Ergebnis 1 bis 1 von 1
  1. #1
    Avatar von laptan
    Registriert seit
    25.08.2013
    Ort
    openATV
    Beiträge
    1.814
    Thanks (gegeben)
    1393
    Thanks (bekommen)
    706
    Total Downloaded
    29,18 MB
    Total Downloaded
    29,18 MB
    ReceiverDanke
    Box 1:
    uniBOX HD 1 PLUS
     
     
    Box 2:
    VU+ Zero
     
     
    Box 3:
    AX Triplex
     
     
    Box 4:
    MEGASAT Force 1 Plus
     
     
    Box 5:
    OS Mio 4K +
     
     

    Lightbulb MEGASAT force1 Plus Image Flash mit USB Stick / german & english HowTo

    !!Please see english version below!!


    Anleitung zum Neuflash oder Aktualisieren des Image einer MEGASAT force1 Plus mittels USB-Stick



    Wichtig: Bitte das Archiv auf dem USB-Stick entpacken, dann werden auch die Verzeichnisse korrekt erstellt. Es wird nur der Ordner update benötigt.



    • Image am PC herunterladen und abspeichern (USB Variante).
    • USB Stick mit dem Dateisystem FAT, bzw. FAT32 formatieren.
    • Datei auf dem USB-Stick entpacken (z.B. mit WinRAR, WinZIP, 7ZIP, usw).
    • es ist dann das Verzeichnisse /update auf dem Stick erstellt worden.
    • MEGASAT force1 Plus STB ausschalten (in den Deepstandby /weiße Power LED leuchtet/ BOX Display ist aus / keine Anzeige) oder hinteren Einschaltknopf auf aus / off.
    • alle USB Geräte von der Box entfernen.
    • USB Stick im hinternen unteren USB Port anstecken.
    • MEGASAT force1 Plus STB einschalten (weiße Power LED leuchtet Box Display zeigt Booting).
    • Im TV Display erscheint die Meldung das ein Update gefunden wurde (siehe Bild 1).
    • Am MEGASAT force1 Plus STB die CH - Taste drücken um Software zu installieren.
    • Update Vorgang / Image flash beginnt, im TV Display erscheint die Meldung, dass der Updatevorgang durchgeführt wird (siehe Bild 2), CH - Taste nicht mehr drücken.
    • Warten bis Hinweis im TV Display erscheint Finished (Update beendet) (siehe Bild 3).
    • MEGASAT force1 Plus STB am hintern Einschaltknopf ausschalten.
    • USB Stick entfernen.
    • MEGASAT force1 Plus STB einschalten.
    • openATV Image wird gebootet und er Assistent für die Grundeinstellung des Image erscheint.




    Hinweis: Falls der Flash der BOX nicht funktioniert, könnte das auch am USB Stick selbt oder an der Ordnerstruktur liegen. Je kleiner der Stick deskto besser, in FAT32 formatieren.
    Oder man hat die CH - Taste nicht rechtzeig gedrückt, in diesem Fall Vorgang wie oben beschrieben wiederholen.




    Bild 1:


    MEGASAT force1 Plus Image Flash mit USB Stick / german & english HowTo-splash1.jpg

    Neue Software wurde auf dem USB Stick gefunden, an der BOX die CH - Taste drücken um Software zu installieren.




    Bild 2:

    MEGASAT force1 Plus Image Flash mit USB Stick / german & english HowTo-splash2.jpg

    Bitte warten, der Updatevorgang wird durchgeführt, CH - Taste nicht mehr drücken.



    Bild 3:


    MEGASAT force1 Plus Image Flash mit USB Stick / german & english HowTo-splash3.jpg

    Finished (Update beendet), MEGASAT force1 Plus STB am hintern Einschaltknopf ausschalten, USB Stick entfernen.






    English Version:


    HowTo flash or updating the image of a MEGASAT force1 Plus using a USB stick


    Important: Please unzip the archive on the USB stick, then the directories will also be created correctly. Only the update folder is required.

    1. Download and save the image on your PC.
    2. Format the USB stick with the file system FAT or FAT32.
    3. Unzip the file on the USB stick (e.g. with WinRAR, WinZIP, 7ZIP, etc.). The directory / update has then been created on the USB stick.
    4. Switch off MEGASAT force1 Plus STB (in deep standby / white power LED lights up / BOX display is off / no display) or switch the rear switch to off / off.
    5. Remove all USB devices from the box.
    6. Plug in the USB stick into the lower rear USB port.
    7. Switch on MEGASAT force1 Plus STB (white power LED lights up, box display shows booting).
    8. The message that an update has been found appears in the TV display.
    9. Press the CH button on the MEGASAT force1 Plus STB to install the software.
    Update process / Image flash begins, the message appears in the TV display that the update process is being un procress, do not press the CH button any more.
    Wait until the message Finished appears in the TV display.
    10. Switch off the MEGASAT force1 Plus STB using the switch on the back.
    11. Remove the USB stick.
    12. Switch on the MEGASAT force1 Plus STB.
    13. openATV Image is booted and the wizard for the basic settings of the image appears.


    Hint:
    If the BOX's flash does not work, this could also be due to the USB stick itself or to the folder structure. The smaller the stick file size, the better, formated in FAT32.
    Or you did not press the CH key in the right direction, in this case repeat the process as described above.
    Geändert von laptan (14.08.2020 um 10:09 Uhr)


    Receiver I: OS Mio 4K +
    Receiver II:
    Ax Triplex

    Receiver III: VU+ Zero
    Receiver IV: MEGASAT Force 1+




  2. Thanks banu, karnak bedankten sich
    •   Alt Advertising

       


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 09:44 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com