Thema: Motorized Dish

Hello,

I have a problem with motorized dish USALS & Octagon SF4008 OpenATV6 - 2xDVB-S2X + DVB-T2.

Tuner A = Diseqc 1.1 => 10 LNB => 52.0, 45.0, 42.0, 39.0, 28.2, 23.5, 19.2, 13.0 and 0.8, 5.0 west.
Tuner B = USALS 68.5 east => 45.0 west
Tuner C = DVB-T

1) If the motororized dish is on the 9.0 east (tuner B), I choose a channel on the 4.8 east (tuner B) no problem the motor move.

2) If the motororized dish is on the 9.0 east (tuner B), I choose a channel on the 13 east (tuner A) the Tuner A is active and the reception is ok, but now if I want go to a channel on the 4.8 east (tuner B) the motor don't move. It have to choose a channel on the 9.0 east and after that I can go to the 4.8 east..
.
3) If the motororized dish is on the 9.0 east (tuner B), I choose a DVB-T channel (tuner C) the Tuner C is active and the reception is ok, but now if I want go to a channel on the 4.8 east (tuner B) the motor don't move. It have to choose a channel on the 9.0 east and after that I can go to the 4.8 east...

This installation and configuration work fine since a few years with : Vu+Ultimo, ET10000, Solo4K.
This bug is present since I have this Octagon (february).

Sorry for my poor english and thanks for reply.

Hi esmos,

Could you transmit this problem to Octagon.

Thanks
Regards

Hi,
Without reaction, I resume,
Tuner A = Advanced = Diseqc 1.1 => 10 LNB => 52.0-45.0-42.0-39.0-28.2-23.5-19.2-13.0 east & 0.8-5.0 west.
Tuner B = Simple = USALS => 68.5 east => 45.0 west
Tuner C = DVB-T
Octagon SF4008 Image OpenATV or Stable SatDreamGr
Motor on 9°east tuner B signal ok channel open
goto a channel on 5°east tuner B => ok
goto a channel on 9°east tuner B => ok
goto a channel on 5°west TUNER A => ok
goto a channel on 5°east tuner B => motor don't move
goto a channel on 9°east tuner B => after 2 seconds signal ok channel open
goto a channel on 7°east tuner B => ok
goto a channel on 5°west TUNER A => ok
goto a channel on 10°east tuner B => motor don't move
goto a channel on 7°east tuner B => after 2 seconds signal ok channel open
etc...
--------------------------------------------------------------------------
Same tests as above with setting (etc/enigma2) modified :
replace "config.Nims.1.powerMeasurement=false" by "config.Nims.1.powerMeasurement=true"
Motor on 9°east tuner B signal ok channel open
goto a channel on 5°east tuner B => ok
goto a channel on 9°east tuner B => ok
goto a channel on 5°west tuner A => ok
goto a channel on 5°east tuner B => ok
goto a channel on 9°east tuner B => ok
goto a channel on 7°east tuner B => ok
goto a channel on 5°west tuner A => ok
goto a channel on 10°east tuner B => ok
goto a channel on 7°east tuner B => ok
etc...
All work fine...except no popup when dish is moving and location motor value in infobar not right, always the same.
Could you report this problem to manufacturer.
This installation and configuration (not modified) work fine since a few years with : DM7025, Ultimo4K, ET10000 and Solo4K.
Thanks.

Hi,

Always same issue with new kernel :"sf4008-drivers-4.1.37-6.3.0-20180328"!

Hi,
Always same issue with new kernel : "sf4008-drivers-4.1.37-6.3.0-20180328" !