Thanks Thanks:  0
Ergebnis 1 bis 6 von 6
  1. #1
    Mitglied
    Registriert seit
    20.01.2015
    Beiträge
    37
    Thanks (gegeben)
    10
    Thanks (bekommen)
    1
    Total Downloaded
    89,43 MB
    Total Downloaded
    89,43 MB
    ReceiverDanke
    Box 1:
    VU+Duo2
     
     

    Nach Update bootet Box nicht mehr

    Hallo zusammen,

    habe heute updates gemacht, seidem bootet die Box nicht mehr. Bleibt bei Booting 77 stehen.

    Was nun?

    Danke und Gruß
    backdraft

    •   Alt Advertising

       

  2. #2
    Avatar von madie
    Registriert seit
    05.04.2013
    Beiträge
    481
    Thanks (gegeben)
    1409
    Thanks (bekommen)
    3257
    Total Downloaded
    295,50 MB
    Total Downloaded
    295,50 MB
    ReceiverDanke
    Box 1:
    AX HD51
     
     
    wir brauchen dann ein log.
    Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]

  3. #3
    Mitglied
    Registriert seit
    12.09.2013
    Beiträge
    94
    Thanks (gegeben)
    32
    Thanks (bekommen)
    22
    Total Downloaded
    452,8 KB
    Total Downloaded
    452,8 KB
    ReceiverDanke
    I get this error by opkg update opkg upgrade

    Code:
    Not selecting libblkid1 2.23.2 as installing it would break existing dependencies.
    
    Not selecting libgcc1 4.8.2 as installing it would break existing dependencies.
    
    root@sparktriplex:~#

  4. #4
    Mitglied
    Registriert seit
    05.04.2013
    Beiträge
    84
    Thanks (gegeben)
    19
    Thanks (bekommen)
    2
    Total Downloaded
    651,7 KB
    Total Downloaded
    651,7 KB
    ReceiverDanke
    Box 1:
    VU+ DUO4K
     
     
    Box 2:
    AM510HD
     
     
    Hallo,

    ich bekomme nur eine Fehlermeldung:

    Not selecting libblkid1 2.23.2 as installing it would break existing dependencies.

    Gruß,

    bsv
    VU+ DUO4K
    Samsung SPF-85H
    OpenATV 7.0
    2 * AM510HD TitanNit 1.xy

  5. #5
    Senior Mitglied
    Registriert seit
    14.04.2015
    Beiträge
    518
    Thanks (gegeben)
    97
    Thanks (bekommen)
    20
    Total Downloaded
    1,51 MB
    Total Downloaded
    1,51 MB
    ReceiverDanke
    Box 1:
    VU+ Duo2 4k
     
     
    Box 2:
    AX HD51
     
     
    Box 3:
    AX HD51
     
     
    Box 4:
    Zgemma H7S
     
     
    Box 5:
    VU+ Duo2 (ohne 4k)
     
     
    Bei mir mit einer vu+ duo2:

    Code:
    Not selecting libblkid1 2.23.2 as installing it would break existing dependencies.
    Not selecting libfreetype6 2.5.4 as installing it would break existing dependencies.
    Neustart habe ich noch keinen gemacht und kann ich zur Zeit auch nicht.

    wir brauchen dann ein log.
    Welches? Bitte genauer angeben. "cat /var/log/lastlog" ist leer.

    2. Versuch mit manueller Auswahl:

    Code:
    opkg install libblkid1
    Not selecting libblkid1 2.23.2 as installing it would break existing dependencies.
    Package libblkid1 (2.26.1-r0) installed in root is up to date.
    Code:
    root@vuduo2:~# opkg install libfreetype6
    Not selecting libfreetype6 2.5.4 as installing it would break existing dependencies.
    Package libfreetype6 (2.5.5-r0) installed in root is up to date.
    Edit:
    Meine Duo2 fährt zum Glück noch immer hoch:

    dmesg
    Code:
    root@vuduo2:/var/log# cat dmesg 
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    SMP: CPU1 is running
    Brought up 2 CPUs
    devtmpfs: initialized
    bmem: adding extra 236 MB RESERVED region at 3092 MB (0x0ec00000@0xc1400000)
    NET: Registered protocol family 16
    USB0: power enable is active high; overcurrent is active low
    USB1: power enable is active high; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.17
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to clocksource wktmr
    FS-Cache: Loaded
    NET: Registered protocol family 2
    TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP: reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    bounce pool size: 64 pages
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.22)
    msgmni has been set to 845
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    bootconsole [early0] disabled
    serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
    loop: module loaded
    ahci strict-ahci.0: can't get clock
    __clk_enable: sata [1]
    bcm40nm_pm_sata_enable 00
    ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
    ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    ahci strict-ahci.0: flags: ncq sntf stag clo slum part 
    scsi0 : ahci_platform
    scsi1 : ahci_platform
    ata1: FORCE: PHY spd limit set to 1.5Gbps
    ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
    ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
    brcmstb_nand: NAND controller driver is loaded
    __clk_enable: network [1]
    bcm7425_pm_network_enable 00
    __clk_enable: enet [1]
    bcm40nm_pm_genet_enable 00
    Found PHY at Address 3
    bcmgenet: configuring instance #0 for external RGMII
    __clk_disable: enet [0]
    bcm40nm_pm_genet_disable 00
    __clk_disable: network [0]
    bcm7425_pm_network_disable 00
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    __clk_enable: usb [1]
    bcm40nm_pm_usb_enable 00
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ata1: SATA link down (SStatus 0 SControl 310)
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    usb 4-1: new high-speed USB device number 2 using ehci-brcm
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    IR NEC protocol handler initialized
    IR RC5(x) protocol handler initialized
    IR RC6 protocol handler initialized
    IR JVC protocol handler initialized
    IR Sony protocol handler initialized
    IR RC5 (streamzap) protocol handler initialized
    IR SANYO protocol handler initialized
    IR MCE Keyboard/mouse protocol handler initialized
    usbcore: registered new interface driver btusb
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS0: setting up NAND flash (primary)
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
    NAND device: 1024MiB, SLC, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Bad block table found at page 524224, version 0x01
    Bad block table found at page 524160, version 0x01
    nand_read_bbt: bad block at 0x000004460000
    nand_read_bbt: bad block at 0x0000087a0000
    nand_read_bbt: bad block at 0x000010700000
    nand_read_bbt: bad block at 0x0000146c0000
    nand_read_bbt: bad block at 0x00001eee0000
    nand_read_bbt: bad block at 0x000020ac0000
    nand_read_bbt: bad block at 0x0000211a0000
    nand_read_bbt: bad block at 0x000032a60000
    Creating 4 MTD partitions on "brcmnand.0":
    0x000002700000-0x000040000000 : "rootfs"
    0x000002700000-0x000040000000 : "rootfs(redundant)"
    0x000000200000-0x000000900000 : "kernel"
    0x000000900000-0x000000b00000 : "mac"
    UBI: attaching mtd0 to ubi0
    random: nonblocking pool is initialized
    UBI: scanning is finished
    UBI: attached mtd0 (name "rootfs", size 985 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 7868, bad PEBs: 12, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 40/25, WL threshold: 4096, image sequence number: 1328251795
    UBI: available PEBs: 0, total reserved PEBs: 7868, PEBs reserved for bad PEB handling: 148
    UBI: background thread "ubi_bgt0d" started, PID 53
    ALSA device list:
      No soundcards found.
    ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
    ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
    sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda: sda1
    sd 1:0:0:0: [sda] Attached SCSI disk
    UBIFS: parse sync
    UBIFS: background thread "ubifs_bgt0_0" started, PID 57
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 978350080 bytes (933 MiB, 7705 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 587A260A-4334-4BD8-84EE-DF3DC2D3FD82, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:12.
    devtmpfs: mounted
    Freeing unused kernel memory: 216K (807ea000 - 80820000)
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    usb 4-1: reset high-speed USB device number 2 using ehci-brcm
    ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
    ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
    ieee80211 phy0: Selected rate control algorithm 'pid'
    usbcore: registered new interface driver rt2800usb
    rtusb init rt2870 --->
    usbcore: registered new interface driver rt2870
    Geändert von linuxnutzer (16.05.2015 um 01:48 Uhr)

  6. #6
    Mitglied Avatar von geohei
    Registriert seit
    31.10.2015
    Beiträge
    80
    Thanks (gegeben)
    4
    Thanks (bekommen)
    2
    Total Downloaded
    16,46 MB
    Total Downloaded
    16,46 MB
    ReceiverDanke
    Box 1:
    GigaBlue Ultra UE
     
     
    Wie ist diese Sache mit dem opkg Fehler ausgegangen?

    Ich habe etwas ähnliches.
    http://www.opena.tv/openatv-5-1-ruec...kg-fehler.html


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 11:28 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,88%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com