Ergebnis 1 bis 4 von 4
  1. #1
    Anfänger
    Registriert seit
    18.08.2014
    Beiträge
    2
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Total Downloaded
    1.000,7 KB
    Total Downloaded
    1.000,7 KB
    ReceiverDanke

    WLAN Modul 8812.ko

    Moin,

    folgendes Problem:
    Code:
    root@atemio5x00:~# modprobe -v 8812au
    insmod /lib/modules/3.12.1/kernel/drivers/net/wireless/8812au.ko 
    modprobe: ERROR: could not insert '8812au': Unknown symbol in module, or unknown parameter (see dmesg)
    root@atemio5x00:~#
    
    root@atemio5x00:~# dmesg
    ...
    8812au: Unknown symbol rtw_proc_remove_one (err 0)
    8812au: Unknown symbol rtw_proc_init_one (err 0)
    
    root@atemio5x00:~# uname -a
    Linux atemio5x00 3.12.1 #1 Tue Aug 12 06:00:32 CEST 2014 mips GNU/Linux
    root@atemio5x00:~#
    WLAN-Adapter: ASUS USB-AC56, PID 0b05 VID 17d2

    Box: Atemio 5200HD

    Kann da irgendwas gefixt werden?

    Gruß
    Capt. Bluebaer

  2. Thanks oldfox bedankten sich
    •   Alt Advertising

       

  3. #2
    Senior Mitglied
    Registriert seit
    31.08.2013
    Beiträge
    118
    Thanks (gegeben)
    2
    Thanks (bekommen)
    10
    Total Downloaded
    79,95 MB
    Total Downloaded
    79,95 MB
    ReceiverDanke
    Box 1:
    Vu+Solo2
     
     
    d-link has same driver (dwa-171)

    Driver for Linux:
    Supports Linux kernel 2.6.18 - 3-10 only
    VU+ Solo2

  4. #3
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke
    Unknown symbol in module, or unknown parameter (see dmesg

    bedeutet das ein zusätzlicher Modul noch fehlt

    ich benötige mal

    dmesg infos nach einstecken

    ich hab so ein stick nicht


    openATV we are open Source

    Boykott GPL violator

  5. #4
    Anfänger
    Registriert seit
    18.08.2014
    Beiträge
    2
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    1.000,7 KB
    Total Downloaded
    1.000,7 KB
    ReceiverDanke
    hier nochmal dmesg komplett nach Einstecken:
    Code:
    root@atemio5x00:~# dmesg
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to clocksource wktmr
    FS-Cache: Loaded
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP: reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.22)
    msgmni has been set to 459
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
    loop: module loaded
    brcmstb_nand: NAND controller driver is loaded
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm7552_pm_genet_enable 00
    Config internal EPHY through MDIO
    __clk_disable: enet [0]
    bcm7552_pm_genet_disable 00
    __clk_disable: network [0]
    usbcore: registered new interface driver zd1201
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    __clk_enable: usb [1]
    bcm7552_pm_usb_enable 00
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    EBI CS2: setting up NAND flash (primary)
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-1
    
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    nand_read_bbt: bad block at 0x000004700000
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000000000-0x00001f900000 : "rootfs"
    0x000000000000-0x000020000000 : "entire_device"
    0x00001f900000-0x00001ff00000 : "kernel"
    EBI CS0: setting up SPI flash
    spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    m25p80 spi0.0: found mx25l3205d, expected m25p80
    m25p80 spi0.0: mx25l3205d (4096 Kbytes)
    Creating 6 MTD partitions on "spi0.0":
    0x000000000000-0x000000080000 : "cfe"
    0x000000080000-0x000000280000 : "splash"
    0x000000280000-0x000000300000 : "macadr"
    0x000000300000-0x000000380000 : "nvram"
    0x000000380000-0x0000003c0000 : "bootconfig"
    0x0000003c0000-0x000000400000 : "facconfig"
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    UBI: attaching mtd0 to ubi0
    UBI: scanning is finished
    UBI: attached mtd0 (name "rootfs", size 505 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 4039, bad PEBs: 1, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1949959495
    UBI: available PEBs: 0, total reserved PEBs: 4039, PEBs reserved for bad PEB handling: 79
    UBI: background thread "ubi_bgt0d" started, PID 46
    UBI error: ubi_attach_mtd_dev: mtd0 is already attached to ubi0
    UBI error: ubi_init: cannot attach mtd0
    ALSA device list:
      No soundcards found.
    UBIFS: background thread "ubifs_bgt0_0" started, PID 47
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 500920320 bytes (477 MiB, 3945 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 4DB0B854-95A6-4894-8221-ABC096C55FA1, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:10.
    devtmpfs: mounted
    Freeing unused kernel memory: 240K (80774000 - 807b0000)
    Algorithmics/MIPS FPU Emulator v1.5
    usb 1-2: new high-speed USB device number 2 using ehci-brcm
    usb-storage 1-2:1.0: USB Mass Storage device detected
    scsi0 : usb-storage 1-2:1.0
    scsi 0:0:0:0: Direct-Access     Toshiba  External USB HDD 1.03 PQ: 0 ANSI: 4
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
    sd 0:0:0:0: [sda] No Caching mode page found
    sd 0:0:0:0: [sda] Assuming drive cache: write through
    sd 0:0:0:0: [sda] No Caching mode page found
    sd 0:0:0:0: [sda] Assuming drive cache: write through
     sda: sda1
    sd 0:0:0:0: [sda] No Caching mode page found
    sd 0:0:0:0: [sda] Assuming drive cache: write through
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    dvb: module_layout: kernel tainted.
    Disabling lock debugging due to kernel taint
    [platform_i2c_mutex_init] ...
    machine = 220 
    fb0: brcmfb frame buffer device
    [mcu_i2c_read] NEXUS_I2c_Read(11) nErr = 1114113 
    [fp_mcu_set_interface] BLADE1128 not found 
    [MCU] ver : 2.00.43
    [MCU] model : RHS300AM
    [MCU] power : SWITCH
    input: dreambox front panel as /devices/virtual/input/input0
    input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    DVB: registering new adapter (dvb)
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 INTERNAL)...
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm7552_pm_genet_enable 00
    eth0 Link DOWN.
    eth0 Link UP.
    Auto config phy
    eth0: Link is up, 100 Mbps Full Duplex
    NET: Registered protocol family 10
    [video_videomodepreferred_read] mode(0) not found!!!
    [video_videomode60hz_write] videomode(9) not supported
    [video_videomodepreferred_read] mode(0) not found!!!
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/21 23:04:38 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 01:04:38 
    [fp_mcu_set_time] 2014/08/21 23:15:07 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 01:15:07 
    [fp_mcu_set_time] 2014/08/21 23:15:17 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 01:15:17 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/21 23:34:37 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 01:34:37 
    [video_videomodepreferred_read] mode(0) not found!!!
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 00:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 02:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 00:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 02:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 01:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 03:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 01:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 03:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 02:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 04:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 02:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 04:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 03:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 05:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 03:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 05:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 04:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 06:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 04:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 06:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 05:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 07:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 05:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 07:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 06:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 08:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 06:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 08:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 07:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 09:04:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 07:34:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 09:34:39 
    [fp_mcu_set_time_offset] rtc_offset = 7200 
    [fp_mcu_set_time] 2014/08/22 08:04:39 (rtc_offset = 7200) 
    [fp_mcu_set_time] Set local time => 2014/08/22 10:04:39 
    usb 1-1: new high-speed USB device number 3 using ehci-brcm
    8812au: Unknown symbol rtw_proc_remove_one (err 0)
    8812au: Unknown symbol rtw_proc_init_one (err 0)
    root@atemio5x00:~#
    Hinzugekommen sind nur die letzten drei Zeilen.
    Capt. Bluebaer

  6. Thanks oldfox bedankten sich

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 16:04 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com