Thanks: 0
Ergebnis 1 bis 5 von 5
-
04.04.2013, 20:49 #1
- Registriert seit
- 04.04.2013
- Beiträge
- 1.165
- Thanks (gegeben)
- 1297
- Thanks (bekommen)
- 817
- Total Downloaded
- 3,54 MB
- Total Downloaded
- 3,54 MB
[Howto] GB800 SOLO/SE VFD setup
To get the channel number on the VFD you need to set "Show Clock" to the value "in Standby: yes" or "in Standby: no". (look at the screenshots)
After that it needs a zap or you wait for a channel info update.
I will explain the 4 modes of "Show Clock"
- Aus => VFD complete off, no matter standby or not
- Ja => shows the clock always on the VFD, also in standby
- in Standby: yes => show channel number, shows only the clock in stanby
- in Standby: no => show channel number, switch off vfd in stanby
-
Advertising
-
05.05.2013, 21:21 #2
- Registriert seit
- 05.05.2013
- Beiträge
- 10
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 0
- Total Downloaded
- 23,77 MB
- Total Downloaded
- 23,77 MB
Hey,
i flashed my 800 Se with the newest image today. Maybe i`m too stupid for the right VFD-setup. So her is my question: I only get the channelnumber in my dysplay when I switch to another channel. The number blinks for 2 times and after that there is nothing. Is this wanted or is it also possible that the channelnumber is shown permant on the display?
Thx and best regards,
MprL
-
05.05.2013, 21:31 #3
- Registriert seit
- 04.04.2013
- Beiträge
- 1.165
- Thanks (gegeben)
- 1297
- Thanks (bekommen)
- 817
- Total Downloaded
- 3,54 MB
- Total Downloaded
- 3,54 MB
ThemenstarterNo no, your are not to stupid.
It seems we have a little problem with the vfd.
We made some change the last week but there are stil some bugs.
There are some reports that this happens when you use a different skin.
Can you try the default skin? Or are you already using the default skin?
-
05.05.2013, 21:34 #4
- Registriert seit
- 05.05.2013
- Beiträge
- 10
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 0
- Total Downloaded
- 23,77 MB
- Total Downloaded
- 23,77 MB
Glad to hear that ;-)
I got the issue with the default and Metrix skin and noticed it right after the flash where only the default skin was installed.
-
19.05.2013, 00:29 #5
- Registriert seit
- 05.05.2013
- Beiträge
- 10
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 0
- Total Downloaded
- 23,77 MB
- Total Downloaded
- 23,77 MB
Anything new here? With the default skin it works fine now but with other skins (In my case MetrixHD) the issue still excists....
Ähnliche Themen
-
Gs bei rts hd mit solo 2
Von ciccio81 im Forum VU+ Solo 2Antworten: 5Letzter Beitrag: 15.08.2013, 21:20
Lesezeichen