Ergebnis 1 bis 5 von 5
  1. #1
    Avatar von AMD@OPA
    Registriert seit
    01.08.2013
    Ort
    noch nicht im Altersheim ;)
    Beiträge
    214
    Thanks (gegeben)
    254
    Thanks (bekommen)
    73
    Total Downloaded
    13,89 MB
    Total Downloaded
    13,89 MB
    ReceiverDanke

    Box startet nach Online update und auch nach neuflash nicht mehr [02.02.2015]

    Hallo,

    Ich habe heute ein Online Update gemacht und danach startete die IQON IOS 100HD nicht mehr (4.2er Image).

    Habe dann das heutige Image geladen und per Stick geflasht, brachte aber nichts (selbes Problem).

    Fehlerbild:

    Nach neustart der Box nach dem Online Update und auch neuem Flashen der Box nach einschalten der Box per Netzschalter

    Im Diasplay der Box steht "Starting...", dann kommt kurz das ATV Bootbildchen und dann "Booting..."

    Nun sind schwarte und weiße streifen quer über dem Bildschirm zu sehen und nichts tut sich mehr...

    Mein letztes Update habe ich am 30.01.2015 gemacht und da lief noch alles ohne Probleme.


    Und wie es sich gehört, hier der LOG per Serial nach dem einschalten der Box:

    So wie es ausschaut ist es wohl ein Treiber Problem!?!

    Code:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.02.02 13:56:36 =~=~=~=~=~=~=~=~=~=~=~=
    
    BCM73350010
    012
    Shmoo Version=2.2
    
    MEMC-00000000 RW=00000010 WW=00000048 G=00000001 R=00000008 W=0000001C 
    MEMC-00000001 RW=0000000C WW=00000047 G=00000001 R=00000008 W=00000007 #$
    3
    COPY CODE
    COMPARE CODE
    4567
    
    BCM97335B0 CFE v2.21, CFE core v2.12, Endian Mode: Little
    Build Date: Tue Feb 11 10:47:03 PST 2014 (devbcm@debian-dev)
    Copyright (C) Broadcom Corporation.
    
    Enabling NAND flash at CS1, NOR flash at CS0
    NAND Flash size = 256MB
    DDR Freq:      395MHz
    CPU speed:     405MHz
    Memory Config: 32+16 non-UMA
    Device Tech:   1Gb
    Total memory:  384MB
    Boot Device:   NOR
    Total flash:   8MB
    
    Initializing USB.
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
    
    CFE initialized.
    Starting splash screen.
    I2C_4397_Init : Done
    ***************************************************
    Found splash image - Width = 720 Height = 480
    ***************************************************
    
    HWTYPENUM 0
    searching images on "usbdisk0:update/ios100/cfe/" ...
    I2C_4397_Init : Done
    ***************************************************
    Found splash image - Width = 720 Height = 480
    ***************************************************
    Executing STARTUP...
    Loader:elf Filesys:raw Dev:nandflash0.nkernel File: Options:rootfstype=ubifs root=ubi0:rootfs slab_max_order=0 rootflags=sync ubi.mtd=4 rw bmem=112M hwtypenum=0
    Loading: 0x80001000/8137344 0x807c3a80/165536 Entry address is 0x80606930
    TP1 Entry Address at 0x80000ffc = 80606930
    Starting program at 0x80606930
    
    Linux version 3.9.7 (oe1@build4) (gcc version 4.9.1 (GCC) ) #1 SMP Wed Jan 21 07:06:48 CET 2015
    Fetching vars from bootloader... found 8 vars.
    Options: moca=0 sata=1 pcie=0 usb=1
    Using 256 MB + 128 MB RAM (from CFE)
    bootconsole [early0] enabled
    CPU revision is: 0002a044 (Brcm4380)
    FPU revision is: 00130001
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
    bmem: adding 112 MB RESERVED region at 144 MB (0x07000000@0x09000000)
    Zone ranges:
      Normal   [mem 0x00000000-0x0fffffff]
    Movable zone start for each node
    Early memory node ranges
      node   0: [mem 0x00000000-0x0fffffff]
    Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
    Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
    PERCPU: Embedded 7 pages/cpu @81203000 s6784 r8192 d13696 u32768
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    Kernel command line: rootfstype=ubifs root=ubi0:rootfs slab_max_order=0 rootflags=sync ubi.mtd=4 rw bmem=112M hwtypenum=0
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    __ex_table already sorted, skipping sort
    Memory: 137016k/262144k available (6256k kernel code, 125128k reserved, 1492k data, 244k init, 0k highmem)
    Hierarchical RCU implementation.
    NR_IRQS:160
    Detected MIPS clock frequency: 405 MHz (202.500 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 401.40 BogoMIPS (lpj=200704)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    SMP: Booting CPU1...
    CPU revision is: 0002a044 (Brcm4380)
    FPU revision is: 00130001
    Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
    Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
    SMP: CPU1 is running
    Brought up 2 CPUs
    devtmpfs: initialized
    bmem: adding extra 128 MB RESERVED region at 1536 MB (0x08000000@0x60000000)
    NET: Registered protocol family 16
    USB0: power enable is active low; overcurrent is active low
    bio: create slab <bio-0> at 0
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    PCI host bridge to bus 0000:01
    pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
    pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
    pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
    pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
    pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    Switching to clocksource upg
    cfg80211: Calling CRDA to update world regulatory domain
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP: reno registered
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.21)
    msgmni has been set to 267
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
    console [ttyS0] enabled, bootconsole disabled
    console [ttyS0] enabled, bootconsole disabled
    serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
    loop: module loaded
    PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
    scsi0 : sata_brcmstb
    scsi1 : sata_brcmstb
    ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
    ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
    Broadcom STB NAND controller (BrcmNand Controller)
    Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    NOR chip too large to fit in mapping. Attempting to cope...
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    Reducing visibility of 8192KiB chip to 2048KiB
    ###### BCM97XXX NOR flash device: 0x00000004 bytes @ 0x00800000
    Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    Creating 3 MTD partitions on "Broadcom 9xxxx mapped flash":
    0x000000000000-0x000000300000 : "vmlinux"
    0x000000300000-0x000000400000 : "splash"
    0x000000400000-0x000000480000 : "cfe"
    bcmemac: Broadcom STB 10/100 EMAC driver v3.0
    bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:00:00:00:00:00)
    bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver dm9601
    usbcore: registered new interface driver gl620a
    usbcore: registered new interface driver net1080
    usbcore: registered new interface driver plusb
    usbcore: registered new interface driver rndis_host
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
    ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
    hub 3-0:1.0: USB hub found
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: FUJITSU MJA2500BH G2, 8919, max UDMA/100
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/100
    hub 3-0:1.0: 2 ports detected
    scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MJA2500B 8919 PQ: 0 ANSI: 5
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
    ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    EBI CS1: setting up NAND flash (primary)
    mtd->oobsize=0, mtd->eccOobSize=0
    NAND_CS_NAND_XOR=00000000
    B4: NandSelect=50000200, nandConfig=56052300, chipSelect=1
    brcmnand_read_id: CS1: dev_id=adda9095
    After: NandSelect=50000200, nandConfig=56052300
    Block size=00020000, erase shift=17
    NAND Config: Reg=56052300, chipSize=256 MB, blockSize=128K, erase_shift=11
    busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
    timing1 not adjusted: 5363444f
    timing2 not adjusted: 00000fc6
    BrcmNAND mfg ad da Hynix HY27UF082G2A 256MB on CS1
    
    Found NAND on CS1: ACC=d3000000, cfg=56052300, flashId=adda9095, tim1=5363444f, tim2=00000fc6
    BrcmNAND version = 0x0201 256MB @00000000
    B4: NandSelect=50000200, nandConfig=56052300, chipSelect=1
    brcmnand_read_id: CS1: dev_id=adda9095
    After: NandSelect=50000200, nandConfig=56052300
    Found NAND flash on Chip Select 1, chipSize=256MB, usable size=256MB, base=0
    brcmnand_scan: B4 nand_select = 50000200
    brcmnand_scan: After nand_select = 50000200
    page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17
    Brcm NAND controller version = 2.1 NAND flash size 256MB @10000000
    ECC layout=brcmnand_oob_bch4_4k
    brcmnand_scan:  mtd->oobsize=64
    brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
    brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
    -->brcmnand_default_bbt
    brcmnand_default_bbt: bbt_td = bbt_main_descr
    Creating 4 MTD partitions on "brcmnand.0":
    0x000000000000-0x000002d00000 : "tmtwin"
    0x000002d00000-0x00000eb00000 : "rootfs"
    0x00000eb00000-0x00000f600000 : "bcmdrv"
    0x00000f600000-0x00000ff00000 : "nkernel"
    EBI CS0: setting up NOR flash
    physmap platform flash device: 00800000 at 1f800000
    physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
    Amd/Fujitsu Extended Query Table at 0x0040
      Amd/Fujitsu Extended Query version 1.3.
    number of CFI chips: 1
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    UBI: attaching mtd4 to ubi0
    ata2: SATA link down (SStatus 4 SControl 300)
    UBI: scanning is finished
    UBI: volume 0 ("rootfs") re-sized from 663 to 1476 LEBs
    UBI: attached mtd4 (name "rootfs", size 190 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 1519, bad PEBs: 1, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 682505519
    UBI: available PEBs: 0, total reserved PEBs: 1519, PEBs reserved for bad PEB handling: 39
    UBI: background thread "ubi_bgt0d" started, PID 55
    ALSA device list:
      No soundcards found.
    
    UBIFS: parse sync
    UBIFS: background thread "ubifs_bgt0_0" started, PID 56
    UBIFS: start fixing up free space
    UBIFS: free space fixup complete
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 186019840 bytes (177 MiB, 1465 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID DFF5AA9D-C16E-48B7-B1D8-6FF5AE324E2B, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:12.
    devtmpfs: mounted
    Freeing unused kernel memory: 244k freed
    
    INIT: version 2.88 booting EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    core: module_layout: kernel tainted.
    Disabling lock debugging due to kernel taint
    [ IOS100HD ]
    [Front Version = 111 ]
    input: IOS100HD remote control (native) as /devices/virtual/input/input0
    IOS100HD Linux DVB BCM73xx CI Driver Release Time (31/01/15)

    Gigablue UHD Quad 4k @ + 1x DVB S2x
    Venton Unibox Eco + @ 2x DVB-S
    IQON IOS 100 HD @ 2x DVB-S
    Atemio Nemesis @ 2x DVB-S
    Gigablue HD 800 SE
    Atemio AM6000 HD
    Formuler F1
    Formuler F3



    •   Alt Advertising

       

  2. #2
    Januil
    Gast
    Auch bei mich dass selbe problem, ist schon eine lösung forhanden?

  3. Thanks Ging48 bedankten sich
  4. #3
    Avatar von AMD@OPA
    Registriert seit
    01.08.2013
    Ort
    noch nicht im Altersheim ;)
    Beiträge
    214
    Thanks (gegeben)
    254
    Thanks (bekommen)
    73
    Themenstarter
    Total Downloaded
    13,89 MB
    Total Downloaded
    13,89 MB
    ReceiverDanke
    Wir uns wohl etwas gedulden und auf einen neuen Treiber warten.


    Zitat Zitat von AMD@OPA Beitrag anzeigen

    ...wie es ausschaut, ist es wohl ein Problem mit dem Treiber.

    Wenn die Probs behoben sind wird es ganz bestimmt eine Rückmeldung dazu geben.

    Also bitte vorerst mal kein Online Update machen oder ein neues Image Flashen .

    Edit:

    Habe gerade gesehen das es heute einen neuen Treiber gab mit dem das Problem gefixt wurde.

    Somit sollte dann ab morgen, mit dem aktuellen Image wieder alles ok sein.
    Geändert von AMD@OPA (03.02.2015 um 22:19 Uhr)

    Gigablue UHD Quad 4k @ + 1x DVB S2x
    Venton Unibox Eco + @ 2x DVB-S
    IQON IOS 100 HD @ 2x DVB-S
    Atemio Nemesis @ 2x DVB-S
    Gigablue HD 800 SE
    Atemio AM6000 HD
    Formuler F1
    Formuler F3



  5. #4
    Avatar von AMD@OPA
    Registriert seit
    01.08.2013
    Ort
    noch nicht im Altersheim ;)
    Beiträge
    214
    Thanks (gegeben)
    254
    Thanks (bekommen)
    73
    Themenstarter
    Total Downloaded
    13,89 MB
    Total Downloaded
    13,89 MB
    ReceiverDanke
    Habe das heutige Image ( 04.02.2015 ) geflasht und es ist wieder alles OK !

    Gigablue UHD Quad 4k @ + 1x DVB S2x
    Venton Unibox Eco + @ 2x DVB-S
    IQON IOS 100 HD @ 2x DVB-S
    Atemio Nemesis @ 2x DVB-S
    Gigablue HD 800 SE
    Atemio AM6000 HD
    Formuler F1
    Formuler F3



  6. #5
    Anfänger
    Registriert seit
    11.08.2013
    Beiträge
    9
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    13,50 MB
    Total Downloaded
    13,50 MB
    ReceiverDanke
    Hallo,

    Ich habe die selbe problem... Aber bei meine reciver war eine alte images(http://www.opena.tv/iqon-ios100hd/17...g-haengen.html)

    Bootloader neu, aber es bleibt bei booting hangen...

    Danke!


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 12:22 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,00%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com