Thanks Thanks:  3
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 11
  1. #1
    Senior Mitglied
    Registriert seit
    03.03.2015
    Ort
    Bayern
    Beiträge
    128
    Total Downloaded
    20,50 MB
    Total Downloaded
    20,50 MB
    ReceiverDankeAktivitäten
    Box 1:
    Xpeed LX3
     
     
    Box 2:
    GM Triplex T2
     
     

    DM7080 Images booten nicht

    Hi,

    habe gerade das Image von heute geflasht, es bootete nicht durch und ein Bootlogo kam auch nicht.
    Beim Image vom 24.07. genau das Gleiche, ab wann das so ist, kann ich jetzt nicht sagen, das Image vom 18.07. läuft.
    Dachte schon, die Box wäre defekt...

    Bootlog:
    (openatv-5.3-dm7080-20160725.rootfs.tar.xz)
    Code:
    Dreambox DM7080
    
    M0
    M1
    
    SHMOO
    0
    00000000
    1
    00000000
    C
    do_boot
    
    .
    go
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.4-3.5-dm7080 (dm7080@opendreambox.org) (gcc version 4.8.1 (GCC) ) #26 SMP Tue Jul 12 13:09:27 UTC 2016
    [    0.000000] Fetching vars from bootloader... none present, using defaults.
    [    0.000000] Options: moca=0 sata=1 pcie=1 usb=1
    [    0.000000] Using 1024 MB + 1024 MB RAM (from CFE)
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
    [    0.000000] FPU revision is: 00130001
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 10000000 @ 00000000 (usable)
    [    0.000000]  memory: 30000000 @ 20000000 (usable)
    [    0.000000]  memory: 30000000 @ 90000000 (usable)
    [    0.000000] bmem: adding 512 MB RESERVED region at 512 MB (0x20000000@0x20000000)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone PFN ranges:
    [    0.000000]   Normal   0x00000000 -> 0x00050000
    [    0.000000]   HighMem  0x00050000 -> 0x000c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] Early memory PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00010000
    [    0.000000]     0: 0x00020000 -> 0x00050000
    [    0.000000]     0: 0x00090000 -> 0x000c0000
    [    0.000000] PERCPU: Embedded 7 pages/cpu @81e12000 s6784 r8192 d13696 u32768
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 452608
    [    0.000000] Kernel command ****: bmem=512M@512M memc1=768M console=ttyS0,1000000 root=/dev/mmcblk0p1 rootwait rootfstype=ext4
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, linesize 32 bytes.
    [    0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
    [    0.000000] Memory: 1287716k/1048576k available (5911k kernel code, 547292k reserved, 1224k data, 256k init, 786432k highmem)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000] NR_IRQS:160
    [    0.000000] Measuring MIPS counter frequency...
    [    0.000000] Detected MIPS clock frequency: 1407 MHz (175.877 MHz counter)
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] Calibrating delay loop... 935.93 BogoMIPS (lpj=467968)
    [    0.010000] pid_max: default: 32768 minimum: 301
    [    0.010000] Mount-cache hash table entries: 512
    [    0.011000] Initializing cgroup subsys cpuacct
    [    0.012000] Initializing cgroup subsys devices
    [    0.012000] Initializing cgroup subsys freezer
    [    0.013000] SMP: Booting CPU1...
    [    0.014000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    [    0.014000] Primary data cache 32kB, 4-way, linesize 32 bytes.
    [    0.014000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
    [    0.014000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
    [    0.014000] FPU revision is: 00130001
    [    0.024000] SMP: CPU1 is running
    [    0.024000] SMP: Booting CPU2...
    [    0.024000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    [    0.024000] Primary data cache 32kB, 4-way, linesize 32 bytes.
    [    0.024000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
    [    0.025000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
    [    0.025000] FPU revision is: 00130001
    [    0.034000] SMP: CPU2 is running
    [    0.034000] SMP: Booting CPU3...
    [    0.034000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    [    0.034000] Primary data cache 32kB, 4-way, linesize 32 bytes.
    [    0.034000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
    [    0.034000] CPU revision is: 00025b00 (Broadcom BMIPS5000)
    [    0.035000] FPU revision is: 00130001
    [    0.044000] SMP: CPU3 is running
    [    0.044000] Brought up 4 CPUs
    [    0.048000] devtmpfs: initialized
    [    0.051000] bmem: adding extra 256 MB RESERVED region at 3072 MB (0x10000000@0xc0000000)
    [    0.052000] NET: Registered protocol family 16
    [    0.053000] USB0: power enable is active high; overcurrent is active low
    [    0.053000] USB1: power enable is active high; overcurrent is active low
    [    0.054000] PCI: PCIe link up, 5.0Gbps x1
    [    0.057000] bio: create slab <bio-0> at 0
    [    0.058000] SCSI subsystem initialized
    [    0.059000] usbcore: registered new interface driver usbfs
    [    0.059000] usbcore: registered new interface driver hub
    [    0.060000] usbcore: registered new device driver usb
    [    0.060000] Advanced Linux Sound Architecture Driver Version 1.0.25.
    [    0.061000] PCI host bridge to bus 0000:00
    [    0.061000] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
    [    0.062000] pci_bus 0000:00: root bus resource [mem 0x00000400-0x000007ff]
    [    0.062000] PCI: found device 104c:8241 on PCIe bus, slot 0 (irq 36)
    [    0.063000] pci 0000:00:00.0: BAR 0: assigned [mem 0xd0000000-0xd000ffff 64bit]
    [    0.064000] pci 0000:00:00.0: BAR 2: assigned [mem 0xd0010000-0xd0011fff 64bit]
    [    0.065000] Bluetooth: Core ver 2.16
    [    0.065000] NET: Registered protocol family 31
    [    0.066000] Bluetooth: HCI device and connection manager initialized
    [    0.066000] Bluetooth: HCI socket layer initialized
    [    0.067000] Bluetooth: L2CAP socket layer initialized
    [    0.067000] Bluetooth: SCO socket layer initialized
    [    0.068000] cfg80211: Calling CRDA to update world regulatory domain
    [    0.069000] Switching to clocksource wktmr
    [    0.075000] NET: Registered protocol family 2
    [    0.083000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.084000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.088000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.090000] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.090000] TCP: reno registered
    [    0.091000] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.091000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.092000] NET: Registered protocol family 1
    [    0.093000] RPC: Registered named UNIX socket transport module.
    [    0.094000] RPC: Registered udp transport module.
    [    0.094000] RPC: Registered tcp transport module.
    [    0.095000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.096000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
    [    0.098000] highmem bounce pool size: 64 pages
    [    0.099000] NFS: Registering the id_resolver key type
    [    0.100000] SGI XFS with security attributes, large block/inode numbers, no debug enabled
    [    0.101000] msgmni has been set to 979
    [    0.103000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [    0.104000] io scheduler noop registered
    [    0.104000] io scheduler cfq registered (default)
    [    0.105000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.106000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 67) is a 16550A
    [    0.107000] console [ttyS0] enabled, bootconsole disabled
    [    0.107000] console [ttyS0] enabled, bootconsole disabled
    [    0.109000] loop: module loaded
    [    0.110000] ahci: SSS flag set, parallel bus scan disabled
    [    0.121000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.122000] ahci strict-ahci.0: flags: sntf stag clo slum part
    [    0.126000] scsi0 : ahci_platform
    [    0.127000] scsi1 : ahci_platform
    [    0.128000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 46
    [    0.128000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 46
    [    0.130000] tun: Universal TUN/TAP device driver, 1.6
    [    0.130000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.423000] Found PHY at Address 3
    [    0.423000] bcmgenet: configuring instance #0 for external RGMII
    [    0.424000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.425000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [    0.425000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [    0.435000] ata1: SATA link down (SStatus 0 SControl 300)
    [    0.458000] ehci-brcm ehci-brcm.0: irq 71, io mem 0x10480300
    [    0.464000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [    0.465000] hub 1-0:1.0: USB hub found
    [    0.465000] hub 1-0:1.0: 1 port detected
    [    0.466000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    [    0.466000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    [    0.498000] ehci-brcm ehci-brcm.1: irq 72, io mem 0x10480500
    [    0.504000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    [    0.504000] hub 2-0:1.0: USB hub found
    [    0.505000] hub 2-0:1.0: 1 port detected
    [    0.506000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    [    0.506000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    [    0.538000] ehci-brcm ehci-brcm.2: irq 76, io mem 0x10490300
    [    0.544000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    [    0.544000] hub 3-0:1.0: USB hub found
    [    0.545000] hub 3-0:1.0: 1 port detected
    [    0.546000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    [    0.546000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    [    0.578000] ehci-brcm ehci-brcm.3: irq 77, io mem 0x10490500
    [    0.584000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    [    0.585000] hub 4-0:1.0: USB hub found
    [    0.585000] hub 4-0:1.0: 1 port detected
    [    0.586000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.586000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [    0.587000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    [    0.588000] ohci-brcm ohci-brcm.0: irq 73, io mem 0x10480400
    [    0.654000] hub 5-0:1.0: USB hub found
    [    0.654000] hub 5-0:1.0: 1 port detected
    [    0.655000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    [    0.656000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    [    0.656000] ohci-brcm ohci-brcm.1: irq 74, io mem 0x10480600
    [    0.722000] hub 6-0:1.0: USB hub found
    [    0.722000] hub 6-0:1.0: 1 port detected
    [    0.723000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    [    0.724000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    [    0.724000] ohci-brcm ohci-brcm.2: irq 78, io mem 0x10490400
    [    0.740000] ata2: SATA link down (SStatus 0 SControl 300)
    [    0.769000] usb 1-1: new high-speed USB device number 2 using ehci-brcm
    [    0.790000] hub 7-0:1.0: USB hub found
    [    0.790000] hub 7-0:1.0: 1 port detected
    [    0.791000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    [    0.792000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    [    0.792000] ohci-brcm ohci-brcm.3: irq 79, io mem 0x10490600
    [    0.858000] hub 8-0:1.0: USB hub found
    [    0.858000] hub 8-0:1.0: 1 port detected
    [    0.859000] xhci_hcd 0000:00:00.0: xHCI Host Controller
    [    0.860000] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 9
    [    0.861000] xhci switched power on polarity
    [    0.862000] hub 9-0:1.0: USB hub found
    [    0.862000] hub 9-0:1.0: 2 ports detected
    [    0.863000] xhci_hcd 0000:00:00.0: xHCI Host Controller
    [    0.863000] xhci_hcd 0000:00:00.0: new USB bus registered, assigned bus number 10
    [    0.865000] hub 10-0:1.0: USB hub found
    [    0.865000] hub 10-0:1.0: 2 ports detected
    [    0.866000] Initializing USB Mass Storage driver...
    [    0.866000] usbcore: registered new interface driver usb-storage
    [    0.867000] USB Mass Storage support registered.
    [    0.868000] i2c /dev entries driver
    [    0.868000] lirc_dev: IR Remote Control driver registered, major 253
    [    0.869000] usbcore: registered new interface driver btusb
    [    0.870000] sdhci: Secure Digital Host Controller Interface driver
    [    0.870000] sdhci: Copyright(c) Pierre Ossman
    [    0.871000] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
    [    0.877000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
    [    0.877000] sdhci-brcmstb sdhci-brcmstb.1: Enabling controller
    [    0.883000] mmc1: SDHCI controller on sdhci-brcmstb.1 [sdhci-brcmstb.1] using ADMA
    [    0.884000] TCP: cubic registered
    [    0.885000] NET: Registered protocol family 10
    [    0.885000] hub 1-1:1.0: USB hub found
    [    0.885000] hub 1-1:1.0: 4 ports detected
    [    0.887000] NET: Registered protocol family 17
    [    0.887000] Bluetooth: RFCOMM TTY layer initialized
    [    0.888000] Bluetooth: RFCOMM socket layer initialized
    [    0.888000] Bluetooth: RFCOMM ver 1.11
    [    0.888000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.890000] Bluetooth: BNEP filters: protocol multicast
    [    0.890000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.891000] L2TP core driver, V2.0
    [    0.891000] Registering the dns_resolver key type
    [    0.892000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [    0.893000] EBI CS0: setting up SPI flash (primary)
    [    0.894000] spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    [    0.895000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    [    0.896000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
    [    0.897000] Creating 3 MTD partitions on "spi0.0":
    [    0.897000] 0x000000000000-0x000001000000 : "entire_device"
    [    0.898000] 0x000000000000-0x000000100000 : "bootloader"
    [    0.899000] 0x000000100000-0x000001000000 : "recovery"
    [    0.901000] ALSA device list:
    [    0.901000]   No soundcards found.
    [    0.902000] Waiting for root device /dev/mmcblk0p1...
    [    0.984000] mmc0: new high speed MMC card at address 0001
    [    0.985000] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
    [    0.986000] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
    [    0.987000] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
    [    0.990000] usb 3-1: new high-speed USB device number 2 using ehci-brcm
    [    0.993000]  mmcblk0: p1 p2
    [    0.994000]  mmcblk0boot1: unknown partition table
    [    0.996000]  mmcblk0boot0: unknown partition table
    [    1.012000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
    [    1.013000] VFS: Mounted root (ext4 filesystem) on device 179:1.
    [    1.020000] devtmpfs: mounted
    INIT: version 2.88 booting
    [    1.680000] stb_core: module license 'Proprietary' taints kernel.
    [    1.681000] Disabling lock debugging due to kernel taint
    [    1.755000] stv0299: exports duplicate symbol stv0299_attach (owned by kernel)
    [    1.846000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    1.848000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    1.869000] input: dreambox ir keyboard as /devices/virtual/input/input2
    [    1.871000] input: dreambox ir mouse as /devices/virtual/input/input3
    [    1.943000] stv0299: exports duplicate symbol stv0299_attach (owned by kernel)
    [    1.970000] 0 ms:
    [    2.160000] 189 ms: 9
    /dev/dvb/adapter0/video0: No such file or directory
    [    2.174000] 14 ms: 11
    [    2.245000] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
    [    2.250000] 75 ms: 12
    [    2.259000] 8 ms: 14
    [    2.482000] 223 ms: 15
    [    2.492000] 9 ms: 17
    [    3.223000] 731 ms: 18
    [    3.244000] 21 ms: 20
    [    3.259000] 15 ms: 22
    [    3.286000] 27 ms: 23
    ALSA: Restoring mixer settings...
    [    3.303000] 16 ms: 25
    [    3.336000] 32 ms: 26
    /usr/sbin/alsactl: load_state:1735: No soundcards found...
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    [    4.012000] 676 ms: 28
    Starting tpmd.
    [    4.028000] 16 ms: 29
    Running postinst /etc/ipk-postinsts/000-ntpdate...
    update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
     Removing any system startup links for run-postinsts ...
      /etc/rcS.d/S99run-postinsts
    [    4.136000] 108 ms: 31
    INIT: Entering runlevel: 3
    Configuring network interfaces... [    4.314000] ADDRCONF(NETDEV_UP): eth0: link is not ready
    udhcpc (v1.24.1) started
    Sending discover...
    [    5.416000] bcmgenet bcmgenet.0: eth0: link up, 1000 Mbps, full duplex
    [    5.417000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Sending discover...
    Sending select for 192.168.178.34...
    Lease of 192.168.178.34 obtained, lease time 8640000
    /etc/udhcpc.d/50default: Adding DNS 192.168.178.1
    done.
    [    7.538000] 3402 ms: 33
    Starting system message bus: dbus.
    [    7.625000] 87 ms: 33
    Starting Dropbear SSH server: Generating key, this may take a while...
    /etc/network/if-up.d/ntpdate-sync: **** 45: hwclock: command not found
    Public key portion is:
    ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDUjIrB5YsY2SBHzeX7lyrrP0kI6MtDxKTvU+8GxVlfuAFRQ9hppTGtLqziqwEA2Od0QfEQch3IfcFP6xT+XlIJ7+M+AthpAYZhXjL0eXTdRz1cvoXcsYbJB+31tp6/S2XnhocUhu1SVX+2sDDwau/Ndk7+MA0lvUjDIZPghbZgp9AMgdPWB6vZO9/VGMoeCG3npK/nPeWqMsJXPl1whbLv3AtLahI2dQ9T71Qj3gYV5s0leJGRL1hB95EIEwwLz02paosvIgn4J6HfEImNjO6mddBqRbRI6LIsoPCbTY7gwnHRczdKKo8QubFWwWOPTm1UaXRTV+6pS9OHY0T7falF root@dm7080
    Fingerprint: md5 33:51:3a:3b:33:ed:8f:d0:5e:c8:f1:d1:e3:eb:9d:8f
    dropbear.
    [   18.369000] 10744 ms: 34
    Starting automount: done.
    [   19.489000] 1119 ms: 35
    Starting rpcbind daemon...done.
    [   19.526000] 37 ms: 36
    NFS daemon support not enabled in kernel
    [   19.551000] 25 ms: 37
    Mounting remote filesystems...
    [   19.558000] 7 ms: 38
    creating NFS state directory: done
    starting statd: done
    [   19.651000] 93 ms: 39
    starting Busybox Periodic Command Scheduler: crond... done.
    [   19.665000] 14 ms: 40
    crond[778]: crond (busybox 1.24.1) started, log level 8
    
    Loading fuse module.
    Fuse control filesystem already available.
    [   19.694000] 29 ms: 41
    Starting internet superserver: inetd.
    [   19.710000] 15 ms: 42
    Starting Samba: smbd nmbd.
    [   19.923000] 212 ms: 43
    Starting syslogd/klogd: done
    [   19.958000] 34 ms: 44
    Starting telnet server: telnetd.
    [   19.976000] 17 ms: 44
    * starting FTP Server: vsftpd... done.
    [   19.997000] 21 ms: 45
     * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
       ...done.
    [   20.076000] 79 ms: 46
    [   20.331000] ------------[ cut here ]------------
    [   20.332000] WARNING: at generic.c:586 proc_register+0x220/0x2cc()
    [   20.333000] proc_dir_entry 'stb/lcd' already registered
    [   20.333000] Modules linked in: tft_dm7080(O+) boxmodel(PO) fp_hwmon(O) si2169c(PO) si2166b(PO) dreambox_keyboard(PO) dreambox_rc2(PO) cu1216mk3(PO) alps_bsbe1_c01a(PO) bcm4506(PO) bcm4501(PO) alps_bsbe2(PO) lcd(PO) cxd1981(PO) tu1216(O) lnb_ctrl(PO) stb_core(PO)
    [   20.336000] Call Trace:
    [   20.336000] [<805bba70>] dump_stack+0x8/0x34
    [   20.337000] [<80023abc>] warn_slowpath_common+0x78/0xa4
    [   20.338000] [<80023b14>] warn_slowpath_fmt+0x2c/0x38
    [   20.338000] [<80133834>] proc_register+0x220/0x2cc
    [   20.339000] [<80133c50>] proc_mkdir_mode+0x40/0x6c
    [   20.339000] [<e02782b0>] init_module+0x38/0x204 [tft_dm7080]
    [   20.340000] [<80001574>] do_one_initcall+0x164/0x1f0
    [   20.341000] [<8007a5fc>] sys_init_module+0x110c/0x1e28
    [   20.341000] [<8000dae8>] stack_done+0x20/0x44
    [   20.342000]
    [   20.342000] ---[ end trace 9cde8a4a8a977dcb ]---
    [   20.351000] 275 ms: 47
    [   20.356000] 5 ms: 48
    grep: /etc/enigma2/settings: No such file or directory
    grep: /etc/enigma2/settings: No such file or directory
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   872 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    enigma2 is the main pvr application... adjust oom score!
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   889 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   905 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   920 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   936 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    enigma2 is the main pvr application... adjust oom score!
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   951 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    enigma2 is the main pvr application... adjust oom score!
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   967 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    enigma2 is the main pvr application... adjust oom score!
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:   983 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    enigma2 is the main pvr application... adjust oom score!
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:  1000 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    /dev/dvb/adapter0/video0: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    enigma2 is the main pvr application... adjust oom score!
    /usr/bin/enigma2.sh: **** 88: /proc//oom_adj: No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 4
    framebuffer not available.
    /usr/bin/enigma2.sh: **** 108:  1017 Segmentation fault      LD_PRELOAD=$LIBS /usr/bin/enigma2 2> /dev/null
    INIT: Id "gui" respawning too fast: disabled for 5 minutes
    INIT: no more processes left in this runlevel
    enigma2 is the main pvr application... adjust oom score!
    /usr/bin/enigma2.sh: **** 88: /proc//oom_adj: No such file or directory
    enigma2 is the main pvr application... adjust oom score!
    /usr/bin/enigma2.sh: **** 88: /proc//oom_adj: No such file or directory
    enigma2 is the main pvr application... adjust oom score!
    /usr/bin/enigma2.sh: **** 88: /proc//oom_adj: No such file or directory
    enigma2 is the main pvr application... adjust oom score!
    /usr/bin/enigma2.sh: **** 88: /proc//oom_adj: No such file or directory
    Flash-Log:
    (openatv-5.3-dm7080-20160724.rootfs.tar.xz)
    Code:
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    60928 inodes, 243712 blocks
    12185 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=251658240
    8 block groups
    32768 blocks per group, 32768 fragments per group
    7616 inodes per group
    Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376
    
    Allocating group tables: 0/8   done                            
    Writing inode tables: 0/8   done                            
    Creating journal (4096 blocks): done
    Writing superblocks and filesystem accounting information: 0/8   done[*] Mounting root filesystem[*] Extracting '/tmp/n5ielk' to '/mnt'[*] Writing /usr/share/dreambox-secondstage/ssbl.bin to /dev/mmcblk0 (LBA: 8192)
    1035+1 records in
    1035+1 records out
    530316 bytes (517.9KB) copied, 1.417812 seconds, 365.3KB/s
    Fatal: Cannot access '/usr/share/fastboot/lcd_anim.bin'
    Fatal: Failed to run kernel-image.postinst[*] Unmounting '/mnt'
    umount: can't umount /mnt: Device or resource busy
    MfG
    SML

    GI-Xpeed LX3 | GM Triplex T2
    MS: Spaun SMS 9807 für Astra / Hotbird

    Kathrein CAS90 45E-45W

    •   Alt Advertising

       

  2. #2
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.910
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    wird irgend was nicht ok sein nach der dm520 integration muss ich schauen die tage


    openATV we are open Source

    Boykott GPL violator

  3. Thanks SML bedankten sich
  4. #3
    Senior Mitglied
    Registriert seit
    03.03.2015
    Ort
    Bayern
    Beiträge
    128
    Themenstarter
    Total Downloaded
    20,50 MB
    Total Downloaded
    20,50 MB
    ReceiverDankeAktivitäten
    Box 1:
    Xpeed LX3
     
     
    Box 2:
    GM Triplex T2
     
     
    Gibt ja noch genügend alternativen, wollte es nur mitteilen.
    MfG
    SML

    GI-Xpeed LX3 | GM Triplex T2
    MS: Spaun SMS 9807 für Astra / Hotbird

    Kathrein CAS90 45E-45W

  5. #4
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.910
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    so dein fehler:

    Linux version 3.4-3.5-dm7080 (dm7080@opendreambox.org) (gcc version 4.8.1 (GCC)
    du hast kein atv installiert dein kernel sagt das ist ein dm oe 2.2 kernel nicht von uns das kann nicht gehen

    DM7080 Images booten nicht-dm7080.jpg

    weil bei mir geht es

    mix da keine sachen oder irgend was das wird nichts

    so siehts bei uns aus die kernel meldung

    root@dm7080:~# cat /proc/version
    Linux version 3.4-3.5-dm7080 (oe1@build4) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Mar 26 23:03:18 CET 2016
    root@dm7080:~#


    openATV we are open Source

    Boykott GPL violator

  6. #5
    Senior Mitglied
    Registriert seit
    03.03.2015
    Ort
    Bayern
    Beiträge
    128
    Themenstarter
    Total Downloaded
    20,50 MB
    Total Downloaded
    20,50 MB
    ReceiverDankeAktivitäten
    Box 1:
    Xpeed LX3
     
     
    Box 2:
    GM Triplex T2
     
     
    Ich habe nichts gemixt, habe mehrfach geflasht, das ältere Image lief sofort ganz normal.

    Was soll ich da mixen, ich flashe das Image ganz normal über den Rescue-Loader, da kann ich nichts falsch machen.

    Am Image (Archiv) habe ich ganz bestimmt nichts geändert.
    MfG
    SML

    GI-Xpeed LX3 | GM Triplex T2
    MS: Spaun SMS 9807 für Astra / Hotbird

    Kathrein CAS90 45E-45W

  7. #6
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.910
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    wenn über das webif am pc das machts ist ok

    wenn mit dbackup must in den einstellungen noch sagen mit kernel aus dem image !


    openATV we are open Source

    Boykott GPL violator

  8. #7
    Senior Mitglied
    Registriert seit
    03.03.2015
    Ort
    Bayern
    Beiträge
    128
    Themenstarter
    Total Downloaded
    20,50 MB
    Total Downloaded
    20,50 MB
    ReceiverDankeAktivitäten
    Box 1:
    Xpeed LX3
     
     
    Box 2:
    GM Triplex T2
     
     
    wenn über das webif am pc das machts ist ok
    Ich flashe nur über das Webif, dbackup hatte ich bis jetzt noch nie verwendet, die Flash-Log Datei ist ja vom Rescue-Loader und da kam es ja schon zu einem Fehler.
    Wie gesagt, die beiden Images vom 24.07. und 25.07. liefen nicht, hatte mindestens 3x hintereinander geflasht.

    Zuvor war zwar ein OE2.2 drauf (hatte das u.a. wegen lcd4linux getestet), das sollte aber keine Rolle spielen.

    Edit:
    Habe gerade das Image vom 25.07. über das Image vom 18.07. per Webif geflasht.
    Das Image bootet jetzt, im Flash-Log sind aber Frehler drin:
    Code:
    Fatal: Cannot access '/usr/share/fastboot/lcd_anim.bin'
    Fatal: Failed to run kernel-image.postinst[*] Unmounting '/mnt'
    umount: can't umount /mnt: Device or resource busy

    Flash-Log - ohne Fehler:
    (openatv-5.3-dm7080-20160718.rootfs.tar.xz)

    Code:
    [*] Creating ext4 filesystem 'dreambox-rootfs' on /dev/mmcblk0p1
    mke2fs 1.42.8 (20-Jun-2013)
    Filesystem label=dreambox-rootfs
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    60928 inodes, 243712 blocks
    12185 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=251658240
    8 block groups
    32768 blocks per group, 32768 fragments per group
    7616 inodes per group
    Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376
    
    Allocating group tables: 0/8   done                            
    Writing inode tables: 0/8   done                            
    Creating journal (4096 blocks): done
    Writing superblocks and filesystem accounting information: 0/8   done[*] Mounting root filesystem[*] Extracting '/tmp/fVzZN9' to '/mnt'
    1035+1 records in
    1035+1 records out
    530316 bytes (517.9KB) copied, 2.166478 seconds, 239.0KB/s
    16753+0 records in
    16753+0 records out
    8577536 bytes (8.2MB) copied, 20.587765 seconds, 406.9KB/s
    0+1 records in
    0+1 records out
    5 bytes (5B) copied, 0.001695 seconds, 2.9KB/s
    Unmounting '/mnt/dev'
    Unmounting '/mnt/proc'
    Unmounting '/mnt/run'
    Unmounting '/mnt/sys'
    Unmounting '/mnt/tmp'
    Unmounting '/mnt'
    Finished successfully.
    You may reboot now.

    Edit 2:
    So, jetzt habe ich es nochmal nachgestellt, der Fehler liegt definitiv an den Images.

    Die Images laufen, wenn Du über ein openATV Image flashst, wenn aber z.B. das Original-Image auf der Box war, dann ist es so, wie ich in #1 geschrieben habe.
    Irgendwas wird wohl beim Flashen nicht gelöscht/überschrieben.
    Geändert von SML (27.07.2016 um 07:34 Uhr)
    MfG
    SML

    GI-Xpeed LX3 | GM Triplex T2
    MS: Spaun SMS 9807 für Astra / Hotbird

    Kathrein CAS90 45E-45W

  9. #8
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.910
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    ok mit der meldung kann ich was anfangen ich schau mal wo das file hergekommen ist und warum es nun weg ist


    openATV we are open Source

    Boykott GPL violator

  10. #9
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.910
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    bitte mit dem Image von heute testen


    openATV we are open Source

    Boykott GPL violator

  11. Thanks SML bedankten sich
  12. #10
    Senior Mitglied
    Registriert seit
    03.03.2015
    Ort
    Bayern
    Beiträge
    128
    Themenstarter
    Total Downloaded
    20,50 MB
    Total Downloaded
    20,50 MB
    ReceiverDankeAktivitäten
    Box 1:
    Xpeed LX3
     
     
    Box 2:
    GM Triplex T2
     
     
    Hi,

    Image von heute läuft wieder einwandfrei, Danke!

    Darf man fragen, was die Ursache war?
    MfG
    SML

    GI-Xpeed LX3 | GM Triplex T2
    MS: Spaun SMS 9807 für Astra / Hotbird

    Kathrein CAS90 45E-45W


Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 05:44 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 10,53%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com