Thanks: 0
Ergebnis 1 bis 6 von 6
-
10.05.2015, 14:49 #1
- Registriert seit
- 20.01.2015
- Beiträge
- 37
- Thanks (gegeben)
- 10
- Thanks (bekommen)
- 1
- Total Downloaded
- 89,43 MB
- Total Downloaded
- 89,43 MB
Box 1:VU+Duo2Nach Update bootet Box nicht mehr
Hallo zusammen,
habe heute updates gemacht, seidem bootet die Box nicht mehr. Bleibt bei Booting 77 stehen.
Was nun?
Danke und Gruß
backdraft
-
Advertising
-
10.05.2015, 15:04 #2
- Registriert seit
- 05.04.2013
- Beiträge
- 481
- Thanks (gegeben)
- 1409
- Thanks (bekommen)
- 3257
- Total Downloaded
- 295,50 MB
- Total Downloaded
- 295,50 MB
Box 1:AX HD51wir brauchen dann ein log.
Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]
-
10.05.2015, 18:05 #3
- Registriert seit
- 12.09.2013
- Beiträge
- 94
- Thanks (gegeben)
- 32
- Thanks (bekommen)
- 22
- Total Downloaded
- 452,8 KB
- Total Downloaded
- 452,8 KB
I get this error by opkg update opkg upgrade
Code:Not selecting libblkid1 2.23.2 as installing it would break existing dependencies. Not selecting libgcc1 4.8.2 as installing it would break existing dependencies. root@sparktriplex:~#
-
12.05.2015, 17:59 #4
- Registriert seit
- 05.04.2013
- Beiträge
- 84
- Thanks (gegeben)
- 19
- Thanks (bekommen)
- 2
- Total Downloaded
- 651,7 KB
- Total Downloaded
- 651,7 KB
Box 1:VU+ DUO4KBox 2:AM510HDHallo,
ich bekomme nur eine Fehlermeldung:
Not selecting libblkid1 2.23.2 as installing it would break existing dependencies.
Gruß,
bsvVU+ DUO4K
Samsung SPF-85H
OpenATV 7.0
2 * AM510HD TitanNit 1.xy
-
16.05.2015, 00:33 #5
- Registriert seit
- 14.04.2015
- Beiträge
- 518
- Thanks (gegeben)
- 97
- Thanks (bekommen)
- 20
- Total Downloaded
- 1,51 MB
- Total Downloaded
- 1,51 MB
Box 1:VU+ Duo2 4kBox 2:AX HD51Box 3:AX HD51Box 4:Zgemma H7SBox 5:VU+ Duo2 (ohne 4k)Bei mir mit einer vu+ duo2:
Code:Not selecting libblkid1 2.23.2 as installing it would break existing dependencies. Not selecting libfreetype6 2.5.4 as installing it would break existing dependencies.
wir brauchen dann ein log.
2. Versuch mit manueller Auswahl:
Code:opkg install libblkid1 Not selecting libblkid1 2.23.2 as installing it would break existing dependencies. Package libblkid1 (2.26.1-r0) installed in root is up to date.
Code:root@vuduo2:~# opkg install libfreetype6 Not selecting libfreetype6 2.5.4 as installing it would break existing dependencies. Package libfreetype6 (2.5.5-r0) installed in root is up to date.
Meine Duo2 fährt zum Glück noch immer hoch:
dmesg
Code:root@vuduo2:/var/log# cat dmesg Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. SMP: CPU1 is running Brought up 2 CPUs devtmpfs: initialized bmem: adding extra 236 MB RESERVED region at 3092 MB (0x0ec00000@0xc1400000) NET: Registered protocol family 16 USB0: power enable is active high; overcurrent is active low USB1: power enable is active high; overcurrent is active low bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.17 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource wktmr FS-Cache: Loaded NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. bounce pool size: 64 pages NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.22) msgmni has been set to 845 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A console [ttyS0] enabled bootconsole [early0] disabled serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A loop: module loaded ahci strict-ahci.0: can't get clock __clk_enable: sata [1] bcm40nm_pm_sata_enable 00 ahci strict-ahci.0: SSS flag set, parallel bus scan disabled ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode ahci strict-ahci.0: flags: ncq sntf stag clo slum part scsi0 : ahci_platform scsi1 : ahci_platform ata1: FORCE: PHY spd limit set to 1.5Gbps ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42 ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42 brcmstb_nand: NAND controller driver is loaded __clk_enable: network [1] bcm7425_pm_network_enable 00 __clk_enable: enet [1] bcm40nm_pm_genet_enable 00 Found PHY at Address 3 bcmgenet: configuring instance #0 for external RGMII __clk_disable: enet [0] bcm40nm_pm_genet_disable 00 __clk_disable: network [0] bcm7425_pm_network_disable 00 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver __clk_enable: usb [1] bcm40nm_pm_usb_enable 00 ehci-brcm ehci-brcm.0: Broadcom STB EHCI ata1: SATA link down (SStatus 0 SControl 310) ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ehci-brcm ehci-brcm.2: Broadcom STB EHCI ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3 ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300 ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected ehci-brcm ehci-brcm.3: Broadcom STB EHCI ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4 ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500 ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5 ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6 ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600 hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected ohci-brcm ohci-brcm.2: Broadcom STB OHCI ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7 ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400 hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected ohci-brcm ohci-brcm.3: Broadcom STB OHCI ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8 ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600 usb 4-1: new high-speed USB device number 2 using ehci-brcm hub 8-0:1.0: USB hub found hub 8-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR SANYO protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized usbcore: registered new interface driver btusb sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Key type dns_resolver registered PM: CP0 COUNT/COMPARE frequency does not depend on divisor EBI CS0: setting up NAND flash (primary) NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit) NAND device: 1024MiB, SLC, page size: 2048, OOB size: 64 brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC Bad block table found at page 524224, version 0x01 Bad block table found at page 524160, version 0x01 nand_read_bbt: bad block at 0x000004460000 nand_read_bbt: bad block at 0x0000087a0000 nand_read_bbt: bad block at 0x000010700000 nand_read_bbt: bad block at 0x0000146c0000 nand_read_bbt: bad block at 0x00001eee0000 nand_read_bbt: bad block at 0x000020ac0000 nand_read_bbt: bad block at 0x0000211a0000 nand_read_bbt: bad block at 0x000032a60000 Creating 4 MTD partitions on "brcmnand.0": 0x000002700000-0x000040000000 : "rootfs" 0x000002700000-0x000040000000 : "rootfs(redundant)" 0x000000200000-0x000000900000 : "kernel" 0x000000900000-0x000000b00000 : "mac" UBI: attaching mtd0 to ubi0 random: nonblocking pool is initialized UBI: scanning is finished UBI: attached mtd0 (name "rootfs", size 985 MiB) to ubi0 UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 UBI: good PEBs: 7868, bad PEBs: 12, corrupted PEBs: 0 UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 UBI: max/mean erase counter: 40/25, WL threshold: 4096, image sequence number: 1328251795 UBI: available PEBs: 0, total reserved PEBs: 7868, PEBs reserved for bad PEB handling: 148 UBI: background thread "ubi_bgt0d" started, PID 53 ALSA device list: No soundcards found. ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk UBIFS: parse sync UBIFS: background thread "ubifs_bgt0_0" started, PID 57 UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS: FS size: 978350080 bytes (933 MiB, 7705 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) UBIFS: reserved for root: 0 bytes (0 KiB) UBIFS: media format: w4/r0 (latest is w4/r0), UUID 587A260A-4334-4BD8-84EE-DF3DC2D3FD82, small LPT model VFS: Mounted root (ubifs filesystem) on device 0:12. devtmpfs: mounted Freeing unused kernel memory: 216K (807ea000 - 80820000) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) usb 4-1: reset high-speed USB device number 2 using ehci-brcm ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected ieee80211 phy0: Selected rate control algorithm 'pid' usbcore: registered new interface driver rt2800usb rtusb init rt2870 ---> usbcore: registered new interface driver rt2870
Geändert von linuxnutzer (16.05.2015 um 00:48 Uhr)
-
07.01.2016, 18:32 #6
- Registriert seit
- 31.10.2015
- Beiträge
- 80
- Thanks (gegeben)
- 4
- Thanks (bekommen)
- 2
- Total Downloaded
- 16,46 MB
- Total Downloaded
- 16,46 MB
Box 1:GigaBlue Ultra UEWie ist diese Sache mit dem opkg Fehler ausgegangen?
Ich habe etwas ähnliches.
http://www.opena.tv/openatv-5-1-ruec...kg-fehler.html
Lesezeichen