = False
[SKIN] Parsing embedded skin <embedded-in-'MovielistPreviewScreen'>
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[SwapManager] autostart
EMC: +++ EMC V3.7.4beta20131015 startup
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Fr 24 Jan 2014 17:30:21 CET
warning, skin is missing element key_yellow in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_blue in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_green in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element key_red in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
[Skin] Attribute not implemented: valign value: bottom
[SCREENNAME]  RdsInfoDisplaySummary
warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'>
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
warning, skin is missing element key_blue in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_red in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_green in <class 'Screens.InfoBar.InfoBar'>
warning, skin is missing element key_yellow in <class 'Screens.InfoBar.InfoBar'>
[SCREENNAME]  RdsInfoDisplay
[SCREENNAME]  InfoBarSummary
[SCREENNAME]  InfoBar
setValue 80
Setvolume: 80 80 (raw)
Setvolume: 13 13 (-1db)
lastshutdown=True        (True = last shutdown was OK)
NOK shutdown action=normal
bootup action=normal
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
playing 1:0:19:2BA2:3F2:1:C00000:0:0:0:
[SCREENNAME]  InfoBar
RemovePopup, id = ZapError
allocate channel.. 03f2:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11347000 Pol 1 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1597 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:2BA2:3F2:1:C00000:0:0:0:
allocate demux
[CAMSTARTER] Start/Check: 1
2014-01-24 17:30:25.501687
[CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.3.0
[CAMSTARTER] Cam is running, exit camstarter
CI Slot 0: reset requested
ci flush
ci inserted in slot 0
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
child has terminated
pipes closed
[SwapManager] Found a swapfile on  /media/hdd/swapfile
[SwapManager] Swapfile is already active on  /media/hdd/swapfile
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
poll: unhandled POLLERR/HUP/NVAL for fd 44(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
EMC: Setting EPG language: de_DE
[SEC] set static current limiting
[LogManager] probing folders
child has terminated
pipes closed
0.0.0.0
192.168
ER plugin not found
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
[LogManager] /home/root/logs: bytesToRemove -10280313
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[VLC] Checking for buildin servicets ...  no
[VLC] Checking for existing and usable servicets.so ...  No module named servicets
[VLC] Checking for usable gstreamer service ...  yes
EMC: Next trashcan cleanup in 450 minutes
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0(?)
[SEC] sleep 100ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 19, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2c265b8 running
[eEPGCache] channel 0x2c265b8 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (1a36), and 1 audio stream(s) (1a40), and the pcr pid is 1a36, and the text pid is 1a4a
allocate demux
decoder state: play, vpid=6710, apid=6720
DMX_SET_PES_FILTER(0x1a36) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1a40) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1a36) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1a4a) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - [EPGC] start caching events(1390581030)
ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
[Volume Adjust] Update Info
[Volume Adjust] Volume = 80
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[eDVBCAService] new service 1:0:19:2BA2:3F2:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:2BA2:3F2:1:C00000:0:0:0:
RemovePopup, id = ZapError
[SEC] sleep 500ms
EMC delPathFromCache /hdd/movie/trashcan
EMC: [EMCMS] trashcan cleanup: nothing to delete...
VIDEO_GET_EVENT - ok
PATready
use pmtpid 1a2c for service_id 2ba2
eventNewProgramInfo 0 0
have 1 video stream(s) (1a36), and 4 audio stream(s) (1a40, 1a41, 1a43, 1a42), and the pcr pid is 1a36, and the text pid is 1a4a
decoder state: play, vpid=6710, apid=6720
[Volume Adjust] Update Info
[Volume Adjust] Volume = 80
[Volume Adjust] load xml...
[eDVBCIInterfaces] gotPMT
[Dish] tuning failed
[SEC] set dynamic current limiting
AITready
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
sdt update done!
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] abort non avail nownext reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[Volume Adjust] Update Info
[Volume Adjust] Volume = 80
[Volume Adjust] load xml...
HOTPLUG connection!
hotplug: X_E2_MEDIA_STATUS=0
complete X_E2_MEDIA_STATUS=0
HOTPLUG connection lost!
hotplug: {'X_E2_MEDIA_STATUS': '0', 'PHYSDEVPATH': '/block/sr0/device', 'DEVPATH': '/block/sr0'}
HOTPLUG connection!
hotplug: X_E2_MEDIA_STATUS=1
complete X_E2_MEDIA_STATUS=1
HOTPLUG connection lost!
hotplug: {'X_E2_MEDIA_STATUS': '1', 'PHYSDEVPATH': '/block/sr0/device', 'DEVPATH': '/block/sr0'}
mountpoint /autofs/sr0/
description DVD-RAM UJ890AS
force_mounted True
scanning ('DVD-RAM UJ890AS', '/autofs/sr0/', <__main__.Session instance at 0x29e1c38>)
scanner: [<Scanner Ipkg>, <Scanner Movie>, <Scanner Video CD>, <Scanner Music>, <Scanner Audio-CD>, <Scanner Pictures>, <Scanner DVD>]
[SCREENNAME]  ['ChoiceBox_summary', 'SimpleSummary']
[SCREENNAME]  ['ChoiceBox']
1 2 1
KEY: 2 1
action ->  InputActions 1
unknown action InputActions/1! typo in keymap?
[SCREENNAME]  InfoBarSummary
0 2 1
KEY: 2 1
execute ('DVD abspielen', <Scanner DVD>, [<ScanFile /autofs/sr0/VIDEO_TS/VIDEO_TS.IFO (video/x-dvd, None MB)>], <__main__.Session instance at 0x29e1c38>)
splitted ['', 'autofs', 'sr0', 'VIDEO_TS', 'VIDEO_TS.IFO']
warning, skin is missing element eventname in <class 'Screens.PVRState.PVRState'>
warning, skin is missing element state in <class 'Screens.PVRState.PVRState'>
[SKIN] Parsing embedded skin <embedded-in-'DVDOverlay'>
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:2BA2:3F2:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:2BA2:3F2:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
warning, skin is missing element anglePix in <class 'Plugins.Extensions.DVDPlayer.plugin.DVDPlayer'>
warning, skin is missing element angleLabel in <class 'Plugins.Extensions.DVDPlayer.plugin.DVDPlayer'>
warning, skin is missing element Chapter in <class 'Plugins.Extensions.DVDPlayer.plugin.DVDSummary'>
warning, skin is missing element Time in <class 'Plugins.Extensions.DVDPlayer.plugin.DVDSummary'>
warning, skin is missing element DVDPlayer in <class 'Plugins.Extensions.DVDPlayer.plugin.DVDSummary'>
warning, skin is missing element Title in <class 'Plugins.Extensions.DVDPlayer.plugin.DVDSummary'>
[SCREENNAME]  DVDSummary
FileBrowserClosed /autofs/sr0
play 4369:0:0:0:0:0:0:0:0:0:/autofs/sr0
playing 4369:0:0:0:0:0:0:0:0:0:/autofs/sr0
SERVICEDVD construct!
set pause!

eServiceDVD starting
self.service <enigma.iPlayableServicePtr; proxy of <Swig Object of type 'ePtr< iPlayableService > *' at 0x2c590b0> >
cur_dlg <class 'Plugins.Extensions.DVDPlayer.plugin.DVDPlayer'>
eServiceDVD::enableSubtitles -1
accel alloc failed

ERROR: accelAlloc failed
eServiceDVD dvd thread started
[SCREENNAME]  DVDPlayer
[SCREENNAME]  PVRState
DVD_SCREEN_UPDATE!
values got from ddvd: 0 0 720 576
[DVBCAHandler] no more services
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x2c265b8
[eEPGCache] remove channel 0x2c265b8
[EPGC] abort caching events !!
main thread is non-idle! display spinner!