Thanks Thanks:  7
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 12
  1. #1
    Anfänger
    Registriert seit
    28.12.2016
    Beiträge
    27
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten

    sf8008 4/1 DiSEqC switch error

    Hi

    It seems i have a problem with my diseqc switch and my sf8008.

    My setup has been working fine and still does if i connect it back to my vu+

    Iv configured my tuners correctly and have checked many times but i can not lock on to some channels and the signal is poor

    With 30w test the best i can get is 54 snr and 7 agc now if i connect the dish straight from 30w with no switch i get 69 snr and 99 agc
    I did read some other people had the same issue but i just cant seem to get it to work.

    The other strange thing i see is sometime i get the full signal and agc that i see on my vu+ on the sf8008 but the channel will not lock, I then try another channel and it locks in but again 54snr 7 agc, then going back to the first channel its 50/50 chance it will lock and if it does the same 54snr 7agc
    Really dont want to send the box back without asking for some help.

    Like i said this is nothng to do with my set up or how i configured it


    I have installed 6.3 6.2 hdf and all latest images and updates

    I will test any drivers to see if it will resolve my errors

    Kind regards

    Jason

    •   Alt Advertising

       

  2. #2
    Anfänger
    Registriert seit
    28.12.2016
    Beiträge
    27
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    sf8008 30 w
    Manual scan with DiSEqC switch 229 chanels
    Manual scan without DiSEqC 606 channels

    Vu+ solo se 30w
    Manual scan with DiSEqC switch 586 channels
    Manual scan without DiSEqC switch 596 channels

    If i cant get any help then il have to send the box back, tbh this is the first box ever that iv had problems with from the start,

    Shame box has greats specs

  3. Thanks Old bedankten sich
  4. #3
    Senior Mitglied
    Registriert seit
    19.08.2015
    Beiträge
    107
    Total Downloaded
    5,78 MB
    Total Downloaded
    5,78 MB
    ReceiverDankeAktivitäten
    Box 1:
    Octagon SF8008 4K
     
     
    Box 2:
    Azbox Me
     
     
    Box 3:
    Azbox MiniMe
     
     
    Perhaps a compatibility problem between this diseqc and the new receiver, i have a diseqc 2.0 4/1 with this receiver and no problems.
    Put here some photos of the settings you have on the receiver.

  5. #4
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    12.599
    Total Downloaded
    593,12 MB
    Total Downloaded
    593,12 MB
    ReceiverDankeAktivitäten
    Box 1:
    GB Q4K-SC / UE4K-SC / UE4K-C
     
     
    Box 2:
    GigaBlue Q-SSC / Q+-SSC
     
     
    Box 3:
    DM900uhd-SS / Vu+Duo
     
     
    Box 4:
    E4HD FormF3 AX Triplex VIP2-CC
     
     
    Box 5:
    diverse andere . . .
     
     
    Zitat Zitat von Ja5 Beitrag anzeigen
    sf8008 30 w
    Manual scan with DiSEqC switch 229 chanels
    Manual scan without DiSEqC 606 channels

    Vu+ solo se 30w
    Manual scan with DiSEqC switch 586 channels
    Manual scan without DiSEqC switch 596 channels
    ...
    Have you thought about the fact, that you get 4 different results with two receivers and two connect-setups? I would try to figure out, what's going wrong with the receiption itself.
    Grüßle
    Ralf
    ------------------------------------------------------------------------------------------------------------------------
    Gigablue Quad 4K-multi,Quad+-SSC,Quad-SSC, andere Gigas, Astra 19.2E, UniCable & KabelBW, oATV/ teamBlue
    (weitere: DM900uhd,Vu+Duo,Technisat,Edision),PC-DVB-S/C/T,PCH-A110,Xtreamer,BDP5200
    UE32C5700,UE65HU7590,LG42R51
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  6. #5
    Anfänger
    Registriert seit
    28.12.2016
    Beiträge
    27
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Thanks for the reply but my setup is correct

    the vu+ didnt find 10 channels and the sf8008 didnt find over 370 channels and cant lock channels.

    Seems to me that the sf8008 doesnt like 1 of my diseqc switchs i read the issue like this before.

  7. #6
    Anfänger
    Registriert seit
    28.12.2016
    Beiträge
    27
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von vladim Beitrag anzeigen
    Perhaps a compatibility problem between this diseqc and the new receiver, i have a diseqc 2.0 4/1 with this receiver and no problems.
    Put here some photos of the settings you have on the receiver.
    Hi vladim

    Thanks for the reply

    Iv checked to see if i can find out with switches i have. Octagon Optima 4 Port DiSEqC Switch is working fine the other is either a TECHNOMATE TM-4S or its the Golden Media tbh i think its the Golden Media

    I wish could go and check my my health issues doesnt allow me.

  8. #7
    Senior Mitglied
    Registriert seit
    19.08.2015
    Beiträge
    107
    Total Downloaded
    5,78 MB
    Total Downloaded
    5,78 MB
    ReceiverDankeAktivitäten
    Box 1:
    Octagon SF8008 4K
     
     
    Box 2:
    Azbox Me
     
     
    Box 3:
    Azbox MiniMe
     
     


    I have one this.

  9. Thanks Ja5 bedankten sich
  10. #8
    Anfänger
    Registriert seit
    28.12.2016
    Beiträge
    27
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    My problem is one works fine and seems the other doesnt, But both work on the vu+
    I wish i could just buy another and replace it but my setup is high and need ladder etc,

    hopefully someone from Octagon will read this and offer a fix

  11. Thanks Old bedankten sich
  12. #9
    Senior Mitglied
    Registriert seit
    19.08.2015
    Beiträge
    107
    Total Downloaded
    5,78 MB
    Total Downloaded
    5,78 MB
    ReceiverDankeAktivitäten
    Box 1:
    Octagon SF8008 4K
     
     
    Box 2:
    Azbox Me
     
     
    Box 3:
    Azbox MiniMe
     
     
    And if you try a clean install of last openatv 6.2 in the receiver without multiboot...

  13. #10
    Anfänger
    Registriert seit
    28.12.2016
    Beiträge
    27
    Themenstarter
    Total Downloaded
    15,56 MB
    Total Downloaded
    15,56 MB
    ReceiverDankeAktivitäten
    Did that yesturday again 6.2 in fresh install too and is upto date. Tbh doesnt matter what image i try it seems to be the same.

    But again thanks for taking the time to reply

  14. Thanks Old bedankten sich

Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 00:58 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2019 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 10,53%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com