Thanks Thanks:  1
Ergebnis 1 bis 8 von 8
  1. #1
    Anfänger
    Registriert seit
    20.05.2015
    Beiträge
    13
    Total Downloaded
    20,45 MB
    Total Downloaded
    20,45 MB
    ReceiverDankeAktivitäten

    TV- und Radio-Tasten

    Hallo,
    ein kleines Problem: wenn man beim TV-Schauen die TV-Taste drückt, oder beim Radio-Hören die Radio-Taste, schmiert 5.1.ab. Ich weiß, das Vorgehen ist nicht besonders intelligent, aber der Nachwuchs spielt halt auch mal mit der FB. Wäre schön, wenn dies bei nächster Gelegenheit abgestellt würde. Danke.
    Gruß
    WK_HK

    •   Alt Advertising

       

  2. #2
    Avatar von sumpfhuhn0
    Registriert seit
    02.12.2013
    Ort
    NRW
    Beiträge
    874
    Total Downloaded
    814,79 MB
    Total Downloaded
    814,79 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue UHD Quad 4K
     
     
    Welche Box hast du denn?
    Was hast du im OSD eingestellt?
    TV- und Radio-Tasten-radio2.jpg
    Gruß. sumpfhuhn0


    Xtrend ET-8500 4x DVB-S2, 1TB HDD, openATV 5.1
    Mut@nt HD2400 2x DVB-S2, 2TB HDD, openATV 5.1
    WWIO Bre2ze 1x DVB-S2, openATV 5.1
    Edison OS mini
    1x DVB-S2 ATV 5.1
    MK Digital Multischalter zur Verteilung von 8 SAT-ZF-Ebenen
    12 Teilnehmer ASTRA+Hotbird


  3. #3
    Anfänger
    Registriert seit
    20.05.2015
    Beiträge
    13
    Themenstarter
    Total Downloaded
    20,45 MB
    Total Downloaded
    20,45 MB
    ReceiverDankeAktivitäten
    Die Box ist eine VU+ duo2, ALternativer Radio-Modus steht auf "nein". Ich finde aber, selbst wenn man noch so falsche Parameter eingibt, abschmieren dürfte die Box nie.

  4. #4
    Avatar von sumpfhuhn0
    Registriert seit
    02.12.2013
    Ort
    NRW
    Beiträge
    874
    Total Downloaded
    814,79 MB
    Total Downloaded
    814,79 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue UHD Quad 4K
     
     
    Ist im Moment leider so. Es wird daran gearbeitet.
    Stell bitte solange den Alternativen Radio-Modus auf "ja"
    Gruß. sumpfhuhn0


    Xtrend ET-8500 4x DVB-S2, 1TB HDD, openATV 5.1
    Mut@nt HD2400 2x DVB-S2, 2TB HDD, openATV 5.1
    WWIO Bre2ze 1x DVB-S2, openATV 5.1
    Edison OS mini
    1x DVB-S2 ATV 5.1
    MK Digital Multischalter zur Verteilung von 8 SAT-ZF-Ebenen
    12 Teilnehmer ASTRA+Hotbird


  5. Thanks wk_hk bedankten sich
  6. #5
    Anfänger
    Registriert seit
    20.05.2015
    Beiträge
    13
    Themenstarter
    Total Downloaded
    20,45 MB
    Total Downloaded
    20,45 MB
    ReceiverDankeAktivitäten
    Hallo Sumpfhhn0,

    danke für die Bemühungen, aber leider... TV-Taste drücken bei TV-Sehen funzt immer noch nicht, heißt die Box (VU+ duo2) schmiert immer noch ab.

    Mein LOG-File:

    Code:
    <?xml version="1.0" encoding="utf-8"?>
    <openATV>
        <enigma2>
            <crashdate>Mi Aug 26 14:23:00 2015</crashdate>
            <compiledate>Aug 26 2015</compiledate>
            <contactemail>vali@dreambox-tools.info</contactemail>
            <!-- Please email this crashlog to above address -->
            <skin>YADS-HD/skin.xml</skin>
            <sourcedate>2015-08-25</sourcedate>
            <version>3.0.0</version>
        </enigma2>
        <image>
            <stbmodel>duo2</stbmodel>
            <kernelversion>
                <![CDATA[
    Linux vuduo2 3.13.5 #1 SMP Fri Aug 7 10:01:57 CEST 2015 mips GNU/Linux
    ]]>
            </kernelversion>
            <kernelcmdline>libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
            <nimsockets>NIM Socket 0:</nimsockets>
            <imageversion>
                <![CDATA[
    box_type=vuduo2
    build_type=0
    version=5.1
    build=0
    date=20150813054942
    comment=openATV
    target=9
    creator=openATV
    url=http://www.opena.tv
    catalog=http://www.opena.tv
    ]]>
            </imageversion>
            <imageissue>
                <![CDATA[
    Welcome to openATV for %h
    openatv 5.1 %h
    
    ]]>
            </imageissue>
        </image>
        <crashlogs>
            <enigma2crashlog>
                <![CDATA[
    67, apid=768
    DMX_SET_PES_FILTER(0x2ff) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x300) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(1) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 0 - ok
    DMX_SET_PES_FILTER(0x2ff) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x23) - ttx - ok
    DEMUX_START - ttx - ok
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    disable teletext subtitles page ffffffffffffffff (und)
    setPixmapNum(0) failed! defined pixmaps: []
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:1:308:5:85:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:1:308:5:85:C00000:0:0:0:
    RemovePopup, id = ZapError
    PATready
    use pmtpid 0063 for service_id 0308
    [SEC] set dynamic current limiting
    eventNewProgramInfo 0 0
    have 1 video stream(s) (02ff), and 1 audio stream(s) (0300), and the pcr pid is 02ff, and the text pid is 0023
    decoder state: play, vpid=767, apid=768
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    VIDEO_GET_EVENT - ok
    [eDVBLocalTimerHandler] diff is 1
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] set RTC Time
    [eDVBLocalTimerHandler] update RTC
    [eDVBLocalTimerHandler] time update to 14:22:30
    [eDVBLocalTimerHandler] m_time_difference is 1
    [eDVBLocalTimerHandler] set Linux Time
    [Dish] tuning failed
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    AITready
    [EPGC] start caching events(1440591751)
    Name  : SIXX
    URL   : http://hbbtv.sixx.de/service/redbutton_sixx.php
    OrgID : 96
    AppID : 16385
    Control Code : 1
    Profile Code : 0
    
    OCready
    sdt update done!
    1 2 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:34.204251
    0 2 1
    1 2 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:35.464492
    0 2 1
    [EPGC] abort non avail netmed schedule reading
    [EPGC] abort non avail netmed schedule other reading
    [EPGC] abort non avail FreeSat schedule_other reading
    [EPGC] abort non avail viasat reading
    [EPGC] nownext finished(1440591758)
    1 179 1
    KEY: 377 0 KEY_TV TV 2015-08-26 14:22:39.855412
    action ->  EasyInfoActions tv_but
    playing 1:0:1:445C:453:1:C00000:0:0:0:
    [eDVBCAService] free slot 0 demux 0 for service 1:0:1:308:5:85:C00000:0:0:0:
    [eDVBCAService] free service 1:0:1:308:5:85:C00000:0:0:0:
    getResolvedKey config.usage.remote_fallback failed !! (Typo??)
    [SCREENNAME]  InfoBar
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 0453:0001
    available channel.. 0005:0085
    opening frontend 1
    (1)tune
    [36m[1m[prepare] [0m[33mUnicable (EN50494)[0m
    [36m[1m[prepareSTelectronicSatCR] [0m[33mpolarisation: H [0m[33mband: H [0m[33mposition: 0 [0m[33msatcr: 6 [0m[33mtunerfreq: 1979MHz [0m[33mvco: 3924MHz [0m[36mtuningword 0xce77[0m
    [36m[1m[prepare] [0m[33mtunetimeout 5945ms[0m
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1979 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
    allocate demux
    [SKIN] processing screen ChannelSelection_summary:
    [SCREENNAME]  ['ChannelSelection_summary', 'SimpleSummary']
    [SCREENNAME]  ChannelSelection
    decoder state: play, vpid=-1, apid=-1
    DEMUX_STOP - pcr - ok
    DEMUX_STOP - video - ok
    VIDEO_STOP - ok
    AUDIO_STOP - ok
    DEMUX_STOP - audio - ok
    AUDIO_CONTINUE - ok
    DEMUX_STOP - ttx - ok
    [eDVBLocalTimerHandler] remove channel 0x1b634d8
    [eEPGCache] remove channel 0x1b634d8
    [EPGC] abort caching events !!
    0 179 1
    KEY: 377 1 KEY_TV TV 2015-08-26 14:22:40.256113
    [SEC] set static current limiting
    [SCREENNAME]  UnhandledKey
    [SEC] invalidate current switch params
    [SEC] setVoltage 1
    [SEC] sleep 200ms
    [SEC] setVoltage 2
    [SEC] setTone 0
    [SEC] sleep 75ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    [SEC] sendDiseqc: e0105ace77(?)
    [SEC] sleep 100ms
    [SEC] setVoltage 1
    [SEC] update current switch params
    [SEC] startTuneTimeout 5945
    [SEC] setFrontend 1
    setting frontend 1
    (1)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    [SEC] set dynamic current limiting
    [DVBCAHandler] no more services
    (1)fe event: status 1f, inversion on, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x1d29dd0 running
    [eEPGCache] channel 0x1d29dd0 running
    [EPGC] next update in 41 min
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
    allocate demux
    decoder state: play, vpid=255, apid=259
    DMX_SET_PES_FILTER(0xff) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x103) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(0) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux1
    VIDEO_SET_STREAMTYPE 0 - ok
    DMX_SET_PES_FILTER(0xff) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x20) - ttx - ok
    DEMUX_START - ttx - ok
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    disable teletext subtitles page ffffffffffffffff (und)
    setPixmapNum(0) failed! defined pixmaps: []
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
    [eDVBCAService] add demux 1 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
    RemovePopup, id = ZapError
    1 160 1
    KEY: 352 0 KEY_OK OK 2015-08-26 14:22:42.548894
    action ->  OkCancelActions ok
    PATready
    use pmtpid 0060 for service_id 445c
    eventNewProgramInfo 0 0
    have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
    decoder state: play, vpid=255, apid=259
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    [eDVBCAService] don't build/send the same CA PMT twice
    0 160 1
    KEY: 352 1 KEY_OK OK 2015-08-26 14:22:42.821922
    action ->  OkCancelActions OK
    unknown action OkCancelActions/OK! typo in keymap?
    action ->  OkCancelActions OK
    unknown action OkCancelActions/OK! typo in keymap?
    [eDVBLocalTimerHandler] diff is 1
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] set RTC Time
    [eDVBLocalTimerHandler] update RTC
    [eDVBLocalTimerHandler] time update to 14:22:43
    [eDVBLocalTimerHandler] m_time_difference is 1
    [eDVBLocalTimerHandler] set Linux Time
    [Dish] tuning failed
    close frontend 0
    [turnOffSatCR] running mainloop
    [SEC] setVoltage 1
    [SEC] sleep 200ms
    sdt update done!
    [SEC] setVoltage 4
    [SEC] setTone 0
    [SEC] sleep 75ms
    AITready
    Name  : Sat_1
    URL   : http://hbbtv.sat1.de/service/redbutton_s1.php
    OrgID : 96
    AppID : 1
    Control Code : 1
    Profile Code : 0
    
    [SEC] sendDiseqc: e0105ae000(?)
    1 160 1
    KEY: 352 0 KEY_OK OK 2015-08-26 14:22:44.615234
    action ->  OkCancelActions ok
    playing 1:0:19:283D:3FB:1:C00000:0:0:0:
    [eDVBCAService] free slot 0 demux 1 for service 1:0:1:445C:453:1:C00000:0:0:0:
    [eDVBCAService] free service 1:0:1:445C:453:1:C00000:0:0:0:
    decoder state: play, vpid=-1, apid=-1
    DEMUX_STOP - pcr - ok
    DEMUX_STOP - video - ok
    VIDEO_STOP - ok
    AUDIO_STOP - ok
    DEMUX_STOP - audio - ok
    AUDIO_CONTINUE - ok
    DEMUX_STOP - ttx - ok
    start release channel timer
    getResolvedKey config.usage.remote_fallback failed !! (Typo??)
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    [eDVBLocalTimerHandler] remove channel 0x1d29dd0
    [eEPGCache] remove channel 0x1d29dd0
    allocate channel.. 03fb:0001
    (0)tune
    [36m[1m[prepare] [0m[33mUnicable (EN50494)[0m
    [36m[1m[prepareSTelectronicSatCR] [0m[33mpolarisation: H [0m[33mband: L [0m[33mposition: 0 [0m[33msatcr: 7 [0m[33mtunerfreq: 2096MHz [0m[33mvco: 3840MHz [0m[36mtuningword 0xea62[0m
    [36m[1m[prepare] [0m[33mtunetimeout 5160ms[0m
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 2096 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
    allocate demux
    RemovePopup, id = Parental control
    0 160 1
    KEY: 352 1 KEY_OK OK 2015-08-26 14:22:44.741512
    action ->  OkCancelActions OK
    unknown action OkCancelActions/OK! typo in keymap?
    action ->  OkCancelActions OK
    unknown action OkCancelActions/OK! typo in keymap?
    1 160 1
    KEY: 352 0 KEY_OK OK 2015-08-26 14:22:44.744173
    action ->  OkCancelActions ok
    [SCREENNAME]  InfoBarSummary
    0 160 1
    KEY: 352 1 KEY_OK OK 2015-08-26 14:22:44.772181
    [SEC] set static current limiting
    [SCREENNAME]  InfoBar
    [SCREENNAME]  InfoBar
    [SEC] invalidate current switch params
    set sequence pos 3
    [SEC] setVoltage 2
    [SEC] setTone 0
    [SEC] sleep 75ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    [SEC] sendDiseqc: e0105aea62(?)
    [SEC] sleep 100ms
    [SEC] setVoltage 1
    [SEC] update current switch params
    [SEC] startTuneTimeout 5160
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1f, inversion on, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x1b634d8 running
    [eEPGCache] channel 0x1b634d8 running
    [EPGC] next update in 32 min
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (13ed), and 1 audio stream(s) (13f2), and the pcr pid is 13ed, and the text pid is 13f0
    allocate demux
    decoder state: play, vpid=5101, apid=5106
    DMX_SET_PES_FILTER(0x13ed) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x13f2) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(0) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 1 - ok
    DMX_SET_PES_FILTER(0x13ed) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x13f0) - ttx - ok
    DEMUX_START - ttx - ok
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    disable teletext subtitles page ffffffffffffffff (und)
    setPixmapNum(0) failed! defined pixmaps: []
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
    RemovePopup, id = ZapError
    [eDVBLocalTimerHandler] diff is -1
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] set RTC Time
    [eDVBLocalTimerHandler] update RTC
    [eDVBLocalTimerHandler] time update to 14:22:45
    [eDVBLocalTimerHandler] m_time_difference is -1
    [eDVBLocalTimerHandler] set Linux Time
    [SEC] set dynamic current limiting
    PATready
    use pmtpid 13ec for service_id 283d
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    eventNewProgramInfo 0 0
    dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
    Rds PID 13f4 detected ? ! ?
    have 1 video stream(s) (13ed), and 3 audio stream(s) (13ee, 13ef, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
    decoder state: play, vpid=5101, apid=5106
    dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
    Rds PID 13f4 detected ? ! ?
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    poll: unhandled POLLERR/HUP/NVAL for fd 97(16)
    [Dish] tuning failed
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    close frontend 1
    [turnOffSatCR] running mainloop
    [SEC] setVoltage 1
    [SEC] sleep 200ms
    AITready
    Name  : HBBTV Das Erste Check Eins
    URL   : http://hbbtv.daserste.de/?checkeins=1
    OrgID : 19
    AppID : 66
    Control Code : 2
    Profile Code : 0
    
    Name  : HBBTV-Start-DSMCC+Web
    URL   : http://itv.ard.de/ardstart/index.html
    OrgID : 19
    AppID : 1
    Control Code : 1
    Profile Code : 0
    
    Name  : EPG
    URL   : http://itv.ard.de/ardepg/index.php
    OrgID : 19
    AppID : 2
    Control Code : 2
    Profile Code : 0
    
    Name  : ARD-Text-DSMCC
    URL   : ARD Text Vollbild - Startseite
    OrgID : 19
    AppID : 4
    Control Code : 2
    Profile Code : 0
    
    Name  : Tagesschau
    URL   : http://www.tagesschau.de/hbbtv
    OrgID : 19
    AppID : 5
    Control Code : 2
    Profile Code : 0
    
    Name  : Mediathek DasErste
    URL   : http://hbbtv.daserste.de/index.php
    OrgID : 19
    AppID : 20
    Control Code : 2
    Profile Code : 0
    
    Name  : HBBTV NDR-Mediathek
    URL   : NDR HbbTV Mediathek
    OrgID : 19
    AppID : 27
    Control Code : 2
    Profile Code : 0
    
    Name  : HBBTV ARD-Mediathek
    URL   : http://hbbtv.ardmediathek.de/hbbtv-a...icegroup=hbbtv
    OrgID : 19
    AppID : 3
    Control Code : 2
    Profile Code : 0
    
    Name  : BR-Mediathek
    URL   : http://www.br-online.de/mediathek-video-hbbtv/br.php
    OrgID : 19
    AppID : 35
    Control Code : 2
    Profile Code : 0
    
    Name  : HBBTV Tatort
    URL   : http://hbbtv-tatort.daserste.de/index.php
    OrgID : 19
    AppID : 42
    Control Code : 2
    Profile Code : 0
    
    Name  : HbbTV SR Mediathek
    URL   : http://hbbtv.sr-mediathek.de/index.php
    OrgID : 19
    AppID : 56
    Control Code : 2
    Profile Code : 0
    
    [SEC] setVoltage 4
    ERROR reading PES (fd=92) - Value too large for defined data type
    poll: unhandled POLLERR/HUP/NVAL for fd 92(8)
    (1)fe event: status 1f, inversion on, m_tuning 0
    sdt update done!
    [SEC] setTone 0
    [SEC] sleep 75ms
    [SEC] sendDiseqc: e0105ac000(?)
    [SEC] sleep 100ms
    [SEC] setVoltage 1
    [SEC] delayed close frontend
    close frontend 1
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 90
    [Volume Adjust] load xml...
    1 80 1
    KEY: 128 0 KEY_STOP STOP 2015-08-26 14:22:50.538568
    action ->  InfobarTimeshiftActions timeshiftStop
    action ->  InfobarTimeshiftActions timeshiftStop
    0 80 1
    KEY: 128 1 KEY_STOP STOP 2015-08-26 14:22:50.980329
    [SCREENNAME]  UnhandledKey
    OCready
    1 4 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:54.222029
    0 4 1
    1 4 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:55.987148
    0 4 1
    1 4 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:56.591533
    0 4 1
    1 4 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:57.209452
    0 4 1
    1 4 1
    KEY: 510 0 KEY_ASCII 2015-08-26 14:22:57.801693
    0 4 1
    1 179 1
    KEY: 377 0 KEY_TV TV 2015-08-26 14:23:00.464354
    action ->  EasyInfoActions tv_but
    [SKIN] Parsing embedded skin <embedded-in-'EasySelection'>
    [SKIN] processing screen <embedded-in-'EasySelection'>:
    warning, skin is missing element key_yellow in <class 'Plugins.Extensions.EasyInfo.plugin.EasySelection'>
    warning, skin is missing element key_blue in <class 'Plugins.Extensions.EasyInfo.plugin.EasySelection'>
    warning, skin is missing element number in <class 'Plugins.Extensions.EasyInfo.plugin.EasySelection'>
    warning, skin is missing element lab1 in <class 'Plugins.Extensions.EasyInfo.plugin.EasySelection'>
    warning, skin is missing element key_green in <class 'Plugins.Extensions.EasyInfo.plugin.EasySelection'>
    warning, skin is missing element key_red in <class 'Plugins.Extensions.EasyInfo.plugin.EasySelection'>
    Traceback (most recent call last):
      File "/usr/lib/enigma2/python/Components/ActionMap.py", **** 48, in action
      File "/usr/lib/enigma2/python/Plugins/Extensions/EasyInfo/plugin.py", **** 187, in tvbut
      File "/usr/lib/enigma2/python/mytest.py", **** 321, in open
        dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", **** 259, in instantiateDialog
        return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
      File "/usr/lib/enigma2/python/mytest.py", **** 288, in doInstantiateDialog
        dlg.applySkin()
      File "/usr/lib/enigma2/python/Components/GUISkin.py", **** 114, in applySkin
      File "/usr/lib/enigma2/python/Components/GUISkin.py", **** 47, in createGUIScreen
      File "/usr/lib/enigma2/python/Plugins/Extensions/EasyInfo/plugin.py", **** 1177, in byLayoutEnd
    AttributeError: 'EasySelection' object has no attribute 'services'
    (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x5a300a80>>,('EasyInfoActions', 'tv_but')) failed)
    ]]>
            </enigma2crashlog>
        </crashlogs>
    </openATV>
    Geändert von madie (26.08.2015 um 14:34 Uhr) Grund: code gesetzt

  7. #6
    Avatar von sumpfhuhn0
    Registriert seit
    02.12.2013
    Ort
    NRW
    Beiträge
    874
    Total Downloaded
    814,79 MB
    Total Downloaded
    814,79 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue UHD Quad 4K
     
     
    Ich würde mal das Plugin EasyInfo deinstallieren und mal testen, ob die Box immer noch "abschmiert"
    Gruß. sumpfhuhn0


    Xtrend ET-8500 4x DVB-S2, 1TB HDD, openATV 5.1
    Mut@nt HD2400 2x DVB-S2, 2TB HDD, openATV 5.1
    WWIO Bre2ze 1x DVB-S2, openATV 5.1
    Edison OS mini
    1x DVB-S2 ATV 5.1
    MK Digital Multischalter zur Verteilung von 8 SAT-ZF-Ebenen
    12 Teilnehmer ASTRA+Hotbird


  8. Thanks - bedankten sich
  9. #7
    Senior Mitglied
    Registriert seit
    11.01.2014
    Beiträge
    2.655
    Total Downloaded
    853,92 MB
    Total Downloaded
    853,92 MB
    ReceiverDankeAktivitäten
    und bei tasteneinstellung mal filmliste auf die tv taste legen. kommt man zwar aus radiomodus in die filmliste, aber im minitv läuft der tv kanal. soll nur als überbrückung sein für die kinder
    Gigablue 800 se + mit openmips 5.4, Axas E3HD mit openatv 6.0, os1+ mit openatv 5.3, VU+Solo2SE mit openatv6.0 und Gigablue Quad+ openmips 5.4 SF8 mit atv6.0 und ax HD51 mit atv6.0

  10. Thanks - bedankten sich
  11. #8
    Anfänger
    Registriert seit
    20.05.2015
    Beiträge
    13
    Themenstarter
    Total Downloaded
    20,45 MB
    Total Downloaded
    20,45 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von sumpfhuhn0 Beitrag anzeigen
    Ich würde mal das Plugin EasyInfo deinstallieren und mal testen, ob die Box immer noch "abschmiert"
    Tausend DAnk, Sumpfhuhn0. Genau das war's.


    Zitat Zitat von Hautdenlucas Beitrag anzeigen
    und bei tasteneinstellung mal filmliste auf die tv taste legen. kommt man zwar aus radiomodus in die filmliste, aber im minitv läuft der tv kanal. soll nur als überbrückung sein für die kinder
    Danke, auch dir, Hautdenlucas, gab vorübergehend ein bischen Ruhe mit den Kids.


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 00:37 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 10,53%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com