Seite 3 von 5 ErsteErste 12345 LetzteLetzte
Ergebnis 21 bis 30 von 44
  1. #21

    Registriert seit
    19.09.2014
    Ort
    Thüringer
    Beiträge
    3.409
    Thanks (gegeben)
    3434
    Thanks (bekommen)
    990
    Total Downloaded
    229,02 MB
    Total Downloaded
    229,02 MB
    ReceiverDanke
    Box 1:
    3 mal Mut@nt HD 51 UHD
     
     
    Box 2:
    GB HD Quad Plus
     
     
    Box 3:
    Octagon SF8008
     
     
    Box 4:
    Octagon SF8008 SUPREME
     
     
    Hallo Mikam0815.

    Habe ja opena.tv 5.1 immer per "Software aktualisieren" aktuell im Flash.
    Wollte heute mal ein opena.tv 5.2, welches schon länger im omb ist starten.
    Habe hier erstmal die Box per Menü heruntergefahren, dann neu gestartet und im omb Menü nun das opena.tv 5.2 ausgewählt.
    Hier bleibt nun die Box wieder mit opena.tv im Bootbild hängen.
    Box startet nach Schalter aus/ein diesmal auch nicht ohne den omb Stick, bleibt immer bei 33 im Ladebalken hängen, hier das log dazu:
    Code:
    BCM73460012
    
    AVS 0.5.5
    B1
    PV=000002DD
    PV=000002E7
    MV=00000381
    
    M00
    SHMOO VER 1.14
    MCB
    
    PKID 20121012 003B6000 003B0000 041B203F 00001C00
    
    S3000018B
    00000F40
    +00000004
    RDLY W0 00000005
    RDLY W1 00000005
    
    RDEN W0 0000002C
    RDEN W1 0000003F
    
    RDQS W0
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 --------+++++++++++++++++++++X+++++++++++++++++++++-------------
     01 --------+++++++++++++++++++++X++++++++++++++++++++--------------
     02 ----------+++++++++++++++++++X+++++++++++++++++++---------------
     03 --------+-++++++++++++++++++++X+++++++++++++++++++--------------
     04 -----++++++++++++++++++++X++++++++++++++++++++------------------
     05 --------++++++++++++++++++++X++++++++++++++++++++---------------
     06 ------++++++++++++++++++++X++++++++++++++++++++-----------------
     07 --------+++++++++++++++++++++X+++++++++++++++++++++-------------
     08 ----------+++++++++++++++++X+++++++++++++++++-------------------
     09 ---------+++++++++++++++++++X++++++++++++++++++-----------------
     10 ---------++++++++++++++++++X+++++++++++++++++-------------------
     11 ----------++++++++++++++++++X+++++++++++++++++------------------
     12 -------++++++++++++++++++++X+++++++++++++++++++-----------------
     13 ----+++++++++++++++++++X++++++++++++++++++----------------------
     14 --------+++++++++++++++++++X+++++++++++++++++++-----------------
     15 ----------++++++++++++++++++X++++++++++++++++++-----------------
    
    
    P W0
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ------++++++++++++++++++++++X++++++++++++++++++++++-------------
     01 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
     02 ------+++++++++++++++++++++X+++++++++++++++++++++---------------
     03 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
     04 -+++++++++++++++++++++++X+++++++++++++++++++++++----------------
     05 -----++++++++++++++++++++++X+++++++++++++++++++++---------------
     06 ---++++++++++++++++++++++X+++++++++++++++++++++-----------------
     07 -----+++++++++++++++++++++++X++++++++++++++++++++++-------------
     08 ----++++++++++++++++++++X++++++++++++++++++++-------------------
     09 -----+++++++++++++++++++++X+++++++++++++++++++++----------------
     10 ----++++++++++++++++++++X++++++++++++++++++++-------------------
     11 ----+++++++++++++++++++++X++++++++++++++++++++------------------
     12 --+++++++++++++++++++++++X++++++++++++++++++++++----------------
     13 ---++++++++++++++++++++++X+++++++++++++++++++++-----------------
     14 --++++++++++++++++++++++X++++++++++++++++++++++-----------------
     15 -------+++++++++++++++++++++X+++++++++++++++++++++--------------
    
    
    N W0
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 --------++++++++++++++++++++++X+++++++++++++++++++++------------
     01 --------+++++++++++++++++++++X+++++++++++++++++++++-------------
     02 ---------+++++++++++++++++++++X+++++++++++++++++++++------------
     03 ---------+++++++++++++++++++++X++++++++++++++++++++-------------
     04 -----++++++++++++++++++++X++++++++++++++++++++------------------
     05 -------+++++++++++++++++++++X+++++++++++++++++++++--------------
     06 ------+++++++++++++++++++++X++++++++++++++++++++----------------
     07 ---------+++++++++++++++++++++X++++++++++++++++++++-------------
     08 -----------+++++++++++++++++++X++++++++++++++++++---------------
     09 ----------+++++++++++++++++++X++++++++++++++++++----------------
     10 ----------++++++++++++++++++X++++++++++++++++++-----------------
     11 ----------+++++++++++++++++++X++++++++++++++++++----------------
     12 -------++++++++++++++++++++X+++++++++++++++++++-----------------
     13 ----+++++++++++++++++++X++++++++++++++++++----------------------
     14 ---------+++++++++++++++++++X+++++++++++++++++++----------------
     15 ---------+++++++++++++++++++X++++++++++++++++++-----------------
    
    
    RDQS W1
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -------------+++++++++++++++++++X+++++++++++++++++++------------
     01 -------------++++++++++++++++++X++++++++++++++++++--------------
     02 ------------++++++++++++++++X++++++++++++++++-------------------
     03 ---------------+++++++++++++++++++X+++++++++++++++++++----------
     04 -------++++++++++++++++++++X+++++++++++++++++++-----------------
     05 --------------++++++++++++++++++X++++++++++++++++++-------------
     06 ---------+++++++++++++++++++X+++++++++++++++++++----------------
     07 -------------+++++++++++++++++++X++++++++++++++++++-------------
     08 -------++++++++++++++++++X+++++++++++++++++---------------------
     09 ------------++++++++++++++++++X++++++++++++++++++---------------
     10 ----------+++++++++++++++X+++++++++++++++-----------------------
     11 -----------+++++++++++++++++X+++++++++++++++++------------------
     12 --------+++++++++++++++++X++++++++++++++++----------------------
     13 ---------+++++++++++++++++++X++++++++++++++++++-----------------
     14 ------+++++++++++++++++X+++++++++++++++++-----------------------
     15 -----------++++++++++++++++++X+++++++++++++++++-----------------
    
    
    P W1
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -------++++++++++++++++++++++X++++++++++++++++++++++------------
     01 ----+++++++++++++++++++++++X++++++++++++++++++++++--------------
     02 -++++++++++++++++++++++X+++++++++++++++++++++-------------------
     03 ------++++++++++++++++++++++++X+++++++++++++++++++++++----------
     04 +++++++++++++++++++++++X+++++++++++++++++++++++-----------------
     05 ----+++++++++++++++++++++++X+++++++++++++++++++++++-------------
     06 ---+++++++++++++++++++++++X+++++++++++++++++++++++--------------
     07 -----+++++++++++++++++++++++X++++++++++++++++++++++-------------
     08 +++++++++++++++++++++X+++++++++++++++++++++---------------------
     09 --------++++++++++++++++++++X++++++++++++++++++++---------------
     10 --+++++++++++++++++++X+++++++++++++++++++-----------------------
     11 ---+++++++++++++++++++++X+++++++++++++++++++++------------------
     12 +++++++++++++++++++++X++++++++++++++++++++----------------------
     13 ----+++++++++++++++++++++X+++++++++++++++++++++-----------------
     14 ++++++++++++++++++++X++++++++++++++++++++-----------------------
     15 ------++++++++++++++++++++X++++++++++++++++++++-----------------
    
    
    N W1
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -------------++++++++++++++++++++X+++++++++++++++++++-----------
     01 -------------+++++++++++++++++++X+++++++++++++++++++------------
     02 -------------++++++++++++++++++X++++++++++++++++++--------------
     03 --------------++++++++++++++++++++X+++++++++++++++++++----------
     04 -------++++++++++++++++++++X+++++++++++++++++++-----------------
     05 --------------+++++++++++++++++++X+++++++++++++++++++-----------
     06 ----------+++++++++++++++++++X++++++++++++++++++----------------
     07 ------------+++++++++++++++++++X+++++++++++++++++++-------------
     08 ------++++++++++++++++++++X++++++++++++++++++++-----------------
     09 -----------+++++++++++++++++++X++++++++++++++++++---------------
     10 ----------++++++++++++++++++X++++++++++++++++++-----------------
     11 -----------+++++++++++++++++++X+++++++++++++++++++--------------
     12 --------+++++++++++++++++++X+++++++++++++++++++-----------------
     13 ----------++++++++++++++++++++X++++++++++++++++++++-------------
     14 ------+++++++++++++++++++X+++++++++++++++++++-------------------
     15 -----------++++++++++++++++++X++++++++++++++++++----------------
    
    
    WRDQ W0
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 +++++++++++++++++X+++++++++++++++++-----------++++++++++++++++++
     01 ++++++++++++++++++X+++++++++++++++++-----------+++++++++++++++++
     02 ++++++++++++++++++X++++++++++++++++++----------+++++++++++++++++
     03 ++++++++++++++++++X++++++++++++++++++---------++++++++++++++++++
     04 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     05 ++++++++++++++++X++++++++++++++++-------------++++++++++++++++++
     06 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
     07 +++++++++++++++++++X++++++++++++++++++---------+++++++++++++++++
     08 ++++++++++++++++X++++++++++++++++-------------++++++++++++++++++
     09 ++++++++++++++++++X+++++++++++++++++------------++++++++++++++++
     10 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
     11 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
     12 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     13 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
     14 +++++++++++++++++X+++++++++++++++++-----------++++++++++++++++++
     15 +++++++++++++++++++X+++++++++++++++++++--------+++++++++++++++++
    
    
    WRDQ W1
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     01 +++++++++++++++++X+++++++++++++++++-----------++++++++++++++++++
     02 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     03 ++++++++++++++++++X++++++++++++++++++----------+++++++++++++++++
     04 ++++++++++++++++X+++++++++++++++---------------+++++++++++++++++
     05 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     06 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     07 ++++++++++++++++++X++++++++++++++++++-----------++++++++++++++++
     08 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
     09 ++++++++++++++++++X+++++++++++++++++-------------+++++++++++++++
     10 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     11 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
     12 +++++++++++++++++X+++++++++++++++++-------------++++++++++++++++
     13 +++++++++++++++++++X++++++++++++++++++----------++++++++++++++++
     14 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
     15 ++++++++++++++++++X++++++++++++++++++------------+++++++++++++++
    
    
    WRDM W0 00000011
    WRDM W0 00000011
    
    WRDM W1 00000011
    WRDM W1 00000011
    
    
    ADDR
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ----++++++++++++++++++++++++S++++X++++++++++++++++++++++++++++++
    
    CZSL2=1
    LLMB=0000C000
    BP=02000000
    L2Cfg=1E7AD627
    L2Buf=77707711
    BrCfg=F01C200E
    BrMod=02800801
    BrZp0=4C000000
    BrZp1=00002000
    #@
    
    BCM97356B2 CFE v3.39, Endian Mode: Little
    Build Date: Sat May 17 00:00:00 CEST 2014 (root@gbquadplus)
    Copyright (C) Broadcom Corporation.
    
    ReShmoo MEMC0
    
    CPU speed:            1305MHz
    DDR Frequency:        800 MHz
    DDR Mode:             DDR3
    Total memory(MEMC 0): 1024MB
    MEMC 0 DDR Width:     32
    Boot Device:          NAND
    Total flash:          512MB
    RTS VERSION:          Initial RTS Version
    ETH0_PHY:             RGMII
    ETH0_MDIO_MODE:       1
    ETH0_SPEED:           1000
    ETH0_PHYADDR:         probe
    
    Initializing USB.
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    
    CFE initialized.
    USB device matching <USB Disk> not found!
    Starting splash screen.
    Found splash image - Width = 720 Height = 576
    
    Reading flash0.lcdsplash: Done. 288056 bytes read
    
    Loader:elf Filesys:raw Dev:flash0.kernel File: Options:(null)
    Loading: 0x80001000/9546896 0x8091bc90/198048 Entry address is 0x80719950
    Starting program at 0x80719950
    
    Initializing cgroup subsys cpuset
    Linux version 4.0.1 (oe1@BUILD3) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Feb 20 02:15:59 CET 2016
    Fetching vars from bootloader... found 16 vars.
    Options: moca=0 sata=1 pcie=0 usb=1
    Using 1024 MB + 0 MB RAM (from CFE)
    CPU0 revision is: 00025a11 (Broadcom BMIPS5000)
    FPU revision is: 00130001
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
     memory: 30000000 @ 20000000 (usable)
    bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
    bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
    Zone ranges:
      Normal   [mem 0x0000000000000000-0x000000004fffffff]
      HighMem  empty
    Movable zone start for each node
    Early memory node ranges
      node   0: [mem 0x0000000000000000-0x000000000fffffff]
      node   0: [mem 0x0000000020000000-0x000000004fffffff]
    Initmem setup node 0 [mem 0x0000000000000000-0x000000004fffffff]
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    PERCPU: Embedded 10 pages/cpu @8190c000 s11408 r8192 d21360 u40960
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
    Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=256M@512M console=ttyS0,115200n8
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 570164K/1048576K available (7317K kernel code, 379K rwdata, 1392K rodata, 236K init, 176K bss, 478412K reserved, 0K cma-reserved, 0K highmem)
    Hierarchical RCU implementation.
    NR_IRQS:160
    Measuring MIPS counter frequency...
    Detected MIPS clock frequency: 1305 MHz (163.127 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 864.25 BogoMIPS (lpj=432128)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Initializing cgroup subsys memory
    Initializing cgroup subsys net_cls
    SMP: Booting CPU1...
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    CPU1 revision is: 00025a11 (Broadcom BMIPS5000)
    FPU revision is: 00130001
    SMP: CPU1 is running
    Brought up 2 CPUs
    devtmpfs: initialized
    NET: Registered protocol family 16
    USB0: power enable is active high; overcurrent is active low
    USB1: power enable is active high; overcurrent is active low
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.20
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to clocksource wktmr
    FS-Cache: Loaded
    NET: Registered protocol family 2
    TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP: reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    futex hash table entries: 512 (order: 4, 65536 bytes)
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.23)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    console [ttyS0] disabled
    serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
    loop: module loaded
    ahci ahci.0: SSS flag set, parallel bus scan disabled
    ahci ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
    ahci ahci.0: flags: ncq sntf stag clo pmp slum part
    scsi host0: ahci
    scsi host1: ahci
    scsi host2: ahci
    ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
    ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
    ata3: DUMMY
    brcmstb_nand: NAND controller driver is loaded
    libphy: Fixed MDIO Bus: probed
    Found PHY at Address 3
    bcmgenet: configuring instance #0 for external RGMII
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    No PHY detected, not registering interface:1
    bcmgenet: probe of bcmgenet.1 failed with error -5
    usbcore: registered new interface driver zd1201
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS0: setting up NAND flash (primary)
    nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
    nand: AMD/Spansion S34ML04G1
    nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
    nand: AMD/Spansion S34ML04G1
    nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    Creating 4 MTD partitions on "brcmnand.0":
    0x000000e00000-0x00001fe00000 : "rootfs"
    0x000000e00000-0x00001fe00000 : "rootfs(redundant)"
    0x000000200000-0x000000900000 : "kernel"
    0x000000900000-0x000000a00000 : "mac"
    ubi0: default fastmap pool size: 195
    ubi0: default fastmap WL pool size: 25
    ubi0: attaching mtd0
    ubi0: attached by fastmap
    ubi0: fastmap pool size: 195
    ubi0: fastmap WL pool size: 25
    ubi0: attached mtd0 (name "rootfs", size 496 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 3968, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 30/4, WL threshold: 4096, image sequence number: 993998183
    ubi0: available PEBs: 0, total reserved PEBs: 3968, PEBs reserved for bad PEB handling: 80
    ALSA device list:
    ubi0: background thread "ubi_bgt0d" started, PID 61
      No soundcards found.
    UBIFS: background thread "ubifs_bgt0_0" started, PID 62
    UBIFS: recovery needed
    random: nonblocking pool is initialized
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 491524096 bytes (468 MiB, 3871 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 421BEEA3-81DC-4D49-89D7-BFCF6EEAA548, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    devtmpfs: mounted
    Freeing unused kernel memory: 236K (808e5000 - 80920000)
    open-multiboot - debug: mount /proc
    open-multiboot - debug: mount /sys
    open-multiboot - debug: mount /media
    open-multiboot - debug: run volatile media
    open-multiboot - debug: run mdev
    open-multiboot - debug: prepare destination
    INIT: version 2.88 booting
    version: 20160225191151-14.4
    LCD: ILI9327
    input: gigablue remote control as /devices/virtual/input/input0
    DVB: registering new adapter (gbquadplus)
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
    <0>### UPG_BSC (W1, bit 25) fired 10000 times
    SGI XFS with security attributes, realtime, no debug enabled
    boxmodel: module license 'proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    ALSA: Restoring mixer settings...
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    INIT: Entering runlevel: 3
    Configuring network interfaces... bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
    done.
    Starting system message bus: NET: Registered protocol family 10
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 347 at /home/oe1/nightly51/build-enviroment/builds/openatv/release/gb7356/tmp/work-shared/gb7356/kernel-source/net/ipv6/addrconf.c:4335 __ipv6_ifa_notify+0x4a8/0x4cc [ipv6]()
    Modules linked in: ipv6(+) boxmodel(PO) xfs libcrc32c dvb(O)
    CPU: 0 PID: 347 Comm: modprobe Tainted: P           O    4.0.1 #1
    Stack : 00000000 00000000 80924f72 00000041 00000000 00000000 809239d8 00000009
              cfc7f520 80896867 807e42ac 00000000 0000015b 809239d8 00000000 cfd1c800
              cfd1c800 800719ac 00000000 00000000 80924f70 00000000 807eacc4 cdac1adc
              8089b8b0 8071b9fc 00000003 807ed494 00000108 00000108 cdac1adc cfc7f520
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              ...
    Call Trace:
    [<8000ec54>] show_stack+0x64/0x7c
    [<8071c83c>] dump_stack+0xc0/0xf4
    [<80025910>] warn_slowpath_common+0x94/0xd0
    [<800259d0>] warn_slowpath_null+0x18/0x24
    [<e23306c4>] __ipv6_ifa_notify+0x4a8/0x4cc [ipv6]
    [<e2330718>] ipv6_ifa_notify+0x30/0x50 [ipv6]
    [<e2333504>] add_addr+0x94/0x12c [ipv6]
    [<e23369e8>] addrconf_notify+0x510/0xa48 [ipv6]
    [<805be038>] register_netdevice_notifier+0x1a8/0x1e4
    [<e2381ae8>] addrconf_init+0x12c/0x2d8 [ipv6]
    [<e2381498>] inet6_init+0x27c/0x5c4 [ipv6]
    [<8000158c>] do_one_initcall+0xe8/0x25c
    [<8071bb4c>] do_init_module+0x70/0x1c8
    [<8009e2b4>] load_module+0x1d60/0x2224
    [<8009e9bc>] SyS_finit_module+0x9c/0xbc
    [<80014774>] handle_sys+0x134/0x158
    
    ---[ end trace d2d2f381e4657e10 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 347 at /home/oe1/nightly51/build-enviroment/builds/openatv/release/gb7356/tmp/work-shared/gb7356/kernel-source/net/ipv6/route.c:2863 inet6_rt_notify+0x1a8/0x1b0 [ipv6]()
    Modules linked in: ipv6(+) boxmodel(PO) xfs libcrc32c dvb(O)
    CPU: 0 PID: 347 Comm: modprobe Tainted: P        W  O    4.0.1 #1
    Stack : 00000000 00000000 80924f72 00000041 00000000 00000000 809239d8 00000009
              cfc7f520 80896867 807e42ac 00000000 0000015b 809239d8 00000018 cdab9500
              cdab9600 800719ac 00000000 00000000 80924f70 00000000 807eacc4 cdac19f4
              8089b8b0 8071b9fc 00000003 807ed494 00000120 00000120 cdac19f4 cfc7f520
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              ...
    Call Trace:
    [<8000ec54>] show_stack+0x64/0x7c
    [<8071c83c>] dump_stack+0xc0/0xf4
    [<80025910>] warn_slowpath_common+0x94/0xd0
    [<800259d0>] warn_slowpath_null+0x18/0x24
    [<e233edd8>] inet6_rt_notify+0x1a8/0x1b0 [ipv6]
    [<e2340980>] fib6_add+0x5d8/0xbcc [ipv6]
    [<e233b720>] ip6_ins_rt+0x68/0x98 [ipv6]
    [<e23306e0>] __ipv6_ifa_notify+0x4c4/0x4cc [ipv6]
    [<e2330718>] ipv6_ifa_notify+0x30/0x50 [ipv6]
    [<e2333504>] add_addr+0x94/0x12c [ipv6]
    [<e23369e8>] addrconf_notify+0x510/0xa48 [ipv6]
    [<805be038>] register_netdevice_notifier+0x1a8/0x1e4
    [<e2381ae8>] addrconf_init+0x12c/0x2d8 [ipv6]
    [<e2381498>] inet6_init+0x27c/0x5c4 [ipv6]
    [<8000158c>] do_one_initcall+0xe8/0x25c
    [<8071bb4c>] do_init_module+0x70/0x1c8
    [<8009e2b4>] load_module+0x1d60/0x2224
    [<8009e9bc>] SyS_finit_module+0x9c/0xbc
    [<80014774>] handle_sys+0x134/0x158
    
    ---[ end trace d2d2f381e4657e11 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 347 at /home/oe1/nightly51/build-enviroment/builds/openatv/release/gb7356/tmp/work-shared/gb7356/kernel-source/net/ipv6/addrconf.c:4739 inet6_ifinfo_notify+0x144/0x14c [ipv6]()
    Modules linked in: ipv6(+) boxmodel(PO) xfs libcrc32c dvb(O)
    CPU: 0 PID: 347 Comm: modprobe Tainted: P        W  O    4.0.1 #1
    Stack : 00000000 00000000 80924f72 00000041 00000000 00000000 809239d8 00000009
              cfc7f520 80896867 807e42ac 00000000 0000015b 809239d8 e2330000 cfd1c800
              cfd1c800 800719ac 00000000 00000000 80924f70 00000000 807eacc4 cdac1b3c
              8089b8b0 8071b9fc 00000003 807ed494 0000013b 0000013b cdac1b3c cfc7f520
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              ...
    Call Trace:
    [<8000ec54>] show_stack+0x64/0x7c
    [<8071c83c>] dump_stack+0xc0/0xf4
    [<80025910>] warn_slowpath_common+0x94/0xd0
    [<800259d0>] warn_slowpath_null+0x18/0x24
    [<e23364d0>] inet6_ifinfo_notify+0x144/0x14c [ipv6]
    [<e23368e8>] addrconf_notify+0x410/0xa48 [ipv6]
    [<805be038>] register_netdevice_notifier+0x1a8/0x1e4
    [<e2381ae8>] addrconf_init+0x12c/0x2d8 [ipv6]
    [<e2381498>] inet6_init+0x27c/0x5c4 [ipv6]
    [<8000158c>] do_one_initcall+0xe8/0x25c
    [<8071bb4c>] do_init_module+0x70/0x1c8
    [<8009e2b4>] load_module+0x1d60/0x2224
    [<8009e9bc>] SyS_finit_module+0x9c/0xbc
    [<80014774>] handle_sys+0x134/0x158
    
    ---[ end trace d2d2f381e4657e12 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 347 at /home/oe1/nightly51/build-enviroment/builds/openatv/release/gb7356/tmp/work-shared/gb7356/kernel-source/net/ipv6/route.c:2863 inet6_rt_notify+0x1a8/0x1b0 [ipv6]()
    Modules linked in: ipv6(+) boxmodel(PO) xfs libcrc32c dvb(O)
    CPU: 0 PID: 347 Comm: modprobe Tainted: P        W  O    4.0.1 #1
    Stack : 00000000 00000000 80924f72 00000041 00000000 00000000 809239d8 00000009
              cfc7f520 80896867 807e42ac 00000000 0000015b 809239d8 00000018 cdab9200
              cdab9300 800719ac 00000000 00000000 80924f70 00000000 807eacc4 cdac199c
              8089b8b0 8071b9fc 00000003 807ed494 00000151 00000151 cdac199c cfc7f520
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              ...
    Call Trace:
    [<8000ec54>] show_stack+0x64/0x7c
    [<8071c83c>] dump_stack+0xc0/0xf4
    [<80025910>] warn_slowpath_common+0x94/0xd0
    [<800259d0>] warn_slowpath_null+0x18/0x24
    [<e233edd8>] inet6_rt_notify+0x1a8/0x1b0 [ipv6]
    [<e2340980>] fib6_add+0x5d8/0xbcc [ipv6]
    [<e233c8c4>] ip6_route_add+0x4cc/0xbec [ipv6]
    [<e232de6c>] addrconf_add_mroute.isra.39+0x70/0x80 [ipv6]
    [<e232ec88>] addrconf_add_dev+0x88/0xe0 [ipv6]
    [<e2336b6c>] addrconf_notify+0x694/0xa48 [ipv6]
    [<805be038>] register_netdevice_notifier+0x1a8/0x1e4
    [<e2381ae8>] addrconf_init+0x12c/0x2d8 [ipv6]
    [<e2381498>] inet6_init+0x27c/0x5c4 [ipv6]
    [<8000158c>] do_one_initcall+0xe8/0x25c
    [<8071bb4c>] do_init_module+0x70/0x1c8
    [<8009e2b4>] load_module+0x1d60/0x2224
    [<8009e9bc>] SyS_finit_module+0x9c/0xbc
    [<80014774>] handle_sys+0x134/0x158
    
    ---[ end trace d2d2f381e4657e13 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 347 at /home/oe1/nightly51/build-enviroment/builds/openatv/release/gb7356/tmp/work-shared/gb7356/kernel-source/net/ipv6/route.c:2863 inet6_rt_notify+0x1a8/0x1b0 [ipv6]()
    Modules linked in: ipv6(+) boxmodel(PO) xfs libcrc32c dvb(O)
    CPU: 0 PID: 347 Comm: modprobe Tainted: P        W  O    4.0.1 #1
    Stack : 00000000 00000000 80924f72 00000041 00000000 00000000 809239d8 00000009
              cfc7f520 80896867 807e42ac 00000000 0000015b 809239d8 00000018 cdab4f00
              cdab9000 800719ac 00000000 00000000 80924f70 00000000 807eacc4 cdac196c
              8089b8b0 8071b9fc 00000003 807ed494 0000016b 0000016b cdac196c cfc7f520
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              ...
    Call Trace:
    [<8000ec54>] show_stack+0x64/0x7c
    [<8071c83c>] dump_stack+0xc0/0xf4
    [<80025910>] warn_slowpath_common+0x94/0xd0
    [<800259d0>] warn_slowpath_null+0x18/0x24
    [<e233edd8>] inet6_rt_notify+0x1a8/0x1b0 [ipv6]
    [<e2340980>] fib6_add+0x5d8/0xbcc [ipv6]
    [<e233c8c4>] ip6_route_add+0x4cc/0xbec [ipv6]
    [<e232c8b8>] addrconf_prefix_route+0xc0/0x12c [ipv6]
    [<e23315a4>] addrconf_addr_gen.part.41.constprop.53+0xb8/0x154 [ipv6]
    [<e2336b98>] addrconf_notify+0x6c0/0xa48 [ipv6]
    [<805be038>] register_netdevice_notifier+0x1a8/0x1e4
    [<e2381ae8>] addrconf_init+0x12c/0x2d8 [ipv6]
    [<e2381498>] inet6_init+0x27c/0x5c4 [ipv6]
    [<8000158c>] do_one_initcall+0xe8/0x25c
    [<8071bb4c>] do_init_module+0x70/0x1c8
    [<8009e2b4>] load_module+0x1d60/0x2224
    [<8009e9bc>] SyS_finit_module+0x9c/0xbc
    [<80014774>] handle_sys+0x134/0x158
    
    ---[ end trace d2d2f381e4657e14 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 347 at /home/oe1/nightly51/build-enviroment/builds/openatv/release/gb7356/tmp/work-shared/gb7356/kernel-source/net/ipv6/addrconf.c:4739 inet6_ifinfo_notify+0x144/0x14c [ipv6]()
    Modules linked in: ipv6(+) boxmodel(PO) xfs libcrc32c dvb(O)
    CPU: 0 PID: 347 Comm: modprobe Tainted: P        W  O    4.0.1 #1
    Stack : 00000000 00000000 80924f72 00000041 00000000 00000000 809239d8 00000009
              cfc7f520 80896867 807e42ac 00000000 0000015b 809239d8 e2330000 cff74000
              cff74000 800719ac 00000000 00000000 80924f70 00000000 807eacc4 cdac1b3c
              8089b8b0 8071b9fc 00000003 807ed494 00000185 00000185 cdac1b3c cfc7f520
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              ...
    Call Trace:
    [<8000ec54>] show_stack+0x64/0x7c
    [<8071c83c>] dump_stack+0xc0/0xf4
    [<80025910>] warn_slowpath_common+0x94/0xd0
    [<800259d0>] warn_slowpath_null+0x18/0x24
    [<e23364d0>] inet6_ifinfo_notify+0x144/0x14c [ipv6]
    [<e23368e8>] addrconf_notify+0x410/0xa48 [ipv6]
    [<805be038>] register_netdevice_notifier+0x1a8/0x1e4
    [<e2381ae8>] addrconf_init+0x12c/0x2d8 [ipv6]
    [<e2381498>] inet6_init+0x27c/0x5c4 [ipv6]
    [<8000158c>] do_one_initcall+0xe8/0x25c
    [<8071bb4c>] do_init_module+0x70/0x1c8
    [<8009e2b4>] load_module+0x1d60/0x2224
    [<8009e9bc>] SyS_finit_module+0x9c/0xbc
    [<80014774>] handle_sys+0x134/0x158
    
    ---[ end trace d2d2f381e4657e15 ]---
    CPU 0 Unable to handle kernel paging request at virtual address d0000000, epc == 80386e84, ra == e235476c
    Oops[#1]:
    CPU: 0 PID: 354 Comm: dbus-daemon Tainted: P        W  O    4.0.1 #1
    task: ccc210d0 ti: ccd02000 task.ti: ccd02000
    $ 0   : 00000000 10008700 94c38a3a 00000001
    $ 4   : cfffffa0 309efff0 00000000 00000000
    $ 8   : ffffffff ffffffff 00000040 ffffffff
    $12   : ffffffff 0000004f 00000000 00000000
    $16   : cf600810 80894410 808ccc00 8002a250
    $20   : cf600010 cccbd000 00000001 cdab4b00
    $24   : 005ffe00 80014360
    $28   : ccd02000 ccd03d30 309f0000 e235476c
    Hi    : 00026f2e
    Lo    : 3ddfe4a3
    epc   : 80386e84 csum_partial+0x2a4/0x598
        Tainted: P        W  O
    ra    : e235476c mld_sendpack+0x1e8/0x7fc [ipv6]
    Status: 10008703        KERNEL EXL IE
    Cause : 00800008
    BadVA : d0000000
    PrId  : 00025a11 (Broadcom BMIPS5000)
    Modules linked in: ipv6 boxmodel(PO) xfs libcrc32c dvb(O)
    Process dbus-daemon (pid: 354, threadinfo=ccd02000, task=ccc210d0, tls=778d1490)
    Stack : c40bd42a 00000003 00000010 0066786a ccd03f28 00000000 e2354d80 00000006
              cdab3f00 e23551c4 80930000 8009436c 00000000 8190c200 c41ae9c0 00000000
              00000000 c40bc74a 8190c200 80093168 00000000 80082af4 cccbd000 00000001
              cff74000 cdab3f18 cdab4b00 e2354d80 00000006 00000005 80723c20 80723b58
              00000001 cdaba6d8 00000000 e23559a0 00000000 00000000 c40bc74a 80083e5c
              ...
    Call Trace:
    [<80386e84>] csum_partial+0x2a4/0x598
    [<e235476c>] mld_sendpack+0x1e8/0x7fc [ipv6]
    [<e23559a0>] mld_ifc_timer_expire+0x2b0/0x474 [ipv6]
    [<800825ec>] call_timer_fn.isra.4+0x24/0x84
    [<80082888>] run_timer_softirq+0x23c/0x2b4
    [<8002a01c>] __do_softirq+0x1d4/0x318
    [<8002a440>] irq_exit+0x78/0x84
    [<80003bc8>] plat_irq_dispatch+0x108/0x160
    [<80008228>] ret_from_irq+0x0/0x4
    
    
    Code: 004c1021  004c182b  00431021 <8c880060> 8c890064  8c8b0068  8c8c006c  00481021  0048182b
    ---[ end trace d2d2f381e4657e16 ]---
    Kernel panic - not syncing: Fatal exception in interrupt
    Rebooting in 180 seconds..

    Habe dann mein Backup per Stick geflasht, Box ohne omb Stick gestartet, nach beendeten Boxstart omb Stick wieder angesteckt und dann per FTP die .selected- Datei aus den openMultiboot Ordner gelöscht.
    Box startet dann nach Boxneustart auch wieder mit dem omb Stick.

    Habe nun mal ein omb HDMU Image gestartet, hier startet dieses ohne Probleme.
    Dann wieder das omb opena.tv 5.2 ausgewählt und prommt spinnt wieder alles und ich mußte wieder Backup einspielen, habe das nun 3 mal probiert, immer das selbe.

    MfG
    Geändert von Anskar (23.03.2016 um 15:04 Uhr)

    •   Alt Advertising

       

  2. #22
    Senior Mitglied
    Registriert seit
    05.04.2013
    Beiträge
    564
    Thanks (gegeben)
    6
    Thanks (bekommen)
    53
    Total Downloaded
    118,32 MB
    Total Downloaded
    118,32 MB
    ReceiverDanke
    Kann man auch beim Open-multiboot, image von anderen Boxen installieren ?

  3. #23
    Senior Mitglied
    Registriert seit
    28.04.2014
    Beiträge
    371
    Thanks (gegeben)
    159
    Thanks (bekommen)
    50
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Box 1:
    GB UE 4K, Toshiba HDD 3TB intern) openATV 6.3
     
     
    Box 2:
    GB Quad Plus (4 x DVB-S2 , Seagate M9T 2TB intern) openATV 6.3
     
     
    Zitat Zitat von hhh Beitrag anzeigen
    Kann man auch beim Open-multiboot, image von anderen Boxen installieren ?
    Du kannst images von anderen Teams für Deine Box installieren aber keine Images welche nicht für Deine HW gedacht sind......wobei installieren könntest Du die eventuell schon als OMC image aber sie werden bestimmt nicht laufen

    Zitat Zitat von Mikam_0815 Beitrag anzeigen
    Hat jemand eine Idee wie man beim Start der Box dafür sorgen kann dass OpenMultiboot mit einer kleinen Verzögerung gestartet wird? Möchte gerne mal sehen ob das dann genug Zeit lässt, dass zuerst alle drives gemounted werden können bevor OMB nach den Partitionen sucht. Im Moment ist das eine Glückssache und eigentlich nur nach einem powercycle möglich. Selbst wenn as den Start der Box um 2-3 Sekunden verzögert, eventuell wäre dann das OMB Problem "gegessen"
    Zitiere mich nochmals selbst: Immer noch niemand eine Idee? ich suche mir schon einen Wolf aber habe auch noch nichts gefunden
    Eine Änderung der Reihenfolge in der fstab wird wohl nix bringen, werde es aber bei Gelegenheit mal probieren. Aus irgendeinem Grund mounted er immer zuerst die HDD und die ist auch immer parat wenn OMB nach images sucht.....und in der fstab kommt die auch vor dem USB Stick.......wäre aber schön wenn OMC warten würde bis alle devices gemounted sind, von mir aus kann die Box dann auch 5 Sekunden langsamer starten.

  4. Thanks Anskar bedankten sich
  5. #24

    Registriert seit
    19.09.2014
    Ort
    Thüringer
    Beiträge
    3.409
    Thanks (gegeben)
    3434
    Thanks (bekommen)
    990
    Total Downloaded
    229,02 MB
    Total Downloaded
    229,02 MB
    ReceiverDanke
    Box 1:
    3 mal Mut@nt HD 51 UHD
     
     
    Box 2:
    GB HD Quad Plus
     
     
    Box 3:
    Octagon SF8008
     
     
    Box 4:
    Octagon SF8008 SUPREME
     
     
    @Mikam0815, das es diverse Probleme gibt hab ich ja bestätigt.
    Nur leider stecke ich in der Materie nicht so tief drin das ich Dir da helfen könnte.
    Mir fehlt da leider das nötige Wissen :-(
    Entwickelt hatte doch damals das omb direkt Gigablue.
    Hier gibt es ja Spezies , wie z.B. arn354, vielleicht sollten wir Ihn mal direkt darauf ansprechen.

    MfG
    Geändert von Anskar (25.03.2016 um 21:02 Uhr)

  6. #25
    Senior Mitglied
    Registriert seit
    28.04.2014
    Beiträge
    371
    Thanks (gegeben)
    159
    Thanks (bekommen)
    50
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Box 1:
    GB UE 4K, Toshiba HDD 3TB intern) openATV 6.3
     
     
    Box 2:
    GB Quad Plus (4 x DVB-S2 , Seagate M9T 2TB intern) openATV 6.3
     
     
    Habe jetzt das OATV 5.3 im flash und hier funktioniert atuell das OMB Menü bei jedem reboot, egal ob power cycle oder via init 6. Sehe im Log dass OMC direkt nach dem mounten von /dev/sdb nach OMB images sucht.

    Code:
    sd 3:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
    
     sdb: sdb1 sdb2
    
    sd 3:0:0:0: [sdb] Attached SCSI removable disk
    
    open-multiboot - debug: check device /dev/sdb2
    
    EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    
    open-multiboot - debug: found data on device /dev/sdb2
    Bin nicht sicher ob das jetzt eher "Zufall" ist und sich das timing Problem später wieder einstellen kann oder ob was angepasst wurde, habe bisher keine Rückmeldung erhalten.

    Hier der Ausschnit aus dem serial log:

    Code:
    ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    
    ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133
    
    ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    
    ata1.00: configured for UDMA/133
    
    scsi 0:0:0:0: Direct-Access     ATA      ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5
    
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    
    sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    
    sd 0:0:0:0: [sda] 4096-byte physical blocks
    
    sd 0:0:0:0: [sda] Write Protect is off
    
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    
    No PHY detected, not registering interface:1
    
    bcmgenet: probe of bcmgenet.1 failed with error -5
    
    usbcore: registered new interface driver zd1201
    
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    
    ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
    
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    
    hub 1-0:1.0: USB hub found
    
    hub 1-0:1.0: 1 port detected
    
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    
    ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
    
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    
     sda: sda1
    
    sd 0:0:0:0: [sda] Attached SCSI disk
    
    hub 2-0:1.0: USB hub found
    
    hub 2-0:1.0: 1 port detected
    
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    
    ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
    
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    
    hub 3-0:1.0: USB hub found
    
    hub 3-0:1.0: 1 port detected
    
    ata2: SATA link down (SStatus 0 SControl 300)
    
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    
    ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
    
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    
    hub 4-0:1.0: USB hub found
    
    hub 4-0:1.0: 1 port detected
    
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    
    ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
    
    hub 5-0:1.0: USB hub found
    
    hub 5-0:1.0: 1 port detected
    
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    
    ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
    
    hub 6-0:1.0: USB hub found
    
    hub 6-0:1.0: 1 port detected
    
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    
    ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    
    hub 7-0:1.0: USB hub found
    
    hub 7-0:1.0: 1 port detected
    
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    
    ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    
    hub 8-0:1.0: USB hub found
    
    hub 8-0:1.0: 1 port detected
    
    usbcore: registered new interface driver usb-storage
    
    mousedev: PS/2 mouse device common for all mice
    
    i2c /dev entries driver
    
    usbcore: registered new interface driver btusb
    
    hidraw: raw HID events driver (C) Jiri Kosina
    
    usbcore: registered new interface driver usbhid
    
    usbhid: USB HID core driver
    
    TCP: cubic registered
    
    NET: Registered protocol family 17
    
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    
    Bluetooth: HIDP socket layer initialized
    
    Key type dns_resolver registered
    
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    
    EBI CS0: setting up NAND flash (primary)
    
    nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
    
    nand: AMD/Spansion S34ML04G1
    
    nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    
    nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
    
    nand: AMD/Spansion S34ML04G1
    
    nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    
    Bad block table found at page 262080, version 0x01
    
    Bad block table found at page 262016, version 0x01
    
    Creating 4 MTD partitions on "brcmnand.0":
    
    0x000000e00000-0x00001f000000 : "rootfs"
    
    0x000000e00000-0x00001f000000 : "rootfs(redundant)"
    
    0x000000200000-0x000000900000 : "kernel"
    
    0x000000900000-0x000000a00000 : "mac"
    
    ubi0: default fastmap pool size: 190
    
    ubi0: default fastmap WL pool size: 25
    
    ubi0: attaching mtd0
    
    ubi0: attached by fastmap
    
    ubi0: fastmap pool size: 190
    
    ubi0: fastmap WL pool size: 25
    
    ubi0: attached mtd0 (name "rootfs", size 482 MiB)
    
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    
    ubi0: good PEBs: 3856, bad PEBs: 0, corrupted PEBs: 0
    
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    
    ubi0: max/mean erase counter: 14/7, WL threshold: 4096, image sequence number: 1666827422
    
    ubi0: available PEBs: 0, total reserved PEBs: 3856, PEBs reserved for bad PEB handling: 80
    
    ALSA device list:
    
    ubi0: background thread "ubi_bgt0d" started, PID 62
    
      No soundcards found.
    
    UBIFS: background thread "ubifs_bgt0_0" started, PID 63
    
    random: nonblocking pool is initialized
    
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    
    UBIFS: FS size: 477302784 bytes (455 MiB, 3759 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    
    UBIFS: reserved for root: 0 bytes (0 KiB)
    
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID DAAD77F4-4C66-458A-9413-31B3FD2B619B, small LPT model
    
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    
    devtmpfs: mounted
    
    Freeing unused kernel memory: 236K (808e5000 - 80920000)
    
    open-multiboot - debug: mount /proc
    
    open-multiboot - debug: mount /sys
    
    open-multiboot - debug: mount /media
    
    open-multiboot - debug: run volatile media
    
    open-multiboot - debug: run mdev
    
    mkdir: can't create directory '/tmp': No such file or directory
    
    mkdir: can't create directory '/tmp': No such file or directory
    
    EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: errors=remount-ro,data=writeback
    
    usb 2-1: new high-speed USB device number 2 using ehci-brcm
    
    usb-storage 2-1:1.0: USB Mass Storage device detected
    
    scsi host3: usb-storage 2-1:1.0
    
    scsi 3:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 6
    
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    
    sd 3:0:0:0: [sdb] 60620800 512-byte logical blocks: (31.0 GB/28.9 GiB)
    
    sd 3:0:0:0: [sdb] Write Protect is off
    
    sd 3:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
    
     sdb: sdb1 sdb2
    
    sd 3:0:0:0: [sdb] Attached SCSI removable disk
    
    open-multiboot - debug: check device /dev/sdb2
    
    EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    
    open-multiboot - debug: found data on device /dev/sdb2
    
    open-multiboot - debug: discover images
    
    Traceback (most recent call last):
    
      File "/sbin/open-multiboot-branding-helper.py", line 61, in <module>
    
        import boxbranding
    
    ImportError: No module named boxbranding
    
    Traceback (most recent call last):
    
      File "/sbin/open-multiboot-branding-helper.py", line 61, in <module>
    
        import boxbranding
    
    ImportError: No module named boxbranding
    
    open-multiboot - debug: prepare destination
    
    open-multiboot - debug: load modules
    
    Loading modules: dvb version: 20160301153836-14.4
    
    LCD: ILI9327
    
    input: gigablue remote control as /devices/virtual/input/input0

  7. #26

    Registriert seit
    19.09.2014
    Ort
    Thüringer
    Beiträge
    3.409
    Thanks (gegeben)
    3434
    Thanks (bekommen)
    990
    Total Downloaded
    229,02 MB
    Total Downloaded
    229,02 MB
    ReceiverDanke
    Box 1:
    3 mal Mut@nt HD 51 UHD
     
     
    Box 2:
    GB HD Quad Plus
     
     
    Box 3:
    Octagon SF8008
     
     
    Box 4:
    Octagon SF8008 SUPREME
     
     
    Ja ist schon schade das sich keiner von den Spezialisten hier mal zu Wort meldet.
    Ich hab noch opena.tv 5.1 im Flash.

    MfG

  8. #27
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Das Problem ist wohl das wir alle kein OMB mehr verwenden. Ich hatte das einmal zum testen auf einer Box

  9. #28

    Registriert seit
    19.09.2014
    Ort
    Thüringer
    Beiträge
    3.409
    Thanks (gegeben)
    3434
    Thanks (bekommen)
    990
    Total Downloaded
    229,02 MB
    Total Downloaded
    229,02 MB
    ReceiverDanke
    Box 1:
    3 mal Mut@nt HD 51 UHD
     
     
    Box 2:
    GB HD Quad Plus
     
     
    Box 3:
    Octagon SF8008
     
     
    Box 4:
    Octagon SF8008 SUPREME
     
     
    Hatte da auch eher auf arn354 gehofft, da er ja eng mit GigaBlue verknüpft ist und das OMB ja da her kommt.

    MfG
    Geändert von Anskar (02.04.2016 um 09:41 Uhr)

  10. #29
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Ich frag ihm mal ob er sich das ansieht wenn er online ist.

  11. Thanks Anskar, Mikam_0815 bedankten sich
  12. #30
    +++ ATV Chef Tester +++ Avatar von HD75hd
    Registriert seit
    29.08.2014
    Beiträge
    5.344
    Thanks (gegeben)
    2010
    Thanks (bekommen)
    2281
    Total Downloaded
    51,35 MB
    Total Downloaded
    51,35 MB
    ReceiverDanke
    Box 1:
    OSmio+4K @ 7.3
     
     
    Box 2:
    OSmio4K @ 7.3
     
     
    Box 3:
    OSmini4K @ 7.3
     
     
    Box 4:
    SF8008 @ 7.3
     
     
    Ich verwende OMB ohne Probleme mit einer eingebauten SSD mit der Quad+
    Gruss HD75hd

    OS mio+ 4K / OpenATV 7.3
    Unicable DurLine UK 124

    Wer kein Fullbackup hat, hat selber Schuld




Seite 3 von 5 ErsteErste 12345 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 14:22 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com