Thanks Thanks:  0
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 13
  1. #1
    Anfänger
    Registriert seit
    08.12.2013
    Beiträge
    24
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten

    Vu+ Solo Se schaltet nach Update automatisch in Standby

    Hi
    Es gibt ein kleines Problem mit dem Openatv 4.2 Image und einer Vu+ Solo Se.

    Immer wenn ich ein Update mache und die Box danach neu gestartet wird fährt sie ganz normal hoch schaltet sich nach dem Hochfahren aber sofort in den Standby.

    Ich vermute es hat etwas mit der Einstellung : Nach Stromausfall in Standby gehen zu tun.
    Nur erstens Sollte der Neustart ja nicht als Stromausfall gewertet werden.
    und zweitens kam bei meiner alten Box normalerweise erst noch eine Mitteilung das die Box nicht richtig runtergefahren wurde und in Standby geht.

    Kann man das bitte beheben???

    •   Alt Advertising

       

  2. #2
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.786
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    hm , kannst du mal in den crashlog settings das e2 log Aktivieren, und dann das noch mal machen und das log hier anhängen mal schauen was die box da macht

  3. #3
    Anfänger
    Registriert seit
    08.12.2013
    Beiträge
    24
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Ok beim nächsten Update Versuch ich es mal mitzuloggen.

    Gesendet von meinem ME173X mit Tapatalk

  4. #4
    Anfänger
    Registriert seit
    08.12.2013
    Beiträge
    24
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Hi

    So ich hab das Log aktiviert, Update durchgeführt, Box hat neu gestartet, hat sich automatisch in Standby geschalten.
    Dann habe ich sie wieder angeschalten, Das Log deaktiviert.

    Und hier ist das Log:
    Code:
    + (1) Background File Eraser+ (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    12150k video mem
    setting /dev/tty0 status failed.
     - double buffering available!
    5670kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 5760)
    + (9) gLCDDC
    found OLED display!
    lcd buffer 0x7c82d8 8448 bytes, stride 132
    LCD resolution: 132 x 64 x 8 (stride: 132)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    PYTHONPATH: /usr/lib/enigma2/python
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    + (21) input device driver
    Input device "dreambox advanced remote control (native)" is a keyboard
    Found 1 input devices.
    + (22) Hdmi CEC driver
    eHdmiCEC: detected physical address change: 1000 --> 1100
    eHdmiCEC: send message 84 11 00 03 
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    done, found 1 common interface slots
    + (35) CA handler
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    + (41) Encoders
    + (41) Stream server
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 213 channels/transponders and 3752 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 4
    Use valid Linux Time :) (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
    found 6 spinner!
    setIoPrio best-effort level 3 ok
    couldn't open /proc/stb/misc/12V_output
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    new Harddisk sdb -> /dev/sdb -> /dev/sdb
    [Harddisk] enumerating network mounts...
    new Network Mount FRITZNAS -> /media/net/FRITZNAS
    Reading satellites.xml
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL6211), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: simple
    diseqcmode:  diseqc_a_b_c_d
    sec config completed
    [NimManager] slot name=Vuplus DVB-S NIM(AVL6211)
    [NimManager] multiType = True
    [Picon] adding path: /media/usb/picon/
    main thread is non-idle! display spinner!
    [Time By]: Transponder
    [EPGC] time updated.. but cache file not set yet.. dont start epg!!
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...executing main
    OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
     - double buffering available!
    4050kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5760)
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.MySkin.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.MySkin.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.MySkin.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.MySkin.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.MySkin.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language Deutsch
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    cannot open /proc/stb/avs/0/input_choices
    [VideoMode] setting scaler_sharpness to: 0000000D
    [VideoMode] setMode - port: HDMI, mode: 1080p, rate: multi
    Renumbering...
    [EPGC Loads] Poller enabled.
    [EPGC Save] Poller enabled.
    [EPGC] setCacheFile read/write epg data from/to '/media/usb/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    [EPGC] 6826 events read from /media/usb/epg.dat
    Setting OSD position: 0 720 0 576
    Setting OSD alpha: 255
    Setting 3D mode: off
    Setting 3D depth: 50
    [EPGC Save] Poller enabled.
    [EPGC Loads] Poller enabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    Module 'mechanize' loaded
    Twisted Agent in use (13, 2, 0)
    Module 'ast' loaded
    Module 'mechanize' loaded
    [Ipkg] Added to OPKG destinations: /
    [Info-Panel] machinebrand: Vu+
    [Info-Panel] machinename: Solo SE
    [Info-Panel] oem name: vuplus
    [Info-Panel] boxtype: vusolose
    Plugin  Extensions/WebInterface failed to load: No module named plugin
    Module 'mechanize' loaded
    [TranscodingSetup] set /proc/stb/encoder/enable to enable
    [TranscodingSetup] set /proc/stb/encoder/0/bitrate to 400000
    [TranscodingSetup] set /proc/stb/encoder/0/framerate to 50000
    [TranscodingSetup] set port 8002
    Restarting internet superserver: inetd .
    --> setting contrast to: 00008000
    --> setting saturation to: 00008000
    --> setting hue to: 00008000
    --> setting brightness to: 00008000
    --> setting block_noise_reduction to: 00000000
    --> setting mosquito_noise_reduction to: 00000000
    --> setting digital_contour_removal to: 00000000
    --> setting splitmode to: off
    --> setting sharpness to: 00000000
    --> setting auto_flesh to: 00000000
    --> setting green_boost to: 00000000
    --> setting blue_boost to: 00000000
    --> setting dynamic_contrast to: 00000000
    --> setting color_soace to: Edid(Auto)
    --> setting scaler_vertical_dejagging to: disable
    --> setting smooth to: disable
    --> applying pep values
    command ['umount -fl /media/net/FRITZNAS', 'sleep 2', 'mount //192.168.1.1/FRITZ.NAS']
    <RemoteControlCode> Write Remote Control Code : 2
    eHdmiCEC: send message 84 11 00 03 
    [AutoTimer] Auto Poll Enabled
    [CI_Assignment] activating ci configs:
    [CI_Activate] FOUND 1 CI Slots 
    [CI_Activate_Config_CI0] no config file found
    [CI_Activate_Config_CI0] error parsing xml...
    starting hotplug handler
    [PowerTimer] PowerTimerEntry(type=deepstandby, begin=Wed Sep 10 00:00:00 2014)
    [PowerTimer] PowerTimerEntry(type=wakeuptostandby, begin=Wed Sep 10 07:00:00 2014)
    [NAVIGATION] wasTimerWakeup = True
    POWERTIMER: wakeup to standby detected.
    
    
    [CustomSubservicesPlugin] start
    
    
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    EMC: +++ EMC V3.7.4beta20131015 startup
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Di 09 Sep 2014 09:15:12 CEST
    [(100, <class 'Screens.InfoBar.InfoBar'>)]
    MetrixHDWeatherStandalone lookup for ID 643085
    warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    [SCREENNAME]  RdsInfoDisplaySummary
    warning, skin is missing element From in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
    warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
    RemovePopup, id = ZapError
    MetrixHDWeatherStandalone lookup for ID 643085
    [SCREENNAME]  RdsInfoDisplay
    [SCREENNAME]  InfoBarSummary
    [SCREENNAME]  InfoBar
    setValue 100
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    lastshutdown=True        (True = last shutdown was OK)
    NOK shutdown action=standby
    bootup action=normal
    killall: showiframe: no process killed
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/media/usb/logs', '/home/root/logs']
    [LogManager] looking in: /media/usb/logs
    [LogManager] /media/usb/logs: bytesToRemove -10475599
    [LogManager] looking in: /home/root/logs
    [NTP]: setting E2 time: 1410246914.75
    eHdmiCEC: send message 7D 
    playing 1:0:19:EF75:3F9:1:C00000:0:0:0:
    [SCREENNAME]  InfoBar
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 03f9:0001
    opening frontend 0
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1714 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:
    allocate demux
    [CAMSTARTER] Start/Check: 1
    [CAMSTARTER] no CAM active, starting /usr/bin/CCcam_2.3.0 -t -C /etc/CCcam.cfg
    eHdmiCEC: received message 7E 01 
    eHdmiCec: volume forwarding to device 05 enabled
    poll: unhandled POLLERR/HUP/NVAL for fd 33(17)
    poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
    poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
    [eBatch] retval=0, cmds left=2, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    [EPGC] Saving EPGCache.
    [EPGC] store epg to realpath '/media/usb/epg.dat'
    [EPGC] 6786 events written to /media/usb/epg.dat
    [SEC] set static current limiting
    eHdmiCEC: send message 7D 
    EMC: Setting EPG language: de_DE
    [VLC] Checking for buildin servicets ...  no
    [VLC] Checking for existing and usable servicets.so ...  No module named servicets
    [VLC] Checking for usable gstreamer service ...  yes
    EMC: Next trashcan cleanup in 45 minutes
    eHdmiCEC: received message 7E 01 
    eHdmiCec: volume forwarding to device 05 enabled
    0.0.0.0
    192.168
    ER plugin not found
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    [eBatch] retval=0, cmds left=1, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
    job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
    [EPGC] Refreshing EPGCache.
    [EPGC] 6786 events read from /media/usb/epg.dat
    set sequence pos 3
    set sequence pos 4
    job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
    [SEC] setVoltage 2
    [SEC] sleep 200ms
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [eBatch] retval=0, cmds left=0, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
    [SEC] sendDiseqc: e01038f2(?)
    [SEC] sleep 100ms
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1f, inversion off, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x2c033a0 running
    [eEPGCache] channel 0x2c033a0 running
    [EPGC] next update in 2 sec
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
    allocate demux
    decoder state: play, vpid=511, apid=515
    DMX_SET_PES_FILTER(0x1ff) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x203) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(0) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 1 - ok
    DMX_SET_PES_FILTER(0x1ff) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x21) - ttx - ok
    DEMUX_START - ttx - ok
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    AUDIO_CHANNEL_SELECT(0) - ok
    disable teletext subtitles page ffffffffffffffff (und)
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 100
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
    RemovePopup, id = ZapError
    VIDEO_GET_EVENT - ok
    PATready
    use pmtpid 0061 for service_id ef75
    eventNewProgramInfo 0 0
    have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
    decoder state: play, vpid=511, apid=515
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 100
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    EMC delPathFromCache /hdd/movie/trashcan
    EMC: [EMCMS] trashcan cleanup: nothing to delete...
    [SEC] set dynamic current limiting
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [Dish] tuning failed
    AITready
    [SCREENNAME]  InfoBar
    [EPGC] start caching events(1410246921)
    OCready
    sdt update done!
    [eDVBLocalTimerHandler] diff is 0
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] not changed
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [CAMSTARTER] Start/Check: 2
    2014-09-09 09:15:25.195916
    [CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.3.0
    [CAMSTARTER] Cam is running, exit camstarter
    [NAVIGATION] TIMER: now entering standby
    enter standby
    [eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF75:3F9:1:C00000:0:0:0:
    [eDVBCAService] free service 1:0:19:EF75:3F9:1:C00000:0:0:0:
    setPixmapNum(0) failed! defined pixmaps: []
    decoder state: play, vpid=-1, apid=-1
    DEMUX_STOP - pcr - ok
    DEMUX_STOP - video - ok
    VIDEO_STOP - ok
    AUDIO_STOP - ok
    DEMUX_STOP - audio - ok
    AUDIO_CONTINUE - ok
    DEMUX_STOP - ttx - ok
    start release channel timer
    [SCREENNAME]  StandbySummary
    eHdmiCEC: send message 36 
    eHdmiCEC: send message 36 
    [SCREENNAME]  Standby
    eHdmiCEC: received message 36 
    eHdmiCEC: send message 44 6C 
    [EPGC] abort non avail schedule other reading
    [EPGC] abort non avail netmed schedule reading
    [EPGC] abort non avail netmed schedule other reading
    [EPGC] abort non avail FreeSat schedule_other reading
    [EPGC] abort non avail viasat reading
    [EPGC] nownext finished(1410246929)
    [DVBCAHandler] no more services
    release cached channel (timer timeout)
    [eDVBLocalTimerHandler] remove channel 0x2c033a0
    [eEPGCache] remove channel 0x2c033a0
    [EPGC] abort caching events !!
    stop release channel timer
    close frontend 0
    1 74 1
    KEY: 116 KEY_POWER POWER 2014-09-09 09:15:37.367900
    action ->  StandbyActions power
    leave standby
    [SCREENNAME]  InfoBarSummary
    0 74 1
    KEY: 116 KEY_POWER POWER 2014-09-09 09:15:37.710750
    playing 1:0:19:EF75:3F9:1:C00000:0:0:0:
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 03f9:0001
    opening frontend 0
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1714 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:
    allocate demux
    [SEC] set static current limiting
    set sequence pos 3
    set sequence pos 4
    [SEC] setVoltage 2
    [SEC] sleep 200ms
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f2(?)
    [SEC] sleep 100ms
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    eHdmiCEC: send message 04 
    (0)fe event: status 1f, inversion off, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x2c7a7f8 running
    [eEPGCache] channel 0x2c7a7f8 running
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    [EPGC] next update in 2 sec
    have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
    allocate demux
    decoder state: play, vpid=511, apid=515
    DMX_SET_PES_FILTER(0x1ff) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x203) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(0) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 1 - ok
    DMX_SET_PES_FILTER(0x1ff) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x21) - ttx - ok
    DEMUX_START - ttx - ok
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    disable teletext subtitles page ffffffffffffffff (und)
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 100
    [Volume Adjust] load xml...
    [eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
    [SCREENNAME]  InfoBar
    RemovePopup, id = ZapError
    PATready
    use pmtpid 0061 for service_id ef75
    eventNewProgramInfo 0 0
    have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
    decoder state: play, vpid=511, apid=515
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 100
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    [eDVBCAService] don't build/send the same CA PMT twice
    [SEC] set dynamic current limiting
    [Dish] tuning failed
    eHdmiCEC: send message 82 11 00 
    sdt update done!
    AITready
    [SCREENNAME]  InfoBar
    [eDVBLocalTimerHandler] diff is 1
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] set RTC Time
    [eDVBLocalTimerHandler] update RTC
    [eDVBLocalTimerHandler] time update to 09:15:41
    [eDVBLocalTimerHandler] m_time_difference is 1
    [eDVBLocalTimerHandler] set Linux Time
    eHdmiCEC: send message 44 6D 
    [EPGC] start caching events(1410246941)
    OCready
    eHdmiCEC: send message 70 11 00 
    eHdmiCEC: received message 72 01 
    eHdmiCec: volume forwarding to device 05 enabled
    [EPGC] abort non avail schedule other reading
    [EPGC] abort non avail netmed schedule reading
    [EPGC] abort non avail netmed schedule other reading
    [EPGC] abort non avail FreeSat schedule_other reading
    [EPGC] abort non avail viasat reading
    [EPGC] nownext finished(1410246949)
    eHdmiCEC: received message 32 67 65 72 
    eHdmiCEC: received message 8D 02 
    eHdmiCEC: received message 
    eHdmiCEC: send message 8E 00 
    [EPGC] schedule finished(1410246952)
    [EPGC] stop caching events(1410246952)
    [EPGC] next update in 60 min
    eHdmiCEC: send message 8E 00 
    eHdmiCEC: received message 8C 
    eHdmiCEC: send message 87 00 00 00 
    1 18f 1
    KEY: 399 KEY_GREEN GREEN 2014-09-09 09:15:54.177207
    0 18f 1
    KEY: 399 KEY_GREEN GREEN 2014-09-09 09:15:54.408283
    action ->  InfobarSubserviceSelectionActions GreenPressed
    [SCREENNAME]  PluginBrowserSummary
    [ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/PiconsUpdater/plugin.png
    [SCREENNAME]  PluginBrowser
    eHdmiCEC: received message 46 
    eHdmiCEC: send message 47 76 75 73 6F 6C 6F 73 65 
    eHdmiCEC: received message A0 00 00 F0 23 
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:15:56.900695
    action ->  SetupActions ok
    [SKIN] Parsing embedded skin <embedded-in-'DreamExplorerII'>
    warning, skin is missing element TEMPfl in <class 'Plugins.Extensions.DreamExplorer.plugin.DreamExplorerII'>
    [SCREENNAME]  ['DreamExplorerII_summary', 'SimpleSummary']
    [SCREENNAME]  DreamExplorerII
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:15:57.026329
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:15:57.710621
    action ->  WizardActions ok
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:15:57.835015
    1 69 1
    KEY: 105 KEY_LEFT LEFT 2014-09-09 09:15:58.133393
    action ->  WizardActions left
    eHdmiCEC: received message 9F 
    0 69 1
    KEY: 105 KEY_LEFT LEFT 2014-09-09 09:15:58.257970
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:15:58.513330
    action ->  WizardActions ok
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:15:58.638328
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.415106
    action ->  WizardActions down
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.539189
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.772695
    action ->  WizardActions down
    eHdmiCEC: received message 87 00 A0 DE 
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.897009
    eHdmiCEC: received message 84 10 00 05 
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:00.099145
    action ->  WizardActions ok
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:00.224014
    eHdmiCEC: received message 85 
    eHdmiCEC: received message 8D 02 
    eHdmiCEC: send message 82 11 00 
    eHdmiCEC: received message 8D 02 
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:03.121966
    action ->  WizardActions back
    ignore request to play already running service(1)
    [SCREENNAME]  PluginBrowserSummary
    [ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/PiconsUpdater/plugin.png
    [SCREENNAME]  PluginBrowser
    eHdmiCEC: send message 8E 00 
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:03.354089
    eHdmiCEC: send message 8E 00 
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:04.712459
    action ->  SetupActions cancel
    unknown action SetupActions/cancel! typo in keymap?
    action ->  WizardActions back
    [SCREENNAME]  InfoBarSummary
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:04.944031
    1 8b 1
    KEY: 139 KEY_MENU MENU 2014-09-09 09:16:05.972513
    action ->  InfobarMenuActions mainMenu
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_mainmenu', 'Menu']
    0 8b 1
    KEY: 139 KEY_MENU MENU 2014-09-09 09:16:06.207288
    1 6a 1
    KEY: 106 KEY_RIGHT RIGHT 2014-09-09 09:16:06.989103
    0 6a 1
    KEY: 106 KEY_RIGHT RIGHT 2014-09-09 09:16:07.113450
    1 67 1
    KEY: 103 KEY_UP UP 2014-09-09 09:16:07.734442
    0 67 1
    KEY: 103 KEY_UP UP 2014-09-09 09:16:07.858897
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:08.199407
    action ->  OkCancelActions ok
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_setup', 'Menu']
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:08.326499
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:09.035744
    action ->  OkCancelActions ok
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_system', 'Menu']
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:09.336156
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:10.864831
    action ->  OkCancelActions ok
    warning, skin is missing element HelpWindow in <class 'Screens.VideoMode.VideoSetup'>
    warning, skin is missing element footnote in <class 'Screens.VideoMode.VideoSetup'>
    [SCREENNAME]  SetupSummary
    [SCREENNAME]  ['Setup']
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:10.989157
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:12.801063
    action ->  SetupActions cancel
    [SCREENNAME]  ['MessageBox_summary', 'SimpleSummary']
    [SCREENNAME]  ['MessageBox']
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:13.032021
    671
    2014-09-09 09:16:13.565183
    [CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.3.0
    Unhandled error in Deferred:
    Unhandled Error
    Traceback (most recent call last):
      File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
        
      File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
        
      File "/usr/lib/python2.7/threading.py", line 504, in run
        
    --- <exception caught here> ---
      File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
        result = context.call(ctx, function, *args, **kwargs)
      File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
        return self.currentContext().callWithContext(ctx, func, *args, **kw)
      File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
        return func(*args,**kw)
      File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 77, in JobTask
        
      File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 196, in doCheck
        
      File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 88, in FrozenCCcam
        
      File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 27, in confPath
        
    exceptions.NameError: global name 'popen' is not defined
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:13.985366
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:14.216034
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:14.407527
    action ->  MsgBoxActions ok
    [SCREENNAME]  SetupSummary
    [SCREENNAME]  ['Setup']
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_system', 'Menu']
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:14.542421
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.241961
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.366223
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.526019
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.651584
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.800636
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.925200
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.075214
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.200320
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.379160
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.503347
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:17.888999
    action ->  OkCancelActions ok
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    accel alloc failed
    
    
    ERROR: accelAlloc failed
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_extended', 'Menu']
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:18.138391
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.143423
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.267983
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.417875
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.542251
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.692493
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.816987
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.967015
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.091203
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.241481
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.366215
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.516157
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.641024
    1 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:20.961847
    action ->  OkCancelActions ok
    warning, skin is missing element HelpWindow in <class 'Screens.Setup.Setup'>
    warning, skin is missing element footnote in <class 'Screens.Setup.Setup'>
    [SCREENNAME]  SetupSummary
    [SCREENNAME]  ['setup_logs', 'Setup']
    0 160 1
    KEY: 352 KEY_OK OK 2014-09-09 09:16:21.087877
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:21.831742
    action ->  SetupActions down
    unknown action SetupActions/down! typo in keymap?
    action ->  SetupActions down
    unknown action SetupActions/down! typo in keymap?
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:21.956151
    1 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:22.264780
    action ->  SetupActions down
    unknown action SetupActions/down! typo in keymap?
    action ->  SetupActions down
    unknown action SetupActions/down! typo in keymap?
    0 6c 1
    KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:22.389831
    1 69 1
    KEY: 105 KEY_LEFT LEFT 2014-09-09 09:16:23.087655
    action ->  SetupActions left
    unknown action SetupActions/left! typo in keymap?
    action ->  SetupActions left
    0 69 1
    KEY: 105 KEY_LEFT LEFT 2014-09-09 09:16:23.211131
    1 18f 1
    KEY: 399 KEY_GREEN GREEN 2014-09-09 09:16:24.616649
    0 18f 1
    KEY: 399 KEY_GREEN GREEN 2014-09-09 09:16:24.847111
    action ->  SetupActions save
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_extended', 'Menu']
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:26.484605
    action ->  OkCancelActions cancel
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_system', 'Menu']
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:26.716065
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.100090
    action ->  OkCancelActions cancel
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_setup', 'Menu']
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.331860
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.684419
    action ->  OkCancelActions cancel
    [SCREENNAME]  MenuSummary
    [SCREENNAME]  ['menu_mainmenu', 'Menu']
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.916102
    1 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:28.224642
    action ->  OkCancelActions cancel
    [SCREENNAME]  InfoBarSummary
    0 ae 1
    KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:28.456059
    Ich hoffe es hilft um das Problem zu finden.

  5. #5
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.786
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    sehe da aber noch andere Fehler , schau ich mir die Tage an , bin gerade aber Unterwegs

  6. #6
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.786
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    sehe gerade das

    POWERTIMER: wakeup to standby detected.

    kannst mal schauen ob bei dir noch ein alter Powertimer da ist der sich selbständig gemacht hat

    die anderen fehler im log fixen wir auch noch

    sehe da auch noch Treiber fehler durch den neuen Kernel also auch für VU was neues

  7. #7
    Avatar von Black_64
    Registriert seit
    04.04.2013
    Beiträge
    1.165
    Total Downloaded
    3,54 MB
    Total Downloaded
    3,54 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von Mandrake2k Beitrag anzeigen
    Hi

    So ich hab das Log aktiviert, Update durchgeführt, Box hat neu gestartet, hat sich automatisch in Standby geschalten.
    Dann habe ich sie wieder angeschalten, Das Log deaktiviert.

    Ich hoffe es hilft um das Problem zu finden.
    Danke fur das log !!

    Can you try this file?
    Copy it to /usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.pyo and REBOOT your box.
    Angehängte Dateien Angehängte Dateien

  8. #8
    Anfänger
    Registriert seit
    08.12.2013
    Beiträge
    24
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Ich habe das Problem eingrenzen können. Der Powertimer funktioniert nicht richtig.
    Ich habe normalerweise 2 Timer eingestellt. Einer das die Box um 0 Uhr in Deepstandby fährt.
    Der zweite das die Box um 7 Uhr aufwacht und in den Standby fährt.
    Der Aufwachtimer macht das Problem. Mittlerweile wird die Box sogar automatisch in den Standby geschickt wenn ich ein Manuellen Neustart mache.
    Sobald ich den Aufwachtimer deaktiviere ist alles normal. Auch wenn ein Update gefahren wird und die Box neustartet bleibt sie dann an.

    Es liegt also am Powertimer. Ich habe das mal mit der Zeitangabe getestet. Wenn ich die Box Aufwachen und in Standby fahren lassen will wiederholend von 7 Uhr bis 7:05 Uhr
    Löst der Timer auch ausserhalb der Zeit aus z.b. wenn ich um 11 Uhr die Box manuell neustarte. Das darf eigentlich nicht sein

  9. #9
    Anfänger
    Registriert seit
    08.12.2013
    Beiträge
    24
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von Black_64 Beitrag anzeigen
    Danke fur das log !!

    Can you try this file?
    Copy it to /usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.pyo and REBOOT your box.
    Ich habe die Datei ersetzt. Die Box reagiert normal und läuft wie vorher auch. Der angegebene Fehler liegt wohl am Powertimer.

  10. #10
    Avatar von Black_64
    Registriert seit
    04.04.2013
    Beiträge
    1.165
    Total Downloaded
    3,54 MB
    Total Downloaded
    3,54 MB
    ReceiverDankeAktivitäten
    Please add a new log with this file. It's only for camcheck problem.


Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 05:20 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com