Thanks Thanks:  0
Ergebnis 1 bis 2 von 2
  1. #1
    Anfänger
    Registriert seit
    23.03.2014
    Beiträge
    10
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    91,36 MB
    Total Downloaded
    91,36 MB
    ReceiverDanke

    LX1 bootet nicht

    Hallo,

    habe gerade ein Online-Update durchgeführt und beim anschließenden Reboot blieb die Box hängen. Im Display steht boot. Flashen über USB ist nicht möglich. Folgendes habe ich über RS232 ausgelesen.

    Code:
    BCM735800011 00000001
    234#!@
    M0
    WLCT 0000000001
    
    
    
    
    SHMOO VER MSA 16b 1.12
    
    
    PKID 16020112 20120406 003B6000 003B0000 001B103F 00001C00
    
    
    S300001CF
    S000013A0
    
    
    RDLY  WL 0 0000000004
    
    
    RDEN  WL 0 0000000039
    
    
    RDQS  WL 0
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-
     01 --------------------++++++++++++++++++++++X+++++++++++++++++++++
     02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
     03 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
     04 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++----
     05 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     06 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     07 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     08 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++----
     09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++--
     10 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
     11 ------------++++++++++++++++++++++++X++++++++++++++++++++++++---
     12 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
     13 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++---
     14 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-
     15 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
    
    
    
    
    P  WL 0
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
     01 --------------------++++++++++++++++++++++X+++++++++++++++++++++
     02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
     03 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
     04 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
     05 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
     06 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
     07 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     08 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
     09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
     10 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
     11 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
     12 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
     13 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     14 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
     15 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
    
    
    
    
    N  WL 0
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-
     01 --------------------++++++++++++++++++++++X+++++++++++++++++++++
     02 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
     03 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     04 ----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++----
     05 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
     06 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
     07 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
     08 ----++++++++++++++++++++++++++++X++++++++++++++++++++++++++++---
     09 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++--
     10 -----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
     11 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
     12 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
     13 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
     14 -------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++-
     15 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
    
    
    
    
    WRDQ  WL 0
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 +++++++++++++++++++++++++X++++++++++++++++++++++++----++++++++++
     01 -----++++++++++++++++++++++X+++++++++++++++++++++--------------+
     02 ++++++++++++++++++++++++X++++++++++++++++++++++++-------++++++++
     03 +++++++++++++++++++++++++X++++++++++++++++++++++++------++++++++
     04 ++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++++
     05 +++++++++++++++++++++++++X++++++++++++++++++++++++-----+++++++++
     06 ++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++++
     07 +++++++++++++++++++++++++X+++++++++++++++++++++++++-----++++++++
     08 +++++++++++++++++++++++++X+++++++++++++++++++++++++---++++++++++
     09 -++++++++++++++++++++++++X+++++++++++++++++++++++---------++++++
     10 ++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++++
     11 ++++++++++++++++++++++++X++++++++++++++++++++++++--------+++++++
     12 +++++++++++++++++++++++++X++++++++++++++++++++++++----++++++++++
     13 +++++++++++++++++++++++++X+++++++++++++++++++++++++--------+++++
     14 ++++++++++++++++++++++++X++++++++++++++++++++++++------+++++++++
     15 +++++++++++++++++++++++++X++++++++++++++++++++++++-------+++++++
    
    
    
    
    WRDM  WL 0 0000000024
    WRDM  WL 0 0000000024
    
    
    
    
    ADDR
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 +++++++++++++++++++S++++++++X++++++++++++++++++++++++++++-------
    
    
    B03B6054
    567#!@#@
    
    
    BCM97358A1 CFE v4.144, CFE core v4.29, Endian Mode: Little
    Build Date: Mon Jul  7 08:24:59 CEST 2014 (paul@ini)
    Copyright (C) Broadcom Corporation.
    
    
    Enabling NAND flash at CS2.
    BCHP_NAND_FLASH_DEVICE_ID =0xecdc1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x54ececd
    c
    CPU speed:       751MHz
    Total memory(0): 512MB
    DDR Freq:        800 MHz
    DDR Mode:        DDR3
    MEMC 0 DEV SIZE: 2GBIT
    MEMC 0 DDR Width:16
    MEMC 0 DEV Width:8
    Boot Device:     SPI
    Total flash:     4MB
    
    
    Initializing USB.
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    
    
    CFE initialized.
    USB: New device connected to bus 0 hub 1 port 1
    USB: Resetting device on bus 0 hub 1 port 1
    USB: Locating Class 08 Vendor 0951 Product 1665: Mass-Storage Device
    USBMASS: Unit 0 connected
    USB: New device connected to bus 0 hub 1 port 2
    USB: Resetting device on bus 0 hub 1 port 2
    USB: Locating Class 08 Vendor 1307 Product 0165: Mass-Storage Device
    USBMASS: Unit 1 connected
    *** Kingston DataTraveler 2.0  (31468 MB, lbs=512) ***
    *** Could not find a valid partition...status=00000000, ids=83000000!
    dir: Could not init file system: File system not recognized
    
    
    [FLASH-TOOL] Searching update files...
    *** Could not find a valid partition...status=00000000, ids=83000000!
    
    
    [FLASH-TOOL] Could not init file system: File system not recognized
    
    
    [FLASH-TOOL] There are not any update files...
    
    
    Booting...
    Starting splash screen.
    Found splash image - Width = 720 Height = 576
    Non Interlaced Replace list 043e8680 0c800000Interlaced Replace list 043e8c20 0c
    8005a0
    Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:ubi.mtd=0 root=ubi0:r
    ootfs rootfstype=ubifs rw bmem=256M@512M
    Loading: 0x80001000/8124340 0x807c07b4/177644 Entry address is 0x8060d3d0
    Starting program at 0x8060d3d0
    
    
    Initializing cgroup subsys cpuset
    Linux version 3.12.1 (oe1@BUILD3) (gcc version 5.3.0 (GCC) ) #1 Thu Jul 7 19:41:
    38 CEST 2016
    Fetching vars from bootloader... found 10 vars.
    Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
             sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
    Using 512 MB + 0 MB RAM (from CFE)
    MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
    CPU revision is: 00029032 (Broadcom BMIPS3300)
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
    bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
    Zone ranges:
      Normal   [mem 0x00000000-0x0fffffff]
    Movable zone start for each node
    Early memory node ranges
      node   0: [mem 0x00000000-0x0fffffff]
    Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
    Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    Kernel command line: ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw bmem=256M@51
    2M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M cons
    ole=ttyS0,115200n8
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 235356K/262144K available (6227K kernel code, 295K rwdata, 1220K rodata,
     244K init, 111K bss, 26788K reserved)
    NR_IRQS:160
    Detected MIPS clock frequency: 751 MHz (375.777 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    devtmpfs: initialized
    bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
    NET: Registered protocol family 16
    USB0: power enable is active low; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switched to clocksource wktmr
    FS-Cache: Loaded
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP: reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.22)
    msgmni has been set to 459
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 1655
    0A
    console [ttyS0] enabled
    serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 1655
    0A
    serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 1655
    0A
    loop: module loaded
    brcmstb_nand: NAND controller driver is loaded
    Config internal EPHY through MDIO
    usbcore: registered new interface driver zd1201
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    EBI CS2: setting up NAND flash (primary)
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bi
    t), 512MiB, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BC
    H-1
    
    
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    nand_read_bbt: bad block at 0x0000015a0000
    nand_read_bbt: bad block at 0x000019b20000
    Creating 3 MTD partitions on "brcmnand.0":
    0x000000000000-0x00001f900000 : "rootfs"
    0x000000000000-0x000020000000 : "entire_device"
    0x00001f900000-0x00001ff00000 : "kernel"
    EBI CS0: setting up SPI flash
    spi_brcmstb spi_brcmstb.0: master is unqueued, this is deprecated
    spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    m25p80 spi0.0: found en25q32b, expected m25p80
    m25p80 spi0.0: en25q32b (4096 Kbytes)
    Creating 6 MTD partitions on "spi0.0":
    0x000000000000-0x000000080000 : "cfe"
    0x000000080000-0x000000280000 : "splash"
    0x000000280000-0x000000300000 : "macadr"
    0x000000300000-0x000000380000 : "nvram"
    0x000000380000-0x0000003c0000 : "bootconfig"
    0x0000003c0000-0x000000400000 : "facconfig"
    PM: CP0 COUNT/COMPARE frequency depends on divisor
    UBI: attaching mtd0 to ubi0
    usb 1-1: new high-speed USB device number 2 using ehci-brcm
    usb-storage 1-1:1.0: USB Mass Storage device detected
    scsi0 : usb-storage 1-1:1.0
    usb 1-2: new high-speed USB device number 3 using ehci-brcm
    usb-storage 1-2:1.0: USB Mass Storage device detected
    scsi1 : usb-storage 1-2:1.0
    scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Direct-Access                               0.00 PQ: 0 ANSI: 2
    sd 1:0:0:0: Attached scsi generic sg1 type 0
    sd 1:0:0:0: [sdb] 1974272 512-byte logical blocks: (1.01 GB/964 MiB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Asking for cache data failed
    sd 1:0:0:0: [sdb] Assuming drive cache: write through
    sd 1:0:0:0: [sdb] Asking for cache data failed
    sd 1:0:0:0: [sdb] Assuming drive cache: write through
     sdb:
    sd 1:0:0:0: [sdb] Asking for cache data failed
    sd 1:0:0:0: [sdb] Assuming drive cache: write through
    sd 1:0:0:0: [sdb] Attached SCSI removable disk
    sd 0:0:0:0: [sda] 61457664 512-byte logical blocks: (31.4 GB/29.3 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] No Caching mode page found
    sd 0:0:0:0: [sda] Assuming drive cache: write through
    sd 0:0:0:0: [sda] No Caching mode page found
    sd 0:0:0:0: [sda] Assuming drive cache: write through
     sda: sda1
    sd 0:0:0:0: [sda] No Caching mode page found
    sd 0:0:0:0: [sda] Assuming drive cache: write through
    sd 0:0:0:0: [sda] Attached SCSI removable disk
    UBI: scanning is finished
    UBI: attached mtd0 (name "rootfs", size 505 MiB) to ubi0
    UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    UBI: good PEBs: 4038, bad PEBs: 2, corrupted PEBs: 0
    UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    UBI: max/mean erase counter: 11/7, WL threshold: 4096, image sequence number: 61
    2002430
    UBI: available PEBs: 0, total reserved PEBs: 4038, PEBs reserved for bad PEB han
    dling: 78
    UBI: background thread "ubi_bgt0d" started, PID 52
    UBI error: ubi_attach_mtd_dev: mtd0 is already attached to ubi0
    UBI error: ubi_init: cannot attach mtd0
    ALSA device list:
      No soundcards found.
    UBIFS: background thread "ubifs_bgt0_0" started, PID 53
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/20
    48 bytes
    UBIFS: FS size: 500920320 bytes (477 MiB, 3945 LEBs), journal size 9023488 bytes
     (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID 380E5902-4CFF-45BB-A3C7-12F5E
    0EF9AD9, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:10.
    devtmpfs: mounted
    Freeing unused kernel memory: 244K (80793000 - 807d0000)
    Algorithmics/MIPS FPU Emulator v1.5
    INIT: version 2.88 booting
    /etc/init.d/rc: line 72: stty: command not found
    /etc/rcS.d/S02sysfs.sh: line 17: grep: command not found
    /etc/rcS.d/S02volatile-media.sh: line 13: grep: command not found
    /etc/rcS.d/S02volatile-media.sh: line 13: grep: command not found
    /etc/rcS.d/S04mdev: line 3: grep: command not found
    /etc/rcS.d/S04mdev: line 4: grep: command not found
    /etc/rcS.d/S04mdev: line 8: rm: command not found
    /etc/rcS.d/S04mdev: line 9: mknod: command not found
    /etc/rcS.d/S04mdev: line 10: mkdir: command not found
    mount: mount point /dev/pts does not exist
    /etc/rcS.d/S04mdev: line 19: touch: command not found
    /etc/rcS.d/S04mdev: line 23: mdev: command not found
    brcmnand brcmnand.0: corrected error at 0x448fc00
    brcmnand brcmnand.0: corrected error at 0x448fc00
    /etc/rcS.d/S04modutils.sh: line 19: uname: command not found
    /etc/rcS.d/S04modutils.sh: line 29: cat: command not found
    /etc/rcS.d/S04modutils.sh: line 29: cat: command not found
    /etc/rcS.d/S05modload.sh: line 6: find: command not found
    /etc/rcS.d/S05modload.sh: line 6: grep: command not found
    /dev/dvb/adapter0/video0: No such file or directory
    /etc/rcS.d/S06checkroot.sh: line 145: ln: command not found
    /etc/rcS.d/S06hotplug.sh: line 3: mdev: command not found
    /etc/rcS.d/S37populate-volatile.sh: line 12: dirname: command not found
    /etc/rcS.d/S37populate-volatile.sh: line 13: sed: command not found
    /etc/volatile.cache: line 2: mkdir: command not found
    /etc/volatile.cache: line 3: chown: command not found
    /etc/volatile.cache: line 4: chmod: command not found
    /etc/volatile.cache: line 6: mkdir: command not found
    /etc/volatile.cache: line 7: chown: command not found
    /etc/volatile.cache: line 8: chmod: command not found
    /etc/volatile.cache: line 10: mkdir: command not found
    /etc/volatile.cache: line 11: chown: command not found
    /etc/volatile.cache: line 12: chmod: command not found
    /etc/volatile.cache: line 14: mkdir: command not found
    /etc/volatile.cache: line 15: chown: command not found
    /etc/volatile.cache: line 16: chmod: command not found
    /etc/volatile.cache: line 18: mkdir: command not found
    /etc/volatile.cache: line 19: chown: command not found
    /etc/volatile.cache: line 20: chmod: command not found
    /etc/volatile.cache: line 23: readlink: command not found
    /etc/volatile.cache: line 23: readlink: command not found
    /etc/volatile.cache: line 37: readlink: command not found
    /etc/volatile.cache: line 37: readlink: command not found
    /etc/volatile.cache: line 51: readlink: command not found
    /etc/volatile.cache: line 51: readlink: command not found
    /etc/volatile.cache: line 65: readlink: command not found
    /etc/volatile.cache: line 65: readlink: command not found
    /etc/volatile.cache: line 79: readlink: command not found
    /etc/volatile.cache: line 79: readlink: command not found
    /etc/volatile.cache: line 92: mkdir: command not found
    /etc/volatile.cache: line 93: chown: command not found
    /etc/volatile.cache: line 94: chmod: command not found
    /etc/volatile.cache: line 96: touch: command not found
    /etc/volatile.cache: line 97: chown: command not found
    /etc/volatile.cache: line 98: chmod: command not found
    /etc/volatile.cache: line 100: touch: command not found
    /etc/volatile.cache: line 101: chown: command not found
    /etc/volatile.cache: line 102: chmod: command not found
    /etc/volatile.cache: line 104: touch: command not found
    /etc/volatile.cache: line 105: chown: command not found
    /etc/volatile.cache: line 106: chmod: command not found
    /etc/volatile.cache: line 108: touch: command not found
    /etc/volatile.cache: line 109: chown: command not found
    /etc/volatile.cache: line 110: chmod: command not found
    /etc/volatile.cache: line 112: touch: command not found
    /etc/volatile.cache: line 113: chown: command not found
    /etc/volatile.cache: line 114: chmod: command not found
    /etc/volatile.cache: line 116: touch: command not found
    /etc/volatile.cache: line 117: chown: command not found
    /etc/volatile.cache: line 118: chmod: command not found
    /etc/volatile.cache: line 120: mkdir: command not found
    /etc/volatile.cache: line 121: chown: command not found
    /etc/volatile.cache: line 122: chmod: command not found
    /etc/volatile.cache: line 124: mkdir: command not found
    /etc/volatile.cache: line 125: chown: command not found
    /etc/volatile.cache: line 126: chmod: command not found
    /etc/volatile.cache: line 128: mkdir: command not found
    /etc/volatile.cache: line 129: chown: command not found
    /etc/volatile.cache: line 130: chmod: command not found
    /etc/volatile.cache: line 132: mkdir: command not found
    /etc/volatile.cache: line 133: chown: command not found
    /etc/volatile.cache: line 134: chmod: command not found
    /etc/volatile.cache: line 136: mkdir: command not found
    /etc/volatile.cache: line 137: chown: command not found
    /etc/volatile.cache: line 138: chmod: command not found
    /etc/rcS.d/S37populate-volatile.sh: line 231: ln: command not found
    /etc/rcS.d/S38devpts.sh: line 13: grep: command not found
    /etc/rcS.d/S38dmesg.sh: line 17: /var/log/dmesg: No such file or directory
    ALSA: Restoring mixer settings...
    /etc/rcS.d/S39hostname.sh: line 10: /bin/hostname: No such file or directory
    /etc/rcS.d/S39hostname.sh: line 19: cat: command not found
    /etc/rcS.d/S39hostname.sh: line 19: hostname: command not found
    /usr/sbin/alsactl: state_lock:125: file /var/lib/alsa/asound.state lock error: N
    o such file or directory
    /usr/sbin/alsactl: load_state:1683: Cannot open /var/lib/alsa/asound.state for r
    eading: No such file or directory
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.all.rp_filter = 1
    vm.dirty_writeback_centisecs = 300
    vm.dirty_background_ratio = 1
    vm.min_free_kbytes = 8192
    vm.dirty_ratio = 60
    vm.swappiness = 30
    Kann man da über RS232 nocht etwas retten? Gibt es vll. ein Recovery-Image oder so?

    Vielen Dank schonmal

    •   Alt Advertising

       

  2. #2
    Anfänger
    Registriert seit
    23.03.2014
    Beiträge
    10
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Themenstarter
    Total Downloaded
    91,36 MB
    Total Downloaded
    91,36 MB
    ReceiverDanke
    Hat sich erledigt!

    Hatte noch einen zweiten USB-Stick drin, als der raus war konnte ich flashen!


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 10:03 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,88%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com