Thema: T2-MI (T2MI) PLP Direkt Scan Support OCTAGON SF8008

Klingt ja gut aber geht denn der Blindscan nach T2MI-Signalen wirklich schon mit OpenATV? Meine Box findet auf 40 Ost im C-Band nix mit T2 wie im Screenshot zu sehen. Aktuellste OpenATV 6.3 ist installiert. Muss noch was geändert werden?

Zitat von esmos

T2-MI (T2MI) PLP Direkt Scan Support OCTAGON SF8008 Posting Nummer 40

Der Link ist leider veraltet, die Datei ist abgelaufen (((

Zitat von esmos

brauchst du nicht, T2-MI support ist in den aktuellen images entahlten. brauchst du nicht separat zu installieren.

So try to make a blindscan to see if anything appears from multistream transponder...

Just made a blindscan on 4.8E and here's the result:
(Nordic transponders are not available where I am)

From the two multistream transponders it only found one (12341 H), and after scanning could only find channels from stream 40 which is not T2-MI. I had to manually scan the other stream 30 with T2-MI enabled to find the remaining channels.
The other multistream transponder (12188 H) could not be found even with manual scan. I could not get any signal from it, which is very unlikely.
Also, the first (normal) transponder (11747 V) could not be detected again, as is the case with most of the satellites in my system. I had to manually scan it as well.

Here's the log:

Astra 4.8e 12188 H 30000, 12341 H 30000 T2-MI, stream 10, 20, 30 was encoded and the channels stopped scanning. Please make new images so that the channels are scanned.

Don't ask for the impossible. Since there is no free pid visible now to get the T2MI info nothing can be done anymore, plain and simple!

Στάλθηκε από το Redmi Note 5 μου χρησιμοποιώντας Tapatalk

But on these channels I now have an up-to-date EPG. So it turns out all the same, they can be scanned?