Thema: W-LAN geht mit diesem Image nicht auf meiner VU+ UNO

Hallo,

ich hatte vor ein paar Wochen schon mal den Versuch gestartet, die Version 4.2 auf meiner UNO
bzw. VU+ DUO zu installieren, aber schon bei der Aktivierung des W-LAN-Adapters führte es teilweise
zum Einfrieren der UNO Box. Weiterhin kam es immer wieder vor, das der Zugriff auf die Boxen über W-LAN
nicht möglich war.
Daher hatte ich Version 4.1 wieder aufgespielt und die Probleme waren weg.
Heute wieder mit der UNO und dem aktuellsten Image einen neuen Versuch gestartet.
Die Box nach dem Flashen neu gestartet und W-Lan eingerichtet, dann aktiviert und Box eingefroren.
Danach konnte die Box nicht mehr mit dem W-Lan Stick gestartet werden. Zugriff auf die Box nur noch ohne
Stick.
Daher wieder die 4.1 aufgespielt: alles läuft.

Die W-Lan Sticks sind die Originalen von VU+ (150er).

hm... hier müsste man mal schauen welche Treiber geladen werden für den Stick.

Also Telnetkonsole auf... Wifi an die Box und die Befehle
~# dmesg
und
~# lsmod

Eingeben... hie kann man schon mal sehen ob der richtige Treiber erkannt und verwendet wird. Zum 4.2 gab's glaub ich Kerneländerungen ... ergo auch neue Treiber für manche Boxen.

LG Niki

Hallo Niki,
sorry, dass ich erst jetzt antworte, hab im Moment viel um die Ohren ...
Hier nun die Telnet Meldungen:

dmesg

root@optimussos2:~# dmesg
busWidth=1, pageSize=2048B,page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
BrcmNAND mfg ad da Hynix HY27UF082G2A256MB on CS1
Found NAND on CS1: ACC=d3000000,cfg=56052300, flashId=adda9095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0201 256MB@00000000
B4: NandSelect=50000200,nandConfig=56052300, chipSelect=1
brcmnand_read_id: CS1: dev_id=adda9095
After: NandSelect=50000200,nandConfig=56052300
Found NAND flash on Chip Select 1,chipSize=256MB, usable size=256MB, base=0
brcmnand_scan: B4 nand_select =50000200
brcmnand_scan: After nand_select =50000200
usb 2-1: new high-speed USB devicenumber 2 using ehci-brcm
page_shift=11, bbt_erase_shift=17,chip_shift=28, phys_erase_shift=17
Brcm NAND controller version = 2.1 NANDflash size 256MB @10000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50,eccsize=512, writesize=2048
brcmnand_scan, eccsize=512,writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td =bbt_main_descr
Bad block table Bbt0 found at page0001ffc0, version 0x01 for chip on CS1
Bad block table 1tbB found at page0001ff80, version 0x01 for chip on CS1
nand_read_bbt: Bad block at 0x01900000
nand_read_bbt: Bad block at 0x01920000
nand_read_bbt: Bad block at 0x027c0000
nand_read_bbt: Bad block at 0x027e0000
nand_read_bbt: Bad block at 0x06560000
nand_read_bbt: Bad block at 0x08400000
nand_read_bbt: Bad block at 0x08420000
nand_read_bbt: Bad block at 0x0b100000
nand_read_bbt: Bad block at 0x0b120000
Creating 4 MTD partitions on"brcmnand.0":
0x000000000000-0x000002d00000 :"tmtwin"
0x000002d00000-0x00000eb00000 :"rootfs"
0x00000eb00000-0x00000f600000 :"bcmdrv"
0x00000f600000-0x00000ff00000 :"nkernel"
EBI CS0: setting up NOR flash
physmap platform flash device: 00800000at 1f800000
physmap-flash.0: Found 1 x16 devices at0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
Amd/Fujitsu Extended Query Table at0x0040
Amd/Fujitsu Extended Query version1.3.
number of CFI chips: 1
PM: CP0 COUNT/COMPARE frequency dependson divisor
UBI: attaching mtd4 to ubi0
ata2: SATA link down (SStatus 4SControl 300)
UBI: scanning is finished
UBI: attached mtd4 (name "rootfs",size 190 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB),LEB size: 126976 bytes
UBI: min./max. I/O unit sizes:2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned2048), data offset: 4096
UBI: good PEBs: 1515, bad PEBs: 5,corrupted PEBs: 0
UBI: user volume: 1, internal volumes:1, max. volumes count: 128
UBI: max/mean erase counter: 5/1, WLthreshold: 4096, image sequence number: 399053661
UBI: available PEBs: 0, total reservedPEBs: 1515, PEBs reserved for bad PEB handling: 35
ALSA device list:
No soundcards found.
UBI: background thread "ubi_bgt0d"started, PID 55
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0"started, PID 56
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0,name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 186019840 bytes (177MiB, 1465 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0KiB)
UBIFS: media format: w4/r0 (latest isw4/r0), UUID FF607DEC-9A03-4C98-8775-EF776E8D5C49, small LPT model
VFS: Mounted root (ubifs filesystem) ondevice 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 244kfreed
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem withordered data mode. Opts: (null)
core: module_layout: kernel tainted.
Disabling lock debugging due to kerneltaint
[ OPTIMUSS OS2 ]
[Front Version = 119 ]
input: OPTIMUSS OS2 remote control(native) as /devices/virtual/input/input0
OPTIMUSS OS2 Linux DVB BCM73xx CIDriver Release Time (26/11/14)
DVB: registering new adapter(bcmdvb-0)
(NULL device *): DVB: registeringadapter 0 frontend 0 (BCM7335 DVB-S2)...
tunercnt 0 name bcmdvb-0 adapter0
DVB: registering new adapter(bcmdvb-1)
(NULL device *): DVB: registeringadapter 1 frontend 1 (BCM7335 DVB-S2)...
tunercnt 1 name bcmdvb-1 adapter1
DVB: registering new adapter(bcmdvb-2)
>>>vtuner0: register
DVB: registering new adapter(bcmdvb-3)
>>>vtuner1: register
DVB: registering new adapter(bcmdvb-4)
Registering device 'sci', major '238'
Version of smartcard driver: [1.0.0]
usb 2-1: reset high-speed USB devicenumber 2 using ehci-brcm
phy0 -> rt2x00_set_chip: Info -Chipset detected - rt: 5390, rf: 5370, rev: 0502.
ieee80211 phy0: Selected rate controlalgorithm 'minstrel_ht'
usbcore: registered new interfacedriver rt2800usb
NET: Registered protocol family 10
Process Input : 1C DF 3B C5 D4 3A A0 0A04 C7 2F 11
Process Output : 75 94 00 F1 F608 74 A8 9D 8E B7 78

svc: failed to register lockdv1 RPCservice (errno 124).
NFSD: Using /var/lib/nfs/v4recovery asthe NFSv4 state recovery directory
NFSD: starting 90-second grace period(net 8078a800)
Undifined lcd ioctl 1015
DVB CAM0 validated successfully
no vt opened...
path status 0
DVB CAM0 validated successfully
Adding 524284k swap on/media/hdd/swapfile. Priority:-1 extents:3 across:33395708k
- HD_VideoClip out -
phy0 -> rt2x00lib_request_firmware:Info - Loading firmware file 'rt2870.bin'.
phy0 -> rt2x00lib_request_firmware:Info - Firmware detected - version: 0.29.
IPv6: ADDRCONF(NETDEV_UP): wlan0: linkis not ready
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0:link becomes ready
cfg80211: Calling CRDA for country: DE
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update worldregulatory domain
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update worldregulatory domain
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: DE
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update worldregulatory domain
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: send auth to 88:25:2c:21:dd:5f(try 2/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 13 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 13 in queue 0
wlan0: associate with 88:25:2c:21:dd:5f(try 2/3)
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 13 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 13 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 13 in queue 0
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: DE
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: send auth to 88:25:2c:21:dd:5f(try 2/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
wlan0: associate with 88:25:2c:21:dd:5f(try 2/3)
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 8 in queue 0
wlan0: associate with 88:25:2c:21:dd:5f(try 3/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update worldregulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: linkis not ready
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 10 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 10 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 10 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 10 in queue 0
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 10 in queue 0
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: direct probe to88:25:2c:21:dd:5f (try 1/3)
wlan0: send auth to 88:25:2c:21:dd:5f(try 2/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: associate with 88:25:2c:21:dd:5f(try 2/3)
wlan0: associate with 88:25:2c:21:dd:5f(try 3/3)
wlan0: association with88:25:2c:21:dd:5f timed out
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: associate with 88:25:2c:21:dd:5f(try 2/3)
wlan0: associate with 88:25:2c:21:dd:5f(try 3/3)
wlan0: association with88:25:2c:21:dd:5f timed out
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: associate with 88:25:2c:21:dd:5f(try 2/3)
wlan0: associate with 88:25:2c:21:dd:5f(try 3/3)
wlan0: association with88:25:2c:21:dd:5f timed out
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0:link becomes ready
wlan0: deauthenticating from88:25:2c:21:dd:5f by local choice (reason=3)
cfg80211: Calling CRDA to update worldregulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: linkis not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: linkis not ready
wlan0: authenticate with88:25:2c:21:dd:5f
wlan0: send auth to 88:25:2c:21:dd:5f(try 1/3)
wlan0: authenticated
wlan0: associate with 88:25:2c:21:dd:5f(try 1/3)
wlan0: RX AssocResp from88:25:2c:21:dd:5f (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0:link becomes ready
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 0 in queue 2
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 0 in queue 2
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 0 in queue 2
phy0 ->rt2800usb_entry_txstatus_timeout: Warning - TX status timeout forentry 0 in queue 2

lsmod:

root@optimussos2:~# lsmod
Module Size Used by
ipv6 343672 22
rt2800usb 17205 0
rt2800lib 63749 1 rt2800usb
rt2x00usb 10530 1 rt2800usb
rt2x00lib 43595 3 rt2x00usb,rt2800lib,rt2800usb
led_class 2963 1 rt2x00lib
mac80211 336219 3 rt2x00lib,rt2x00usb,rt2800lib
core 6121384 33

Der WLAN-Stick steckt am vorderen Anschluss, auf der Rückseite funktioniert das nicht sauber, wenn es dort kurzzeitg funktioniert, sind die Ping-Zeiten >400ms, dann hängt sich der Resi auf, am vorderen Anschluss, wie gesagt, keine Probleme.

LG
Raina

So ein ähnliches Problem gab es auf den Gigas auch mal... da lag es am Kerneltreiber RT2800

phy0 -> rt2x00_set_chip: Info -Chipset detected - rt: 5390, rf: 5370, rev: 0502.
ieee80211 phy0: Selected rate controlalgorithm 'minstrel_ht'
usbcore: registered new interfacedriver rt2800usb

Dein Stick hat den Chip RT5390, welche auch vom Treiber RT2860sta unterstützt wird.
Schau mal ob es diesen Treiber für dein System gibt und teste den mal. (der RT2800 muss vorher gelöscht werden, sonst läd er lieber diesen. )

per Telnet den Treiber suchen geht mit
~# opkg list |grep 2860

Lg niki