Thanks Thanks:  2
Ergebnis 1 bis 10 von 10
  1. #1
    Anfänger
    Registriert seit
    28.06.2014
    Beiträge
    24
    Total Downloaded
    150,9 KB
    Total Downloaded
    150,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Edision Optimuss OS2 plus
     
     
    Box 2:
    GI Xpeed LX2 SAT/SAT
     
     
    Box 3:
    GI Xpeed LX2 SAT/DVB-T
     
     
    Box 4:
    DM 800HDse
     
     
    Box 5:
    DM 7000S - Nokia Dbox2
     
     

    Gigabyte U8000 und U7200 USB DVB-T STICK Treiber

    Hallo!

    Habe alle DVB Treiber ueber Feed installiert. Sollte ein DIB7000 chip verbaut sein. Nur am U8000 leuchtet die LED am Stick (am U7200 nichts).
    Leider starten die Sticks nicht und werden auch nicht in der Konfiguration angezeigt.
    Box ist eine Xpeed LX2 mit Twin Sattuner und letztem Update von OpenATV 4.1.
    Muss ich noch etwas nachinstllieren, damit die USB Tuner starten?

    Danke in voraus fuer die Antworten!

    •   Alt Advertising

       

  2. #2
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.766
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    was sagt den dmesg nach einstecken in den usb port

  3. #3
    Anfänger
    Registriert seit
    28.06.2014
    Beiträge
    24
    Themenstarter
    Total Downloaded
    150,9 KB
    Total Downloaded
    150,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Edision Optimuss OS2 plus
     
     
    Box 2:
    GI Xpeed LX2 SAT/SAT
     
     
    Box 3:
    GI Xpeed LX2 SAT/DVB-T
     
     
    Box 4:
    DM 800HDse
     
     
    Box 5:
    DM 7000S - Nokia Dbox2
     
     
    Code:
    root@xpeedlx:~# dmesg
    [<80132850>] create_dir+0x74/0x15c
    [<80132e14>] sysfs_create_dir+0xa4/0x110
    [<802f53bc>] kobject_add_internal+0x84/0x250
    [<802f5980>] kobject_add+0x58/0xb0
    [<8034713c>] device_add+0xec/0x6ec
    [<8043b8a4>] i2c_register_adapter+0xd4/0x328
    [<d209b30c>] i2c_adapter_init+0x64/0x84 [dibx000_common]
    [<d209b47c>] dibx000_init_i2c_master+0x150/0x2c0 [dibx000_common]
    [<d20bfee8>] dib7000p_attach+0x144/0x7fc [dib7000p]
    [<e2401748>] stk7700ph_frontend_attach+0x158/0x240 [dvb_usb_dib0700]
    [<d208eb04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]
    [<d208d9b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]
    [<e23fe5c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
    [<80415c9c>] usb_probe_interface+0x1f0/0x334
    [<8034a654>] driver_probe_device+0xb0/0x2d0
    [<8034a994>] __driver_attach+0xbc/0xc4
    [<803485fc>] bus_for_each_dev+0x6c/0xb4
    [<80349c5c>] bus_add_driver+0x218/0x2e4
    [<8034b0e8>] driver_register+0x84/0x12c
    [<80414060>] usb_register_driver+0x84/0x1a0
    [<8000154c>] do_one_initcall+0x13c/0x200
    [<800829c4>] load_module+0x1e18/0x2274
    [<80082f94>] SyS_finit_module+0x88/0xa8
    [<80011e1c>] stack_done+0x20/0x44
    
    ---[ end trace dec8e3be62587ad5 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 191 at lib/kobject.c:196 kobject_add_internal+0x240/0x250()
    kobject_add_internal failed for i2c-0 with -EEXIST, don't try to register things with the same name in the same directory.
    Modules linked in: dvb_usb_dib0700(+) dib8000 dib0070 dib7000m dib0090 dib7000p dib3000mc dibx000_common dvb_usb dvb(OF)
    CPU: 0 PID: 191 Comm: modprobe Tainted: GF       W  O 3.12.1 #1
    Stack : 00000000 00000000 00000000 00000000 807b6592 0000003f 000000c4 8e5f1b50
              807394a7 8e408690 806a02c0 000000bf 807b39e4 8e5f1b50 80470000 8e45eedc
              8e45e9f0 805fb724 00000003 8002e200 000000c4 00000000 806a5568 8e5e394c
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 8e5e38d8
              ...
    Call Trace:
    [<8000e570>] show_stack+0x64/0x7c
    [<8002e3b8>] warn_slowpath_common+0x84/0xb4
    [<8002e414>] warn_slowpath_fmt+0x2c/0x38
    [<802f5578>] kobject_add_internal+0x240/0x250
    [<802f5980>] kobject_add+0x58/0xb0
    [<8034713c>] device_add+0xec/0x6ec
    [<8043b8a4>] i2c_register_adapter+0xd4/0x328
    [<d209b30c>] i2c_adapter_init+0x64/0x84 [dibx000_common]
    [<d209b47c>] dibx000_init_i2c_master+0x150/0x2c0 [dibx000_common]
    [<d20bfee8>] dib7000p_attach+0x144/0x7fc [dib7000p]
    [<e2401748>] stk7700ph_frontend_attach+0x158/0x240 [dvb_usb_dib0700]
    [<d208eb04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]
    [<d208d9b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]
    [<e23fe5c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
    [<80415c9c>] usb_probe_interface+0x1f0/0x334
    [<8034a654>] driver_probe_device+0xb0/0x2d0
    [<8034a994>] __driver_attach+0xbc/0xc4
    [<803485fc>] bus_for_each_dev+0x6c/0xb4
    [<80349c5c>] bus_add_driver+0x218/0x2e4
    [<8034b0e8>] driver_register+0x84/0x12c
    [<80414060>] usb_register_driver+0x84/0x1a0
    [<8000154c>] do_one_initcall+0x13c/0x200
    [<800829c4>] load_module+0x1e18/0x2274
    [<80082f94>] SyS_finit_module+0x88/0xa8
    [<80011e1c>] stack_done+0x20/0x44
    
    ---[ end trace dec8e3be62587ad6 ]---
    DiBX000: could not initialize the master i2c_adapter
    kobject (8e45e810): tried to init an initialized object, something is seriously wrong.
    CPU: 0 PID: 191 Comm: modprobe Tainted: GF       W  O 3.12.1 #1
    Stack : 00000000 00000000 00000000 00000000 807b6592 0000003f 80760000 8e5f1b50
              807394a7 8e408690 806a02c0 000000bf 807b39e4 8e5f1b50 80470000 8e45eedc
              8e45e9f0 805fb724 00000000 8002e200 8e5e3abc 00000000 806a5568 8e5e3a0c
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 8e5e3998
              ...
    Call Trace:
    [<8000e570>] show_stack+0x64/0x7c
    [<802f5044>] kobject_init+0xac/0xc0
    [<80345ba4>] device_initialize+0x2c/0x98
    [<80347750>] device_register+0x14/0x28
    [<8043b8a4>] i2c_register_adapter+0xd4/0x328
    [<d209b30c>] i2c_adapter_init+0x64/0x84 [dibx000_common]
    [<d209b4ac>] dibx000_init_i2c_master+0x180/0x2c0 [dibx000_common]
    [<d20bfee8>] dib7000p_attach+0x144/0x7fc [dib7000p]
    [<e2401748>] stk7700ph_frontend_attach+0x158/0x240 [dvb_usb_dib0700]
    [<d208eb04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]
    [<d208d9b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]
    [<e23fe5c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
    [<80415c9c>] usb_probe_interface+0x1f0/0x334
    [<8034a654>] driver_probe_device+0xb0/0x2d0
    [<8034a994>] __driver_attach+0xbc/0xc4
    [<803485fc>] bus_for_each_dev+0x6c/0xb4
    [<80349c5c>] bus_add_driver+0x218/0x2e4
    [<8034b0e8>] driver_register+0x84/0x12c
    [<80414060>] usb_register_driver+0x84/0x1a0
    [<8000154c>] do_one_initcall+0x13c/0x200
    [<800829c4>] load_module+0x1e18/0x2274
    [<80082f94>] SyS_finit_module+0x88/0xa8
    [<80011e1c>] stack_done+0x20/0x44
    
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 191 at fs/sysfs/dir.c:526 sysfs_add_one+0xbc/0xec()
    sysfs: cannot create duplicate filename '/devices/platform/ehci-brcm.0/usb1/1-1/1-1.2/i2c-0'
    Modules linked in: dvb_usb_dib0700(+) dib8000 dib0070 dib7000m dib0090 dib7000p dib3000mc dibx000_common dvb_usb dvb(OF)
    CPU: 0 PID: 191 Comm: modprobe Tainted: GF       W  O 3.12.1 #1
    Stack : 00000000 00000000 00000000 00000000 807b6592 0000003f 0000020e 8e5f1b50
              807394a7 8e408690 806a02c0 000000bf 807b39e4 8e5f1b50 80470000 8e45eedc
              8e45e9f0 805fb724 00000003 8002e200 0000020e 00000000 806a5568 8e5e38bc
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 8e5e3848
              ...
    Call Trace:
    [<8000e570>] show_stack+0x64/0x7c
    [<8002e3b8>] warn_slowpath_common+0x84/0xb4
    [<8002e414>] warn_slowpath_fmt+0x2c/0x38
    [<80132580>] sysfs_add_one+0xbc/0xec
    [<80132850>] create_dir+0x74/0x15c
    [<80132e14>] sysfs_create_dir+0xa4/0x110
    [<802f53bc>] kobject_add_internal+0x84/0x250
    [<802f5980>] kobject_add+0x58/0xb0
    [<8034713c>] device_add+0xec/0x6ec
    [<8043b8a4>] i2c_register_adapter+0xd4/0x328
    [<d209b30c>] i2c_adapter_init+0x64/0x84 [dibx000_common]
    [<d209b4ac>] dibx000_init_i2c_master+0x180/0x2c0 [dibx000_common]
    [<d20bfee8>] dib7000p_attach+0x144/0x7fc [dib7000p]
    [<e2401748>] stk7700ph_frontend_attach+0x158/0x240 [dvb_usb_dib0700]
    [<d208eb04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]
    [<d208d9b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]
    [<e23fe5c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
    [<80415c9c>] usb_probe_interface+0x1f0/0x334
    [<8034a654>] driver_probe_device+0xb0/0x2d0
    [<8034a994>] __driver_attach+0xbc/0xc4
    [<803485fc>] bus_for_each_dev+0x6c/0xb4
    [<80349c5c>] bus_add_driver+0x218/0x2e4
    [<8034b0e8>] driver_register+0x84/0x12c
    [<80414060>] usb_register_driver+0x84/0x1a0
    [<8000154c>] do_one_initcall+0x13c/0x200
    [<800829c4>] load_module+0x1e18/0x2274
    [<80082f94>] SyS_finit_module+0x88/0xa8
    [<80011e1c>] stack_done+0x20/0x44
    
    ---[ end trace dec8e3be62587ad7 ]---
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 191 at lib/kobject.c:196 kobject_add_internal+0x240/0x250()
    kobject_add_internal failed for i2c-0 with -EEXIST, don't try to register things with the same name in the same directory.
    Modules linked in: dvb_usb_dib0700(+) dib8000 dib0070 dib7000m dib0090 dib7000p dib3000mc dibx000_common dvb_usb dvb(OF)
    CPU: 0 PID: 191 Comm: modprobe Tainted: GF       W  O 3.12.1 #1
    Stack : 00000000 00000000 00000000 00000000 807b6592 0000003f 000000c4 8e5f1b50
              807394a7 8e408690 806a02c0 000000bf 807b39e4 8e5f1b50 80470000 8e45eedc
              8e45e9f0 805fb724 00000003 8002e200 000000c4 00000000 806a5568 8e5e394c
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
              00000000 00000000 00000000 00000000 00000000 00000000 00000000 8e5e38d8
              ...
    Call Trace:
    [<8000e570>] show_stack+0x64/0x7c
    [<8002e3b8>] warn_slowpath_common+0x84/0xb4
    [<8002e414>] warn_slowpath_fmt+0x2c/0x38
    [<802f5578>] kobject_add_internal+0x240/0x250
    [<802f5980>] kobject_add+0x58/0xb0
    [<8034713c>] device_add+0xec/0x6ec
    [<8043b8a4>] i2c_register_adapter+0xd4/0x328
    [<d209b30c>] i2c_adapter_init+0x64/0x84 [dibx000_common]
    [<d209b4ac>] dibx000_init_i2c_master+0x180/0x2c0 [dibx000_common]
    [<d20bfee8>] dib7000p_attach+0x144/0x7fc [dib7000p]
    [<e2401748>] stk7700ph_frontend_attach+0x158/0x240 [dvb_usb_dib0700]
    [<d208eb04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]
    [<d208d9b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]
    [<e23fe5c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
    [<80415c9c>] usb_probe_interface+0x1f0/0x334
    [<8034a654>] driver_probe_device+0xb0/0x2d0
    [<8034a994>] __driver_attach+0xbc/0xc4
    [<803485fc>] bus_for_each_dev+0x6c/0xb4
    [<80349c5c>] bus_add_driver+0x218/0x2e4
    [<8034b0e8>] driver_register+0x84/0x12c
    [<80414060>] usb_register_driver+0x84/0x1a0
    [<8000154c>] do_one_initcall+0x13c/0x200
    [<800829c4>] load_module+0x1e18/0x2274
    [<80082f94>] SyS_finit_module+0x88/0xa8
    [<80011e1c>] stack_done+0x20/0x44
    
    ---[ end trace dec8e3be62587ad8 ]---
    DiBX000: could not initialize the master i2c_adapter
    CPU 0 Unable to handle kernel paging request at virtual address 0000165c, epc == e23fe7f8, ra == e23fe7f8
    Oops[#1]:
    CPU: 0 PID: 191 Comm: modprobe Tainted: GF       W  O 3.12.1 #1
    task: 8e4084e8 ti: 8e5e2000 task.ti: 8e5e2000
    $ 0   : 00000000 00000001 00000000 00010000
    $ 4   : 8e45e808 8e5f1b50 00000001 00000000
    $ 8   : 00000004 00000266 63326920 00000000
    $12   : 6920746f 00000000 00000000 6974696e
    $16   : 80349e30 8e5f1b50 8e45e808 80740000
    $20   : fffbb688 fffffff5 00000001 8e45eedc
    $24   : 00000000 8033d620
    $28   : 8e5e2000 8e5e3a40 8e45e9f0 e23fe7f8
    Hi    : 00000000
    Lo    : 00000176
    epc   : e23fe7f8 dib0700_i2c_xfer+0x48/0x4f0 [dvb_usb_dib0700]
        Tainted: GF       W  O
    ra    : e23fe7f8 dib0700_i2c_xfer+0x48/0x4f0 [dvb_usb_dib0700]
    Status: 10008403        KERNEL EXL IE
    Cause : 00800008
    BadVA : 0000165c
    PrId  : 00029032 (Broadcom BMIPS3300)
    Modules linked in: dvb_usb_dib0700(+) dib8000 dib0070 dib7000m dib0090 dib7000p dib3000mc dibx000_common dvb_usb dvb(OF)
    Process modprobe (pid: 191, threadinfo=8e5e2000, task=8e4084e8, tls=77025490)
    Stack : 00000000 8033d620 00000000 80740000 8e5e2000 8e5e3a78 00000000 80067994
              10008403 00000000 00000176 10008401 00808000 80302a90 8e45e7e0 8e5f1b50
              00000001 80740000 fffbb688 fffffff5 00000001 8e45eedc 8e45e9f0 8043ab54
              ffffffef 8e45e7e0 8e5f1440 8e5f1cf4 8e45e7e0 00000001 8e5f1b50 8e45e7f0
              0000000b 8e5f1b50 80470000 8043bdb8 0000000b 8e5f1b50 80470000 00000000
              ...
    Call Trace:
    [<e23fe7f8>] dib0700_i2c_xfer+0x48/0x4f0 [dvb_usb_dib0700]
    [<8043ab54>] __i2c_transfer+0x90/0xc8
    [<8043bdb8>] i2c_transfer+0x7c/0xc0
    [<d209b4fc>] dibx000_init_i2c_master+0x1d0/0x2c0 [dibx000_common]
    [<d20bfee8>] dib7000p_attach+0x144/0x7fc [dib7000p]
    [<e2401748>] stk7700ph_frontend_attach+0x158/0x240 [dvb_usb_dib0700]
    [<d208eb04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]
    [<d208d9b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]
    [<e23fe5c4>] dib0700_probe+0x88/0x184 [dvb_usb_dib0700]
    [<80415c9c>] usb_probe_interface+0x1f0/0x334
    [<8034a654>] driver_probe_device+0xb0/0x2d0
    [<8034a994>] __driver_attach+0xbc/0xc4
    [<803485fc>] bus_for_each_dev+0x6c/0xb4
    [<80349c5c>] bus_add_driver+0x218/0x2e4
    [<8034b0e8>] driver_register+0x84/0x12c
    [<80414060>] usb_register_driver+0x84/0x1a0
    [<8000154c>] do_one_initcall+0x13c/0x200
    [<800829c4>] load_module+0x1e18/0x2274
    [<80082f94>] SyS_finit_module+0x88/0xa8
    [<80011e1c>] stack_done+0x20/0x44
    
    
    Code: 00a08821  0200f809  00c0b021 <8c42165c> 90430009  24020001  10620072  02402021  0200f809
    ---[ end trace dec8e3be62587ad9 ]---
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm7552_pm_genet_enable 00
    eth0 Link DOWN.
    NET: Registered protocol family 10
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    eth0 Link UP.
    Auto config phy
    eth0: Link is up, 100 Mbps Full Duplex
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [video_videomodepreferred_read] mode(0) not found!!!
    [video_policy2_write] policy(scale) not found
    [video_videomodepreferred_read] mode(0) not found!!!
    [fp_mcu_set_time_offset] rtc_offset = 7200
    [fp_mcu_set_time] 2014/07/13 08:44:14 (rtc_offset = 7200)
    [fp_mcu_set_time] Set local time => 2014/07/13 10:44:14
    [video_policy2_write] policy(scale) not found
    Bitte sehr - Captain!

  4. #4
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.766
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    ja also kernel issue muss golden fixen da kommst jetzt nicht weiter !

  5. #5
    Anfänger
    Registriert seit
    28.06.2014
    Beiträge
    24
    Themenstarter
    Total Downloaded
    150,9 KB
    Total Downloaded
    150,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Edision Optimuss OS2 plus
     
     
    Box 2:
    GI Xpeed LX2 SAT/SAT
     
     
    Box 3:
    GI Xpeed LX2 SAT/DVB-T
     
     
    Box 4:
    DM 800HDse
     
     
    Box 5:
    DM 7000S - Nokia Dbox2
     
     
    OK - vielen Dank erstmal.

    Hab mir noch nen Stick mit RTL2832U Chipsatz bestellt.
    Hoffe mit dem geht es dann.
    Werde dann berichten!

    Bis dann!

  6. #6
    Anfänger
    Registriert seit
    28.06.2014
    Beiträge
    24
    Themenstarter
    Total Downloaded
    150,9 KB
    Total Downloaded
    150,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Edision Optimuss OS2 plus
     
     
    Box 2:
    GI Xpeed LX2 SAT/SAT
     
     
    Box 3:
    GI Xpeed LX2 SAT/DVB-T
     
     
    Box 4:
    DM 800HDse
     
     
    Box 5:
    DM 7000S - Nokia Dbox2
     
     

    Dvb-t usb tuner mit rtl2832u chip probleme beim umschalten

    Beim Umschalten von DVB-S auf DVB-T und umgekehrt bekomme ich einen Dauerspinner - danach hift nur noch der Netzschalter.
    Hier dmesg beim Dauerspinner:
    Code:
    xpeedlx login: root
    root@xpeedlx:~# dmesg
    On node 0 totalpages: 65536
    free_area_init_node: node 0, pgdat 80775720, node_mem_map 81000000
      Normal zone: 512 pages used for memmap
      Normal zone: 0 pages reserved
      Normal zone: 65536 pages, LIFO batch:15
    Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
    Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
    pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    pcpu-alloc: [0] 0
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    Kernel command line: ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=ttyS0,115200n8
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 235488K/262144K available (6149K kernel code, 293K rwdata, 1184K rodata, 232K init, 106K bss, 26656K reserved)
    NR_IRQS:160
    Measuring MIPS counter frequency...
    Detected MIPS clock frequency: 751 MHz (375.766 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    devtmpfs: initialized
    bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
    NET: Registered protocol family 16
    USB0: power enable is active low; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to clocksource wktmr
    FS-Cache: Loaded
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP: reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.22)
    msgmni has been set to 459
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
    loop: module loaded
    brcmstb_nand: NAND controller driver is loaded
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm7552_pm_genet_enable 00
    Config internal EPHY through MDIO
    __clk_disable: enet [0]
    bcm7552_pm_genet_disable 00
    __clk_disable: network [0]
    usbcore: registered new interface driver zd1201
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    __clk_enable: usb [1]
    bcm7552_pm_usb_enable 00
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    EBI CS2: setting up NAND flash (primary)
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-1
    
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    nand_read_bbt: bad block at 0x0000081a0000
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000000000-0x00001f900000 : "rootfs"
    0x000000000000-0x000020000000 : "entire_device"
    0x00001f900000-0x00001ff00000 : "kernel"
    EBI CS0: setting up SPI flash
    spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    m25p80 spi0.0: found mx25l3205d, expected m25p80
    m25p80 spi0.0: mx25l3205d (4096 Kbytes)
    Creating 6 MTD partitions on "spi0.0":
    0x000000000000-0x000000080000 : "cfe"
    0x000000080000-0x000000280000 : "splash"
    0x000000280000-0x000000300000 : "macadr"
    0x000000300000-0x000000380000 : "nvram"
    0x000000380000-0x0000003c0000 : "bootconfig"
    0x0000003c0000-0x000000400000 : "facconfig"
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    UBI: attaching mtd0 to ubi0
    usb 1-1: new high-speed USB device number 2 using ehci-brcm
    UBI: scanning is finished
    UBI: attached mtd0 (name "rootfs", size 505 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 4039, bad PEBs: 1, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 65894961
    UBI: available PEBs: 0, total reserved PEBs: 4039, PEBs reserved for bad PEB handling: 79
    UBI: background thread "ubi_bgt0d" started, PID 46
    UBI error: ubi_attach_mtd_dev: mtd0 is already attached to ubi0
    UBI error: ubi_init: cannot attach mtd0
    ALSA device list:
      No soundcards found.
    UBIFS: background thread "ubifs_bgt0_0" started, PID 47
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 500920320 bytes (477 MiB, 3945 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID F475A4F1-B500-4742-B19C-6FDC7DBE706F, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:10.
    devtmpfs: mounted
    Freeing unused kernel memory: 232K (80776000 - 807b0000)
    Algorithmics/MIPS FPU Emulator v1.5
    dvb: module_layout: kernel tainted.
    Disabling lock debugging due to kernel taint
    [platform_i2c_mutex_init] ...
    machine = 230
    fb0: brcmfb frame buffer device
    [mcu_i2c_read] NEXUS_I2c_Read(11) nErr = 1114113
    [fp_mcu_set_interface] BLADE1128 not found
    [MCU] ver : 2.00.45
    [MCU] model : RHS300
    [MCU] power : SWITCH
    input: dreambox front panel as /devices/virtual/input/input0
    input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    DVB: registering new adapter (dvb)
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 INTERNAL)...
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
    usb 1-1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
    usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
    DVB: registering new adapter (Realtek RTL2832U reference design)
    usb 1-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
    r820t 0-001a: creating new instance
    r820t 0-001a: Rafael Micro r820t successfully identified
    Registered IR keymap rc-empty
    input: Realtek RTL2832U reference design as /devices/platform/ehci-brcm.0/usb1/1-1/rc/rc0/input2
    rc0: Realtek RTL2832U reference design as /devices/platform/ehci-brcm.0/usb1/1-1/rc/rc0
    usb 1-1: dvb_usb_v2: schedule remote query interval to 400 msecs
    usb 1-1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
    usbcore: registered new interface driver dvb_usb_rtl28xxu
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm7552_pm_genet_enable 00
    eth0 Link DOWN.
    NET: Registered protocol family 10
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    eth0 Link UP.
    Auto config phy
    eth0: Link is up, 100 Mbps Full Duplex
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    dvb dvb.0: DVB: registering adapter 0 frontend 0 ()...
    vtunerc0: VTUNER_SET_NAME 'RTL2838UHIDIR'
    vtunerc0: VTUNER_SET_TYPE 'DVB-T' => 'RTL2838UHIDIR'
    vtunerc0: unknown IOCTL 0x21
    [video_videomodepreferred_read] mode(0) not found!!!
    [video_policy2_write] policy(scale) not found
    [video_videomodepreferred_read] mode(0) not found!!!
    [fp_mcu_set_time_offset] rtc_offset = 7200
    [fp_mcu_set_time] 2014/07/24 13:50:31 (rtc_offset = 7200)
    [fp_mcu_set_time] Set local time => 2014/07/24 15:50:31
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [fp_mcu_set_time] 2014/07/24 13:51:16 (rtc_offset = 7200)
    [fp_mcu_set_time] Set local time => 2014/07/24 15:51:16
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [fp_mcu_set_time] 2014/07/24 13:51:30 (rtc_offset = 7200)
    [fp_mcu_set_time] Set local time => 2014/07/24 15:51:30
    [video_policy2_write] policy(scale) not found
    [fp_mcu_set_time] 2014/07/24 13:51:45 (rtc_offset = 7200)
    [fp_mcu_set_time] Set local time => 2014/07/24 15:51:45
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    [video_policy2_write] policy(scale) not found
    root@xpeedlx:~#

  7. #7
    Anfänger
    Registriert seit
    28.06.2014
    Beiträge
    24
    Themenstarter
    Total Downloaded
    150,9 KB
    Total Downloaded
    150,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Edision Optimuss OS2 plus
     
     
    Box 2:
    GI Xpeed LX2 SAT/SAT
     
     
    Box 3:
    GI Xpeed LX2 SAT/DVB-T
     
     
    Box 4:
    DM 800HDse
     
     
    Box 5:
    DM 7000S - Nokia Dbox2
     
     
    Bitte zu diesem Thema verschieben:
    Gigabyte U8000 und U7200 USB DVB-T STICK Treiber

    Danke!

  8. #8
    Avatar von mike99
    Registriert seit
    05.04.2013
    Ort
    Berlin
    Beiträge
    5.774
    Total Downloaded
    268,56 MB
    Total Downloaded
    268,56 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von caroli Beitrag anzeigen
    Bitte zu diesem Thema verschieben:
    Gigabyte U8000 und U7200 USB DVB-T STICK Treiber
    Auf wunsch verschoben.
    Gruss Mike



    Mut@nt HD-51 - 2x DVB-C/T2, OptiCombo C/T2 USB, FreenetModul

    OSmini - 1x DVB-S und 1x DVB-C/T, OSmini Plus
    Mut@nt HD-2400 - 1x DVB-S und 3x DVB-C/T
    Toshiba 40TL838


  9. Thanks Thomas4711 bedankten sich
  10. #9
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.766
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    Infos wurde schon an Hersteller Reportet da können wir nur warten

  11. Thanks caroli bedankten sich
  12. #10
    Anfänger
    Registriert seit
    28.06.2014
    Beiträge
    24
    Themenstarter
    Total Downloaded
    150,9 KB
    Total Downloaded
    150,9 KB
    ReceiverDankeAktivitäten
    Box 1:
    Edision Optimuss OS2 plus
     
     
    Box 2:
    GI Xpeed LX2 SAT/SAT
     
     
    Box 3:
    GI Xpeed LX2 SAT/DVB-T
     
     
    Box 4:
    DM 800HDse
     
     
    Box 5:
    DM 7000S - Nokia Dbox2
     
     
    Nach dem Update von heute läuft der Stick mit RTL2832U Chip - wird nur heiss wie Hölle!


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 01:39 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com