Seite 1 von 75 1231151 ... LetzteLetzte
Ergebnis 1 bis 10 von 742
  1. #1
    Anfänger
    Registriert seit
    21.01.2015
    Ort
    Fürth
    Beiträge
    9
    Thanks (gegeben)
    39
    Thanks (bekommen)
    0
    Total Downloaded
    603,68 MB
    Total Downloaded
    603,68 MB
    ReceiverDanke
    Box 1:
    Atemio Nemesis
     
     

    Täglich abstürze, meistens nach Aufnahmen!

    Hallo,

    ich nutze openATV 6.4 auf Atemio Nemesis. Bis auf die laufenden Abstürze (ca. 2 Monate) funktioniert alles sehr gut! Ich habe vor einigen Tagen die Festplatte durch eine SSD 256GB ausgetauscht. Das Problem wurde dadurch leider nicht gelöst!
    Die Abstürze kommen meistens nach Aufnahmen oder Einstellungsänderungen im Menü. Es ist dann alles wie eingefroren, auch die Uhrzeit bleibt stehen!
    Ich hoffe jemand kann mir einen Tipp geben wie ich das Problem lösen kann. Ich hänge noch einen crash.log mit an!

    Vielen Dank


    openATV Enigma2 crash log

    Code:
    crashdate=Mi Jan  1 15:07:38 2020
    compiledate=Jan  1 2020
    skin=DarknessFHD/skin.xml
    sourcedate=2019-12-31
    branch=6.4
    rev=2.8.0-21528-g14f1bf6
    component=Enigma2
    
    
    stbmodel=ini-8000am
    stbmodel=duo2
    stbmodel=dm8000
    kernelcmdline=ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=128M@64M bmem=384M@512M memc1=640M
    nimsockets=NIM Socket 0:
    imageversion=box_type=atemionemesis
    imageissue=Welcome to openATV for %h
    
    
    
    
    .cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
    15:06:54.2937 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:54+0100 [-] KEY: 108 0 KEY_DOWN DOWN
    15:06:54.2960 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:54+0100 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'down'.
    15:06:54.5816 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
    15:06:54.5918 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:54+0100 [-] KEY: 108 1 KEY_DOWN DOWN
    15:06:54.6851 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
    15:06:54.6955 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:54+0100 [-] KEY: 108 0 KEY_DOWN DOWN
    15:06:54.6978 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:54+0100 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'down'.
    15:06:54.9836 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
    15:06:54.9939 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:54+0100 [-] KEY: 108 1 KEY_DOWN DOWN
    15:06:55.5461 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
    15:06:55.5562 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:55+0100 [-] KEY: 103 0 KEY_UP UP
    15:06:55.5584 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:55+0100 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'up'.
    15:06:55.8447 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
    15:06:55.8554 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:55+0100 [-] KEY: 103 1 KEY_UP UP
    15:06:56.0902 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
    15:06:56.1006 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] KEY: 352 0 KEY_OK OK
    15:06:56.1027 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [ActionMap] Keymap 'WizardActions' -> Unknown action 'ok'! (Typo in keymap?)
    15:06:56.1055 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
    15:06:56.1812 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] full screen name: Plugins.Extensions.VMC.VMC_Screens_VMCConfig.VMCConfig
    15:06:56.1832 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] plugin name: VMC
    15:06:56.1859 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] Changing nothing - resized: False
    15:06:56.2069 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] Starting factory <HTTPClientFactory: https://raw.githubusercontent.com/sbeatz/enigma2arcticskin/master/vmcupdate>
    15:06:56.2948 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SKIN] Parsing embedded skin <embedded-in-'VMCConfig'>
    15:06:56.2988 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SKIN] processing screen <embedded-in-'VMCConfig'>:
    15:06:56.3756 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SKIN] processing screen VMCBaseSummary:
    15:06:56.3798 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SKIN] Attribute "render" with value "Label" in object of type "eLabel" is not implemented
    15:06:56.3824 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SKIN] Attribute "render" with value "Label" in object of type "eLabel" is not implemented
    15:06:56.3859 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SCREENNAME]  VMCBaseSummary
    15:06:56.3894 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] [SCREENNAME]  VMCConfig
    15:06:56.3917 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
    15:06:56.4019 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:56+0100 [-] KEY: 352 1 KEY_OK OK
    15:06:57.3556 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:06:57+0100 [-] Stopping factory <HTTPClientFactory: https://raw.githubusercontent.com/sbeatz/enigma2arcticskin/master/vmcupdate>
    15:07:00.9369 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
    15:07:00.9478 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:00+0100 [-] KEY: 352 0 KEY_OK OK
    15:07:00.9500 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:00+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'ok'.
    15:07:01.4451 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
    15:07:01.4558 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:01+0100 [-] KEY: 352 1 KEY_OK OK
    15:07:14.9855 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 8b 1
    15:07:14.9968 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:14+0100 [-] KEY: 139 0 KEY_MENU MENU
    15:07:14.9993 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:14+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Unknown action 'menu'! (Typo in keymap?)
    15:07:15.0013 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:15+0100 [-] [ActionMap] Keymap 'SetupActions' -> Unknown action 'menu'! (Typo in keymap?)
    15:07:15.2846 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 8b 1
    15:07:15.2955 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:15+0100 [-] KEY: 139 1 KEY_MENU MENU
    15:07:15.2985 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:15+0100 [-] [SCREENNAME]  UnhandledKey
    15:07:15.8828 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 1
    15:07:15.8940 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:15+0100 [-] KEY: 174 0 KEY_EXIT EXIT
    15:07:15.8971 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:15+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'cancel'.
    15:07:16.1816 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 ae 1
    15:07:16.1918 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:16+0100 [-] KEY: 174 1 KEY_EXIT EXIT
    15:07:17.3725 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
    15:07:17.3828 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:17+0100 [-] KEY: 108 0 KEY_DOWN DOWN
    15:07:17.3850 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:17+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Unknown action 'down'! (Typo in keymap?)
    15:07:17.3868 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:17+0100 [-] [ActionMap] Keymap 'SetupActions' -> Unknown action 'down'! (Typo in keymap?)
    15:07:17.6706 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
    15:07:17.6816 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:17+0100 [-] KEY: 108 1 KEY_DOWN DOWN
    15:07:18.4521 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
    15:07:18.4623 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:18+0100 [-] KEY: 108 0 KEY_DOWN DOWN
    15:07:18.4644 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:18+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Unknown action 'down'! (Typo in keymap?)
    15:07:18.4663 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:18+0100 [-] [ActionMap] Keymap 'SetupActions' -> Unknown action 'down'! (Typo in keymap?)
    15:07:18.7506 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
    15:07:18.7617 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:18+0100 [-] KEY: 108 1 KEY_DOWN DOWN
    15:07:19.6450 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
    15:07:19.6562 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:19+0100 [-] KEY: 352 0 KEY_OK OK
    15:07:19.6586 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:19+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'ok'.
    15:07:19.9436 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
    15:07:19.9539 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:19+0100 [-] KEY: 352 1 KEY_OK OK
    15:07:26.5667 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 1
    15:07:26.5770 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:26+0100 [-] KEY: 174 0 KEY_EXIT EXIT
    15:07:26.5793 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:26+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'cancel'.
    15:07:26.8657 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 ae 1
    15:07:26.8759 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:26+0100 [-] KEY: 174 1 KEY_EXIT EXIT
    15:07:28.5348 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
    15:07:28.5461 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:28+0100 [-] KEY: 108 0 KEY_DOWN DOWN
    15:07:28.5484 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:28+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Unknown action 'down'! (Typo in keymap?)
    15:07:28.5504 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:28+0100 [-] [ActionMap] Keymap 'SetupActions' -> Unknown action 'down'! (Typo in keymap?)
    15:07:28.8326 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
    15:07:28.8434 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:28+0100 [-] KEY: 108 1 KEY_DOWN DOWN
    15:07:29.0940 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
    15:07:29.1051 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:29+0100 [-] KEY: 352 0 KEY_OK OK
    15:07:29.1080 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:29+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'ok'.
    15:07:29.3926 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
    15:07:29.4037 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:29+0100 [-] KEY: 352 1 KEY_OK OK
    15:07:33.6088 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 1
    15:07:33.6193 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:33+0100 [-] KEY: 174 0 KEY_EXIT EXIT
    15:07:33.6215 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:33+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'cancel'.
    15:07:33.9077 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 ae 1
    15:07:33.9204 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:33+0100 [-] KEY: 174 1 KEY_EXIT EXIT
    15:07:37.8260 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
    15:07:37.8362 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:37+0100 [-] KEY: 103 0 KEY_UP UP
    15:07:37.8383 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:37+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Unknown action 'up'! (Typo in keymap?)
    15:07:37.8410 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:37+0100 [-] [ActionMap] Keymap 'SetupActions' -> Unknown action 'up'! (Typo in keymap?)
    15:07:38.1246 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
    15:07:38.1348 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] KEY: 103 1 KEY_UP UP
    15:07:38.1413 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
    15:07:38.1518 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] KEY: 103 0 KEY_UP UP
    15:07:38.1539 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Unknown action 'up'! (Typo in keymap?)
    15:07:38.1559 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] [ActionMap] Keymap 'SetupActions' -> Unknown action 'up'! (Typo in keymap?)
    15:07:38.4396 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
    15:07:38.4499 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] KEY: 103 1 KEY_UP UP
    15:07:38.6236 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
    15:07:38.6339 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] KEY: 352 0 KEY_OK OK
    15:07:38.6360 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] [ActionMap] Keymap 'vmcscreenactions' -> Action = 'ok'.
    15:07:38.6937 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] Traceback (most recent call last):
    15:07:38.6954 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
    15:07:38.7148 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]   File "/usr/lib/enigma2/python/Plugins/Extensions/VMC/VMC_Screens_VMCConfig.py", line 1548, in keySelect
    15:07:38.7318 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]     self['baselist'].getcurrentselection()[0][1]()
    15:07:38.7337 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]   File "/usr/lib/enigma2/python/Plugins/Extensions/VMC/VMC_Screens_VMCConfig.py", line 275, in createPathManager
    15:07:38.7361 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]     cur = VMC_DBFunctions.getPathes()
    15:07:38.7379 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]   File "/usr/lib/enigma2/python/Plugins/Extensions/VMC/VMC_DBFunctions.py", line 880, in getPathes
    15:07:38.7500 {   } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-]     pathes = json.loads(pathes)
    15:07:38.7522 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-01-01 15:07:38+0100 [-] ValueError: Expected object or value
    15:07:38.7527 [ E ] python/python.cpp:210 call [ePyObject] (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x6bad5e90>>,('vmcscreenactions', 'ok')) failed)
    
    
    
    
    dmesg
    
    
    <5>sd 0:0:0:0: Attached scsi generic sg0 type 0
    <5>sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    <5>sd 0:0:0:0: [sda] Write Protect is off
    <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    <6> sda: sda1
    <5>sd 0:0:0:0: [sda] Attached SCSI disk
    <3>No PHY detected, not registering interface:1
    <7>__clk_disable: moca [0]
    <7>bcm40nm_pm_moca_disable 00
    <7>__clk_disable: moca_genet [0]
    <7>bcm40nm_pm_genet1_disable 00
    <7>__clk_disable: network [0]
    <7>bcm7425_pm_network_disable 00
    <4>bcmgenet: probe of bcmgenet.1 failed with error -5
    <6>usbcore: registered new interface driver zd1201
    <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    <6>ata2: SATA link down (SStatus 0 SControl 300)
    <7>__clk_enable: usb [1]
    <7>bcm40nm_pm_usb_enable 00
    <6>ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    <6>ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    <6>ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    <6>ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    <6>hub 1-0:1.0: USB hub found
    <6>hub 1-0:1.0: 1 port detected
    <6>ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    <6>ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    <6>ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    <6>ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    <6>hub 2-0:1.0: USB hub found
    <6>hub 2-0:1.0: 1 port detected
    <6>ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    <6>ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    <6>ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    <6>ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    <6>hub 3-0:1.0: USB hub found
    <6>hub 3-0:1.0: 1 port detected
    <6>ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    <6>ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    <6>ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    <6>ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    <6>hub 4-0:1.0: USB hub found
    <6>hub 4-0:1.0: 1 port detected
    <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    <6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    <6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    <6>ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    <6>hub 5-0:1.0: USB hub found
    <6>hub 5-0:1.0: 1 port detected
    <6>ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    <6>ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    <6>ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    <6>hub 6-0:1.0: USB hub found
    <6>hub 6-0:1.0: 1 port detected
    <6>ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    <6>ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    <6>ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    <6>hub 7-0:1.0: USB hub found
    <6>hub 7-0:1.0: 1 port detected
    <6>ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    <6>ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    <6>ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    <6>usb 4-1: new high-speed USB device number 2 using ehci-brcm
    <6>hub 8-0:1.0: USB hub found
    <6>hub 8-0:1.0: 1 port detected
    <6>usbcore: registered new interface driver usb-storage
    <6>mousedev: PS/2 mouse device common for all mice
    <6>i2c /dev entries driver
    <6>usbcore: registered new interface driver btusb
    <6>hidraw: raw HID events driver (C) Jiri Kosina
    <6>usbcore: registered new interface driver usbhid
    <6>usbhid: USB HID core driver
    <6>TCP: cubic registered
    <6>NET: Registered protocol family 10
    <6>NET: Registered protocol family 17
    <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    <6>Bluetooth: HIDP socket layer initialized
    <5>Key type dns_resolver registered
    <6>PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    <6>EBI CS1: setting up NAND flash (primary)
    <4>nand: Failed to detect ONFI extended param page
    <6>nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
    <6>nand: Micron MT29F16G08CBACAWP
    <6>nand: 2048MiB, MLC, page size: 4096, OOB size: 224
    <4>nand: Failed to detect ONFI extended param page
    <6>nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
    <6>nand: Micron MT29F16G08CBACAWP
    <6>nand: 2048MiB, MLC, page size: 4096, OOB size: 224
    <6>brcmnand brcmnand.0: 2048MiB total, 1024KiB blocks, 4KiB pages, 27B OOB, 8-bit, BCH-24 (1KiB sector)
    <6>Bad block table found at page 524032, version 0x01
    <6>Bad block table found at page 523776, version 0x01
    <6>nand_read_bbt: bad block at 0x000005a00000
    <6>nand_read_bbt: bad block at 0x000005b00000
    <5>Creating 3 MTD partitions on "brcmnand.0":
    <5>0x000000700000-0x000080000000 : "rootfs"
    <5>0x000000000000-0x000080000000 : "entire_device"
    <5>0x000000000000-0x000000700000 : "kernel"
    <6>EBI CS0: setting up SPI flash
    <6>spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    <6>spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    <4>m25p80 spi0.0: found en25q32b, expected m25p80
    <6>m25p80 spi0.0: en25q32b (4096 Kbytes)
    <5>Creating 6 MTD partitions on "spi0.0":
    <5>0x000000000000-0x0000000a0000 : "cfe"
    <5>0x0000000a0000-0x000000280000 : "splash"
    <5>0x000000280000-0x000000300000 : "macadr"
    <5>0x000000300000-0x000000380000 : "nvram"
    <5>0x000000380000-0x0000003c0000 : "bootconfig"
    <5>0x0000003c0000-0x000000400000 : "facconfig"
    <6>EBI CS3: setting up NOR flash
    <5>physmap platform flash device: 00002000 at 14000000
    <5>UBI: attaching mtd0 to ubi0
    <5>random: nonblocking pool is initialized
    <5>UBI: scanning is finished
    <5>UBI: attached mtd0 (name "rootfs", size 2041 MiB) to ubi0
    <5>UBI: PEB size: 1048576 bytes (1024 KiB), LEB size: 1040384 bytes
    <5>UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
    <5>UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
    <5>UBI: good PEBs: 2035, bad PEBs: 6, corrupted PEBs: 0
    <5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    <5>UBI: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 857144706
    <5>UBI: available PEBs: 0, total reserved PEBs: 2035, PEBs reserved for bad PEB handling: 34
    <6>ALSA device list:
    <6>  No soundcards found.
    <5>UBI: background thread "ubi_bgt0d" started, PID 68
    <5>UBIFS: background thread "ubifs_bgt0_0" started, PID 69
    <5>UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    <5>UBIFS: LEB size: 1040384 bytes (1016 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
    <5>UBIFS: FS size: 2053718016 bytes (1958 MiB, 1974 LEBs), journal size 12550144 bytes (11 MiB, 13 LEBs)
    <5>UBIFS: reserved for root: 0 bytes (0 KiB)
    <5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID 734F6CAD-6E76-492F-81E0-7AC15CE95686, small LPT model
    <6>VFS: Mounted root (ubifs filesystem) on device 0:11.
    <6>devtmpfs: mounted
    <6>Freeing unused kernel memory: 236K (80935000 - 80970000)
    <6>EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
    <4>dvb: module_layout: kernel tainted.
    <4>Disabling lock debugging due to kernel taint
    <4>*** Nexus was compiled with no error messages. For any failure, recompile with B_REFSW_DEBUG=y and retest.
    <4>[NEXUS_Platform_P_InitBoard] LCD device(14000000) => 94000000 
    <4>[platform_i2c_mutex_init] ...
    <6>fb0: bcmfb frame buffer device
    <6>input: dreambox front panel as /devices/virtual/input/input0
    <6>input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    <6>DVB: registering new adapter (dvb)
    <6>dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
    <6>dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
    <4>{169}[SemcoAPI_TDA18250A_Init] (3) tmbslTDA18250A_HwInit err: 1
    <4>{169}[DNOQ44QAH109A_Open] (3) SemcoAPI_TDA18250A_Init fail.
    <4>BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
    <4>BKNI_Malloc(linuxkernel) top users:
    <4>    blocks,   bytes, filename:line
    <4>       924,   55440, nexus/base/src/nexus_base_scheduler.c:451
    <4>{169}[fe_get_inputband] feInfo(0x00000000) invalid 
    <6>usbcore: registered new interface driver rtl8723au
    <4>{278}[ioctlVideo_SelectSource] (0) stream_source (0 -> 1) 
    <4>{278}[ioctlVideo_SelectSource] (0) stream_source (1 -> 0) 
    <7>__clk_enable: network [1]
    <7>bcm7425_pm_network_enable 00
    <7>__clk_enable: enet [1]
    <7>bcm40nm_pm_genet_enable 00
    <6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    <6>bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
    <6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    <4>{239}[CIMAX] init done.
    <4>{641}[ioctlVideo_SelectSource] (0) stream_source (0 -> 1) 
    <4>{641}[ioctlVideo_SelectSource] (0) stream_source (1 -> 0) 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[fe_get_inputband] feInfo(0x00000000) invalid 
    <4>{650}[video_videomodepreferred_read] mode(0) not found!!!
    <4>{650}[video_videomodepreferred_read] mode(0) not found!!!
    <6>EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
    <4>{650}[video_videomodepreferred_read] mode(0) not found!!!
    <4>{650}[ioctlAudio_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlVideo_SelectSource] (0) stream_source (0 -> 0) 
    <4>{1161}[ioctlVideo_SelectSource] (0) stream_source (0 -> 1) 
    <4>{1161}[ioctlAudio_SelectSource] (0) stream_source (0 -> 1) 
    <4>{650}[ioctlVideo_SelectSource] (0) stream_source (1 -> 0) 
    <4>{650}[ioctlAudio_SelectSource] (0) stream_source (1 -> 0) 
    <4>{650}[ioctlAudio_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlVideo_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlAudio_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlVideo_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlAudio_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlVideo_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlAudio_SelectSource] (0) stream_source (0 -> 0) 
    <4>{650}[ioctlVideo_SelectSource] (0) stream_source (0 -> 0)
    Angehängte Dateien Angehängte Dateien
    Geändert von mike99 (05.01.2020 um 16:28 Uhr) Grund: - in CODE gesetzt

    •   Alt Advertising

       

  2. #2
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    24.823
    Thanks (gegeben)
    4679
    Thanks (bekommen)
    9077
    Total Downloaded
    596,61 MB
    Total Downloaded
    596,61 MB
    ReceiverDanke
    Box 1:
    GB Q4K-SC / UE4K-SC / UE4K-C
     
     
    Box 2:
    GigaBlue Q-SSC / Q+-SSC
     
     
    Box 3:
    DM900uhd-SS / Vu+Duo
     
     
    Box 4:
    ZGemma H7/H9 SF8008
     
     
    Box 5:
    diverse andere . . .
     
     
    Dein Problem kommt auf jeden Fall schonmal vom VMC-Plugin. Das hast du ja sicher selbst schon geahnt.
    Ob das jemals zu 100% auf Fremd-Boxen und -Images (ist von VU für VU) ans Laufen zu bekommen ist, kann ich dir nicht sagen.
    Dein Fehler jedoch ist vor ein paar Stunden gefixt worden (typo in "json.loads(pathes)".
    Wird also mit einem Image ab dem 5./6.1.20 gefixt sein. Online-Update wird reichen.
    Grüßle
    Ralf
    ---------------------------------------------
    Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
    Astra 19.2E UniCable & KabelBW, oATV/teamBlue
    (u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  3. Thanks Don-Werner bedankten sich
  4. #3
    Anfänger
    Registriert seit
    21.01.2015
    Ort
    Fürth
    Beiträge
    9
    Thanks (gegeben)
    39
    Thanks (bekommen)
    0
    Themenstarter
    Total Downloaded
    603,68 MB
    Total Downloaded
    603,68 MB
    ReceiverDanke
    Box 1:
    Atemio Nemesis
     
     
    Danke Ralf für die Info! Ich werde gleich mal ein update machen und berichte dann hier über den Erfolg!

    Grüsse von Don-Werner


    Stürzt leider immer noch ab, sobald eine Aufnahme startet (nach unterschiedlicher Zeit). Ich habe das openATV 6.4 vom 8.1.2020 in Betrieb.
    Geändert von Don-Werner (08.01.2020 um 17:38 Uhr)

  5. #4
    Mitglied
    Registriert seit
    05.03.2018
    Beiträge
    98
    Thanks (gegeben)
    10
    Thanks (bekommen)
    4
    Total Downloaded
    80,61 MB
    Total Downloaded
    80,61 MB
    ReceiverDanke
    Box 1:
    VU+ Duo²
     
     
    Ich hab glaube das gleiche Problem..
    Nach Timeraufnahmen oder auch Streams übers Open-Webif kommt der Spinner und die Box ist eingefroren...
    Image heute erst neu geflasht (kein Update)...

  6. Thanks Don-Werner bedankten sich
  7. #5
    Anfänger
    Registriert seit
    21.01.2015
    Ort
    Fürth
    Beiträge
    9
    Thanks (gegeben)
    39
    Thanks (bekommen)
    0
    Themenstarter
    Total Downloaded
    603,68 MB
    Total Downloaded
    603,68 MB
    ReceiverDanke
    Box 1:
    Atemio Nemesis
     
     
    Ich habe VMC entfernt! Seitdem habe ich keine Abstürze mehr!

  8. #6
    Mitglied
    Registriert seit
    05.03.2018
    Beiträge
    98
    Thanks (gegeben)
    10
    Thanks (bekommen)
    4
    Total Downloaded
    80,61 MB
    Total Downloaded
    80,61 MB
    ReceiverDanke
    Box 1:
    VU+ Duo²
     
     
    VMC?
    Habe das nicht installiert.
    Aber das gleiche Problem..
    Vu+Duo2 Image vom 7.1...
    Ist reproduzierbar...

  9. #7
    e2world
    Gast
    Ohne eigenes LOG keine Hilfe möglich.

  10. #8
    Mitglied
    Registriert seit
    05.03.2018
    Beiträge
    98
    Thanks (gegeben)
    10
    Thanks (bekommen)
    4
    Total Downloaded
    80,61 MB
    Total Downloaded
    80,61 MB
    ReceiverDanke
    Box 1:
    VU+ Duo²
     
     
    Das ist es ja...
    Ich bekomme kein crash-log !!!...

    Die Box friert einfach ein und der Spinner dreht sich...

    Soeben wieder einmal wie ich vom meinem PC über das WebIF die laufende Sendung angesehen habe...

    Zurück bei der Box im WZ -> Soinner und reagiert nicht mehr auf Tastendrücke - Sender läuft aber weiter...…..

    lässt sich nur durch Ausschalten wiederbeleben...

    wo könnte ich ev. nach einem LOG suchen ??…

    Danke
    Big11

  11. #9
    Anfänger
    Registriert seit
    21.01.2015
    Ort
    Fürth
    Beiträge
    9
    Thanks (gegeben)
    39
    Thanks (bekommen)
    0
    Themenstarter
    Total Downloaded
    603,68 MB
    Total Downloaded
    603,68 MB
    ReceiverDanke
    Box 1:
    Atemio Nemesis
     
     
    \home\root\logs\

  12. #10
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    24.823
    Thanks (gegeben)
    4679
    Thanks (bekommen)
    9077
    Total Downloaded
    596,61 MB
    Total Downloaded
    596,61 MB
    ReceiverDanke
    Box 1:
    GB Q4K-SC / UE4K-SC / UE4K-C
     
     
    Box 2:
    GigaBlue Q-SSC / Q+-SSC
     
     
    Box 3:
    DM900uhd-SS / Vu+Duo
     
     
    Box 4:
    ZGemma H7/H9 SF8008
     
     
    Box 5:
    diverse andere . . .
     
     
    Ich würde bei dem Symptom eher "dmesg" aus /var/volatile/log/ auf Crash untersuchen. Das wird gegen Ende auftauchen.
    Grüßle
    Ralf
    ---------------------------------------------
    Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
    Astra 19.2E UniCable & KabelBW, oATV/teamBlue
    (u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----




Seite 1 von 75 1231151 ... LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 17:20 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,26%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com