Ergebnis 1 bis 10 von 10
-
31.08.2015, 09:57 #1
- Registriert seit
- 29.08.2015
- Beiträge
- 6
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 2
- Total Downloaded
- 754,7 KB
- Total Downloaded
- 754,7 KB
MegaSat Force 1 Plus freezes at boot and lose signal
Hello.
Last week I got 2 MegaSat Force 1 Plus receivers. One is working great but the other isn't. Both have OpenATV 5.1 installed.
The one that isn't working as it should, most of the times freezes at booting, it can freeze right at the begin when the openatv logo appears or at 11% or 33%, I have to turn off and on several times for the receiver complete the boot sequence and start working.
The other problem is that sometimes the receiver loses the satellite signal, I have to turn it off and wait to try again to get signal.
Do you think it's faulty? Is it the boot loader?
I already installed the firmware again, but the problems persisted.
The thing that is strange is that the first time I installed the openatv 5.1 image, the old 4D image logo persisted at the boot, I had to install the image again for the openatv logo appear.
The receiver is new and I paid by paypal, so I can return it, but if this has an easy solution the better.
Thanks for your help and great work in making openatv firmwares.
-
Advertising
-
31.08.2015, 11:20 #2
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +If it's possible, please try to copy the log file named messages located at var/logs also the dmesg file and post them both here and check if a crash log is located at home/roots/log
Maybe it is a hardware bug. Here is a other user with nearly the same problem: http://www.opena.tv/megasat-force-1-...rebooting.html
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
02.09.2015, 07:37 #3
- Registriert seit
- 04.08.2014
- Beiträge
- 117
- Thanks (gegeben)
- 24
- Thanks (bekommen)
- 19
- Total Downloaded
- 500,55 MB
- Total Downloaded
- 500,55 MB
Hi there
Did you get openPLi-4D on delivery? I see Threads for Iqon und Megasat but i`m wondering wether it is exactly the same hardware.
I did not find a datasheet for this cpu. Can you tell me the max temp for this chip ?
Thanks for any infos in regard to this device.
-
02.09.2015, 12:56 #4
- Registriert seit
- 29.08.2015
- Beiträge
- 6
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 2
- Total Downloaded
- 754,7 KB
- Total Downloaded
- 754,7 KB
ThemenstarterHello.
One receiver came with Openatv 4.2 and other that is giving me problems with 4D OpenPli. I suspect that it is a returned receiver from a dissatisfied client.
You can use firmwares from IQON and Word Vision in this MegaSat receiver, I also tried the HD Freaks image.
iqon | Available Images
Index of /worldvisionf1plus
The CPU temperature is now at 76ºC.
I'm giving the receiver a last chance, If it loses signal again in the next few days I'll return it, this already happen twice. The receiver that is working good is great, best price/quality relation. I bought them both for 320€ in eBay.
By the way, the Openatv 5.1 has a bug, if you pause the video in the mediaplayer and start again, it only plays sound and image freezes. This problem doesn't happen in the OpenPli image.
-
Danke - 1 Thankstecfan69 bedankten sich
-
02.09.2015, 13:09 #5
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +@BE-COOL
Good to read that you still the owner of the force1 plus, the vendor has a big intrest so fix this signal loss problems, SO WE NEED YOU, If the problem appaers, please post the debug log, maybe it's possible to find a hint why this happen's.
Sent the box back is an option but the better one is to FIX this issue together.
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
02.09.2015, 13:22 #6
- Registriert seit
- 29.08.2015
- Beiträge
- 6
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 2
- Total Downloaded
- 754,7 KB
- Total Downloaded
- 754,7 KB
Themenstarterlaptan today I'll keep the receiver always on to see if the problem appears again. I don't think it's a software problem, because as I said they are both using Openatv 5.1, one is working great and the other is giving me problems. Maybe they have different motherboard versions/revisions.
If it loses signal again I'll post logs.
In telnet dmesg command I get a message that I don't like:
Code:brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4 Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 Creating 3 MTD partitions on "brcmnand.0": 0x000000000000-0x00000f500000 : "rootfs" 0x000000000000-0x00000f500000 : "rootfs(redundant)" 0x00000f500000-0x00000ff00000 : "kernel"
-
Danke - 1 Thankslaptan bedankten sich
-
02.09.2015, 13:57 #7
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +yes it's normal if the amount dosen't raise up. My force 1 plus has 4 bad blocks. this is ok.
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
Danke - 1 ThanksBE-COOL bedankten sich
-
09.09.2015, 10:12 #8
- Registriert seit
- 04.08.2014
- Beiträge
- 117
- Thanks (gegeben)
- 24
- Thanks (bekommen)
- 19
- Total Downloaded
- 500,55 MB
- Total Downloaded
- 500,55 MB
On this device is openatv 4.2 running. Dvb driver is 3.2.2015 which runs great.
I built 4.2 from source with new drivers. This driver works not as fast as the old one do. So i built an image again but with an old driver. The zapping is faster now.
Regarding cpu temp i put the fan onto the cooling crab directly. Temp is now at 57.
This is fyi because i dont know whether this could solve be-cool problems. I did not try version 5.1. If new gst runs as stable as 0.10 i'll give it a try.
I'm wondering that nobody has this device. 150 bugs for 1,3ghz is quite cheap, isn't it ?.?
-
Danke - 1 Thankslaptan bedankten sich
-
09.09.2015, 11:37 #9
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +Youe mean bucks not BUGs there is a big different, between A BUG= and BUCKS=
I will discuss your hint with the old driver, what I recognized since the new driver is in use, that the zapping time is up to 2-3 seconds, this is way too much for such a fast CPU. I will response our result asap.Geändert von laptan (09.09.2015 um 12:09 Uhr)
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
Danke - 1 Thankstecfan69 bedankten sich
-
09.09.2015, 15:50 #10
- Registriert seit
- 04.08.2014
- Beiträge
- 117
- Thanks (gegeben)
- 24
- Thanks (bekommen)
- 19
- Total Downloaded
- 500,55 MB
- Total Downloaded
- 500,55 MB
Danke dir für den nachhilfeuntericht.
-
Danke - 1 Thankslaptan bedankten sich
Lesezeichen