Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 11
  1. #1
    Anfänger
    Registriert seit
    25.04.2019
    Beiträge
    13
    Thanks (gegeben)
    5
    Thanks (bekommen)
    1
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke

    WLAN Stick help which drivers

    Hello, i got this wlan stick.
    Mini WIFI WLAN Wireless Adapter Stick USB 2.0 802.11n Dongle 150Mbit IEEE 3211n. | eBay

    WLAN Stick help which drivers-stypucq.pngWLAN Stick help which drivers-ogmgtjs.png

    Which drivers do i need for it? Because i cant get it to work sadly. Thank you.


    lsusb says:
    Bus 001 Device 002: ID 148f:7601

    So it should be this driver?
    GitHub - kuba-moo/mt7601u: Linux mac80211-based driver for Mediatek MT7601U USB bgn WiFi dongle

    How can i compile it for e2?




    Tried this driver:
    enigma2-plugin-drivers-network-usb-mt7601u - 1.0-r0 - mediatek 7601u
    Geändert von brabrta543 (26.05.2020 um 15:53 Uhr)

    •   Alt Advertising

       

  2. #2
    satfreund
    Gast
    Why do users constantly buy a WiFi USB stick ( for 2.99 Euro from the China Man) without first knowing whether the part
    runs under OpenATV and on its box ?
    Have you tested it due plug into your Box and nothing happend ?

    So buy this : Anadol AWL150 150Mbit/s USB WLAN Stick mit 3dBi schwenkbarer Antenne schwar
    That will do the trick !


  3. Thanks brabrta543 bedankten sich
  4. #3
    Avatar von laptan
    Registriert seit
    25.08.2013
    Ort
    openATV
    Beiträge
    1.814
    Thanks (gegeben)
    1393
    Thanks (bekommen)
    706
    Total Downloaded
    29,18 MB
    Total Downloaded
    29,18 MB
    ReceiverDanke
    Box 1:
    uniBOX HD 1 PLUS
     
     
    Box 2:
    VU+ Zero
     
     
    Box 3:
    AX Triplex
     
     
    Box 4:
    MEGASAT Force 1 Plus
     
     
    Box 5:
    OS Mio 4K +
     
     
    A suitable driver must be installed, to use this Wifi Stick.
    Before doing this, you have to find out the chipset of the Wifi Stick.
    On your remote control use the green button and then the green button again, search in the drivers section if you can find and install this chipset driver. If there is no driver for this chipset, you can unfortunately not use this Wifi Stick.


    Receiver I: OS Mio 4K +
    Receiver II:
    Ax Triplex

    Receiver III: VU+ Zero
    Receiver IV: MEGASAT Force 1+




  5. Thanks brabrta543 bedankten sich
  6. #4
    Anfänger
    Registriert seit
    25.04.2019
    Beiträge
    13
    Thanks (gegeben)
    5
    Thanks (bekommen)
    1
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Hey, i found the correct driver. (Ralink MT7601U same deviceid as mine)

    But it shows in log:

    rtusb init rt2870 --->
    ===>rt2870_probe()!
    --> RTMPAllocAdapterBlock


    === pAd = e7063000, size = 842296 ===

    --> RTMPAllocTxRxRingMemory
    ---> RTMPFreeTxRxRingMemory
    ERROR!!! Failed to allocate memory - TxRxRing
    rt2870: probe of 1-1:1.0 failed with error -1


    Edit: Or its probably not the correct driver.. i wait for a response to which chipset is build in. I already got the usb months ago before i bought e2 receiver. so i thought i could re use it.
    Geändert von brabrta543 (26.05.2020 um 16:26 Uhr)

  7. #5
    +Independent Advisor+
    Registriert seit
    17.06.2013
    Beiträge
    2.177
    Thanks (gegeben)
    86
    Thanks (bekommen)
    1144
    Total Downloaded
    128,09 MB
    Total Downloaded
    128,09 MB
    ReceiverDanke
    MT7601 is support and driver seems to work.

    Problem is allocate memory. It needs some memory from the box and this is not reserved. Probably it need to add +- 2MB for some devices to work well.
    This should been add in kernel and probably Captain can add it for the model.
    !Deutsch ist nicht meine mutter sprache, so sprachfehler kann auftreten!

    ZGemma H10Combo: TRANSCODING H265 - KODI - HBBTV - DVB-S2x - DVB-CT2 -PiP uHD
    TOP3:
    ZG H10Combo, Mut@nt/AX HD51, Axas E4HD



  8. Thanks laptan, brabrta543 bedankten sich
  9. #6
    Anfänger
    Registriert seit
    25.04.2019
    Beiträge
    13
    Thanks (gegeben)
    5
    Thanks (bekommen)
    1
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Is it maybe possible to do it by myself?

    Thanks

  10. #7
    Avatar von laptan
    Registriert seit
    25.08.2013
    Ort
    openATV
    Beiträge
    1.814
    Thanks (gegeben)
    1393
    Thanks (bekommen)
    706
    Total Downloaded
    29,18 MB
    Total Downloaded
    29,18 MB
    ReceiverDanke
    Box 1:
    uniBOX HD 1 PLUS
     
     
    Box 2:
    VU+ Zero
     
     
    Box 3:
    AX Triplex
     
     
    Box 4:
    MEGASAT Force 1 Plus
     
     
    Box 5:
    OS Mio 4K +
     
     
    I've added the information about the findings in post #5, to our internal chat room. I wait for response, I'll keep you informed.


    Receiver I: OS Mio 4K +
    Receiver II:
    Ax Triplex

    Receiver III: VU+ Zero
    Receiver IV: MEGASAT Force 1+




  11. Thanks brabrta543 bedankten sich
  12. #8
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke
    edit /boot/STARTUP file

    example from hd61 add coherent_pool=2M

    bootcmd=setenv bootargs $(bootargs) $(bootargs_common); mmc read 0 0x1000000 0x3BD000 0x8000; bootm 0x1000000; run bootcmd_fallback
    bootargs=root=/dev/mmcblk0p23 rootsubdir=linuxrootfs1 rootfstype=ext4 kernel=/dev/mmcblk0p19 coherent_pool=2M

    to check it after boot

    root@ax61:~# cat /proc/cmdline
    root=/dev/mmcblk0p23 rootsubdir=linuxrootfs1 rootfstype=ext4 kernel=/dev/mmcblk0p19 coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M( bootargs),18M(recovery),2M(bootoptions),2M(devicei nfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastpl ay),20M(kernel),20M(trustedcore),4M(misc),1024M(sy stem),150M (vendor),306M(dvb),256M(cache),50M(private),8M(sec urestore),16M(linuxkernel1),16M(linuxkernel2),16M( linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=1961M mmz=ddr,0,0,48M vmalloc=500M


    openATV we are open Source

    Boykott GPL violator

  13. Thanks laptan, brabrta543, WTE bedankten sich
  14. #9
    Anfänger
    Registriert seit
    25.04.2019
    Beiträge
    13
    Thanks (gegeben)
    5
    Thanks (bekommen)
    1
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Thanks for the support. The driver starts now correctly. If i choose a wlan using the gui, it get frozen at activating...

    If i do it using cmd

    "wpa_supplicant -B -iwlan0 -c /etc/wpa_supplicant.wlan0.conf -D mt7601u,wext"

    i get segmentation fault.




    But i think i found the real problem, the chipset is this one: Realtek RTL8188FTV thats probably the reason for it. And i think there is no driver for it atm. so i will probably just buy another wlan stick.

  15. #10
    +Independent Advisor+
    Registriert seit
    17.06.2013
    Beiträge
    2.177
    Thanks (gegeben)
    86
    Thanks (bekommen)
    1144
    Total Downloaded
    128,09 MB
    Total Downloaded
    128,09 MB
    ReceiverDanke
    I know I tried in past as well the Realtek RTL8188FTV as this is very common built-in in cheap android boxes.

    lsusb says:
    Bus 001 Device 002: ID 148f:7601

    Maybe wrong ID? There is an 8188 driver as well. However the ID should then been assigned to it.

    Very curious as it are two total different companies mediatek and RTL8188FTV.


    wpa_supplicant -B -iwlan0 -c /etc/wpa_supplicant.wlan0.conf -D mt7601u,wext

    better use
    wpa_supplicant -B -iwlan0 -c /etc/wpa_supplicant.wlan0.conf -Dnl80211
    Geändert von WTE (28.05.2020 um 14:43 Uhr)
    !Deutsch ist nicht meine mutter sprache, so sprachfehler kann auftreten!

    ZGemma H10Combo: TRANSCODING H265 - KODI - HBBTV - DVB-S2x - DVB-CT2 -PiP uHD
    TOP3:
    ZG H10Combo, Mut@nt/AX HD51, Axas E4HD




Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 11:55 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,26%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com