Thanks: 0
Ergebnis 1 bis 2 von 2
Thema: LX1 bootet nicht
-
23.12.2016, 23:34 #1
- Registriert seit
- 23.03.2014
- Beiträge
- 10
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 91,36 MB
- Total Downloaded
- 91,36 MB
LX1 bootet nicht
Hallo,
habe gerade ein Online-Update durchgeführt und beim anschließenden Reboot blieb die Box hängen. Im Display steht boot. Flashen über USB ist nicht möglich. Folgendes habe ich über RS232 ausgelesen.
Code:BCM735800011 00000001 234#!@ M0 WLCT 0000000001 SHMOO VER MSA 16b 1.12 PKID 16020112 20120406 003B6000 003B0000 001B103F 00001C00 S300001CF S000013A0 RDLY WL 0 0000000004 RDEN WL 0 0000000039 RDQS WL 0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++- 01 --------------------++++++++++++++++++++++X+++++++++++++++++++++ 02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ 03 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++ 04 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---- 05 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 06 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 07 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 08 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---- 09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++-- 10 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 11 ------------++++++++++++++++++++++++X++++++++++++++++++++++++--- 12 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 13 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++--- 14 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++- 15 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++----- P WL 0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 01 --------------------++++++++++++++++++++++X+++++++++++++++++++++ 02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ 03 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++ 04 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 05 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ 06 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 07 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 08 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++ 10 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 11 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++ 12 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 13 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 14 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 15 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ N WL 0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++- 01 --------------------++++++++++++++++++++++X+++++++++++++++++++++ 02 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 03 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 04 ----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++---- 05 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 06 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 07 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 08 ----++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--- 09 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++-- 10 -----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 11 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++--- 12 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 13 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++--- 14 -------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++- 15 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++---- WRDQ WL 0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++++++++X++++++++++++++++++++++++----++++++++++ 01 -----++++++++++++++++++++++X+++++++++++++++++++++--------------+ 02 ++++++++++++++++++++++++X++++++++++++++++++++++++-------++++++++ 03 +++++++++++++++++++++++++X++++++++++++++++++++++++------++++++++ 04 ++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++++ 05 +++++++++++++++++++++++++X++++++++++++++++++++++++-----+++++++++ 06 ++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++++ 07 +++++++++++++++++++++++++X+++++++++++++++++++++++++-----++++++++ 08 +++++++++++++++++++++++++X+++++++++++++++++++++++++---++++++++++ 09 -++++++++++++++++++++++++X+++++++++++++++++++++++---------++++++ 10 ++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++++ 11 ++++++++++++++++++++++++X++++++++++++++++++++++++--------+++++++ 12 +++++++++++++++++++++++++X++++++++++++++++++++++++----++++++++++ 13 +++++++++++++++++++++++++X+++++++++++++++++++++++++--------+++++ 14 ++++++++++++++++++++++++X++++++++++++++++++++++++------+++++++++ 15 +++++++++++++++++++++++++X++++++++++++++++++++++++-------+++++++ WRDM WL 0 0000000024 WRDM WL 0 0000000024 ADDR 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++S++++++++X++++++++++++++++++++++++++++------- B03B6054 567#!@#@ BCM97358A1 CFE v4.144, CFE core v4.29, Endian Mode: Little Build Date: Mon Jul 7 08:24:59 CEST 2014 (paul@ini) Copyright (C) Broadcom Corporation. Enabling NAND flash at CS2. BCHP_NAND_FLASH_DEVICE_ID =0xecdc1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x54ececd c CPU speed: 751MHz Total memory(0): 512MB DDR Freq: 800 MHz DDR Mode: DDR3 MEMC 0 DEV SIZE: 2GBIT MEMC 0 DDR Width:16 MEMC 0 DEV Width:8 Boot Device: SPI Total flash: 4MB Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub CFE initialized. USB: New device connected to bus 0 hub 1 port 1 USB: Resetting device on bus 0 hub 1 port 1 USB: Locating Class 08 Vendor 0951 Product 1665: Mass-Storage Device USBMASS: Unit 0 connected USB: New device connected to bus 0 hub 1 port 2 USB: Resetting device on bus 0 hub 1 port 2 USB: Locating Class 08 Vendor 1307 Product 0165: Mass-Storage Device USBMASS: Unit 1 connected *** Kingston DataTraveler 2.0 (31468 MB, lbs=512) *** *** Could not find a valid partition...status=00000000, ids=83000000! dir: Could not init file system: File system not recognized [FLASH-TOOL] Searching update files... *** Could not find a valid partition...status=00000000, ids=83000000! [FLASH-TOOL] Could not init file system: File system not recognized [FLASH-TOOL] There are not any update files... Booting... Starting splash screen. Found splash image - Width = 720 Height = 576 Non Interlaced Replace list 043e8680 0c800000Interlaced Replace list 043e8c20 0c 8005a0 Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:ubi.mtd=0 root=ubi0:r ootfs rootfstype=ubifs rw bmem=256M@512M Loading: 0x80001000/8124340 0x807c07b4/177644 Entry address is 0x8060d3d0 Starting program at 0x8060d3d0 Initializing cgroup subsys cpuset Linux version 3.12.1 (oe1@BUILD3) (gcc version 5.3.0 (GCC) ) #1 Thu Jul 7 19:41: 38 CEST 2016 Fetching vars from bootloader... found 10 vars. Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0 sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1 Using 512 MB + 0 MB RAM (from CFE) MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem CPU revision is: 00029032 (Broadcom BMIPS3300) Determined physical RAM map: memory: 10000000 @ 00000000 (usable) bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000) Zone ranges: Normal [mem 0x00000000-0x0fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x0fffffff] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=256M@51 2M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M cons ole=ttyS0,115200n8 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 235356K/262144K available (6227K kernel code, 295K rwdata, 1220K rodata, 244K init, 111K bss, 26788K reserved) NR_IRQS:160 Detected MIPS clock frequency: 751 MHz (375.777 MHz counter) Console: colour dummy device 80x25 Calibrating delay loop... 749.56 BogoMIPS (lpj=374784) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 devtmpfs: initialized bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000) NET: Registered protocol family 16 USB0: power enable is active low; overcurrent is active low bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource wktmr FS-Cache: Loaded NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.22) msgmni has been set to 459 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 1655 0A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 1655 0A serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 1655 0A loop: module loaded brcmstb_nand: NAND controller driver is loaded Config internal EPHY through MDIO usbcore: registered new interface driver zd1201 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2 ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver usbcore: registered new interface driver btusb hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Key type dns_resolver registered EBI CS2: setting up NAND flash (primary) NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bi t), 512MiB, page size: 2048, OOB size: 64 brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BC H-1 Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 nand_read_bbt: bad block at 0x0000015a0000 nand_read_bbt: bad block at 0x000019b20000 Creating 3 MTD partitions on "brcmnand.0": 0x000000000000-0x00001f900000 : "rootfs" 0x000000000000-0x000020000000 : "entire_device" 0x00001f900000-0x00001ff00000 : "kernel" EBI CS0: setting up SPI flash spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address m25p80 spi0.0: found en25q32b, expected m25p80 m25p80 spi0.0: en25q32b (4096 Kbytes) Creating 6 MTD partitions on "spi0.0": 0x000000000000-0x000000080000 : "cfe" 0x000000080000-0x000000280000 : "splash" 0x000000280000-0x000000300000 : "macadr" 0x000000300000-0x000000380000 : "nvram" 0x000000380000-0x0000003c0000 : "bootconfig" 0x0000003c0000-0x000000400000 : "facconfig" PM: CP0 COUNT/COMPARE frequency depends on divisor UBI: attaching mtd0 to ubi0 usb 1-1: new high-speed USB device number 2 using ehci-brcm usb-storage 1-1:1.0: USB Mass Storage device detected scsi0 : usb-storage 1-1:1.0 usb 1-2: new high-speed USB device number 3 using ehci-brcm usb-storage 1-2:1.0: USB Mass Storage device detected scsi1 : usb-storage 1-2:1.0 scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 1974272 512-byte logical blocks: (1.01 GB/964 MiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Asking for cache data failed sd 1:0:0:0: [sdb] Assuming drive cache: write through sd 1:0:0:0: [sdb] Asking for cache data failed sd 1:0:0:0: [sdb] Assuming drive cache: write through sdb: sd 1:0:0:0: [sdb] Asking for cache data failed sd 1:0:0:0: [sdb] Assuming drive cache: write through sd 1:0:0:0: [sdb] Attached SCSI removable disk sd 0:0:0:0: [sda] 61457664 512-byte logical blocks: (31.4 GB/29.3 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk UBI: scanning is finished UBI: attached mtd0 (name "rootfs", size 505 MiB) to ubi0 UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 UBI: good PEBs: 4038, bad PEBs: 2, corrupted PEBs: 0 UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 UBI: max/mean erase counter: 11/7, WL threshold: 4096, image sequence number: 61 2002430 UBI: available PEBs: 0, total reserved PEBs: 4038, PEBs reserved for bad PEB han dling: 78 UBI: background thread "ubi_bgt0d" started, PID 52 UBI error: ubi_attach_mtd_dev: mtd0 is already attached to ubi0 UBI error: ubi_init: cannot attach mtd0 ALSA device list: No soundcards found. UBIFS: background thread "ubifs_bgt0_0" started, PID 53 UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/20 48 bytes UBIFS: FS size: 500920320 bytes (477 MiB, 3945 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) UBIFS: reserved for root: 0 bytes (0 KiB) UBIFS: media format: w4/r0 (latest is w4/r0), UUID 380E5902-4CFF-45BB-A3C7-12F5E 0EF9AD9, small LPT model VFS: Mounted root (ubifs filesystem) on device 0:10. devtmpfs: mounted Freeing unused kernel memory: 244K (80793000 - 807d0000) Algorithmics/MIPS FPU Emulator v1.5 INIT: version 2.88 booting /etc/init.d/rc: line 72: stty: command not found /etc/rcS.d/S02sysfs.sh: line 17: grep: command not found /etc/rcS.d/S02volatile-media.sh: line 13: grep: command not found /etc/rcS.d/S02volatile-media.sh: line 13: grep: command not found /etc/rcS.d/S04mdev: line 3: grep: command not found /etc/rcS.d/S04mdev: line 4: grep: command not found /etc/rcS.d/S04mdev: line 8: rm: command not found /etc/rcS.d/S04mdev: line 9: mknod: command not found /etc/rcS.d/S04mdev: line 10: mkdir: command not found mount: mount point /dev/pts does not exist /etc/rcS.d/S04mdev: line 19: touch: command not found /etc/rcS.d/S04mdev: line 23: mdev: command not found brcmnand brcmnand.0: corrected error at 0x448fc00 brcmnand brcmnand.0: corrected error at 0x448fc00 /etc/rcS.d/S04modutils.sh: line 19: uname: command not found /etc/rcS.d/S04modutils.sh: line 29: cat: command not found /etc/rcS.d/S04modutils.sh: line 29: cat: command not found /etc/rcS.d/S05modload.sh: line 6: find: command not found /etc/rcS.d/S05modload.sh: line 6: grep: command not found /dev/dvb/adapter0/video0: No such file or directory /etc/rcS.d/S06checkroot.sh: line 145: ln: command not found /etc/rcS.d/S06hotplug.sh: line 3: mdev: command not found /etc/rcS.d/S37populate-volatile.sh: line 12: dirname: command not found /etc/rcS.d/S37populate-volatile.sh: line 13: sed: command not found /etc/volatile.cache: line 2: mkdir: command not found /etc/volatile.cache: line 3: chown: command not found /etc/volatile.cache: line 4: chmod: command not found /etc/volatile.cache: line 6: mkdir: command not found /etc/volatile.cache: line 7: chown: command not found /etc/volatile.cache: line 8: chmod: command not found /etc/volatile.cache: line 10: mkdir: command not found /etc/volatile.cache: line 11: chown: command not found /etc/volatile.cache: line 12: chmod: command not found /etc/volatile.cache: line 14: mkdir: command not found /etc/volatile.cache: line 15: chown: command not found /etc/volatile.cache: line 16: chmod: command not found /etc/volatile.cache: line 18: mkdir: command not found /etc/volatile.cache: line 19: chown: command not found /etc/volatile.cache: line 20: chmod: command not found /etc/volatile.cache: line 23: readlink: command not found /etc/volatile.cache: line 23: readlink: command not found /etc/volatile.cache: line 37: readlink: command not found /etc/volatile.cache: line 37: readlink: command not found /etc/volatile.cache: line 51: readlink: command not found /etc/volatile.cache: line 51: readlink: command not found /etc/volatile.cache: line 65: readlink: command not found /etc/volatile.cache: line 65: readlink: command not found /etc/volatile.cache: line 79: readlink: command not found /etc/volatile.cache: line 79: readlink: command not found /etc/volatile.cache: line 92: mkdir: command not found /etc/volatile.cache: line 93: chown: command not found /etc/volatile.cache: line 94: chmod: command not found /etc/volatile.cache: line 96: touch: command not found /etc/volatile.cache: line 97: chown: command not found /etc/volatile.cache: line 98: chmod: command not found /etc/volatile.cache: line 100: touch: command not found /etc/volatile.cache: line 101: chown: command not found /etc/volatile.cache: line 102: chmod: command not found /etc/volatile.cache: line 104: touch: command not found /etc/volatile.cache: line 105: chown: command not found /etc/volatile.cache: line 106: chmod: command not found /etc/volatile.cache: line 108: touch: command not found /etc/volatile.cache: line 109: chown: command not found /etc/volatile.cache: line 110: chmod: command not found /etc/volatile.cache: line 112: touch: command not found /etc/volatile.cache: line 113: chown: command not found /etc/volatile.cache: line 114: chmod: command not found /etc/volatile.cache: line 116: touch: command not found /etc/volatile.cache: line 117: chown: command not found /etc/volatile.cache: line 118: chmod: command not found /etc/volatile.cache: line 120: mkdir: command not found /etc/volatile.cache: line 121: chown: command not found /etc/volatile.cache: line 122: chmod: command not found /etc/volatile.cache: line 124: mkdir: command not found /etc/volatile.cache: line 125: chown: command not found /etc/volatile.cache: line 126: chmod: command not found /etc/volatile.cache: line 128: mkdir: command not found /etc/volatile.cache: line 129: chown: command not found /etc/volatile.cache: line 130: chmod: command not found /etc/volatile.cache: line 132: mkdir: command not found /etc/volatile.cache: line 133: chown: command not found /etc/volatile.cache: line 134: chmod: command not found /etc/volatile.cache: line 136: mkdir: command not found /etc/volatile.cache: line 137: chown: command not found /etc/volatile.cache: line 138: chmod: command not found /etc/rcS.d/S37populate-volatile.sh: line 231: ln: command not found /etc/rcS.d/S38devpts.sh: line 13: grep: command not found /etc/rcS.d/S38dmesg.sh: line 17: /var/log/dmesg: No such file or directory ALSA: Restoring mixer settings... /etc/rcS.d/S39hostname.sh: line 10: /bin/hostname: No such file or directory /etc/rcS.d/S39hostname.sh: line 19: cat: command not found /etc/rcS.d/S39hostname.sh: line 19: hostname: command not found /usr/sbin/alsactl: state_lock:125: file /var/lib/alsa/asound.state lock error: N o such file or directory /usr/sbin/alsactl: load_state:1683: Cannot open /var/lib/alsa/asound.state for r eading: No such file or directory net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 vm.dirty_writeback_centisecs = 300 vm.dirty_background_ratio = 1 vm.min_free_kbytes = 8192 vm.dirty_ratio = 60 vm.swappiness = 30
Vielen Dank schonmal
-
Advertising
-
23.12.2016, 23:53 #2
- Registriert seit
- 23.03.2014
- Beiträge
- 10
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 91,36 MB
- Total Downloaded
- 91,36 MB
ThemenstarterHat sich erledigt!
Hatte noch einen zweiten USB-Stick drin, als der raus war konnte ich flashen!
Lesezeichen