Ergebnis 21 bis 30 von 70
Thema: VU+ ZERO 4K openatv 6.5 test
-
03.08.2020, 21:19 #21
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
@neoatomic wegen skin fehler irgend welche Besonderheiten eingestellt in e2 oder im skin damit ich das nachstellen kann
openATV we are open Source
Boykott GPL violator
-
Danke - 1 Thanksneoatomic bedankten sich
-
Advertising
-
04.08.2020, 00:36 #22
- Registriert seit
- 18.04.2016
- Beiträge
- 168
- Total Downloaded
- 408,28 MB
- Total Downloaded
- 408,28 MB
Box 1:VU+ Ultimo4K (dvb-s/c/t2)Box 2:VU+ Solo4K (dvb-s/c/t2)Box 3:WaveFrontier T90 mit 16 lnbsNo, i use a pretty straight forward setup, and noting to fancy on the skin side.
If i had to speculate, the error points to the posisioner section, so it could be relaited to my tuner/LNB setup.
I have 3 tuners inside the Ultimo4k, DVB-c/s2/t2. On the S2 tuner i have on port 1 16 LNBs on DiSEqC 1.1, and on port 2 4 LNB's on DiSEqC 1.0.
Maybe the converter its hitting a wall because of the number of 16LNBs?
On my previous testing a full factory reset did fix the missing info's on the infobar in MyMatrix. And off-course with a factory reset the LNB setup also gets reset to a singe LNB.
I'm pretty sure that @ciefp also uses multiple LNB's (but with a rotor) so that could explain why we both have the same issue with the missing info's on the infobar when restoring the settings from 6.4 - > 6.5.
Also i use my OE_LCD_1 skin from the feed, but doubt that's it. So for testing purposes setup a STB with multiple LNBs?
Off-course this is all pure speculation at this point.
Sadly i don't have much time the coming day's, but will test as soon as i can.
-
04.08.2020, 05:45 #23
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
for tuner setup issue here the first fix
copy to /usr/lib/enigma2/python/Components
openATV we are open Source
Boykott GPL violator
-
Danke - 2 Thanks
-
04.08.2020, 10:41 #24
- Registriert seit
- 18.04.2016
- Beiträge
- 168
- Total Downloaded
- 408,28 MB
- Total Downloaded
- 408,28 MB
Box 1:VU+ Ultimo4K (dvb-s/c/t2)Box 2:VU+ Solo4K (dvb-s/c/t2)Box 3:WaveFrontier T90 mit 16 lnbsI replaced the TunerInfo.py. But the issue with the missing info in MatrixHD wasn't fixed.
But i have narrowed down the issue with the missing info's on the infobar. Its related to the channel-list.
I manually removed all my channel-list files from the enimga2 folder (list is based on @ciefp motor list with my own modifications) and replaced it with DX-Andy's Astra FTA list. After a reboot the missing info's work on the infobar.
So next i try'd ciefp 1 sat Astra only list and that also works.
Next the ciefp 10 sat list and that also works.
Next the ciefp 13 sat list and that also works. (42E-39E-28E-23E-19E-16E-13E-9E-7E-4.8E-1.9E-0.8W-5W)
Next the ciefp motor list and that DOESNT work. (75E-34W)
So now you should be able to replicate the issue if you load ciefps motor settings list.
My modified motor list has 17 Sat's 12w-33e, so that is the most i can narrow it down at this moment.
Hopefully ciefp can confirm that replacing the channel list helps for him also.
Also when i have replaced the channelist the basic enigma2 skins works without BS & bootloop.
So that problem is definitely related to this missing info/channelist issue.
Edit : link to the lists : Latest Ciefp Settings E2 - Page 29 - DM 800 - DM 8000 Settings
EDIT2: A small request, i have currently set my log location for files to /media/hdd.
But the Twisted logs are (hard coded) to /tmp/ Could that be changed so that it also uses/honers the folder set for all log-files?
enigma2/mytest.py at b962a0dec4ee005ee10af597925be7efc94c1244 * openatv/enigma2 * GitHub
Code:[Avahi] avahi_timeout_update [eDVBFrontend] try to close frontend 16 [eDVBFrontend16] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2 [eDVBFrontend] try to close frontend 17 [eDVBFrontend17] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2 [eConsoleAppContainer] Starting /bin/sh [ePyObject] (PyObject_CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xb3310520>>,(0,)) failed) [gRC] main thread is non-idle! display spinner! [gRC] main thread is non-idle! display spinner! [eDVBResourceManager] allocate channel.. 0817:0600 [eDVBFrontend] m_need_delivery_system_workaround = 0 [eDVBFrontend] opening frontend 0 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2 tune tuner 0 frontend 0 tuning dvb-c to 682750 khz, sr 6900000, fec 0, modulation 5, inversion 2 [eDVBChannel] OURSTATE: tuner 0 tuning [eDVBServicePMTHandler] allocate Channel: res 0 [eDVBChannel] getDemux cap=00 [eDVBResourceManager] allocate demux cap=00 [eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 [eDVBDemux] open demux /dev/dvb/adapter0/demux0 [Avahi] watch activated: 0x1 [eHdmiCEC] received message 00 8F [Avahi] timeout elapsed [Avahi] Resolving service 'vusolo4k' of type '_e2stream._tcp' [Avahi] avahi_timeout_new [Avahi] avahi_timeout_free [Avahi] avahi_timeout_update [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [gRC] main thread is non-idle! display spinner! [gRC] main thread is non-idle! display spinner! [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [gRC] main thread is non-idle! display spinner! [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [gRC] main thread is non-idle! display spinner! [ePyObject] (PyObject_CallObject(<bound method Poll.poll of <class 'Components.Converter.PliExtraInfo.PliExtraInfo'>(OrbitalPosition)>,()) failed) [gRC] main thread is non-idle! display spinner! Killed
Geändert von neoatomic (05.08.2020 um 10:35 Uhr)
-
Danke - 1 Thanksciefp bedankten sich
-
04.08.2020, 12:20 #25
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
ok i check this soon
openATV we are open Source
Boykott GPL violator
-
Danke - 2 Thanks
-
04.08.2020, 17:25 #26
- Registriert seit
- 25.08.2014
- Beiträge
- 378
- Thanks (gegeben)
- 51
- Thanks (bekommen)
- 645
- Total Downloaded
- 202,54 MB
- Total Downloaded
- 202,54 MB
ThemenstarterAs neoatomic said when inserting any other settings list that is not motor shows everything on the infobar.
Only the motor setting list does not show icons and signal info on the first infobar.
After replacing the tunerinfo.py file and restarting, there is no more blue screen.
The raedquicksignal plugin on the last version of the openatv image from 20.07 installation went without a hitch.,
Thanks Captain for the supportGeändert von ciefp (04.08.2020 um 18:22 Uhr)
-
Danke - 1 Thanksneoatomic bedankten sich
-
09.08.2020, 15:03 #27
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
openATV we are open Source
Boykott GPL violator
-
Danke - 1 Thanksciefp bedankten sich
-
10.08.2020, 19:29 #28
- Registriert seit
- 25.08.2014
- Beiträge
- 378
- Thanks (gegeben)
- 51
- Thanks (bekommen)
- 645
- Total Downloaded
- 202,54 MB
- Total Downloaded
- 202,54 MB
ThemenstarterMotor settings fixed.
Positioner setup fixed
Subssupport still doesn't work
Thanks Captain, you found a mistake and now it shows everything nicely.
New debug logs
-
10.08.2020, 20:46 #29
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Subssupport still doesn't work
need more info how can test it
i have add english subtitle for a movie and i have see it
you must send me info what is wrong and how can i campare it with 6.4
openATV we are open Source
Boykott GPL violator
-
10.08.2020, 21:13 #30
- Registriert seit
- 25.08.2014
- Beiträge
- 378
- Thanks (gegeben)
- 51
- Thanks (bekommen)
- 645
- Total Downloaded
- 202,54 MB
- Total Downloaded
- 202,54 MB
ThemenstarterOk I will make a debug log tomorrow on both versions 6.5 and 6.4.
I don't know what's wrong when he starts looking for subtitles, he just stands there like in the picture.
Lesezeichen