Ergebnis 1 bis 8 von 8
  1. #1
    Senior Mitglied
    Registriert seit
    13.12.2013
    Beiträge
    159
    Thanks (gegeben)
    62
    Thanks (bekommen)
    14
    Total Downloaded
    147,18 MB
    Total Downloaded
    147,18 MB
    ReceiverDanke
    Box 1:
    VU+ Solo 4K
     
     
    Box 2:
    Gigablue HD Quad
     
     
    Box 3:
    VU+ Zero
     
     

    Kein TV Bild nach exit von Media Portal

    Servus,
    habe folgendes Problem .
    Jedesmal wenn ich in Media Portal reingehe kriege ich das Kotzen.
    Ich kann stöbern und blättern durch das Portal wie ich will und wenn ich wieder raus bin also mit Exit habe ich ganz normal das TV Bild wieder.Gehe ich aber irgendwo rein und schaue mir ein Video und will zurück auf den vorher laufenden Sender dann habe ich aufeinmal kein Bild mehr bzw bleibt das Bild schwarz.Ich schalte um usw aber das bringt nichts.Auch wenn ich die Box neustarte habe ich kein erfolg.Ich muss immer warten bis das Bild da ist und das dauert ca.5 min.Ich dachte es liegt an Tuner Einstellungen vielleicht aber,das ist es auch nicht.

    Bin ich der einzige mit diesen Problem ???
    Das habe ich seit 4.0, vorher mit 3.0 hatte ich das nicht
    Die Box ist eine Gigablue Quad

    •   Alt Advertising

       

  2. #2
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Also das Problem hab ich nicht und hab auch noch nichts davon gelesen. Vielleicht mal mitloggen.

    telnet/putt

    Code:
    init 2
    enigma2
    jetzt dein Problem nachstellen und den putty log posten

    Code:
    init3
    damit E2 wieder normal lauft

  3. #3
    Senior Mitglied
    Registriert seit
    13.12.2013
    Beiträge
    159
    Thanks (gegeben)
    62
    Thanks (bekommen)
    14
    Themenstarter
    Total Downloaded
    147,18 MB
    Total Downloaded
    147,18 MB
    ReceiverDanke
    Box 1:
    VU+ Solo 4K
     
     
    Box 2:
    Gigablue HD Quad
     
     
    Box 3:
    VU+ Zero
     
     
    Code:
    Trying 192.168.178.55...
    Code:
    Connected to gbquad.fritz.box.
    Escape character is '^]'.
    
    
    
    
    Welcome to openATV for gbquad
    
    
    openatv 4.0 gbquad
    
    
    
    
    
    
    
    
    gbquad login: root
    dreambox
    root@gbquad:~# dreambox
    -sh: dreambox: command not found
    root@gbquad:~# init 2
    root@gbquad:~# enigma2
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    24300k video mem
     - double buffering available!
    17100kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    + (9) gLCDDC
    lcd buffer 0x7cb798 77440 bytes, stride 440
    LCD resolution: 220 x 176 x 16 (stride: 440)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "gigablue remote control" is a mouse
    Found 1 input devices.
    + (22) Hdmi CEC driver
    eHdmiCEC: detected physical address change: 1000 --> 1100
    eHdmiCEC: send message 84 11 00 03 
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    eDVBCIInterfaces->setInputSource(2, 2)
    eDVBCIInterfaces->setInputSource(3, 3)
    done, found 2 common interface slots
    + (35) CA handler
    + (36) Stream server
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 112 channels/transponders and 1719 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    opening frontend 1
    close frontend 1
    opening frontend 2
    close frontend 2
    boxtype detection via /proc/stb/info not possible... use fallback via demux count!
    
    
    found 1 adapter, 3 frontends(3 sim) and 5 demux, boxtype 4
    Use valid Linux Time :) (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
    found 6 spinner!
    executing main
    setIoPrio best-effort level 3 ok
    Failed to open /dev/dbox/fp0
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    [Harddisk] enumerating network mounts...
    Reading satellites.xml
    Reading cables.xml
    Reading terrestrial.xml
    removing internal link on frontend id 0
    removing internal link on frontend id 1
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    setSlotInfo for dvb frontend 2 to slotid 2, descr GIGA DVB-C/T NIM (SI), need rotorworkaround No, enabled Yes, DVB-S2 No
    slot: 0 configmode: simple
    diseqcmode:  single
    slot: 1 configmode: simple
    diseqcmode:  single
    sec config completed
    [NimManager] slot name=BCM7356 DVB-S2 NIM (internal)
    [NimManager] multiType = True
    [NimManager] slot name=BCM7356 DVB-S2 NIM (internal)
    [NimManager] multiType = True
    [NimManager] slot name=GIGA DVB-C/T NIM (SI)
    [NimManager] multiType = True
    tuner type is already already 0
    [Picon] adding path: /media/hdd/picon/
    [Picon] adding path: /media/hdd/usr/share/enigma2/picon/
    main thread is non-idle! display spinner!
    [Time By]: Transponder
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
    [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language Deutsch
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    cannot open /proc/stb/avs/0/colorformat
    [VideoMode] setting scaler_sharpness to: 00000005
    [VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
    [EPGC Load] Poller disabled.
    [EPGC Save] Poller disabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    couldn't open /proc/stb/misc/12V_output
    setLCDBrightness 25
    setLCDBrightness 127
    setLCDScrollspeed 150
    setLCDRepeat 3
    setLCDMode 1
    Setting OSD position: 0 720 0 576
    Setting OSD alpha: 255
    Setting 3D mode: auto
    Setting 3D depth: 50
    [EPGC Save] Poller disabled.
    [EPGC Load] Poller disabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    [EPGC] 18639 events read from /etc/enigma2/epg.dat
    Module 'mechanize' loaded
    Twisted Agent in use (12, 0, 0)
    Module 'ast' loaded
    Module 'mechanize' loaded
    [Ipkg] Added to OPKG destinations: /media/hdd
    [Ipkg] Added to OPKG destinations: /
    [Info-Panel] machinebrand: GigaBlue
    [Info-Panel] machinename: Quad
    [Info-Panel] oem name: gigablue
    [Info-Panel] boxtype: gbquad
    Plugin  Extensions/WebInterface failed to load: No module named plugin
    [AirPlayer] search for Skins
    [AirPlayer] found Skin Classic
    [AirPlayer] using skin  /usr/lib/enigma2/python/Plugins/Extensions/AirPlayer/Skins/Classic/1280x720/skin.xml
    [AirPlayer] running python  sys.version_info(major=2, minor=7, micro=3, releaselevel='final', serial=0)
    [AirPlayer] Checking for usable AzBox service ... 
    no
    
    
    [AirPlayer] Checking for usable gstreamer service ... 
    yes
    
    
    [AirPlayUpdater] vumodel: vu+ultimo
    [AirPlayUpdater] boxtype: gigablue
    [AirPlayUpdater] model: gigablue
    [AirPlayUpdater] vumodel: vu+ultimo
    [AirPlayUpdater] boxtype: gigablue
    [AirPlayUpdater] model: gigablue
    IPTV-List-Updater set language to de
    --> setting contrast to: 00008000
    --> setting saturation to: 00008000
    --> setting hue to: 00008000
    --> setting brightness to: 00008000
    --> setting block_noise_reduction to: 00000000
    --> setting mosquito_noise_reduction to: 00000000
    --> setting digital_contour_removal to: 00000000
    --> setting splitmode to: off
    --> setting sharpness to: 00010000
    --> setting auto_flesh to: 00000000
    --> setting green_boost to: 00000000
    --> setting blue_boost to: 00000000
    --> setting dynamic_contrast to: 00000003
    --> setting color_soace to: Edid(Auto)
    --> applying pep values
    [AutoTimer] Auto Poll Enabled
    [CI_Assignment] activating ci configs:
    [CI_Activate] FOUND 2 CI Slots 
    [CI_Activate_Config_CI0] no config file found
    [CI_Activate_Config_CI0] error parsing xml...
    [CI_Activate_Config_CI1] no config file found
    [CI_Activate_Config_CI1] error parsing xml...
    [VFD-GIGA] sessionstart
    starting hotplug handler
    [Timer] Record RecordTimerEntry(name=Sportschau live, begin=Wed Mar  5 20:12:00 2014, serviceref=1:0:19:283D:3FB:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=Sportschau Club, begin=Wed Mar  5 23:12:00 2014, serviceref=1:0:19:283D:3FB:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=Sportschau live, begin=Wed Mar  5 21:39:00 2014, serviceref=1:0:19:283D:3FB:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    setLCDBrightness 127
    [NAVIGATION] USE DEEPSTAND-WORKAROUND FOR THIS BOXTYPE (gbquad) !!
    ==================================================================================
    [NAVIGATION] getNextRecordingTime= -1
    [NAVIGATION] nextRecordTimerAfterEventActionAuto= False
    [NAVIGATION] current Time=1394185940.14
    [NAVIGATION] timediff=1394185941.14
    ==================================================================================
    [NAVIGATION] getNextPowerManagerTime= -1
    [NAVIGATION] nextPowerManagerAfterEventActionAuto= False
    [NAVIGATION] current Time=1394185940.14
    [NAVIGATION] timediff=1394185941.14
    ==================================================================================
    [NAVIGATION] wasTimerWakeup = False
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    EMC: +++ EMC V3.7.4beta20131015 startup
    [VFD-GIGA] sessionstart
    [VFD-GIGA] Starting !!
    [VFD-GIGA] initializing
    [VFD-GIGA] initVFD box = gbquad
    sh: /proc/stb/fp/display_clock: No such file or directory
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Fr 07 Mär 2014 10:52:20 CET
    warning, skin is missing element key_yellow in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element key_blue in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element key_green in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element key_red in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    [SKIN] No skin to read...
    [SCREENNAME]  RdsInfoDisplaySummary
    warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
    warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
    RemovePopup, id = ZapError
    warning, skin is missing element key_blue in <class 'Screens.InfoBar.InfoBar'>
    warning, skin is missing element key_red in <class 'Screens.InfoBar.InfoBar'>
    warning, skin is missing element key_green in <class 'Screens.InfoBar.InfoBar'>
    warning, skin is missing element key_yellow in <class 'Screens.InfoBar.InfoBar'>
    [SCREENNAME]  RdsInfoDisplay
    halign must be either left, center, right or block!, not Left. Please contact the skin's author!
    halign must be either left, center, right or block!, not Left. Please contact the skin's author!
    [SCREENNAME]  InfoBarSummary
    [SCREENNAME]  InfoBar
    setValue 100
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    lastshutdown=False              (True = last shutdown was OK)
    NOK shutdown action=normal
    bootup action=normal
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/home/root/logs']
    [LogManager] looking in: /home/root/logs
    playing 1:0:1:445D:453:1:C00000:0:0:0:
    [SCREENNAME]  InfoBar
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 0453:0001
    opening frontend 0
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1944 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:1:445D:453:1:C00000:0:0:0:
    allocate demux
    child has terminated
    pipes closed
    child has terminated
    pipes closed
    poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
    child has terminated
    pipes closed
    child has terminated
    pipes closed
    poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    [SEC] set static current limiting
    set sequence pos 3
    set sequence pos 4
    [SEC] setVoltage 2
    [SEC] sleep 200ms
    child has terminated
    pipes closed
    12.8.0.
    poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
    child has terminated
    pipes closed
    0.0.0.0
    192.168
    ER plugin not found
    [OpenWebif] loading external plugins...
    [OpenWebif] no plugins to load
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    [AirPlayer] found network dev tap0
    [AirPlayer] found network dev eth0
    [AirPlayer] starting AirPlayer version 0.4.1  on  mips32el
    [AirPlayer] starting webserver
    [AirPlayer] init Backend
    [AirPlayer] init E2MediaBackEnd
    [AirPlayUpdater] reading interface
    [AirPlayUpdater] running on interface  ac:db:ee:11:22:30
    [AirPlayUpdater] vumodel: vu+ultimo
    [AirPlayUpdater] boxtype: gigablue
    [AirPlayUpdater] model: gigablue
    [AirPlayUpdater] running on model: gigablue
    [AirPlayUpdater] check validation
    [AirPlayUpdater] validationKey habe ich gelöscht
    [AirPlayer] using ServiceID:  4097
    [AirPlayer] init protocol handler
    [AirTunes] loading lib done
    [AirPlayer] check for updates
    [AirPlayer] update:  up to date
    [AirPlayer] starting protocol hadler
    [AirPlayer] starting webserver done
    [AirPlayer] starting zeroconf
    killall: zeroconfig: no process killed
    [AirPlayer] starting zeroconf done
    poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
    Setting up airplay service AirPlayer E2 for host ACDBEE112230 IP: 192.168.178.55 Mac: AC:DB:EE:11:22:30 Device: eth0
    createSocket ->
    createSocket <-
    createResponsePacket ->
    createResponsePacket <-
    createResponsePacket ->
    createResponsePacket <-
    createResponsePacket ->
    createResponsePacket <-
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [CAMSTARTER] Start/Check: 1
    2014-03-07 10:52:22.183879
    [CAMSTARTER] CAM 1 is Running, active cam 1: Oscam 8608
    [CAMSTARTER] Cam is running, exit camstarter
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1f, inversion off, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x26b48e0 running
    [eEPGCache] channel 0x26b48e0 running
    stop release channel timer
    [EPGC] next update in 2 sec
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (01ff), and 1 audio stream(s) (0200), and the pcr pid is 01ff, and the text pid is 0021
    allocate demux
    TuxTxt cache cleared
    decoder state: play, vpid=511, apid=512
    DMX_SET_PES_FILTER(0x1ff) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x200) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(1) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 0 - ok
    DMX_SET_PES_FILTER(0x1ff) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x21) - ttx - ok
    DEMUX_START - ttx - ok
    TuxTxt cache cleared
    TuxTxt: initialized
    TuxTxt service started 21
    VIDEO_SLOWMOTION(0) - ok
    TuxTxt running thread...(021)
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    AUDIO_CHANNEL_SELECT(0) - ok
    disable teletext subtitles page ffffffffffffffff (und)
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 100
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:1:445D:453:1:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:1:445D:453:1:C00000:0:0:0:
    RemovePopup, id = ZapError
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    PATready
    use pmtpid 0061 for service_id 445d
    eventNewProgramInfo 0 0
    getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
    have 1 video stream(s) (01ff), and 2 audio stream(s) (0200, 0203), and the pcr pid is 01ff, and the text pid is 0021
    decoder state: play, vpid=511, apid=512
    getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 100
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    [SEC] set dynamic current limiting
    [Dish] tuning failed
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    AITready
    [eDVBLocalTimerHandler] diff is -1
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] set RTC Time
    [eDVBLocalTimerHandler] update RTC
    [eDVBLocalTimerHandler] time update to 10:52:22
    [eDVBLocalTimerHandler] m_time_difference is -1
    [eDVBLocalTimerHandler] set Linux Time
    sdt update done!
    [EPGC] start caching events(1394185943)
    EMC: Setting EPG language: de_DE
    [VLC] Checking for buildin servicets ...  no
    [VLC] Checking for existing and usable servicets.so ...  No module named servicets
    [VLC] Checking for usable gstreamer service ...  yes
    EMC: Next trashcan cleanup in 848 minutes
    [VFD-GIGA] delay init on boot
    [VFD-GIGA] initVFD box = gbquad
    sh: /proc/stb/fp/display_clock: No such file or directory
    EMC delPathFromCache /hdd/movie/trashcan
    EMC: [EMCMS] trashcan cleanup: nothing to delete...
    [EPGC] abort non avail schedule other reading
    [EPGC] abort non avail netmed schedule reading
    [EPGC] abort non avail netmed schedule other reading
    [EPGC] abort non avail FreeSat schedule_other reading
    [EPGC] abort non avail viasat reading
    [EPGC] nownext finished(1394185950)
    [EPGC] schedule finished(1394185960)
    [EPGC] stop caching events(1394185960)
    [EPGC] next update in 60 min
    Geändert von Papi2000 (07.03.2014 um 11:20 Uhr) Grund: bitte als Code oder Anhang. Und Schrift auf auto lassen.

  4. #4
    Senior Mitglied
    Registriert seit
    13.12.2013
    Beiträge
    159
    Thanks (gegeben)
    62
    Thanks (bekommen)
    14
    Themenstarter
    Total Downloaded
    147,18 MB
    Total Downloaded
    147,18 MB
    ReceiverDanke
    Box 1:
    VU+ Solo 4K
     
     
    Box 2:
    Gigablue HD Quad
     
     
    Box 3:
    VU+ Zero
     
     
    Jetzt ist schon wieder die Box mit greenscreen abgeschmiert.Ich habe eine Aufnahme beenden wollen.Bei Neustart braucht die Box 2-3 min bis Bild da ist

  5. #5
    Senior Mitglied
    Registriert seit
    13.12.2013
    Beiträge
    159
    Thanks (gegeben)
    62
    Thanks (bekommen)
    14
    Themenstarter
    Total Downloaded
    147,18 MB
    Total Downloaded
    147,18 MB
    ReceiverDanke
    Box 1:
    VU+ Solo 4K
     
     
    Box 2:
    Gigablue HD Quad
     
     
    Box 3:
    VU+ Zero
     
     
    Niemand eine Idee ?
    Ausserdem ist die Box seit 4.0 sehr träge beim zappen.Ist das normal oder bereits bekannt?

  6. #6
    Avatar von madie
    Registriert seit
    05.04.2013
    Beiträge
    481
    Thanks (gegeben)
    1409
    Thanks (bekommen)
    3257
    Total Downloaded
    295,50 MB
    Total Downloaded
    295,50 MB
    ReceiverDanke
    Box 1:
    AX HD51
     
     
    wozu ne Idee? du schreibst du bekommst ein gs, aber hängst ihn nicht an. nur mit der glaskugel ist das seeeehr schwierig.
    Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]

  7. #7
    Senior Mitglied
    Registriert seit
    13.12.2013
    Beiträge
    159
    Thanks (gegeben)
    62
    Thanks (bekommen)
    14
    Themenstarter
    Total Downloaded
    147,18 MB
    Total Downloaded
    147,18 MB
    ReceiverDanke
    Box 1:
    VU+ Solo 4K
     
     
    Box 2:
    Gigablue HD Quad
     
     
    Box 3:
    VU+ Zero
     
     
    Eine Idee zu den oben eingefügten log?

  8. #8
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Das ist schon gefixed denke ich, versuch mal aktuelles Image

  9. Thanks kosovari bedankten sich

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 23:01 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com