wlan-mäßig scheint nichts installiert...
Code:root@gb4k-216:~# opkg list-installed | grep -i wlan
root@gb4k-216:~# free
total used free shared buff/cache available
Mem: 2067648 1304584 658472 152 104592 705304
Swap: 670716 0 670716
Druckbare Version
wlan-mäßig scheint nichts installiert...
Code:root@gb4k-216:~# opkg list-installed | grep -i wlan
root@gb4k-216:~# free
total used free shared buff/cache available
Mem: 2067648 1304584 658472 152 104592 705304
Swap: 670716 0 670716
Wlan müsste via default drin sein.
Den kompletten Adapter würde ich deinstallieren.
und testen.
Ok die Box swapt auch, wenngleich da gerade null gebraucht wird.
Das könnte auch ein Fehler auslösen.
Ich weiß zwar nicht warum einige die Probleme haben und andere nicht bemerken.
Recently, someone complained (in the ENG thread of this forum) of a non-existent rotating wheel (spinner) during a loaded Enigma 2. Can not it be related to this problem? I do not know who and I do not know how, but this problem was solved quickly by the guys
I repeat, but I do not think the problem will be in the active DVB tuners. I do not shut down either the Udpxy (IPTV) service when I activate the standby mode. Sometimes a few weeks ago, when the Standby mode was activated, the Udpxy process was stopped (but it remained awaiting and ready in the system - verified through "top | grep udpxy"). It's OK. That should work properly. But now that the Standby mode is activated, the Udpxy process will not stop and run continuously.
I have the impression that the "top" command shows stupidity. Process states (R, S, etc.) are very strange.
I even think that DebugLOG also shows unnecessary. Ignored errors that, as they do not impede Enigma, are ignored by developers. Recording DebugLOG about random errors such as EPG-cache or HDMI-CEC absolutely does not necessarily mean the cause of the failed Standby mode.
I mentioned above the possible causes of Standby.py, in the new "power modes" (ActionMap.py or "StandbyActions"). In my opinion, the bug will be somewhere there. These new "power modes" are, in my opinion, not correctly implemented in Enigma 2. Also, the date of adding "power modes" would fit with the start of Standby mode problems.
Enigma2 does not have a sufficient number of debugging tools (related to system running).
I still can not find a bug in Enigma2, but I try it even though I am not an expert in Enigma2 systems. I still do not know exactly how Enigma2 goes into standby mode. Does the Enigma2 send the SIG for all processes under the "pause" or "stop" or "kill" processes?
Hallo,
ich wollte das neue 6.1/6.2 auch testen, hatte mich anfangs nicht getraut wegen diesen BUG.
Habe es schließlich doch gemacht - und siehe da - scheinbar habe ich auch dieses Tuner Problem. (hier war 5.1 noch drauf!!!)
Box im Stby - WEBIF Tuner B blieb "grün"
Habe dann nach dem die Gigablue quad plus in Stby ging das WEBIF im Firefox neu geladen - und die Tuner sind alle aus. im WEBIF.
Vielleicht ist das ja nur ein Problem das die Datenleitung nach Stby der Box sich nicht megr "refreshed".
Bitte nicht böse sein, bin nur Anfänger, kenne mich nicht gut aus.
Die User die das Problem haben ..
stöpselt alle USB-Geräte mal ab, alle Module raus, flasht ein frisches 6.1 Image ohne Wiederherstellung ( keine fremde Senderliste, keine Cams, keine Plugins, also richtig nackig )
jetzt die Tuner-Einstellungen vornehmen, wenn ihr empfang habt, macht bitte einen kompletten Neustart der Box.
Wenn ihr jetzt in den StandBy geht, wie sieht es dann aus ?
Today I installed the system again and again on a clean system, without installing anything that is the same. I started the FTA channel and turned off the VU. The head did not go to sleep.
Wysłane z mojego ONEPLUS A5010 przy użyciu Tapatalka
Hallo Leute,
also hab das akt. 6.1 installiert, nacktes Image, nur meine FBC Tuner konfiguriert.
Das gleiche wie im 6.2, im Standby sind alle Tuner aus
Gruß
apovis2105
I've flashed the latest OpenATV 6.1 (2017-12-28) on my FormulerF3 with the OpenMultiboot plug-in. After installing, I set up the tuners in the satellite box and uploaded my previous userbrouquets files ("Settings" folder). Finally, tuner shutdown works when the Standby mode is activated.
The Udpxy proxy server needed to watching DVB-IP (IPTV) was also successful. The localy Udpxy proxy server only serves to convert UDP -> HTTP protocol, due to the use of DVB-IP service. When the standby mode is activated, the Udpxy service stops correctly.
Now I have to set everything up again and check every change to see if it still works. So I can find out where the cause of the problem was in my case.
danke apovis2105, aber wie kommen wir weiter, also die von dem Problem betroffen sind?
Hilft eine Liste der laufenden Prozesse evtl. weiter? Oder eine Liste „opkg list-installed“, oder was auch immer?
Ich vermute, wie auch s3n0, dass das Problem im enigma2-Prozess steckt. djmarco hat ja auch schon mehrfach neu aufgesetzt, was sollen wir noch tun?!
@knocks & kanTiger, es ist kein „kosmetisches“ Problem. Nicht nur das WebIF zeigt uns, dass ein Tuner auch im Standby belegt ist sondern auch weitere Prozesse wie z.B. das Streamen oder OSC..ooups.