Seite 7 von 57 ErsteErste ... 5678917 ... LetzteLetzte
Ergebnis 61 bis 70 von 568
  1. #61
    Avatar von DVB Man
    Registriert seit
    18.12.2016
    Ort
    Westerwald
    Beiträge
    404
    Thanks (gegeben)
    151
    Thanks (bekommen)
    284
    Total Downloaded
    4,53 MB
    Total Downloaded
    4,53 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue Quad UHD 4K openATV 6.4
     
     
    Box 2:
    Gigablue Quad UHD 4K openATV 6.5
     
     
    nachdem ich eben einen Sender in der Kanalliste umschalten wollte hat sich die Quad UHD 4k aufgehangen. Es folgte der Spinner und die Box war nicht mehr bedienbar. Da ich über FTP auf die Box auch nicht zugreifen konnte ist es trotzdem phänomenal, das ich über Telnet einen reboot antoßen kann. Wäre schön, wenn mal jemand darüber schauen kann.

    Anbei der crashlog
    Angehängte Dateien Angehängte Dateien
    SUPPORT IST KEIN MORD...Gruß Stefan

    Wer Antworten möchte, muss Fragen stellen!




    ____________________________________
    Receiver: GigaBlue Quad UHD 4K
    TV: Sony Bravia 65“ 4K UHD
    Samsung 55“ 4K UHD
    Empfang: TechniSat Multytenne 19,2/13/23,5/28,2 Grad Ost und Vodafone Kabel:
    Pay TV: Sky Komplett , HD+, ORF AustriaSat, SRF, HD Premium, HD Premium Plus
    Spiel: PS4
    Stream: FireTV 4K

    •   Alt Advertising

       

  2. #62
    Senior Mitglied
    Registriert seit
    12.02.2017
    Beiträge
    413
    Thanks (gegeben)
    14
    Thanks (bekommen)
    45
    Total Downloaded
    33,46 MB
    Total Downloaded
    33,46 MB
    ReceiverDankeAktivitäten
    Box 1:
    Duo 4k FBC DVB- SS2X + FBC- C oATV 6.4
     
     
    Zitat Zitat von starkert Beitrag anzeigen
    also Kraven FHD deinstalliert dann bootet Ultimo 4k auch durch ,mit Standard Skin
    Das Problem auch auf der Solo 4k mit Kraven FHD. Mit Standard Skin läuft es

  3. #63
    Avatar von madie
    Registriert seit
    05.04.2013
    Beiträge
    491
    Thanks (gegeben)
    1409
    Thanks (bekommen)
    3254
    Total Downloaded
    295,50 MB
    Total Downloaded
    295,50 MB
    ReceiverDankeAktivitäten
    Box 1:
    AX HD51
     
     
    macht neuen thread zum skin. am besten mit startlog. dann kann man mal schauen wo es hakt.
    Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]

  4. Thanks vinne bedankten sich
  5. #64
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    13.383
    Thanks (gegeben)
    708
    Thanks (bekommen)
    18793
    Themenstarter
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    dm900/920 user

    also hier geht ftp

    wenn ihr per webif flasht bitte mal prüfen ob das ok ist sehe Bild

    openATV 6.2 Unstable Public BETA Info was gibt es neues-dm900-kernel.png


    openATV we are open Source

    Boykott GPL violator

  6. #65
    Avatar von vinne
    Registriert seit
    06.04.2013
    Beiträge
    1.567
    Thanks (gegeben)
    836
    Thanks (bekommen)
    533
    Total Downloaded
    2,47 MB
    Total Downloaded
    2,47 MB
    ReceiverDankeAktivitäten
    Flashen sowieso immer mit dem Original metrix Skin.

    Andere müssen gegebenfalls angepasst werden

    Gesendet von meinem SM-G935F mit Tapatalk

  7. #66
    Senior Mitglied
    Registriert seit
    01.08.2014
    Beiträge
    220
    Thanks (gegeben)
    37
    Thanks (bekommen)
    49
    Total Downloaded
    22,25 MB
    Total Downloaded
    22,25 MB
    ReceiverDankeAktivitäten
    Box 1:
    Mutant HD51
     
     
    Box 2:
    VU UNO 4k se
     
     
    Box 3:
    OS Mini
     
     
    Box 4:
    Formuler F3
     
     
    Also auf den Feed fehlt einiges
    Tvspielfilm Mediaportal Piconmanager zum Beispiel
    Ist mir gerade zu aufwendig Manuell zu installieren.
    Bei neuen Images mach ich immer erstmal alles neu und übernehme keine Einstellungen.
    Sonst läuft soweit alles Oscam Openvpn iptvplayer ist alles Top

  8. Thanks leo123 bedankten sich
  9. #67
    Anfänger
    Registriert seit
    07.02.2017
    Ort
    Duisburg
    Beiträge
    22
    Thanks (gegeben)
    19
    Thanks (bekommen)
    5
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Box 1:
    GB UE 4K
     
     
    Box 2:
    HD51
     
     
    Box 3:
    DM 520
     
     
    warte sehnsüchtig ....das es für die DM520 kommt .....meine 900 kommt erst im neuen jahr zurück.....

  10. #68
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    13.383
    Thanks (gegeben)
    708
    Thanks (bekommen)
    18793
    Themenstarter
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    so erste bau runde ist durch, nun bauen die arm noch mal

    dann sollte der hd51 feed ok sein

    vu transcoding sollte nicht crashen


    openATV we are open Source

    Boykott GPL violator

  11. Thanks vinne bedankten sich
  12. #69
    Mitglied Avatar von Urian
    Registriert seit
    14.10.2014
    Ort
    Bavaria
    Beiträge
    66
    Thanks (gegeben)
    173
    Thanks (bekommen)
    6
    Total Downloaded
    212,95 MB
    Total Downloaded
    212,95 MB
    ReceiverDankeAktivitäten
    Box 1:
    AX HD61
     
     
    Box 2:
    Gigablue UE 4K
     
     
    Box 3:
    VU+ Uno 4K SE
     
     
    Box 4:
    Zgemma H9 Combo
     
     
    Box 5:
    Edison OS Mio+ 4k
     
     
    Hat super funktioniert. Besten Dank.

  13. #70
    Senior Mitglied
    Registriert seit
    27.10.2016
    Beiträge
    207
    Thanks (gegeben)
    13
    Thanks (bekommen)
    4
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Transcoding problem

    Bez nazwy - Google Drive

    Code:
    openATV Enigma2 crash log crashdate=sob gru 23 14:23:00 2017 compiledate=Dec 23 2017 skin=MetrixHD/skin.MySkin.xml sourcedate=2017-12-22 branch=6.2 rev=2.8.0-18468-g9a53ef8 component=Enigma2 stbmodel=ultimo4k stbmodel=dm8000 kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=616m bmem=624m@400m bmem=384m@1664m bmem=697m@2359m nimsockets=NIM Socket 0: imageversion=box_type=vuultimo4k imageissue=Welcome to openATV for %h ease channel timer 14:22:34.6740 [ ] dvb/dvb.cpp:2415 getDemux [eDVBChannel] getDemux cap=01 14:22:34.6740 [ ] dvb/epgcache.cpp:2071 startChannel [eEPGCache] next update in 2 sec 14:22:34.6740 [ ] dvb/dvb.cpp:1103 allocateDemux [eDVBResourceManager] allocate demux cap=01 14:22:34.6740 [ ] dvb/dvb.cpp:1212 allocateDemux [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0 14:22:34.6740 [ ] dvb/pmt.cpp:77 channelStateChanged [eDVBServicePMTHandler] ok ... now we start!! 14:22:34.6741 [ ] service/servicedvbrecord.cpp:37 serviceEvent [eDVBServiceRecord] RECORD service event 5 14:22:34.6743 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6746 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6751 [ ] dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:1:3ABD:514:13E:820000:0:0:0::TVP 1 HD 14:22:34.6752 [ ] dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:1:3ABD:514:13E:820000:0:0:0::TVP 1 HD 14:22:34.6753 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.6754 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0 14:22:34.6760 [ ] service/servicedvbrecord.cpp:37 serviceEvent [eDVBServiceRecord] RECORD service event 6 14:22:34.6760 [ ] service/servicedvbrecord.cpp:42 serviceEvent [eDVBServiceRecord] tuned.. 14:22:34.6760 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.6761 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18 14:22:34.6766 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6770 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6772 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.6773 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0 14:22:34.6779 [ ] dvb/dvb.cpp:2415 getDemux [eDVBChannel] getDemux cap=01 14:22:34.6779 [ ] dvb/pmt.cpp:77 channelStateChanged [eDVBServicePMTHandler] ok ... now we start!! 14:22:34.6779 [ ] service/servicedvbrecord.cpp:37 serviceEvent [eDVBServiceRecord] RECORD service event 5 14:22:34.6781 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6784 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6786 [ ] dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 1 service 1:0:1:3ABD:514:13E:820000:0:0:0::TVP 1 HD 14:22:34.6786 [ ] dvb/cahandler.cpp:624 buildCAPMT [eDVBCAService] don't build/send the same CA PMT twice 14:22:34.6787 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.6787 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0 14:22:34.6796 [ ] service/servicedvbrecord.cpp:37 serviceEvent [eDVBServiceRecord] RECORD service event 6 14:22:34.6796 [ ] service/servicedvbrecord.cpp:42 serviceEvent [eDVBServiceRecord] tuned.. 14:22:34.6796 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.6797 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18 14:22:34.6804 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6807 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:34.6809 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.6810 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0 14:22:34.7335 [ ] dvb/pmt.cpp:207 PATready [eDVBServicePMTHandler] PATready 14:22:34.7336 [ ] dvb/pmt.cpp:218 PATready [eDVBServicePMTHandler] PAT TSID: 0x0514 (1300) 14:22:34.7336 [ ] dvb/pmt.cpp:247 PATready [eDVBServicePMTHandler] use pmtpid 040d for service_id 3abd 14:22:34.7336 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7337 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1037 14:22:34.7343 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7343 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0 14:22:34.7364 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7364 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1001 14:22:34.7367 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7367 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=17 14:22:34.7378 [ ] dvb/pmt.cpp:207 PATready [eDVBServicePMTHandler] PATready 14:22:34.7378 [ ] dvb/pmt.cpp:218 PATready [eDVBServicePMTHandler] PAT TSID: 0x0514 (1300) 14:22:34.7378 [ ] dvb/pmt.cpp:247 PATready [eDVBServicePMTHandler] use pmtpid 040d for service_id 3abd 14:22:34.7378 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7379 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1037 14:22:34.7387 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7388 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0 14:22:34.7404 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7405 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1001 14:22:34.7410 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7411 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=17 14:22:34.7563 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7564 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1003 14:22:34.7568 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.7568 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1003 14:22:34.8000 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.8000 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1004 14:22:34.8005 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.8005 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1004 14:22:34.8753 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.8753 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1008 14:22:34.8757 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.8758 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1008 14:22:34.9291 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.9292 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1009 14:22:34.9298 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:34.9299 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1009 14:22:34.9772 [ ] dvb/frontend.cpp:2260 tuneLoopInt [SEC] set dynamic current limiting 14:22:35.0344 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.0349 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1054 14:22:35.0355 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.0357 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1054 14:22:35.1120 [!W!] dvb/frontend.cpp:1714 readFrontendData [eDVBFrontend] Slow ioctl 'FE_GET_PROPERTY(DTV_FREQUENCY)', potential driver issue, 36ms 14:22:35.1123 [ ] dvb/pmt.cpp:950 SDTScanEvent [eDVBServicePMTHandler] sdt update done! 14:22:35.1545 [!W!] dvb/frontend.cpp:1714 readFrontendData [eDVBFrontend] Slow ioctl 'FE_GET_PROPERTY(DTV_FREQUENCY)', potential driver issue, 41ms 14:22:35.1546 [ ] dvb/pmt.cpp:950 SDTScanEvent [eDVBServicePMTHandler] sdt update done! 14:22:35.1552 [ ] service/servicedvbrecord.cpp:37 serviceEvent [eDVBServiceRecord] RECORD service event 5 14:22:35.1552 [ ] service/servicedvbrecord.cpp:328 doRecord [eDVBServiceRecord] start streaming... 14:22:35.1556 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1561 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.1562 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3066 14:22:35.1570 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1574 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1577 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1580 [ ] dvb/cahandler.cpp:624 buildCAPMT [eDVBCAService] don't build/send the same CA PMT twice 14:22:35.1581 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.1582 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1037 14:22:35.1592 [ ] service/servicedvbrecord.cpp:37 serviceEvent [eDVBServiceRecord] RECORD service event 5 14:22:35.1593 [ ] service/servicedvbrecord.cpp:328 doRecord [eDVBServiceRecord] start streaming... 14:22:35.1594 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1597 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1601 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.1602 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3066 14:22:35.1612 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1615 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:22:35.1618 [ ] dvb/cahandler.cpp:624 buildCAPMT [eDVBCAService] don't build/send the same CA PMT twice 14:22:35.1618 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.1619 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1037 14:22:35.2759 [ ] dvb/pmt.cpp:293 AITready [eDVBServicePMTHandler] AITready 14:22:35.2759 [ ] dvb/pmt.cpp:312 AITready [eDVBServicePMTHandler] Section Length : 85, Total Section Length : 88 14:22:35.2760 [ ] dvb/pmt.cpp:323 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 73726576, orgid : 45, appid : 24576 14:22:35.2760 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.2761 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3067 14:22:35.2764 [ ] dvb/pmt.cpp:460 AITready [eDVBServicePMTHandler] No found anything. 14:22:35.2766 [ ] dvb/pmt.cpp:293 AITready [eDVBServicePMTHandler] AITready 14:22:35.2766 [ ] dvb/pmt.cpp:312 AITready [eDVBServicePMTHandler] Section Length : 85, Total Section Length : 88 14:22:35.2766 [ ] dvb/pmt.cpp:323 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 6e6f6973, orgid : 45, appid : 24576 14:22:35.2767 [ ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0 14:22:35.2767 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3067 14:22:35.2772 [ ] dvb/pmt.cpp:460 AITready [eDVBServicePMTHandler] No found anything. 14:22:36.6830 [ ] dvb/epgcache.cpp:1594 startEPG [eEPGCache] start caching events(1514035356) 14:22:36.6831 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3842 14:22:36.6835 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3003 14:22:36.6839 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18 14:22:36.6849 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18 14:22:36.6860 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18 14:22:36.6874 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5000 14:22:36.6877 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5000 14:22:36.6883 [ ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=57 14:22:43.6886 [ ] dvb/epgcache.cpp:1981 abortNonAvail [eEPGCache] abort non avail netmed schedule reading 14:22:43.6893 [ ] dvb/epgcache.cpp:1988 abortNonAvail [eEPGCache] abort non avail netmed schedule other reading 14:22:43.6894 [ ] dvb/epgcache.cpp:1997 abortNonAvail [eEPGCache] abort non avail FreeSat schedule_other reading 14:22:43.6897 [ ] dvb/epgcache.cpp:2008 abortNonAvail [eEPGCache] abort non avail viasat reading 14:22:52.3546 { } Components/NetworkTime.py:33 timecheck [NTP]: Updating 14:22:52.3547 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh 14:22:59.2271 { } Components/NetworkTime.py:42 update_schedule [NTP]: setting E2 unixtime: 1514035379.23 14:22:59.2272 { } Components/NetworkTime.py:43 update_schedule [NTP]: setting E2 realtime: Sat Dec 23 14:22:59 2017 14:22:59.3374 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 82(16) 14:23:00.4519 { } Components/Sources/StreamService.py:47 execEnd StreamService execEnd 1:0:1:3ABD:514:13E:820000:0:0:0::TVP 1 HD 14:23:00.4520 [ ] service/servicedvbrecord.cpp:179 stop [eDVBServiceRecord] stop recording! 14:23:00.4522 [ E ] service/servicedvbrecord.cpp:586 saveCutlist [eDVBServiceRecord] saving cutlist failed because tstools failed 14:23:00.4524 { } Components/Sources/StreamService.py:28 recordEvent RECORD event for us:  > 14:23:00.4529 { D } Traceback (most recent call last): 14:23:00.4530 { D } File "/usr/lib/enigma2/python/Navigation.py", line 240, in dispatchRecordEvent 14:23:00.4532 { D } File "/home/oe1/atv61/build-enviroment/builds/openatv/release/vuultimo4k/tmp/work/all-oe-linux-gnueabi/enigma2-plugin-extensions-openwebif/1.2+gitAUTOINC+2bf46617e7-r0/git/plugin/controllers/stream.py", line 54, in requestWrite 14:23:00.4534 { D } File "/usr/lib/python2.7/site-packages/twisted/web/server.py", line 234, in write 14:23:00.4536 { D } File "/usr/lib/python2.7/site-packages/twisted/web/http.py", line 1086, in write 14:23:00.4537 { D } AttributeError: 'NoneType' object has no attribute 'write' 14:23:00.4538 [ E ] python/python.cpp:209 call [ePyObject] (PyObject_CallObject(,( >, 5)) failed) dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.28-1.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sat Dec 23 03:24:47 CET 2017 [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: ULTIMO4K [ 0.000000] moving dtb from 0x0000000007628000 to 0x0000000000946df8 [ 0.000000] bmem: Reserved 624 MiB at 0x0000000019000000 [ 0.000000] bmem: Reserved 384 MiB at 0x0000000068000000 [ 0.000000] bmem: Reserved 697 MiB at 0x0000000093700000 [ 0.000000] cma: Reserved 16 MiB at 0x0000000017800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 786432 [ 0.000000] Normal zone: 784 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 100352 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5360 pages used for memmap [ 0.000000] HighMem zone: 686080 pages, LIFO batch:31 [ 0.000000] MCP: Enabling write pairing [ 0.000000] PERCPU: Embedded 8 pages/cpu @d5fb0000 s9728 r8192 d14848 u32768 [ 0.000000] pcpu-alloc: s9728 r8192 d14848 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 785648 [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=616m bmem=624m@400m bmem=384m@1664m bmem=697m@2359m [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 1344496K/3145728K available (6594K kernel code, 353K rwdata, 2048K rodata, 265K init, 202K bss, 1784848K reserved, 16384K cma-reserved, 994292K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd9000000 - 0xff000000 ( 608 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd8800000 ( 392 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0878ab4 (8643 kB) [ 0.000000] .init : 0xc0879000 - 0xc08bb600 ( 266 kB) [ 0.000000] .data : 0xc08bc000 - 0xc0914598 ( 354 kB) [ 0.000000] .bss : 0xc09145a0 - 0xc0946df8 ( 203 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 94) [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64) [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 96) [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 48) [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt). [ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns [ 0.000010] Switching to timer-based delay loop [ 0.000253] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000) [ 0.000263] pid_max: default: 32768 minimum: 301 [ 0.000363] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000368] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.005839] CPU: Testing write buffer coherency: ok [ 0.006042] CPU0: update cpu_power 1024 [ 0.006048] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006176] Setting up static identity map for 0x64b498 - 0x64b4f0 [ 0.008707] CPU1: Booted secondary processor [ 0.008723] CPU1: update cpu_power 1024 [ 0.008726] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009386] CPU2: Booted secondary processor [ 0.009398] CPU2: update cpu_power 1024 [ 0.009401] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010028] CPU3: Booted secondary processor [ 0.010039] CPU3: update cpu_power 1024 [ 0.010042] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010126] Brought up 4 CPUs [ 0.010143] SMP: Total of 4 processors activated. [ 0.010148] CPU: All CPU(s) started in SVC mode. [ 0.010560] devtmpfs: initialized [ 0.014225] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0 [ 0.015223] regulator-dummy: no parameters [ 0.015407] NET: Registered protocol family 16 [ 0.017545] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.018223] cpuidle: using governor ladder [ 0.018228] cpuidle: using governor menu [ 0.021443] irq: no irq domain found for /rdb/interrupt-controller@f040a780 ! [ 0.021587] irq: no irq domain found for /rdb/interrupt-controller@f0417280 ! [ 0.025537] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 ! [ 0.025797] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040451b] registered [ 0.026575] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered [ 0.026731] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered [ 0.026873] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered [ 0.027014] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered [ 0.027174] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered [ 0.027327] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered [ 0.027478] syscon f1201004.syscon: regmap [mem 0xf1201004-0xf1201403] registered [ 0.027615] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered [ 0.027748] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered [ 0.027991] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered [ 0.028133] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered [ 0.028279] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered [ 0.028843] irq: no irq domain found for /rdb/interrupt-controller@f0417280 ! [ 0.029405] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered [ 0.029555] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered [ 0.029857] No ATAGs? [ 0.029876] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.029881] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.030003] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478 [ 0.044763] bio: create slab  at 0 [ 0.045482] SCSI subsystem initialized [ 0.045697] libata version 3.00 loaded. [ 0.046332] usbcore: registered new interface driver usbfs [ 0.046416] usbcore: registered new interface driver hub [ 0.046506] usbcore: registered new device driver usb [ 0.046633] Linux video capture interface: v2.00 [ 0.046844] pps_core: LinuxPPS API ver. 1 registered [ 0.046849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti  [ 0.046903] PTP clock support registered [ 0.047507] Advanced Linux Sound Architecture Driver Initialized. [ 0.048231] cfg80211: Calling CRDA to update world regulatory domain [ 0.048704] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT [ 0.048880] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT [ 0.149197] brcm-pci f0460000.pcie: link down [ 0.249218] brcm-pci f0490000.pcie: link down [ 0.249268] Switched to clocksource arch_sys_counter [ 0.249464] FS-Cache: Loaded [ 0.251223] thermal thermal_zone0: failed to read out thermal zone 0 [ 0.251321] NET: Registered protocol family 2 [ 0.251714] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.251740] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.251784] TCP: Hash tables configured (established 4096 bind 4096) [ 0.251847] TCP: reno registered [ 0.251854] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.251865] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.251981] NET: Registered protocol family 1 [ 0.252166] RPC: Registered named UNIX socket transport module. [ 0.252172] RPC: Registered udp transport module. [ 0.252175] RPC: Registered tcp transport module. [ 0.252179] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.252186] PCI: CLS 0 bytes, default 64 [ 0.252437] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.253720] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.254446] bounce pool size: 64 pages [ 0.254977] NFS: Registering the id_resolver key type [ 0.255006] Key type id_resolver registered [ 0.255011] Key type id_legacy registered [ 0.255020] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.255025] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.255175] FS-Cache: Netfs 'cifs' registered for caching [ 0.255233] Key type cifs.spnego registered [ 0.255422] fuse init (API version 7.22) [ 0.255581] SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled [ 0.255878] msgmni has been set to 715 [ 0.256660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.256667] io scheduler noop registered [ 0.256671] io scheduler deadline registered [ 0.256691] io scheduler cfq registered (default) [ 0.256907] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259 [ 0.287701] brcm-waketimer f0417580.waketimer: registered, with irq 260 [ 0.287978] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.289374] f040ab00.serial: ttyS0 at MMIO 0xf040ab00 (irq = 107, base_baud = 5062500) is a 16550A [ 1.123844] console [ttyS0] enabled [ 1.127729] f040ab40.serial: ttyS1 at MMIO 0xf040ab40 (irq = 108, base_baud = 5062500) is a 16550A [ 1.137075] f040ab80.serial: ttyS2 at MMIO 0xf040ab80 (irq = 109, base_baud = 5062500) is a 16550A [ 1.149617] loop: module loaded [ 1.153385] ahci brcmstb-ahci.0: can't get clock [ 1.158097] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled [ 1.175283] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.183914] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part [ 1.193549] scsi0 : ahci_platform [ 1.197204] scsi1 : ahci_platform [ 1.200758] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 62 [ 1.208691] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 62 [ 1.217894] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address [ 1.224289] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated [ 1.231602] m25p80 spi32766.0: found mx25l3255e, expected m25p80 [ 1.237628] m25p80 spi32766.0: mx25l3255e (4096 Kbytes) [ 1.242885] 5 ofpart partitions found on MTD device spi32766.0 [ 1.248730] Creating 5 MTD partitions on "spi32766.0": [ 1.253883] 0x000000000000-0x000000200000 : "flash0.bolt" [ 1.259971] 0x000000200000-0x000000210000 : "flash0.macadr" [ 1.266185] 0x000000210000-0x000000220000 : "flash0.nvram" [ 1.272330] 0x000000220000-0x000000230000 : "flash0.devtree" [ 1.278644] 0x000000000000-0x000000400000 : "flash0" [ 1.285322] libphy: Fixed MDIO Bus: probed [ 1.291880] libphy: unimac MII bus: probed [ 1.300230] unimac-mdio f0b403c0.mdio: Broadcom UniMAC MDIO bus at 0xfcb403c0 [ 1.308212] brcm-systemport f04a0000.ethernet: Broadcom SYSTEMPORTv 1.00 at 0xfc4a0000 (irqs: 54, 55, TXQs: 32, RXQs: 1) [ 1.321775] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.327622] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.334084] xhci-brcm: xHCI BRCM driver [ 1.338013] xhci-brcm f0471000.xhci_v2: xHCI Host Controller [ 1.343829] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1 [ 1.351943] xhci-brcm f0471000.xhci_v2: irq 115, io mem 0xf0471000 [ 1.358668] hub 1-0:1.0: USB hub found [ 1.362449] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 1.369710] xhci-brcm f0471000.xhci_v2: xHCI Host Controller [ 1.375526] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2 [ 1.383847] hub 2-0:1.0: USB hub found [ 1.387626] hub 2-0:1.0: 2 ports detected [ 1.392038] ehci-brcm: EHCI BRCM driver [ 1.395951] ehci-brcm f0470300.ehci_v2: EHCI Host Controller [ 1.401759] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3 [ 1.419709] ehci-brcm f0470300.ehci_v2: irq 111, io mem 0xf0470300 [ 1.431275] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00 [ 1.437942] hub 3-0:1.0: USB hub found [ 1.441721] hub 3-0:1.0: 1 port detected [ 1.445862] ehci-brcm f0470500.ehci_v2: EHCI Host Controller [ 1.451679] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4 [ 1.469626] ehci-brcm f0470500.ehci_v2: irq 112, io mem 0xf0470500 [ 1.481274] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00 [ 1.482286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.482861] ata1.00: ATA-9: WDC WD10SPCX-24HWST1, 02.01A02, max UDMA/133 [ 1.482864] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.483482] ata1.00: configured for UDMA/133 [ 1.483699] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-24H 02.0 PQ: 0 ANSI: 5 [ 1.520106] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.520319] hub 4-0:1.0: USB hub found [ 1.520339] hub 4-0:1.0: 1 port detected [ 1.520589] ehci-brcm f0480300.ehci_v2: EHCI Host Controller [ 1.520755] ehci-brcm f0480300.ehci_v2: new USB bus registered, assigned bus number 5 [ 1.548967] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.549060] ehci-brcm f0480300.ehci_v2: irq 117, io mem 0xf0480300 [ 1.549251] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.554270] ehci-brcm f0480300.ehci_v2: USB 2.0 started, EHCI 1.00 [ 1.554796] hub 5-0:1.0: USB hub found [ 1.554819] hub 5-0:1.0: 1 port detected [ 1.555054] ehci-brcm f0480500.ehci_v2: EHCI Host Controller [ 1.555212] ehci-brcm f0480500.ehci_v2: new USB bus registered, assigned bus number 6 [ 1.565325] ehci-brcm f0480500.ehci_v2: irq 118, io mem 0xf0480500 [ 1.571270] ehci-brcm f0480500.ehci_v2: USB 2.0 started, EHCI 1.00 [ 1.571794] hub 6-0:1.0: USB hub found [ 1.571813] hub 6-0:1.0: 1 port detected [ 1.572187] ohci-brcm: OHCI BRCM driver [ 1.572271] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller [ 1.572424] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 7 [ 1.572466] ohci-brcm f0470400.ohci_v2: irq 113, io mem 0xf0470400 [ 1.627783] hub 7-0:1.0: USB hub found [ 1.627804] hub 7-0:1.0: 1 port detected [ 1.628039] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller [ 1.628200] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 8 [ 1.628238] ohci-brcm f0470600.ohci_v2: irq 114, io mem 0xf0470600 [ 1.659276] ata2: SATA link down (SStatus 0 SControl 300) [ 1.669538] sd 0:0:0:0: [sda] Write Protect is off [ 1.674346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.674401] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.682811] hub 8-0:1.0: USB hub found [ 1.682832] hub 8-0:1.0: 1 port detected [ 1.683085] ohci-brcm f0480400.ohci_v2: BRCM OHCI controller [ 1.683269] ohci-brcm f0480400.ohci_v2: new USB bus registered, assigned bus number 9 [ 1.683307] ohci-brcm f0480400.ohci_v2: irq 119, io mem 0xf0480400 [ 1.738771] hub 9-0:1.0: USB hub found [ 1.742552] hub 9-0:1.0: 1 port detected [ 1.746702] ohci-brcm f0480600.ohci_v2: BRCM OHCI controller [ 1.752534] ohci-brcm f0480600.ohci_v2: new USB bus registered, assigned bus number 10 [ 1.760504] ohci-brcm f0480600.ohci_v2: irq 120, io mem 0xf0480600 [ 1.821750] hub 10-0:1.0: USB hub found [ 1.825628] usb 4-1: new high-speed USB device number 2 using ehci-brcm [ 1.831278] hub 10-0:1.0: 1 port detected [ 1.836341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.842891] ehci-pci: EHCI PCI platform driver [ 1.847452] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.853652] ohci-pci: OHCI PCI platform driver [ 1.858431] usbcore: registered new interface driver usb-storage [ 1.864614] mousedev: PS/2 mouse device common for all mice [ 1.870608] i2c /dev entries driver [ 1.874492] IR NEC protocol handler initialized [ 1.879035] IR RC5(x) protocol handler initialized [ 1.883836] IR RC6 protocol handler initialized [ 1.888375] IR JVC protocol handler initialized [ 1.892914] IR Sony protocol handler initialized [ 1.897540] IR RC5 (streamzap) protocol handler initialized [ 1.903122] IR SANYO protocol handler initialized [ 1.907835] IR MCE Keyboard/mouse protocol handler initialized [ 1.914015] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver [ 1.921786] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.927618] sdhci: Secure Digital Host Controller Interface driver [ 1.933812] sdhci: Copyright(c) Pierre Ossman [ 1.938178] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.944984] mmc0: no vqmmc regulator found [ 1.949093] mmc0: no vmmc regulator found [ 1.983275] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA [ 1.990971] hidraw: raw HID events driver (C) Jiri Kosina [ 1.996754] usbcore: registered new interface driver usbhid [ 2.002344] usbhid: USB HID core driver [ 2.008679] TCP: cubic registered [ 2.013266] NET: Registered protocol family 10 [ 2.018275] NET: Registered protocol family 17 [ 2.022842] Distributed Switch Architecture driver version 0.1 [ 2.028733] sys0[0]: detected a Broadcom Starfighter 2 switch [ 2.034695] Starfighter 2 top: 4.00, core: 2.00 base: 0xfcb00000, IRQs: 56, 57 [ 2.042096] libphy: dsa slave smi: probed [ 2.061915] mmc0: BKOPS_EN bit is not set [ 2.065970] usb 5-1: new high-speed USB device number 2 using ehci-brcm [ 2.078517] mmc0: new high speed MMC card at address 0001 [ 2.084209] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB [ 2.088849] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB [ 2.094880] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB [ 2.100898] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB [ 2.102274] f0b403c0.mdio:05: Broadcom BCM7445 PHY revision: 0x10, patch: 3 [ 2.116712] mmcblk0: p1 p2 p3 p4 [ 2.121762] mmcblk0boot1: unknown partition table [ 2.127298] mmcblk0boot0: unknown partition table [ 2.187479] hub 5-1:1.0: USB hub found [ 2.191337] hub 5-1:1.0: 4 ports detected [ 2.336305] attached PHY at address 5 [Broadcom BCM7445] [ 2.342136] net eth0: PHY already attached [ 2.346433] Key type dns_resolver registered [ 2.350816] Registering SWP/SWPB emulation handler [ 2.356038] regulator-dummy: disabling [ 2.363020] ALSA device list: [ 2.366000] No soundcards found. [ 2.470340] usb 5-1.1: new high-speed USB device number 3 using ehci-brcm [ 2.637337] usb 5-1.2: new full-speed USB device number 4 using ehci-brcm [ 3.772714] sda: sda1 [ 3.775833] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.781518] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support! [ 4.324543] random: nonblocking pool is initialized [ 4.950708] EXT4-fs (mmcblk0p4): recovery complete [ 4.955942] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal [ 4.964860] VFS: Mounted root (ext4 filesystem) on device 179:4. [ 4.972202] devtmpfs: mounted [ 4.975398] Freeing unused kernel memory: 264K (c0879000 - c08bb000) [ 5.814456] EXT4-fs (sda1): recovery complete [ 5.872741] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null) [ 6.216979] it913x: Chip Version=02 Chip Type=9135 [ 6.223091] it913x: Remote propriety (raw) modeit913x: Dual mode=0 Tuner Type=0 [ 6.230890] it913x: Unknown tuner ID applying default 0x60[ 6.237968] usb 4-1: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state [ 6.246231] usb 4-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw' [ 6.254585] it913x: FRM Starting Firmware Download [ 6.473962] it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=02 Chip Type=9135 [ 6.516212] it913x: Firmware Version 52887808[ 6.582594] usb 4-1: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in warm state [ 6.590414] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 6.602631] DVB: registering new adapter (ITE 9135(9005) Generic) [ 6.614758] it913x-fe: ADF table value:00 [ 6.622717] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01 [ 6.666088] it913x-fe: Tuner LNA type :60 [ 6.908970] usb 4-1: DVB: registering adapter 1 frontend 0 (ITE 9135(9005) Generic_1)... [ 6.917421] Registered IR keymap rc-it913x-v2 [ 6.922302] input: ITE 9135(9005) Generic as /devices/rdb.3/f0470500.ehci_v2/usb4/4-1/rc/rc0/input0 [ 6.931617] rc0: ITE 9135(9005) Generic as /devices/rdb.3/f0470500.ehci_v2/usb4/4-1/rc/rc0 [ 6.939913] usb 4-1: dvb_usb_v2: schedule remote query interval to 250 msecs [ 6.946985] usb 4-1: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully initialized and connected [ 6.955997] usbcore: registered new interface driver dvb_usb_it913x [ 6.993146] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal [ 8.417611] usbcore: registered new interface driver dbus_usbdev [ 8.463594] usb 5-1.1: USB disconnect, device number 3 [ 8.492889] IPv6: ADDRCONF(NETDEV_UP): sys0: link is not ready [ 8.509702] bcm_event: module license 'Proprietary' taints kernel. [ 8.515906] Disabling lock debugging due to kernel taint [ 8.646483] usb 5-1.1: new high-speed USB device number 5 using ehci-brcm [ 8.741748] Dongle Host Driver, version 1.363.110.16 (r620666) [ 8.741748] Compiled in on Oct 27 2016 at 18:59:23 [ 8.755430] Register interface [wlan3] MAC: 00:90:4c:11:22:33 [ 8.755430] [ 10.494290] libphy: fixed-0:00 - Link is Up - 1000/Full [ 10.499564] IPv6: ADDRCONF(NETDEV_CHANGE): sys0: link becomes ready [ 12.981883] DVB: registering new adapter (_vuplus_ultimo4k_) [ 13.356364] bcm7444: hotplug_callback(): [ 13.356364] Hotplug - status.connected 1:0:1 [ 13.363376] bcm7444: hotplug_callback(): [ 13.363376] Hotplug - connecting HDMI to display 0xe [ 13.488271] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $ [ 13.602295] [MPVR]: >> misc_pvr_init [ 13.609633] [VID]: 6bcm7335_video_init [ 13.688793] [AUD]: 6bcm7335_audio_init [ 13.693564] [AUD]: >> bcm_audio_capture_init [ 13.702328] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3769000 state=d1779800 config=bf8eeb58 [ 13.727805] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.735966] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a23800 state=d1779000 config=bf8eeb60 [ 13.756998] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.765000] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a23000 state=d1d6b800 config=bf8eeb68 [ 13.785384] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.793238] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a24800 state=d1d6b000 config=bf8eeb70 [ 13.813670] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.821612] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a24000 state=d1dc7800 config=bf8eeb78 [ 13.843593] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.851613] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a26800 state=d1594000 config=bf8eeb80 [ 13.874092] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.881940] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a26000 state=d15a6800 config=bf8eeb88 [ 13.902211] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.910426] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2a27800 state=d15a6000 config=bf8eeb90 [ 13.931337] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 13.939557] -----------8 slot is empty ---------------- [ 13.944845] -----------9 slot is empty ---------------- [ 13.950102] -----------10 slot is empty ---------------- [ 13.955438] -----------11 slot is empty ---------------- [ 13.960774] -----------12 slot is empty ---------------- [ 13.966113] -----------13 slot is empty ---------------- [ 13.971447] -----------14 slot is empty ---------------- [ 13.976782] -----------15 slot is empty ---------------- [ 13.982115] -----------16 slot is empty ---------------- [ 13.987450] -----------17 slot is empty ---------------- [ 13.992783] bcm7444: bcm7335_frontend_init(): vtuner1 : 9 [ 14.016280] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704 [ 14.024151] BKNI_Malloc(linuxkernel) top users: [ 14.024151] blocks, bytes, filename:line [ 14.033152] 1039, 229892, BSEAV/lib/utils/balloc.c:31 [ 14.082771] input: dreambox advanced remote control (native) as /devices/virtual/input/input1 [ 14.095914] [LCD]: registered [ 14.436565] GPIO Init... [ 14.449483] [CI]: registered ci0 [ 14.453422] [CI]: registered ci1 [ 14.461828] [CI]: CI interface initialised [ 14.461828] [ 14.477571] [DFP]: registered dbox fp [ 14.484942] [SC]: registered sci0 [ 14.489360] [SC]: registered sci1 [ 14.643280] system_time_set wakeup mode get [ 14.707274] system_time_set wakeup mode get 0xc4 [ 14.740206] BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080 [ 14.748836] BKNI_Malloc(linuxkernel) top users: [ 14.748836] blocks, bytes, filename:line [ 14.757862] 2434, 531368, BSEAV/lib/utils/balloc.c:31 [ 14.896458] FPGA Version 0x11 [ 15.022523] wakeup_drv: Initializing wakeup driver [ 15.027626] wakeup_drv: Initialization complete [ 15.095600] [VID]: VIDEO_SET_STREAMTYPE 0 [ 15.099760] [VID]: VIDEO_SELECT_SOURCE 1 0 [ 15.104030] [VID]: VIDEO_PLAY 1 2 0 [ 15.113171] [VID]: VIDEO_CONTINUE 1 1 [ 15.117078] [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [ 15.392379] [VID]: VIDEO_STOP 0 1 [ 15.396687] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 15.481387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.392344] libphy: f0b403c0.mdio:05 - Link is Down [ 19.424329] libphy: f0b403c0.mdio:05 - Link is Up - 1000/Full [ 19.430102] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.680600] svc: failed to register nfsdv3 RPC service (errno 111). [ 21.686939] svc: failed to register nfsaclv3 RPC service (errno 111). [ 22.950681] Bluetooth: Core ver 2.18 [ 22.956044] NET: Registered protocol family 31 [ 22.960576] Bluetooth: HCI device and connection manager initialized [ 22.967295] Bluetooth: HCI socket layer initialized [ 22.973301] Bluetooth: L2CAP socket layer initialized [ 22.978976] Bluetooth: SCO socket layer initialized [ 24.766572] [VID]: VIDEO_SET_STREAMTYPE 0 [ 24.771182] [VID]: VIDEO_SELECT_SOURCE 1 0 [ 24.775497] [VID]: VIDEO_PLAY 1 2 0 [ 24.784391] [VID]: VIDEO_CONTINUE 1 1 [ 24.788246] [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [ 25.063388] [VID]: VIDEO_STOP 0 1 [ 25.067890] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 25.214022] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)... [ 30.727059] [AUD]: AUDIO_SET_MUTE 0 [ 30.731111] [AUD]: AUDIO_SET_MIXER -791519608 [ 30.735626] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [ 30.740719] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [ 30.747551] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 35.643668] [AUD]: AUDIO_SET_MIXER -791519608 [ 35.648159] [AUD]: AUDIO_SET_MIXER : amixl 7, amixr 7 [ 35.653251] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 35.660433] [AUD]: AUDIO_SET_MIXER : next left volume -570, right volume -570 [ 40.854477] FE tune [ 41.282506] [AUD]: AUDIO_SELECT_SOURCE 0 [ 41.287096] [AUD]: AUDIO_SET_BYPASS_MODE 1 [ 41.291613] [AUD]: downmix 0 state : 0 [ 41.295470] [AUD]: AUDIO_PAUSE 0 [ 41.298838] [AUD]: AUDIO_PLAY 0 decoder start : 0 [ 41.304611] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 41.308857] [VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720 [ 41.315575] [VID]: VIDEO_GET_SIZE aspect: 1 3 [ 41.319984] [VID]: VIDEO_SET_STREAMTYPE 1 [ 41.324221] [VID]: VIDEO_FREEZE 0 0 [ 41.327835] [VID]: VIDEO_PLAY 0 5 2 [ 41.338455] [VID]: VIDEO_SLOWMOTION 0 1 [ 41.343483] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 41.349349] [VID]: VIDEO_CONTINUE 0 1 [ 41.354485] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd1539900 [ 41.360828] [AUD]: Mute : 0 [ 41.365167] [AUD]: AUDIO_CHANNEL_SELECT 0 [ 65.508909] [VID]: VIDEO_STOP 1 1 [ 65.512488] [AUD]: AUDIO_STOP 0 [ 65.524126] [AUD]: AUDIO_CONTINUE 0 0 aph=0x0 [ 65.528508] [AUD]: AUDIO_CONTINUE aph=0 0 0 [ 1601.859293] FE tune [ 1825.150406] FE tune
    Wysłane z mojego ONEPLUS A5010 przy użyciu Tapatalka
    Geändert von djmarco (23.12.2017 um 14:32 Uhr)


Seite 7 von 57 ErsteErste ... 5678917 ... LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 10:15 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2021 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com