Ergebnis 11 bis 20 von 22
Thema: Hdmi-cec
-
24.07.2021, 17:24 #11
- Registriert seit
- 26.01.2014
- Beiträge
- 59
- Thanks (gegeben)
- 11
- Thanks (bekommen)
- 19
- Total Downloaded
- 14,76 MB
- Total Downloaded
- 14,76 MB
I think you mean the options for handle wake-up from tv"" ?
To my understanding that;'s only for switching on / waking up the stb when you power on the tv, and this is already working.
Non the less, I tried every possible setting, it doesn't matter. I also played with the "minimum send interval" settings. That helped with the earlier ATV versions.
Geändert von gjstroom (24.07.2021 um 17:41 Uhr)
-
Advertising
-
24.07.2021, 17:34 #12
- Registriert seit
- 20.04.2013
- Beiträge
- 24.948
- Thanks (gegeben)
- 4700
- Thanks (bekommen)
- 9133
- Total Downloaded
- 596,61 MB
- Total Downloaded
- 596,61 MB
Box 1:GB Q4K-SC / UE4K-SC / UE4K-CBox 2:GigaBlue Q-SSC / Q+-SSCBox 3:DM900uhd-SS / Vu+DuoBox 4:ZGemma H7/H9 SF8008Box 5:diverse andere . . .So enable Debugmode, and look for the events.
May be, this helps a little?
Bedeutung / Erklärung der Funktionen bei HDMI-CECGrüßle
Ralf
---------------------------------------------
Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
Astra 19.2E UniCable & KabelBW, oATV/teamBlue
(u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----
-
Danke - 1 ThanksMr.Servo bedankten sich
-
24.07.2021, 18:57 #13
- Registriert seit
- 26.01.2014
- Beiträge
- 59
- Thanks (gegeben)
- 11
- Thanks (bekommen)
- 19
- Total Downloaded
- 14,76 MB
- Total Downloaded
- 14,76 MB
I made a debug-log:
Code:Switch tv on 19:40:38.9822 <Rx:> 00 32 00 00 00 <TV><Set Menu Language><> 19:40:39.2757 <Rx:> 00 DD <TV><Polling Message> 19:40:41.7504 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0> 19:40:41.7528 [ ] routing has changed... from '0.0.0.0' to '0.0.0.0' (to our address: False) 19:40:41.9642 <Rx:> 01 87 00 00 00 <Recording 1><Device Vendor ID><0> 19:40:42.1900 <Rx:> 01 84 00 00 00 <Recording 1><Report Physical Address><0.0.0.0><TV> 19:40:43.1278 <Rx:> 00 8C <TV><Give Device Vendor ID> 19:40:43.3808 <Tx:> 00 87 00 00 00 <TV><Device Vendor ID><0> 19:40:44.6330 <Rx:> 00 83 <TV><Give Physical Address> 19:40:44.8861 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 19:40:45.1011 <Rx:> 00 46 <TV><Give OSD Name> 19:40:45.1047 [ ] wake up... 19:40:45.4780 <Tx:> 00 47 76 75 73 6F 6C 6F 73 65 <TV><Set OSD Name><vusolose> 19:40:45.9240 <Tx:> 00 04 <TV><Image View On> 19:40:45.9275 <Rx:> 00 A0 00 00 00 00 <TV><Vendor Command With ID><0><Vendor Specific Data> 19:40:46.1781 <Tx:> 0F 82 10 00 <Broadcast><Active Source><1.0.0.0> 19:40:46.4312 <Tx:> 00 8E 00 <TV><Menu Status><Activated> 19:40:47.3208 <Rx:> 00 9F <TV><Get CEC Version> 19:40:48.8326 <Rx:> 00 85 <TV><Request Active Source> 19:40:49.0859 <Tx:> 0F 82 10 00 <Broadcast><Active Source><1.0.0.0> Switch to hdmi2 (other cec device) 19:44:44.9608 <Rx:> 01 84 00 00 00 <Recording 1><Report Physical Address><0.0.0.0><TV> 19:44:45.1176 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:44:45.3259 <Rx:> 01 82 00 00 <Recording 1><Active Source><0.0.0.0> Switch back to SOLOSE automatically 19:46:12.9018 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0> 19:46:12.9045 [ ] routing has changed... from '0.0.0.0' to '0.0.0.0' (to our address: False) 19:46:13.1550 <Rx:> 01 82 00 00 <Recording 1><Active Source><0.0.0.0> 19:46:13.5130 <Rx:> 01 87 00 00 00 <Recording 1><Device Vendor ID><0> 19:46:13.8534 <Rx:> 01 84 00 00 00 <Recording 1><Report Physical Address><0.0.0.0><TV> 19:46:14.7998 <Rx:> 00 8C <TV><Give Device Vendor ID> 19:46:15.0534 <Tx:> 00 87 00 00 00 <TV><Device Vendor ID><0> 19:46:16.3005 <Rx:> 00 83 <TV><Give Physical Address> 19:46:16.5550 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 19:46:16.7694 <Rx:> 00 46 <TV><Give OSD Name> 19:46:16.8081 <Tx:> 00 47 76 75 73 6F 6C 6F 73 65 <TV><Set OSD Name><vusolose> 19:46:17.2511 <Rx:> 00 A0 00 00 00 00 <TV><Vendor Command With ID><0><Vendor Specific Data> 19:46:18.6550 <Rx:> 00 9F <TV><Get CEC Version> 19:46:20.1709 <Rx:> 00 85 <TV><Request Active Source> 19:46:20.2887 <Rx:> 01 82 00 00 <Recording 1><Active Source><0.0.0.0> 19:46:20.4247 <Tx:> 0F 82 10 00 <Broadcast><Active Source><1.0.0.0> Switch to tv internal tuner 19:48:49.9332 <Rx:> 00 82 00 00 <TV><Active Source><0.0.0.0> 19:48:50.2102 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0> 19:48:50.2129 [ ] routing has changed... from '0.0.0.0' to '0.0.0.0' (to our address: False) Switch to SOLOSEV2 19:50:25.2642 <Rx:> 00 8F <TV><Give Device Power Status> 19:50:25.5174 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:50:25.6807 <Rx:> 00 83 <TV><Give Physical Address> 19:50:25.7708 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 19:50:26.0362 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:50:27.9862 <Rx:> 00 8F <TV><Give Device Power Status> 19:50:28.2393 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:50:28.4550 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:50:30.4091 <Rx:> 00 8F <TV><Give Device Power Status> 19:50:30.6622 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:50:30.8772 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:50:32.8282 <Rx:> 00 8F <TV><Give Device Power Status> 19:50:33.0816 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:50:33.2945 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:50:35.2656 <Rx:> 00 8F <TV><Give Device Power Status> 19:50:35.5190 <Tx:> 00 90 00 <TV><Report Power Status><On> Switch failed 19:51:14.7698 <Rx:> 00 16 <TV><Polling Message> 19:51:17.1875 <Rx:> 01 87 00 00 00 <Recording 1><Device Vendor ID><0> 19:51:17.4178 <Rx:> 01 84 00 00 00 <Recording 1><Report Physical Address><0.0.0.0><TV> 19:51:18.3585 <Rx:> 00 8C <TV><Give Device Vendor ID> 19:51:18.6117 <Tx:> 00 87 00 00 00 <TV><Device Vendor ID><0> 19:51:19.8666 <Rx:> 00 83 <TV><Give Physical Address> 19:51:20.1202 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 19:51:20.3388 <Rx:> 00 46 <TV><Give OSD Name> 19:51:20.3742 <Tx:> 00 47 76 75 73 6F 6C 6F 73 65 <TV><Set OSD Name><vusolose> 19:51:20.8257 <Rx:> 00 A0 00 00 00 00 <TV><Vendor Command With ID><0><Vendor Specific Data> 19:51:22.2281 <Rx:> 00 9F <TV><Get CEC Version> 19:51:23.7987 <Rx:> 00 82 00 00 <TV><Active Source><0.0.0.0> 19:51:45.2626 <Rx:> 00 8F <TV><Give Device Power Status> 19:51:45.5159 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:51:45.6791 <Rx:> 00 83 <TV><Give Physical Address> 19:51:45.7690 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 19:51:46.0333 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:51:47.9906 <Rx:> 00 8F <TV><Give Device Power Status> 19:51:48.2438 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:51:48.4758 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:51:50.4258 <Rx:> 00 8F <TV><Give Device Power Status> 19:51:50.6788 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:51:50.8914 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:51:52.8414 <Rx:> 00 8F <TV><Give Device Power Status> 19:51:53.0945 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:51:53.3087 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 19:51:55.2591 <Rx:> 00 8F <TV><Give Device Power Status> 19:51:55.5126 <Tx:> 00 90 00 <TV><Report Power Status><On> 19:52:02.4128 <Rx:> 00 DD <TV><Polling Message> 19:52:04.8462 <Rx:> 01 87 00 00 00 <Recording 1><Device Vendor ID><0> 19:52:05.0766 <Rx:> 01 84 00 00 00 <Recording 1><Report Physical Address><0.0.0.0><TV> 19:52:06.0016 <Rx:> 00 8C <TV><Give Device Vendor ID> 19:52:06.2564 <Tx:> 00 87 00 00 00 <TV><Device Vendor ID><0> 19:52:07.5064 <Rx:> 00 83 <TV><Give Physical Address> 19:52:07.7596 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 19:52:07.9791 <Rx:> 00 46 <TV><Give OSD Name> 19:52:08.0129 <Tx:> 00 47 76 75 73 6F 6C 6F 73 65 <TV><Set OSD Name><vusolose> 19:52:08.4608 <Rx:> 00 A0 00 00 00 00 <TV><Vendor Command With ID><0><Vendor Specific Data> 19:52:09.8685 <Rx:> 00 9F <TV><Get CEC Version> 19:52:11.4427 <Rx:> 00 82 00 00 <TV><Active Source><0.0.0.0>
When I switch to the internal tuner and try to switch back to my VUSOLOSEV2, the tv can't connect to the stb. Then tried a refresh of the hdmi devices on the tv, no result.
-
24.07.2021, 19:17 #14
- Registriert seit
- 26.01.2014
- Beiträge
- 59
- Thanks (gegeben)
- 11
- Thanks (bekommen)
- 19
- Total Downloaded
- 14,76 MB
- Total Downloaded
- 14,76 MB
Made another log, here I switch on the tv, the box powers on, tv set to hdmi1 and cec working. Then switch to the internal tv tuner, then back to the SOLOSE device (fail) then to hdmi1, do a hdmi-cec refresh on the tv and cec is working again for my SOLOSEV2.
Code:turn on tv 20:09:36.5225 <Rx:> 00 32 00 00 00 <TV><Set Menu Language><> 20:09:36.9662 <Rx:> 00 C4 <TV><Polling Message> 20:09:39.4526 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0> 20:09:39.4551 [ ] routing has changed... from '0.0.0.0' to '0.0.0.0' (to our address: False) 20:09:39.5242 <Rx:> 00 8C <TV><Give Device Vendor ID> 20:09:39.7774 <Tx:> 00 87 00 00 00 <TV><Device Vendor ID><0> 20:09:40.8527 <Rx:> 00 83 <TV><Give Physical Address> 20:09:41.1059 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 20:09:41.3286 <Rx:> 00 46 <TV><Give OSD Name> 20:09:41.3316 [ ] wake up... 20:09:41.7012 <Tx:> 00 47 76 75 73 6F 6C 6F 73 65 <TV><Set OSD Name><vusolose> 20:09:42.1451 <Tx:> 00 04 <TV><Image View On> 20:09:42.1489 <Rx:> 00 A0 00 00 00 00 <TV><Vendor Command With ID><0><Vendor Specific Data> 20:09:42.3981 <Tx:> 0F 82 10 00 <Broadcast><Active Source><1.0.0.0> 20:09:42.6514 <Tx:> 00 8E 00 <TV><Menu Status><Activated> 20:09:43.5402 <Rx:> 00 9F <TV><Get CEC Version> 20:09:45.0699 <Rx:> 00 85 <TV><Request Active Source> 20:09:45.3234 <Tx:> 0F 82 10 00 <Broadcast><Active Source><1.0.0.0> Switch to interlnal tv tuner 20:10:41.5337 <Rx:> 00 82 00 00 <TV><Active Source><0.0.0.0> 20:10:41.8773 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0> 20:10:41.8805 [ ] routing has changed... from '0.0.0.0' to '0.0.0.0' (to our address: False) Switch to SOLOSE 20:11:21.9445 <Rx:> 00 8F <TV><Give Device Power Status> 20:11:22.1981 <Tx:> 00 90 00 <TV><Report Power Status><On> 20:11:22.3614 <Rx:> 00 83 <TV><Give Physical Address> 20:11:22.4512 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 20:11:22.7152 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 20:11:24.6646 <Rx:> 00 8F <TV><Give Device Power Status> 20:11:24.9184 <Tx:> 00 90 00 <TV><Report Power Status><On> 20:11:25.1314 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 20:11:27.0821 <Rx:> 00 8F <TV><Give Device Power Status> 20:11:27.3354 <Tx:> 00 90 00 <TV><Report Power Status><On> 20:11:27.5485 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 20:11:29.4981 <Rx:> 00 8F <TV><Give Device Power Status> 20:11:29.7517 <Tx:> 00 90 00 <TV><Report Power Status><On> 20:11:29.9647 <Rx:> 00 86 00 00 <TV><Set Stream Path><0.0.0.0> 20:11:31.9171 <Rx:> 00 8F <TV><Give Device Power Status> 20:11:32.1701 <Tx:> 00 90 00 <TV><Report Power Status><On> Switch to hdmi1 20:12:17.1461 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0> 20:12:17.1489 [ ] routing has changed... from '0.0.0.0' to '0.0.0.0' (to our address: False) Refresh hdmi devices on tv 20:12:59.5898 <Rx:> 00 99 <TV><Clear Digital Timer><unknown (not implemented yet)> 20:13:01.8769 <Rx:> 00 8C <TV><Give Device Vendor ID> 20:13:02.1303 <Tx:> 00 87 00 00 00 <TV><Device Vendor ID><0> 20:13:03.3856 <Rx:> 00 83 <TV><Give Physical Address> 20:13:03.6389 <Tx:> 0F 84 10 00 03 <Broadcast><Report Physical Address><1.0.0.0><Tuner> 20:13:03.8611 <Rx:> 00 46 <TV><Give OSD Name> 20:13:03.8919 <Tx:> 00 47 76 75 73 6F 6C 6F 73 65 <TV><Set OSD Name><vusolose> 20:13:04.3425 <Rx:> 00 A0 00 00 00 00 <TV><Vendor Command With ID><0><Vendor Specific Data> 20:13:05.7470 <Rx:> 00 9F <TV><Get CEC Version> 20:13:07.2745 <Rx:> 00 85 <TV><Request Active Source> 20:13:07.5278 <Tx:> 0F 82 10 00 <Broadcast><Active Source><1.0.0.0> 20:13:14.8352 <Rx:> 00 44 00 <TV><User Control Pressed><Select> 20:13:14.9882 <Rx:> 00 45 <TV><User Control Released> 20:13:16.2741 <Rx:> 00 44 00 <TV><User Control Pressed><Select> 20:13:16.4792 <Rx:> 00 45 <TV><User Control Released> 20:13:16.5765 <Rx:> 00 44 00 <TV><User Control Pressed><Select> 20:13:16.7611 <Rx:> 00 45 <TV><User Control Released> hdmi-cec now working on hdmi1 (VUSOLOSEV2)
Geändert von gjstroom (24.07.2021 um 20:47 Uhr)
-
24.07.2021, 20:44 #15
- Registriert seit
- 26.01.2014
- Beiträge
- 59
- Thanks (gegeben)
- 11
- Thanks (bekommen)
- 19
- Total Downloaded
- 14,76 MB
- Total Downloaded
- 14,76 MB
Test, I get a blank screen when opening https://www.opena.tv/openatv-7-0-py3...dmi-cec-2.html
Weird now it works again...
-
26.07.2021, 07:59 #16
- Registriert seit
- 10.08.2020
- Ort
- Pfalz / Palatinate
- Beiträge
- 2.656
- Thanks (gegeben)
- 1811
- Thanks (bekommen)
- 2434
- Total Downloaded
- 56,91 MB
- Total Downloaded
- 56,91 MB
Box 1:GigaBlue UHD UE 4k Cable (openATV 7.4)Box 2:Mut@nt HD51 4k Cable (oATV DEVEL)Moin Zusammen / Good morning together!
Es ist erkannt worden, daß die Volumetasten nicht immer weitergeleitet sondern teilweise verschluckt werden. An dem Problem wird gerade gearbeitet! Wir müssen einfach abwarten...
It has been recognized that the volume keys are not always passed on but are sometimes swallowed up. The problem is currently being worked on! We have to simply wait...
Gruß / Regards......Mr.Servo
-
Danke - 4 Thanks
-
26.07.2021, 11:39 #17
- Registriert seit
- 08.06.2014
- Beiträge
- 2.601
- Thanks (gegeben)
- 778
- Thanks (bekommen)
- 1500
- Total Downloaded
- 22,11 MB
- Total Downloaded
- 22,11 MB
Das Problem ist, es werden keine Daten empfangen. Zumindest fehlen diese im CEC-log im Gegensatz zum E2-log.
Code:20:10:41.5337 <Rx:> 00 82 00 00 <TV><Active Source><0.0.0.0> 20:10:41.8773 <Rx:> 00 80 00 00 00 00 <TV><Routing Change><0.0.0.0><0.0.0.0>
-
Danke - 1 ThanksPike_Bishop bedankten sich
-
27.07.2021, 18:35 #18
- Registriert seit
- 19.07.2017
- Beiträge
- 22
- Thanks (gegeben)
- 4
- Thanks (bekommen)
- 0
- Total Downloaded
- 0
- Total Downloaded
- 0
Kann man unter 7.0 hdmi-cec eingaben der tv fernbedienung nutzen wenn kodi oder hbbtv plugins gestartet werden?
unter 6.4 muss man dann immer auf die receiver fernbedienung zurückgrefen. blöd wenn der receiver hinter dem fernseher versteckt ist
-
27.07.2021, 21:11 #19
- Registriert seit
- 12.10.2014
- Ort
- Wanderup
- Beiträge
- 185
- Thanks (gegeben)
- 97
- Thanks (bekommen)
- 15
- Total Downloaded
- 30,94 MB
- Total Downloaded
- 30,94 MB
ThemenstarterBox 1:GigaBlue Quad+ 4K mit OpenHDF 6.5 im WZBox 2:VU+ Uno 4K SE mit OpenATV 7.3 im SZGeht leider auf der VU auch mit dem neuesten 7.0 nicht.
VU+ Uno 4K SE mit OpenATV 7.3 (SZ, Satempfang)
Gigablue Quad 4K mit OpenHDF 6.5 (WZ, Satempfang)
-
28.07.2021, 12:17 #20
- Registriert seit
- 12.10.2014
- Ort
- Wanderup
- Beiträge
- 185
- Thanks (gegeben)
- 97
- Thanks (bekommen)
- 15
- Total Downloaded
- 30,94 MB
- Total Downloaded
- 30,94 MB
ThemenstarterBox 1:GigaBlue Quad+ 4K mit OpenHDF 6.5 im WZBox 2:VU+ Uno 4K SE mit OpenATV 7.3 im SZFunktioniert auch mit Version vom 28. nicht.
Nachtrag: Auch mit Image vom 1.8. kein Erfolg.
Image vom 5.8.: Nein.Geändert von kayman (05.08.2021 um 21:13 Uhr)
VU+ Uno 4K SE mit OpenATV 7.3 (SZ, Satempfang)
Gigablue Quad 4K mit OpenHDF 6.5 (WZ, Satempfang)
Lesezeichen